Related
Hello, I have some problems with my mob.phone HTC HD2: after using Flash mobile stop working, then I tried install windows and tried turn on first time and my phone shows white screan with name HTC and don`t work at all,then i tried reset and Hard reset all setings and turn on again and than screan appears again with name HTC.
When i conect my phone to pc by usb, so my pc can`t find that phone.
Can you help me with this problem.
Thank you.
you should get your stock rom, ONLY your stock rom, extract the file ruu_signed.nbh
copy that file to your sd card formatted to fat 32 rename the file to leoimg.nbh
phone off
hold volume down
tap power (keep volume held)
phone should boot to three colors screen and start to flash.
this will ONLY work with original rom.
Thanks for Help.
Same problem......
I am also stuck in the white HTC screen, (R 2.06.51.07 G 15.30.50.07U D 1.66.76641). I can flash from SD card and so i tried, using the image in the latest official RRU, no way, it doesn't fix the problem.
I didnt try any unofficial rom, i just updated to the latest rom from HTC, it worked fine. The problem occurs after i had to restart the phone while trying to connect to a xifi AP...
Any idea what i should try now ?
Thanks. You saved my day.
samsamuel said:
you should get your stock rom, ONLY your stock rom, extract the file ruu_signed.nbh
copy that file to your sd card formatted to fat 32 rename the file to leoimg.nbh
phone off
hold volume down
tap power (keep volume held)
phone should boot to three colors screen and start to flash.
this will ONLY work with original rom.
Click to expand...
Click to collapse
OMG! Thank you so much! I love you!!!!!! I was stuck on boot because my flash failed and i followed your instructions and now i can flash again!!! i was so worried and if it weren't for you i would be screwed. Really you are a HUGE help! Keep the good work up
how long did you guys have to wait till the htc rebooted after that flash? cause ive been waiting for over 30 minutes and i thought i made that wrong.
Note: ive used HSPL fist, then flashed it with energyleo.23547, but energyleo kept stuck in bootloader
now im pretty afraid of loosing manufactors warranty ...
well lads, pay attention: ive fixed that my problem all by myself. HINT: ive kept holding the buttons for to long, so the device got stock while starting up. so dont press the voldown-button for too long, maybe only for 2 seconds!
hard reset
Remember boys and girls - if you get stuck on the bootloader you can also do the following:
1. Remove the battery to turn the phone off, leave 3 seconds
2. Replace battery and hold down the vol down button and turn on your device to get into the bootloader
3. It should say 'serial'. Plug your USB cable in and it'll change to 'USB'
4. Flash your stock ROM as normal using ActiveSync method. This will also reinstall the SPL (in the case of people who can't get past the first white HTC screen). I did this after the first (and only) time I tried to do it the SD card method. Put my stock SPL back on my phone
EddyOS said:
4. Flash your stock ROM as normal using ActiveSync method. This will also reinstall the SPL (in the case of people who can't get past the first white HTC screen). I did this after the first (and only) time I tried to do it the SD card method. Put my stock SPL back on my phone
Click to expand...
Click to collapse
im pretty sure that flashing over usb won't do the spl. only sd card flashing can touch the spl.
When I tried to flash (after installing HSPL) using the sd card method and it bricked I went into the bootloader and it put my stock SPL back on - hence why I said if the sd card fails
EddyOS said:
When I tried to flash (after installing HSPL) using the sd card method and it bricked I went into the bootloader and it put my stock SPL back on - hence why I said if the sd card fails
Click to expand...
Click to collapse
I'd be inclined to suspect that In your case the spl was flashed during the failed sd card flash, so was already stock spl when you then flashed the stock rom over usb.(which of course being stock doesn't need hspl )
Hi Guys
I'm having the same problem, however, I bought the phone second hand. My question is how do I find out what my stock ROM is?
cheers
buddyrich_1 said:
Hi Guys
I'm having the same problem, however, I bought the phone second hand. My question is how do I find out what my stock ROM is?
cheers
Click to expand...
Click to collapse
you download HSPL, run it, and if your spl is anything else than 1.42 it will give out an error and no harm is done
Hey
Thanks for replying. Do I get the stock ROM from the HTC website, is there a way to get it as a .nbh file as I am currently on a mac.
thanks
Tokolosh said:
you download HSPL, run it, and if your spl is anything else than 1.42 it will give out an error and no harm is done
Click to expand...
Click to collapse
White Screen and HTC logo
I have found a similar problem, I flashed the HSPL rom following the instructions to the letter in the NOOB section.
Restarted my HTC HD2 having hard reset, and it would start and begin the installation and setup, once the setup completes, the software requests a soft reset, at this point my phone hangs on the white boot up screen with the HTC logo.
What am I doing wrong?
Stuck on White HTC Screen after ROM update
Why is it that, having run the HSPL update on my HD2 and checked that its successful, does my phone hang on the white HTC boot screen when it reboots after setup.
I have installed the energy rom, the most recent version. It still hangs at the boot after the rom does the soft reset...
Help please?
jrmgolem said:
Why is it that, having run the HSPL update on my HD2 and checked that its successful, does my phone hang on the white HTC boot screen when it reboots after setup.
I have installed the energy rom, the most recent version. It still hangs at the boot after the rom does the soft reset...
Help please?
Click to expand...
Click to collapse
you have installed the required radio yet?if not, boot to bootloader, flash teh radio via usb, , , restart the phone.
samsamuel said:
you have installed the required radio yet?if not, boot to bootloader, flash teh radio via usb, , , restart the phone.
Click to expand...
Click to collapse
I have now installed a 'Leo_RADIO_15.31.50.07U_2.07.51.05 **(from HTC **???? )' then re-installed the Energy Rom, but still getting stuck at the white boot screen after the first reboot, so I have now done a hard reset and the phone still hangs...
Any more ideas?
My device spec -
HTC HD2 - SPL-1.42.HSPL
Cotulla HSPL
Radio 2.08
ROM - Energy Series 23554 6.5.5
I had the phone on charge, I took it of the charger to make a call and found it had frozen. Removed the battery and restarted the handset and got the WSOD. This has happened before and I simply put it into bootloader mode and reset which fixed it. This time though this did not work. Now I have a HD2 stuck on WSOD when powered on.
If I try to flash it I have to have it in bootloader mode and connect it to the usb. However it gets to the loading screen and goes no further (left it on for 20 minutes). I am able to flash through the storage card which shows success, but when the handset is restarted again all I get is WSOD. Because of this I am unable to flash a OEM Rom, have downloaded the official Rom from HTC support and even extacted the nbh file and copied to my storage card, but it will not run. I can see that it tries to execute the flash but then goes straight into bootloader mode.
I have tried to run task29 but again because it has to be run through the usb it does not run past o%. I have also tried and am still trying mtty, but Windows 7 refuses to install the drivers provided in the post, and so am unable to loacate the device under USB. Is there anything else I could try to revive my HD2?
Thanks in advance for any help
try hspl2 to hspl 2.08 for rom NRG.after flach back NRG
Ok thanks will try that. I just extracted the nbh from the official Rom renamed it to LEOIMG.nbh and ran from the storage card. It started to run then stopped with the error- "Update Termintate UPDATE FAIL"
Any ideas....
Are you sure you have HSPL and not SPL? Double check, I made the same mistake before and it sits on 0%. If you have HSPL I would flash HSPL2 2.08 HSPL and try again.
Give this a go..!!!
Bro don't flash through the memory card..!!!
Just use the PC Platform method & flash the original ROM, I am 100% sure it'll work..!!!
Just lemme know if works for you..!!!
Best of LUCK..!!!
PS : - You gotta go to the BOOT LOADER & flash..!!!
Thanks for all your help. I used HSPL2 and updated to 2.08 and all is fine now. Gonna run a task29 now and reload the Rom.
Thanks again guys, amazing as ever!!!!
Cool, njoy flashing now..!!!
MOD's please close this thread..!!!
I have looked all around this forum, google, and youtube. my phone is running on cyanogen 6.1 via nand. I would like to go back to winmo so i can send it back to t mobile because the vibration stopped working. Tutorials, DL links will help.
From the Flashing NAND roms tutorial (link in my signature)
5. UNINSTALLING MAGLDR AND NAND ANDROID (FLASHING WINMO BACK TO NAND)
To uninstall Magldr and any Android Rom that you installed to NAND, do the following:
1. Download a Stock Rom from *HERE* or a Custom Rom from the HD2 Rom Development Forum (for LEO512 ONLY, LEO1024 users will have to use a TMOUS compatable Stock or Custom Rom that is LEO1024 compatable).
2. Enter Bootloader Mode by taking the battery out, then put it back in and hold down the 'Volume Down' button while briefly pressing the power button.
3. After the phone enters the Bootloader Screen, plug in the usb cable so it says usb at the bottom of the screen
4. Run the Stock Roms .exe file (or run the customruu.exe file of the Custom Rom you want to flash)
* This will flash a Stock Rom and Radio while keeping your HardSPL untouched *
Click to expand...
Click to collapse
i think i love you
Yea but that will not remove the HSPL. If you have the latest HSPL you need to open it back up after you load the stock rom and then install the one that is 2.08.0000 at the end of it. Now they will have no Idea. As for the stock rom I just downloaded the one from T-mobile. (www.t-mobile.com/wmupgrade)
Then press the "Thanks" button for him to boost his meter.
i download the stock rom and then how do i do it? im usually an apple guy, im new to android.
If you are using a 512MB ROM HD2, just download the official firmware from HTC's website. The recommendation is to use a 1.xx or 2.xx ROM, do not use a 3.xx ROM.
Download 7-zip, make sure it is 9.20 version and up.
Using 7-zip, open the official ROM update exe file. Do not execute it.
Inside you will see RUU_signed.nbh, extract just that file. Nothing else.
rename RUU_signed.nbh, to leoimg.nbh
Copy leoimg.nbh into your SD card which is FAT16 or FAT32 formatted.
Unplug the battery from the HD2, count to 10, replace the battery.
Hold the VOLUME DOWN button, DO NOT LET GO.
Press the POWER BUTTON, then let go.
Follow the instructions on the screen when the device goes to RECOVERY mode.
Please note, this method will remove your HSPL and replace it with official SPL. It will also over-write your RADIO and ROM.
Everything will be as it is stated, a full factory recover.
I am trying todo this on my hd2, to get it back to "stock" wm6.5.
I am having some problems with this. I can get into the bootloader and from my pc initiate the flash. But then it just hangs at 0%.
Anyone got any ideas to what i can do to get it back to "stock" wm6.5 from Android?
Do you still have hspl installed? Are you using the orignal stock rom for your device? Try putting device into bootloader mode first and then connect to your pc, does usb appear on the phone screen when connected?
I can boot it into the bootloader.. I've got SPL 2.08 installed atm on it.
It does register USB when i plug it in.
When i then start the ROMUpdateUtility.exe from the extracted ROM, and follow the steps, the screen changes to the HTC flash screen, and stops. Nothing happens at all.
I have flashed it with MAGLDR 1.11 to get android on it. I run into the same issues if i want to try and upgrade it to 1.12. I cant remember my radio version.
zatoor said:
I can boot it into the bootloader.. I've got SPL 2.08 installed atm on it.
It does register USB when i plug it in.
When i then start the ROMUpdateUtility.exe from the extracted ROM, and follow the steps, the screen changes to the HTC flash screen, and stops. Nothing happens at all.
I have flashed it with MAGLDR 1.11 to get android on it. I run into the same issues if i want to try and upgrade it to 1.12. I cant remember my radio version.
Click to expand...
Click to collapse
If you're having problems running the flasher executable, try the method mentioned by LiFE1688 above.
I am trying that one out at the moment.
It boots into recovery, but just hangs at "Loading ...."
I have downloaded the 1.66 official rom, not trying the latest 3.04, since that was not recommended.
zatoor said:
I can boot it into the bootloader.. I've got SPL 2.08 installed atm on it.
It does register USB when i plug it in.
When i then start the ROMUpdateUtility.exe from the extracted ROM, and follow the steps, the screen changes to the HTC flash screen, and stops. Nothing happens at all.
I have flashed it with MAGLDR 1.11 to get android on it. I run into the same issues if i want to try and upgrade it to 1.12. I cant remember my radio version.
Click to expand...
Click to collapse
zatoor said:
I am trying that one out at the moment.
It boots into recovery, but just hangs at "Loading ...."
I have downloaded the 1.66 official rom, not trying the latest 3.04, since that was not recommended.
Click to expand...
Click to collapse
Do you have spl 2.08.0000 or 2.08.hspl installed? You need the latter one if you are flashing a rom which is not officially meant for your phone.
That did the trick. Thank you very much.
zatoor said:
That did the trick. Thank you very much.
Click to expand...
Click to collapse
+1 Thank you!
I tried to reinstall it & my phone turned off. Now it won't reboot. I think it's broken now. Any suggestions?
You will also have to remove HSPL as it is a customized Special Program Loader. Just flash using the .nbh files and that should overwrite the HSPL with the stock SPL. If you use Customruu directly (without modifications) it will not replace the HSPL.
you have to make sure to use a 2gb sd card or less or else it wont work
LiFE1688 said:
If you are using a 512MB ROM HD2, just download the official firmware from HTC's website. The recommendation is to use a 1.xx or 2.xx ROM, do not use a 3.xx ROM.
Download 7-zip, make sure it is 9.20 version and up.
Using 7-zip, open the official ROM update exe file. Do not execute it.
Inside you will see RUU_signed.nbh, extract just that file. Nothing else.
rename RUU_signed.nbh, to leoimg.nbh
Copy leoimg.nbh into your SD card which is FAT16 or FAT32 formatted.
Unplug the battery from the HD2, count to 10, replace the battery.
Hold the VOLUME DOWN button, DO NOT LET GO.
Press the POWER BUTTON, then let go.
Follow the instructions on the screen when the device goes to RECOVERY mode.
Please note, this method will remove your HSPL and replace it with official SPL. It will also over-write your RADIO and ROM.
Everything will be as it is stated, a full factory recover.
Click to expand...
Click to collapse
Will this process delete everything from the sd card? Im going to do this process to sell to someone on craigslist and i dont want anything (contacts, texts, pics, etc) to be able to be accessed or seen.
Thanks!
ClydeB1 said:
From the Flashing NAND roms tutorial (link in my signature)
Click to expand...
Click to collapse
I cant find that link,
can you please post it here.
Thank you in advance....
I have HTC HD2 wich I want to rollback to Win mobile, I have androind on it wright now.
Hi there
I got an HD2 from a friend (he bought off ebay) and seems to just boot to the Tmobile sticking together logo and won't boot.
I don't think it charges as well...
there was no lines (radio?) at the bottom of the Sticking Together pink square screen...
is this phone bricked? or can I still flash a rom?
Ok try this, turn the phone off then hold the low volume botton n the power botton at the same time, n if it takes u to the bootloader then u r good, just search on how to install a rom of ur choise, good luck
Sent from my HTC HD2 using XDA Premium App
froibet said:
Hi there
I got an HD2 from a friend (he bought off ebay) and seems to just boot to the Tmobile sticking together logo and won't boot.
I don't think it charges as well...
there was no lines (radio?) at the bottom of the Sticking Together pink square screen...
is this phone bricked? or can I still flash a rom?
Click to expand...
Click to collapse
Well the fact that it will even turn on means it is not bricked. A bricked HD2 will not even turn on the most it will do is flash tihe led light and vibrait a couple of times.
Follow the instructions of the above post and pull up bootloader, if bootloader comes up you can save the HD2. Depending on if you want to flash a official srock ROM or a custom ROM to the HD2 will dictate your next step.
If you want a official stock ROM then just download and flash the official update from T-Mobile.com just type in HTC HD2 update in the search box on the home page and you will find it. You will have to enter the IMEI number to download it wich you can find this number behind the battery. To flash it connect the HD2 to a computer via USB cable while in bootloader and wait for the serial in the white bar at the bottom of the bootloader screen to change to USB and the computer to show it recognizes the HD2 then run the update utility and follow all the on screen instructions.
If you want to flash a custom ROM as in custom Windows Mobile, NAND Andriod ROM, or Windows Phone 7 ROM then you will have to flash HSPL to the HD2. Download HSPL4 and flash 2.08 HSPL if hou want to flash a NAND Andriod ROM as MAGLDR only supports 2.08 HSPL. Or a Windows Phone 7 Rom, or flash 3.03 if you just want to flash a custom Windows Mobile ROM.
Now if you want a NAND Andriod ROM or Windows Phone 7 you will have to download MAGLDR and flash it to the HD2.
If you want a custom Windows Mobile ROM download the ROM of your choice and fladh it using the .exe or RUU wich ever one the ROM has. Note do all flashing of what I have previously mentioned via the method I mentioned before.
If you are wanting to flash a NAND Andriod ROM or Windows Phone 7 ROM then download the ROM of your coice and flash it using MAGLDR and the instructions of the ROM developer in thread for the ROM.
Now this is very important. I see from the picture you have a T-Mobile(TMOUS) HD2 so no matter what you do, do not flash a ROM with a radio version that reads like these 2.04.50.xx, 2.05.50.xx, or any radio that is x.xx.51.xx they will brick/kill a TMOUS HD2.
froibet said:
Hi there
I got an HD2 from a friend (he bought off ebay) and seems to just boot to the Tmobile sticking together logo and won't boot.
I don't think it charges as well...
there was no lines (radio?) at the bottom of the Sticking Together pink square screen...
is this phone bricked? or can I still flash a rom?
Click to expand...
Click to collapse
I would recommend flashing a stock T-Mobile ROM, since that appears to be the flavor of the phone. This will install the correct radio. Once the phone is working, continue as per normal for flashing the ROM. You will have to reinstall hardspl.
thanks for the info guys! i really appreciate the support!
it seems like it won't read the USB... is the port busted?
froibet said:
thanks for the info guys! i really appreciate the support!
it seems like it won't read the USB... is the port busted?
Click to expand...
Click to collapse
try this:
1) download your stock ROM.
2) put it on your SD card via a card reader, you want an .NBH file.
3) rename the file LEOIMG.NBH
4) make sure the phone is off, make sure your SD card is back in your phone.
5) hold down and power
6) it should go to a tri-color screen and say something about flashing the image, hit power to confirm
7) it should flash no problems.
MAKE SURE YOU DOWNLOAD THE CORRECT ROM FOR A TMOBILE US HD2
Have exactly the same problem with my friends phone.
Its a TMOUS and sticks on the same boot screen.
He screwed it up when trying to install Android NAND on it.
I can enter bootloader And I have managed to get rid of MAGLDR and CWM.
I have HSPL 3.03 installed on it, but when I try to install the latest ROM from TMOUS it fails at 8% and tells me that
'ERROR 290: INVALID COMMAND
This update Utility cannot be used for your PDA phone. Please check your update utility'
Tried copying the relevant file to the SD card and renaming it leoimg.nbh but the install fails HERE aswell with the error:
"RADIO_V2 - RSA Fail"
I managed to install an energyrom onto it, but it wouldnt go past the initial boot screen
Any help appreciated
Boradan said:
Have exactly the same problem with my friends phone.
Its a TMOUS and sticks on the same boot screen.
He screwed it up when trying to install Android NAND on it.
I can enter bootloader And I have managed to get rid of MAGLDR and CWM.
I have HSPL 3.03 installed on it, but when I try to install the latest ROM from TMOUS it fails at 8% and tells me that
'ERROR 290: INVALID COMMAND
This update Utility cannot be used for your PDA phone. Please check your update utility'
Tried copying the relevant file to the SD card and renaming it leoimg.nbh but the install fails HERE aswell with the error:
"RADIO_V2 - RSA Fail"
I managed to install an energyrom onto it, but it wouldnt go past the initial boot screen
Any help appreciated
Click to expand...
Click to collapse
Try running a Task 29 on your friends HD2. This willtotally clean out the NAND memory of the HD2 and reformat it, kinda sounds like that is what is needed to be done. He may have messed the NAND memory format up when he was trying to install the Andriod. You will have to reflash a Windows Mobile ROM after you run the Task 29 as it will not ha e a ROM on the phone then. You will not have to reflash HSPL cause it will not remove it.
It seems that the problem is RADIO related. I can task 29, and I can install The latest Energyrom, but I CANT install a radio.
There is no radio ON the phone at the minute it seems. When I try to do a radio install, it asks me if I want to go from version ' ' to the update I am using.
None of the installers see a radio on the phone, and trying to install the radio always fails at 96%. This would seem to be the same if I try to install the official TMOUS latest ROM with radio from SD Card. It fails at the radio install part.......
Maybe time for a new thread for this one.......
orangekid said:
try this:
1) download your stock ROM.
2) put it on your SD card via a card reader, you want an .NBH file.
3) rename the file LEOIMG.NBH
4) make sure the phone is off, make sure your SD card is back in your phone.
5) hold down and power
6) it should go to a tri-color screen and say something about flashing the image, hit power to confirm
7) it should flash no problems.
MAKE SURE YOU DOWNLOAD THE CORRECT ROM FOR A TMOBILE US HD2
Click to expand...
Click to collapse
i can do all this without connecting to the PC? just flashes from the SD card???
froibet said:
i can do all this without connecting to the PC? just flashes from the SD card???
Click to expand...
Click to collapse
Yes you can flash radio and ROM from your SD card. Here is a link to the thread on doing this gives step by step, check it out.
Hi all,
I would like to ask someone who are willing to lend me a hand.
Here comes the problem:
1. I wanna flash a NAND Android into my HD2 (not Tmous)
2. I have already flashed with HSPL2 with selection of 2.08 HSPL.
3. It went through to Windows Mobile again, nothing goes wrong untill when I am trying to flash with Magldr Bootloader with ROM Update Utility.
4. It went through again, after that the phone reboot itself and it should be displaying Magldr bootloader instead of HTC green logo stuck at the WHITE SCREEN.
5. I've tried several ways to solve it including soft-reset but still nothing happen with the same problem which is the green HTC logo stuck at the white screen.
6. Even Hard-reset with factory default reset I have tried, the process went through, but still the same problem again (YOU GUYS KNOW WHAT I MEANT).
7. So, I tried another LeoAdvanceRUU.exe which @HD2Owner had posted few months ago, the flashing process worked through but it stucked at the 0% with HTC logo at BLACK screen.
8. I kept on trying with another ROM or Radio Flashing again, again and again and it is still stucked at 0% !!! (GOSH !! I'm going to be crazy)
I really hope someone can help me out of this as I am very appreciate to those who are willing to help me. I need the phone to deal with my daily usage, please the 'PRO's out there.. ><
Thanks in advance.
P/S: The Tri-Color mode showed PB8100 - SS-BC
Did bootloader show 'SPL2.08HSPL' (or something along those lines)?
Nigeldg said:
Did bootloader show 'SPL2.08HSPL' (or something along those lines)?
Click to expand...
Click to collapse
Yes !! It does showed..coz its already HSPL-ed..but i stil duno what is happening..
you havent yet flashed a correct radio. Non tmous radios (..51.. radios) wont allow magldr to start
enter bootloader
flash 2.15.50 radio
magldr will now start
I dont drink either LOL
samsamuel said:
you havent yet flashed a correct radio. Non tmous radios (..51.. radios) wont allow magldr to start
enter bootloader
flash 2.15.50 radio
magldr will now start
Click to expand...
Click to collapse
erm, I also tried to Flash the Radio ROM, but it will stucked at HTC logo with Black Screen and also 0% wont move either..
In that case double check the spl version in bootloader. Quite often people flash "2.08.0000" by mistake instead of "2.08.hspl"
(You did instal hspl before trying the radio, right? Radios news hspl too)
samsamuel said:
In that case double check the spl version in bootloader. Quite often people flash "2.08.0000" by mistake instead of "2.08.hspl"
(You did instal hspl before trying the radio, right? Radios news hspl too)
Click to expand...
Click to collapse
yea i did install the HSPL before flashing the radio and it is done with 2.08 HSPL
but what do u mean by Radios news HSPL?
when I am flashing the radio in the bootloader, I used the common flashing technique which is using the CustomRUU with the RUU_Signed.nbh file which contains Radio 2.14.50 and then the only the problem came out.
by means every ROM that I am trying to flash, It will still stuck at 0% Black Screen with HTC logo..
oops, radios NEED hspl , lol, darned predictive txt!
ok, so sounds more like usb timeout,
enter bootloader, connect usb, count to 5, run customruu.
If that still wont work, you can flash radios from sd, just like roms. Put teh ruu_signed.nbh onto sd card, renamed leoimg.nbh, reboot into bootloader, phone will see the .nbh and flash it.
samsamuel said:
oops, radios NEED hspl , lol, darned predictive txt!
ok, so sounds more like usb timeout,
enter bootloader, connect usb, count to 5, run customruu.
If that still wont work, you can flash radios from sd, just like roms. Put teh ruu_signed.nbh onto sd card, renamed leoimg.nbh, reboot into bootloader, phone will see the .nbh and flash it.
Click to expand...
Click to collapse
erm, is the flashing will do it automatically itself ?? because I am still not able to boot into whatever OS yet. And do i need to connect the USB when the leoimg.nbh flashing if its working itself ??
no, no usb needed, put the leoimg on the sd card, card into phone, power on phone holding voldown, bootloader finds the leoimg on the card and starts the flashing process.
eXcMichael said:
erm, is the flashing will do it automatically itself ?? because I am still not able to boot into whatever OS yet. And do i need to connect the USB when the leoimg.nbh flashing if its working itself ??
Click to expand...
Click to collapse
OK THAT'S WORKING @samsamuel !!!!!
THANKS ALOT !!!
I also assume the Radio was not flashed but i just cannot find a way to do the flash, and my troubleshooting was correct.
THANKS ALOT especially @samsauel and other devs' assistance. Highly Appreciate for what you guys contributed.. really THANK YOU, ITS NOW RUNNING Hyperdroid GBX ~
Thread can be closed and for further reference.
Look for HD2 nand toolkit 4.1 on XDA developers
It's a all in one utility hand HD2.
You can also try the we site addictive tips.com , they step by step tutorials.