Database Users

Turn Off Flight Mode Message

Hello All,
I seem to be having a problem with the Flight Mode setting. My phone goes through stages of complaining about the flight mode repeatedly. It keeps asking me to turn off the flight mode when I try to use tomtom or enable bluetooth, but flight mode is not on. This is starting to get very tedious and I am not sure what is wrong. Has anyone else experienced this problem?
Cheers,
Matt

@,
i had the same problem using mponeschedule.
Installed microsoft.NET compact framework 1.0 sp3 for ppc and the symptoms disappeared.
Cheers

matmil said:
Hello All,
I seem to be having a problem with the Flight Mode setting. My phone goes through stages of complaining about the flight mode repeatedly. It keeps asking me to turn off the flight mode when I try to use tomtom or enable bluetooth, but flight mode is not on. This is starting to get very tedious and I am not sure what is wrong. Has anyone else experienced this problem?
Cheers,
Matt
Click to expand...
Click to collapse
It could be that you are experiencing a similar problem to me. You don't have a Qtek S100/S110 with similar firmware to me do you (please see my sig). If you do then there seems to be a problem with the interaction between bluetooth and flightmode in that ROM.
The way I fixed it was to use the very good (and free) PPCProfiles-Pro which can be found on the www.modaco.com site.
This is phone profile software. I've got 3 of the profiles set as follows:
1. Radio on / bluetooth on - when I'm in the car
2. Radio off / bluetooth on - when I'm hiking with my GPS
3. Radio off / bluetooth off.
As long as you don't turn the radio off by using the standard flight mode method you should stop getting the annoying messages.

i have the same problem i made HR Now everythin good
thormdac said:
@,
i had the same problem using mponeschedule.
Installed microsoft.NET compact framework 1.0 sp3 for ppc and the symptoms disappeared.
Cheers
Click to expand...
Click to collapse

It's not only that rom with these symptoms. I got TMO 1.13 & after installing profilers it appeared for the first time. I've got the latest .net as well & it doesn't help a bit. Maybe I need to reinstall it to fix some screw-ups. Apperently the radio can come in some sort of inconclusive state claiming flight-mode should be switched off, when it's not. I even managed to have BT on, while I was in flightmode.
M

I am having the same problem with i-mate JAM ROM:1.12.00 WWE and Radio V:1.12.10.
It happens when I change my profile to Bluetooth using PhoneAlarm V1.30.01. My workaround is to remove my bluetooth device and re-add it. This makes the message to disappear but after some days it comes back. It should be related to a sequence of keystrokes or something..

I had the "turn off flight mode" problem the other day. It took ages trying to stop it from happening, even after a soft reset!
In that particular case I think it was because I used a btcicle program to turn on bluetooth rather than doing it from PPCProfiles-Pro.
My advice to people is that if they use PPCProfiles-Pro to do this then don't use any other program to turn BT on or off and don't use the Microsoft flightmode either as the magician seems to get thoroughly confused. Set up your profiles so that you can do what you want just by switching profile in PPCProfiles-Pro.
Note. I tried PhoneAlarm a while back but that didn't work properly on my machine.

Hey
See if this solves it:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\FlightMode]
"IsFMCheckEnable"=dword:00000000
"WarningMsg"="Please turn Flight Mode off first"
Default Value is:
"IsFMCheckEnable"=dword:00000001
This works on the Blueangel, Himalaya, and Alpine. Sorry, I don't have a Magician to test.
Good Luck!!

moghisi101 said:
Hey
See if this solves it:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\FlightMode]
"IsFMCheckEnable"=dword:00000000
"WarningMsg"="Please turn Flight Mode off first"
Default Value is:
"IsFMCheckEnable"=dword:00000001
This works on the Blueangel, Himalaya, and Alpine. Sorry, I don't have a Magician to test.
Good Luck!!
Click to expand...
Click to collapse
Thanks moghisi101, I tried the fix. In my particular ROM (a Qtek) the IsFMCheckEnable doesn't exist so I added it in. Thought it was working but I got the old "Turn off flight mode" mesage yesterday. It's definately a problem with my ROM. It took me about 5 attempts to get bluetooth turned on.
So, in my earlier post when I said:
"As long as you don't turn the radio off by using the standard flight mode method you should stop getting the annoying messages."
it seems I was wrong. It doesn't matter how you try to turn on bluetooth, if you have this ROM on a Qtek, you are gonna get that message from time to time.
Thing is the rest of the pocketPC works great (for the most part) so I guess I'll just put up with it.

moghisi101 said:
Hey
See if this solves it:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\FlightMode]
"IsFMCheckEnable"=dword:00000000
"WarningMsg"="Please turn Flight Mode off first"
Default Value is:
"IsFMCheckEnable"=dword:00000001
This works on the Blueangel, Himalaya, and Alpine. Sorry, I don't have a Magician to test.
Good Luck!!
Click to expand...
Click to collapse
On my MDA Compact it works
thx

szymcio said:
moghisi101 said:
Hey
See if this solves it:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\FlightMode]
"IsFMCheckEnable"=dword:00000000
"WarningMsg"="Please turn Flight Mode off first"
Default Value is:
"IsFMCheckEnable"=dword:00000001
This works on the Blueangel, Himalaya, and Alpine. Sorry, I don't have a Magician to test.
Good Luck!!
Click to expand...
Click to collapse
On my MDA Compact it works
thx
Click to expand...
Click to collapse
In my case it doesn`t work!!!
I solved this problem in my oun way,
just rename Phone.lnk into TPhone.lnk ,path to anywhere.
& nothing control radio even without soft reset
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\FlightMode]
"PhoneLocalizedName"="Phone.lnk"

How can I fix my WiFi problem?

I have not been able to turn on wifi reliably for ages now - It all started when I upgraded to WM5. Now (even if I downgrade to wm2003se) I cannot turn it on. I press the wifi on button, the cursor comes up but nothing happens), leave it for a couple of hours, and then press again - it will sometimes turn on. It then stays on for about 30 mins, and turns off (I have the wifi set to never turn off).
I cannot diagnose the problem - can you?
Any help GREATLY appreciated - feel free to ask for more details.
hardint0110

What you can do is to check the following keys in the registry:
HKLM\Comm\Tnetwln1\Parms\HTCPreloadstatus --> 1
HKLM\Comm\Tnetwln1\Parms\HTCPreloadwifi -->1
Both dword with decimal values. Next, when you made the changes, softreset and check if your wlan is working.
Keep us posted.
Cheers.

TheWizzard2203 said:
What you can do is to check the following keys in the registry:
HKLM\Comm\Tnetwln1\Parms\HTCPreloadstatus --> 1
HKLM\Comm\Tnetwln1\Parms\HTCPreloadwifi -->1
Both dword with decimal values. Next, when you made the changes, softreset and check if your wlan is working.
Keep us posted.
Cheers.
Click to expand...
Click to collapse
Dont seem to have the directory Tnetwln1
I am using a Blue Angel with xplode wm5 AKU 3.5.2 rom kitchen 2

i do have a directory called tiacwln1, and another called tiacwln.
I have attached them here, so you can have a look yourself:
(rename .doc to .reg if you need to)

Thought I had some progress there, but now all is back to normal...

Still no luck... found this: http://www.teksoftco.com/forum/viewtopic.php?t=194
but it wont turn WiFi on and off.

WIFI does not run on Wizard
I have not been able to turn on wifi reliably for ages now
I press the wifi on button, the cursor comes up but nothing happens), it will sometimes turn on. It then stays on for about 1 - 5 seconds, and shows connecting BUT DOES NOT CONNECT and turns off (I have the wifi set to never turn off).
I cannot diagnose the problem - can you?
Any help GREATLY appreciated - feel free to ask for more details.
Copied a part of the Message from the ORIGINAL THREAD
Thanx In advance
-jeasbe'

Thank you
The registry jack worked 4 me i don't know how to thank you really you helpde me a lot

No Luck..Need to USE THIS URGENT
I tried it but on Reboot My settings return back from
HKLM\Comm\Tnetwln1\Parms\HTCPreloadstatus --> 1
RETURNS BACK to
HKLM\Comm\Tnetwln1\Parms\HTCPreloadstatus --> 0
___________________________________________
The other setting
HKLM\Comm\Tnetwln1\Parms\HTCPreloadwifi -->1
Stays same

And after that, have you tried to soft-reset the device ?
There's a good change if don't, the change won't have any effect just like on you're desktop/laptop etc.

No Luck
Stevos said:
And after that, have you tried to soft-reset the device ?
There's a good change if don't, the change won't have any effect just like on you're desktop/laptop etc.
Click to expand...
Click to collapse
Of course, That's what I said that "I tried it but on Reboot My settings return back "
After the Reboot/ ie after the Soft reset.
No Luck

I have the same problem.
the value change back to 0 after soft-reset.
I tried several times even waiting for some minutes before soft-resetting.

So it means ??
NO LUCK ??
~smile~

@jeasbe: I just wanted to second your finding...
Actually I suspect some hardware/EEPROM issue like this (Hermes):
http://forum.xda-developers.com/showthread.php?t=304004
this is my story:
1. Got the Dopod from the provider with Chinese ROM (living in mainland China at the moment). Did not test WiFi.
2. After strongly insisting on an English GUI I got an update to an English ROM from the provider. Since then no WiFi
3. Asked the provider about WiFi on my Dopod. He confirmed that it was not working but had been working with the Chinese ROM before.
.... (so excluded user problem but still no solution)
4. Decided to upgrade by myself assuming the problem lies in the ROM version.
.... Upgraded step-by-step with the various ROM versions to XM6 according to tutorial 'n checked for each ROM version for WiFi. Still no WiFi.
5. Installed the WiFi patch for the commgr. No WiFi.
6. Read about that registry hack. Values do not remain after soft-reset. No WiFi.
7. Colleagues have the same problem (but still with the English ROM from the provider). So will ask one of them to hand-in to the provider to change back to Chinese ROM in order to see whether WiFi is working with that setting. But doubting it
8. any other ideas appreciated ...

another thread with similar issue:
http://forum.xda-developers.com/showthread.php?t=296936

It looks like the Hermes guys (Drummer) found a solution:
http://forum.xda-developers.com/showthread.php?t=322225
However, I am not an expert so don't whether it is possible the adapt the approach somehow to the Wizard.

any news here? ive got exactly the same problem

bug-i said:
any news here? ive got exactly the same problem
Click to expand...
Click to collapse
I found out that if you have a CHS version officially sold in China there is no WiFi feature in the phone - this rule applies for all models from any manufacturer.
I am not sure though whether it is really hardware (like missing the WLAN chip) or software issue (on a level below the ROM, because change to different ROM [incl. change of IPL/SPL and radio] won't help).

WM6 Wifi power save mode? [SOLVED]

Hello,
im new on this forum and like it.
I search for set the power save mode in wifi adapter on my LG KS20. When the screen light off (after 2 minutes) my wifi connection is lost.
Any Expert know how to do this?

Found this in the kaisertweak topic.
http://forum.xda-developers.com/showpost.php?p=1677643&postcount=367
But I think the GUID is different on each type of device.

Ok thanks my problem is solved!!!

I'm sure this way can keep wi-fi alive. But Voip (SIP) program still not work well.
I hope the SIP still a alive,like GSM, that I can receive/dial Extention number.
anybody can solve it? thank a lot !!
Krypt said:
Found this in the kaisertweak topic.
http://forum.xda-developers.com/showpost.php?p=1677643&postcount=367
But I think the GUID is different on each type of device.
Click to expand...
Click to collapse

Dead WiFi on my Touch HD. Possible reason: corrupted WiFi EEPROM.

MY problem is. The wifi won’t turn on, and when u go to wifi icon in the connection the turn on wifi won’t be ticked. I have tried a lot off rom and even back to the original Orange rom and spl, all the same didn’t change anything.
I’ve been advised that my WiFi EEPROM has been corrupted or blanked somehow, that's the usual cause.
I need to get hold of an EEPROM from another device and write it onto mine.
This problem has already been known and solution has been found for Hermes model (below is the link to that thread) :
http://forum.xda-developers.com/showthread.php?t=322225
Can anybody help me in my problem? I need tools (something similar used for Hermes model) and working Touch HD.
P.S. As I can see, by reading this forum, this is not only my problem.

I got the same problem as u, The wifi wont on and ticked.
But some times it will. I also doubt this is an hardware problem.
Because some time it will turn on and some times it wont.
any help here?

Now, I found My problem.
When ever I instaled any program. the wifi will stoped working.
is that software issue?
or hard ware issue?
But when I didnt instal any third application the wifi work perfectly, I have changed to several rom including 6.5 coocked.

i'm sorry to tell u this guys, because i used to have the same problem and even worse the camera used to show only blank screen and i my pc couldn't detect my HD via USB, so i searched for solutions but i couldn't find any. I guess the only solution for this problem is by replacing the main board by HTC so if ur mobile is still under warranty go and replace it as i did. I'm also afraid to face this problem again cuz i found that many people are having this problem. plz let me know if manneged to get it works without replacing the main board.

I am trying to attract our gurus' and moderators’ attention, because I believe that we can solve this problem without replacing mainboard. I also believe that HTC corp is making profit by receiving our some kind of broken mainboards, reflash them with the stock EEPROm and sell it as a new again.
Our gurus are spending their times to create bulk of custom ROMs, where at the same time solving such problem with WiFi, looks more interesting and challenging.
Also I understand that if we had real hardware problem, no Wi-Fi, no Bluetooth, nothing would work. But everything is OK, apart from Wi-Fi.
If we have done this for Hermes model, why not to do something for HD as well.

Intermittent wifi
I now also have this problem, having just received a replacement from Orange for my original HD, which I dropped resulting in a badly cracked screen. This first unit had no problem with wifi, and I used it regularly on my home network. I loaded up the new one with all the same software, and, lo and behold, the wifi has become intermittent. Sometimes it works fine, at others when I attempt to switch it on the wifi symbol appears at the top of the screen momentarily and then disappears again, and there are also periods when it won't switch on at all. I have been trying to detect some pattern to this, or if there is something specific that triggers it, but so far without success. I am close to asking Orange for another replacement, and the comments above re corrupted wifi eeprom reinforce this. I also would be interested to hear from the gurus about this issue.

Loads of people report the problem, here and on other sites, but HTC has never explained what was wrong with the returned units (simply swopping MoBos and sending them back) and neither has anyone shown what combination of things "triggers" it - if indeed there is a trigger. It may just be a QC issue.
There was an anecdotal suggestion that the BT/WiFi antennas are too close to the board, so despite the EM shielding running the two together could cause damage, but nobody's been able to replicate it (and I doubt they ever will, as it requires someone to intentionally fry a working handset - not a cheap way to prove a point!).

I've had this problem now for a while and even sent my phone back to HTC for repair. It came back to me about 3 weeks ago and they said they fixed it. I never tested it when I got it back (stupid, I know!) and recently found it not working again. Today I hard reset the phone and found it worked but then didn't after installing Copilot SatNav. Bugger!
Does anyone have a solution to this that doesn't involve sending the phone back because when HTC reboot the phone they'll find that it works (surprisingly as no software will ghave been loaded!)
Any ideas?

+1 No WIFI + Camera + Strange USB connection (IT IS SOFTWARE)
+1 No Wifi, No Camera and stupid USB
The USB works I can flash from computer so it must work.
The USB dosnt ussually work unless flashing.
The Wifi just wont go/stay on at all
6.5 Roms there is no Camera Icon
6.1 Roms when the Camera Icon is hit, nothing happins
This has to be fixable by software, I know I can get the USB working and it is ONLY software as I can Flash it through USB, and in Bootloader it shows up USB when connected. Note:- Also my battery wont charge from USB, testing to see if its battery problem soon, but semi sure it is Software problem, as it will charge a little bit when left in Bootloader mode all day.
PLEASE PLEASE PLEASE HELP, I brought my phone from China (actually came from Belgium) and I am from Australia, don't wanna send my phone a million miles away to Europe.
Edit: USB seems to be charging under Energy Rom and (I don't know if this helps) 1.17.25.09 Radio.

Seems to me that we can try the EEPROM fix if we find out the WLAN EEPROM address for the Touch HD.
Any experts here to shine a light on this?
Edit: Have been doing some more testing and when I try the emapiTest command in MTTY USB mode (with HardSPL 1.56) here is the output I get:
emapi init 1251 Test
1. Power on WiFi
2. Init WLAN SDIO interface
SD clk rate 19MHz
SD clk rate 144KHZ
SD Clk rate 24 MHz
6. DeviceID Test
eMapi1251 Read ChipID : 0x4B00
WLAN 1251 detect fail...
7. Write/read Test, block size = 512
[eMapiSdInterfaceTest] mismatch at 1!!!
eMapiSdInterfaceTest NG!
8. Interrupt Test
eMapiTestInterrupt WIFI_IRQ = 0
eMapiTestInterrupt FAILED!! intr active state = 0, non-active state = 0
Can anyone who knows what they are talking about shed some light on this?

To be sure it is not Software related.
Can people post their Rom
And the registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN]
"DeviceName"="{98C5250D-C29A-4985-AE5F-AFE5367E5006}\\TNETW12511"
(note this is the Registry key for the Diamond Wifi to work directly, Blackstone Wifi could have another GUID)
Also try to locate the wrlsmgr.exe in windows folder and try to start Wifi with that default Windows CommManager.
I've seen other devices where the address in the WLAN key was wrong, and it would show the behaviour one user posted here, you see Wifi pop up a second or two but disappear again)

Noonski said:
To be sure it is not Software related.
Can people post their Rom
And the registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN]
"DeviceName"="{98C5250D-C29A-4985-AE5F-AFE5367E5006}\\TNETW12511"
(note this is the Registry key for the Diamond Wifi to work directly, Blackstone Wifi could have another GUID)
Also try to locate the wrlsmgr.exe in windows folder and try to start Wifi with that default Windows CommManager.
I've seen other devices where the address in the WLAN key was wrong, and it would show the behaviour one user posted here, you see Wifi pop up a second or two but disappear again)
Click to expand...
Click to collapse
First of all, thanks Noonski to stop by to check out this thread
My rom is the official 1.56.405.1 WWE Wm6.1 ROM
Even wrlsmgr cant switch my wifi on.
My wifi worked initially then started niggling, the whole switch on, switch off thing, and now it doesnt switch on at all...
Oh and my reg key at the location is the same
{98C5250D-C29A-4985-AE5F-AFE5367E5006}\TNETW12511
I have tried quite a few roms now including doing MTTY task 29 to format phone and load new roms from sd card followed by 2 hard resets...

Ai, wouldn't know where to go for MTTY and hardware issues.
I do remember the Dying radio on the original XDA issue, so it's not improbable.
I'll make this temp Sticky to see if it get's some attention by others.

My WIFI is dead also....but thank god I got dataplan....but I still wished someone can solve it.

Noonski said:
To be sure it is not Software related.
Can people post their Rom
And the registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN]
"DeviceName"="{98C5250D-C29A-4985-AE5F-AFE5367E5006}\\TNETW12511"
(note this is the Registry key for the Diamond Wifi to work directly, Blackstone Wifi could have another GUID)
Click to expand...
Click to collapse
Just to confirm that Blackstone Wifi has the same GUID as shown here above. My Wifi is still working, official stock ROM 1.56.401 WWE, radio version 1.13, no ROM or radio flashes performed so far (other than official ROM upgrade) ...

Noonski said:
To be sure it is not Software related.
Can people post their Rom
And the registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN]
"DeviceName"="{98C5250D-C29A-4985-AE5F-AFE5367E5006}\\TNETW12511"
(note this is the Registry key for the Diamond Wifi to work directly, Blackstone Wifi could have another GUID)
Also try to locate the wrlsmgr.exe in windows folder and try to start Wifi with that default Windows CommManager.
I've seen other devices where the address in the WLAN key was wrong, and it would show the behaviour one user posted here, you see Wifi pop up a second or two but disappear again)
Click to expand...
Click to collapse
Thank you for stopping by. Without you guys, we will not be able to attract our gurus attention to this problem. By the way, Blackstone Wifi has the same GUID as shown above. My ROM is one of the EnergyRom 3.0 , radio version 1.14.25.24.
Just let me know what to do and I will start testing. Also I have working Blackstone around from which we can extract working EEPROm. Just give me tools and instructions.

I remember that I issued this command on my phone and has exact output you've posted. I also rememer that I've done that on the working one and it has different output stating that wlan is OK and there was not any 7. Write/read Test, block size = 512

tabi13 said:
Seems to me that we can try the EEPROM fix if we find out the WLAN EEPROM address for the Touch HD.
Any experts here to shine a light on this?
Edit: Have been doing some more testing and when I try the emapiTest command in MTTY USB mode (with HardSPL 1.56) here is the output I get:
emapi init 1251 Test
1. Power on WiFi
2. Init WLAN SDIO interface
SD clk rate 19MHz
SD clk rate 144KHZ
SD Clk rate 24 MHz
6. DeviceID Test
eMapi1251 Read ChipID : 0x4B00
WLAN 1251 detect fail...
7. Write/read Test, block size = 512
[eMapiSdInterfaceTest] mismatch at 1!!!
eMapiSdInterfaceTest NG!
8. Interrupt Test
eMapiTestInterrupt WIFI_IRQ = 0
eMapiTestInterrupt FAILED!! intr active state = 0, non-active state = 0
Can anyone who knows what they are talking about shed some light on this?
Click to expand...
Click to collapse
I remember issuing this command on my phone and has exact output you've posted. I also rememer that I've done that on the working one and it has different output stating that wlan is OK and there was not any 7. Write/read Test, block size = 512

Noonski said:
To be sure it is not Software related.
Can people post their Rom
And the registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN]
"DeviceName"="{98C5250D-C29A-4985-AE5F-AFE5367E5006}\\TNETW12511"
(note this is the Registry key for the Diamond Wifi to work directly, Blackstone Wifi could have another GUID)
Also try to locate the wrlsmgr.exe in windows folder and try to start Wifi with that default Windows CommManager.
I've seen other devices where the address in the WLAN key was wrong, and it would show the behaviour one user posted here, you see Wifi pop up a second or two but disappear again)
Click to expand...
Click to collapse
I find it very interesting that the Trinity has the EXACT same registry entry. Also, the exact same WLAN Radio. So, is there a different WLAN Radio that is having the same issue (I don't remember the Hermes one), or is it solely the TNETW12511 that has the issue? Would be nice to help narrow it down a bit.
Could it be that by using these dumped ROMs that we are inadvertantly flashing code for a different WLAN Radio that is corrupting our eeproms? Maybe there is a small part of code hidden within the DUMPS that still remains? Just some thoughts... This problem seems to be happening more and more since WM6.5?
But I also realize it may be happening more and more because more people are flashing now than ever!

I have same situation with WiFi on my HD.
I would like to say something, which could be useful for gurus.
Sometimes my phone catching WiFi after a few soft resets. 3-4 times and I could connect to WiFi network.

Solution of keep wifi on when standby

ROM Based on T|6.5|ROM|WWE| ★ EnergyROM "Leo" (23016) Oct 11 ★ Latest Manila 2.5 / Twitter Tab! ★ http://forum.xda-developers.com/showthread.php?p=4720931#post4720931
Step1: Turn off WiFi, then set value "never" in Settings-Connections-Wi-Fi-Wireless Networks-Menu-Advanced-Turn off Wi-Fi if not connected in.
Step2: Set
HKEY_LOCAL_MACHINE\Comm\TNETW12511\Parms
Change value of HTCKeepWifiOnWhenUnattended to 1
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Suspend\{98C5250D-C29A-4985-AE5F-AFE5367E5006}
Change value of (Default) to 1
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Resuming\{98C5250D-C29A-4985-AE5F-AFE5367E5006}
Change value of (Default) to 1
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Unattended\{98C5250D-C29A-4985-AE5F-AFE5367E5006}
Change value of (Default) to 1
Step3: reboot and enjoy WIFI when standby!
I test it with my T5353 for many certain long enough standbys, it works correctly.
Note1: Do everything when WIFI off.
Note2: if no data transfer, WIFI still automatically disconnected for saving power during standby. So if you want WIFI always on:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Suspend\{98C5250D-C29A-4985-AE5F-AFE5367E5006}
Change value of (Default) to 0
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Resuming\{98C5250D-C29A-4985-AE5F-AFE5367E5006}
Change value of (Default) to 0
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Unattended\{98C5250D-C29A-4985-AE5F-AFE5367E5006}
Change value of (Default) to 0

as I remember, in Advanced Config there is an option - after how much time to disconnect.

Do you know what it is about that ROM that allows this fix to work? I'm just wondering if this fix is specific to something in that ROM or if it's more generic (eg Windows 6.5.)
I've just tried it on the stock ROM and it doesn't appear to work (I'm trying to get scheduled e-mail syncs to work over wifi during standby.)
How is battery life with this fix?
Note2: if no data transfer, WIFI still automatically disconnected for saving power during standby.
Click to expand...
Click to collapse
Am I right in thinking that it willl still then reconnect if data is needed again (ie. every time e-mail is scheduled to sync.)

In Spanish Vodafone ROM (1.40.164.3 ESN), there is no such option as "Keep Wifi on"

mjcuk said:
Do you know what it is about that ROM that allows this fix to work? I'm just wondering if this fix is specific to something in that ROM or if it's more generic (eg Windows 6.5.)
I've just tried it on the stock ROM and it doesn't appear to work (I'm trying to get scheduled e-mail syncs to work over wifi during standby.)
How is battery life with this fix?
Am I right in thinking that it willl still then reconnect if data is needed again (ie. every time e-mail is scheduled to sync.)
Click to expand...
Click to collapse
As my test, "keep connection" means you open a software that need internet connection at any time, like MSN or Skype. I test data sync, data sync WON'T work (WON'T work means it can't sync data when standby, not means it can't make wifi on durning standby) durning standby if I only make such changes, even I open my Skype and I'm sure I had kept it online.
I find EnergyROM is different with other ROM, compatibility is much better as my opinion. So may be my solution only work on EnergyROM, but you can try other ROMs.
PS: WIFI won't make the phone obviously hot as I test for a whole night.
Good luck.

In an Spanish Official HTC Rom (1.39.412.2 (49068) ESN) it works like a charm!
Thanks, household
Regards.
Nostramo

Nostramo said:
In an Spanish Official HTC Rom (1.39.412.2 (49068) ESN) it works like a charm!
Thanks, household
Regards.
Nostramo
Click to expand...
Click to collapse
You are welcome.
May the Force be with you!
Regards,
Household

Tried fix on WM6.5 Rhodium
Hi household,
Tried this fix with Stock 6.5 ROM on Rhodium. Unfortunately didnt work.
(HKEY_LOCAL_MACHINE\Comm\TNETW12511\Parms\HTCKeepWifiOnWhenUnattended replaced with
HKEY_LOCAL_MACHINE\Comm\BCMSDDHD1\Parms\HTCKeepWifiOnWhenUnattended for Rhodium)
Apologies in advance for brining in a different device to the thread - but is there something that I'm missing?
For 6.1 all that I needed to do was step 1 in your post with the replacement above. But now after every reboot HKEY_LOCAL_MACHINE\Comm\BCMSDDHD1\Parms\HTCKeepWifiOnWhenUnattended gets set back to 0!!!
Waaa I need help - I really miss having my WiFi always on!
Thanks!
haongusa.

haongusa said:
Hi household,
Tried this fix with Stock 6.5 ROM on Rhodium. Unfortunately didnt work.
(HKEY_LOCAL_MACHINE\Comm\TNETW12511\Parms\HTCKeepWifiOnWhenUnattended replaced with
HKEY_LOCAL_MACHINE\Comm\BCMSDDHD1\Parms\HTCKeepWifiOnWhenUnattended for Rhodium)
Apologies in advance for brining in a different device to the thread - but is there something that I'm missing?
For 6.1 all that I needed to do was step 1 in your post with the replacement above. But now after every reboot HKEY_LOCAL_MACHINE\Comm\BCMSDDHD1\Parms\HTCKeepWifiOnWhenUnattended gets set back to 0!!!
Waaa I need help - I really miss having my WiFi always on!
Thanks!
haongusa.
Click to expand...
Click to collapse
I'm sorry I don't have Touch Pro 2, so I can't know what should be set up on this device.

wifi not working on standby
haongusa said:
Hi household,
Tried this fix with Stock 6.5 ROM on Rhodium. Unfortunately didnt work.
(HKEY_LOCAL_MACHINE\Comm\TNETW12511\Parms\HTCKeepWifiOnWhenUnattended replaced with
HKEY_LOCAL_MACHINE\Comm\BCMSDDHD1\Parms\HTCKeepWifiOnWhenUnattended for Rhodium)
Apologies in advance for brining in a different device to the thread - but is there something that I'm missing?
For 6.1 all that I needed to do was step 1 in your post with the replacement above. But now after every reboot HKEY_LOCAL_MACHINE\Comm\BCMSDDHD1\Parms\HTCKeepWifiOnWhenUnattended gets set back to 0!!!
Waaa I need help - I really miss having my WiFi always on!
Thanks!
haongusa.
Click to expand...
Click to collapse
Having the same problem on a topaz with build 28004! Any Help?