Hello All,
I seem to be having a problem with the Flight Mode setting. My phone goes through stages of complaining about the flight mode repeatedly. It keeps asking me to turn off the flight mode when I try to use tomtom or enable bluetooth, but flight mode is not on. This is starting to get very tedious and I am not sure what is wrong. Has anyone else experienced this problem?
Cheers,
Matt
@,
i had the same problem using mponeschedule.
Installed microsoft.NET compact framework 1.0 sp3 for ppc and the symptoms disappeared.
Cheers
matmil said:
Hello All,
I seem to be having a problem with the Flight Mode setting. My phone goes through stages of complaining about the flight mode repeatedly. It keeps asking me to turn off the flight mode when I try to use tomtom or enable bluetooth, but flight mode is not on. This is starting to get very tedious and I am not sure what is wrong. Has anyone else experienced this problem?
Cheers,
Matt
Click to expand...
Click to collapse
It could be that you are experiencing a similar problem to me. You don't have a Qtek S100/S110 with similar firmware to me do you (please see my sig). If you do then there seems to be a problem with the interaction between bluetooth and flightmode in that ROM.
The way I fixed it was to use the very good (and free) PPCProfiles-Pro which can be found on the www.modaco.com site.
This is phone profile software. I've got 3 of the profiles set as follows:
1. Radio on / bluetooth on - when I'm in the car
2. Radio off / bluetooth on - when I'm hiking with my GPS
3. Radio off / bluetooth off.
As long as you don't turn the radio off by using the standard flight mode method you should stop getting the annoying messages.
i have the same problem i made HR Now everythin good
thormdac said:
@,
i had the same problem using mponeschedule.
Installed microsoft.NET compact framework 1.0 sp3 for ppc and the symptoms disappeared.
Cheers
Click to expand...
Click to collapse
It's not only that rom with these symptoms. I got TMO 1.13 & after installing profilers it appeared for the first time. I've got the latest .net as well & it doesn't help a bit. Maybe I need to reinstall it to fix some screw-ups. Apperently the radio can come in some sort of inconclusive state claiming flight-mode should be switched off, when it's not. I even managed to have BT on, while I was in flightmode.
M
I am having the same problem with i-mate JAM ROM:1.12.00 WWE and Radio V:1.12.10.
It happens when I change my profile to Bluetooth using PhoneAlarm V1.30.01. My workaround is to remove my bluetooth device and re-add it. This makes the message to disappear but after some days it comes back. It should be related to a sequence of keystrokes or something..
I had the "turn off flight mode" problem the other day. It took ages trying to stop it from happening, even after a soft reset!
In that particular case I think it was because I used a btcicle program to turn on bluetooth rather than doing it from PPCProfiles-Pro.
My advice to people is that if they use PPCProfiles-Pro to do this then don't use any other program to turn BT on or off and don't use the Microsoft flightmode either as the magician seems to get thoroughly confused. Set up your profiles so that you can do what you want just by switching profile in PPCProfiles-Pro.
Note. I tried PhoneAlarm a while back but that didn't work properly on my machine.
Hey
See if this solves it:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\FlightMode]
"IsFMCheckEnable"=dword:00000000
"WarningMsg"="Please turn Flight Mode off first"
Default Value is:
"IsFMCheckEnable"=dword:00000001
This works on the Blueangel, Himalaya, and Alpine. Sorry, I don't have a Magician to test.
Good Luck!!
moghisi101 said:
Hey
See if this solves it:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\FlightMode]
"IsFMCheckEnable"=dword:00000000
"WarningMsg"="Please turn Flight Mode off first"
Default Value is:
"IsFMCheckEnable"=dword:00000001
This works on the Blueangel, Himalaya, and Alpine. Sorry, I don't have a Magician to test.
Good Luck!!
Click to expand...
Click to collapse
Thanks moghisi101, I tried the fix. In my particular ROM (a Qtek) the IsFMCheckEnable doesn't exist so I added it in. Thought it was working but I got the old "Turn off flight mode" mesage yesterday. It's definately a problem with my ROM. It took me about 5 attempts to get bluetooth turned on.
So, in my earlier post when I said:
"As long as you don't turn the radio off by using the standard flight mode method you should stop getting the annoying messages."
it seems I was wrong. It doesn't matter how you try to turn on bluetooth, if you have this ROM on a Qtek, you are gonna get that message from time to time.
Thing is the rest of the pocketPC works great (for the most part) so I guess I'll just put up with it.
moghisi101 said:
Hey
See if this solves it:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\FlightMode]
"IsFMCheckEnable"=dword:00000000
"WarningMsg"="Please turn Flight Mode off first"
Default Value is:
"IsFMCheckEnable"=dword:00000001
This works on the Blueangel, Himalaya, and Alpine. Sorry, I don't have a Magician to test.
Good Luck!!
Click to expand...
Click to collapse
On my MDA Compact it works
thx
szymcio said:
moghisi101 said:
Hey
See if this solves it:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\FlightMode]
"IsFMCheckEnable"=dword:00000000
"WarningMsg"="Please turn Flight Mode off first"
Default Value is:
"IsFMCheckEnable"=dword:00000001
This works on the Blueangel, Himalaya, and Alpine. Sorry, I don't have a Magician to test.
Good Luck!!
Click to expand...
Click to collapse
On my MDA Compact it works
thx
Click to expand...
Click to collapse
In my case it doesn`t work!!!
I solved this problem in my oun way,
just rename Phone.lnk into TPhone.lnk ,path to anywhere.
& nothing control radio even without soft reset
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\FlightMode]
"PhoneLocalizedName"="Phone.lnk"
Related
can you help me find any XDAII automatic turn off software for wireless part of machine in defined time ?
thanks Tomino CZECH
ps: Happy new year 8)
Not sure if it works on XDA2
www.phonesnooze.com This little app lets you set on and off times for the radio for each day of the week. I do know that it worked on PPC2002, but ran into problems on WM2003. Not sure if it was ever tested on the XDA2. The author is rewriting it for WM2003. It saved a LOT of battery life as I never had to remember to turn off the phone (or forget to turn it back on).
david
anyone?
coz..bluetooth..only..can..work...when..flight..mode..if..off
Regards
DJ
not the case on mine :? have you tried resetting?
resetting..what?
ive..done..hard...resets..and..soft..resets..
nothing..works
DJ
What happened to your [.]-key? If it's stuck you should replace your keyboard.
i..know..that's..just..annoying
my..spacebar..is..broken..
new..one..coming...tomorrow
so..can..someone.help..me?
DJ
The whole point of flight mode is that it turns off all wireless activity. GSM, BT, and WiFi.
DjSwift said:
so..can..someone.help..me?DJ
Click to expand...
Click to collapse
what device do you have? I have XDAII and when I turn the flight mode ON (=all radios are off), I can then click the Bluetooth icon on Today screen and turn the Bluetooth on. It seems to work fine even the phone radio is disabled.
And I agree with AlanJC^^^^^, just keep it off when flying.
its..an..xda2i
it..wont..let..you..turn..on..Bluetooth..in..any..way
DJ
AlanJC said:
The whole point of flight mode is that it turns off all wireless activity. GSM, BT, and WiFi.
Click to expand...
Click to collapse
You know sounds that come out of a radio when you put a phone next to it??
Well my xda2i makes the sound when running tomtom and it then freezes and needs a reset.
It does it every 5 minutes!! and i cannot use my XDA2i in the car!!
Any solution to this?
i..thought..disabling..the..flight..mode..so..that..the..GSM..signal..cannot..be..transmitted..might..help...my..situation
I..got..rikaline..X7..xda2i..tomtom3
Thx
I believe there is a problem with that setup whereby the system freezes when the radio is changing gsm masts while mobile, flight mode should cure it, pain in the ass though having to switch off the phone when navigating.
http://forum.xda-developers.com/viewtopic.php?t=24268
It has to be down to each individual phone and equipment as mine works like a dream :roll: No reason why changing GSM masts should affect tomtom at all.
I always try to make sure all running programs are ended first as they could be still there in the background.
I have not been able to turn on wifi reliably for ages now - It all started when I upgraded to WM5. Now (even if I downgrade to wm2003se) I cannot turn it on. I press the wifi on button, the cursor comes up but nothing happens), leave it for a couple of hours, and then press again - it will sometimes turn on. It then stays on for about 30 mins, and turns off (I have the wifi set to never turn off).
I cannot diagnose the problem - can you?
Any help GREATLY appreciated - feel free to ask for more details.
hardint0110
What you can do is to check the following keys in the registry:
HKLM\Comm\Tnetwln1\Parms\HTCPreloadstatus --> 1
HKLM\Comm\Tnetwln1\Parms\HTCPreloadwifi -->1
Both dword with decimal values. Next, when you made the changes, softreset and check if your wlan is working.
Keep us posted.
Cheers.
TheWizzard2203 said:
What you can do is to check the following keys in the registry:
HKLM\Comm\Tnetwln1\Parms\HTCPreloadstatus --> 1
HKLM\Comm\Tnetwln1\Parms\HTCPreloadwifi -->1
Both dword with decimal values. Next, when you made the changes, softreset and check if your wlan is working.
Keep us posted.
Cheers.
Click to expand...
Click to collapse
Dont seem to have the directory Tnetwln1
I am using a Blue Angel with xplode wm5 AKU 3.5.2 rom kitchen 2
i do have a directory called tiacwln1, and another called tiacwln.
I have attached them here, so you can have a look yourself:
(rename .doc to .reg if you need to)
Thought I had some progress there, but now all is back to normal...
Still no luck... found this: http://www.teksoftco.com/forum/viewtopic.php?t=194
but it wont turn WiFi on and off.
WIFI does not run on Wizard
I have not been able to turn on wifi reliably for ages now
I press the wifi on button, the cursor comes up but nothing happens), it will sometimes turn on. It then stays on for about 1 - 5 seconds, and shows connecting BUT DOES NOT CONNECT and turns off (I have the wifi set to never turn off).
I cannot diagnose the problem - can you?
Any help GREATLY appreciated - feel free to ask for more details.
Copied a part of the Message from the ORIGINAL THREAD
Thanx In advance
-jeasbe'
Thank you
The registry jack worked 4 me i don't know how to thank you really you helpde me a lot
No Luck..Need to USE THIS URGENT
I tried it but on Reboot My settings return back from
HKLM\Comm\Tnetwln1\Parms\HTCPreloadstatus --> 1
RETURNS BACK to
HKLM\Comm\Tnetwln1\Parms\HTCPreloadstatus --> 0
___________________________________________
The other setting
HKLM\Comm\Tnetwln1\Parms\HTCPreloadwifi -->1
Stays same
And after that, have you tried to soft-reset the device ?
There's a good change if don't, the change won't have any effect just like on you're desktop/laptop etc.
No Luck
Stevos said:
And after that, have you tried to soft-reset the device ?
There's a good change if don't, the change won't have any effect just like on you're desktop/laptop etc.
Click to expand...
Click to collapse
Of course, That's what I said that "I tried it but on Reboot My settings return back "
After the Reboot/ ie after the Soft reset.
No Luck
I have the same problem.
the value change back to 0 after soft-reset.
I tried several times even waiting for some minutes before soft-resetting.
So it means ??
NO LUCK ??
~smile~
@jeasbe: I just wanted to second your finding...
Actually I suspect some hardware/EEPROM issue like this (Hermes):
http://forum.xda-developers.com/showthread.php?t=304004
this is my story:
1. Got the Dopod from the provider with Chinese ROM (living in mainland China at the moment). Did not test WiFi.
2. After strongly insisting on an English GUI I got an update to an English ROM from the provider. Since then no WiFi
3. Asked the provider about WiFi on my Dopod. He confirmed that it was not working but had been working with the Chinese ROM before.
.... (so excluded user problem but still no solution)
4. Decided to upgrade by myself assuming the problem lies in the ROM version.
.... Upgraded step-by-step with the various ROM versions to XM6 according to tutorial 'n checked for each ROM version for WiFi. Still no WiFi.
5. Installed the WiFi patch for the commgr. No WiFi.
6. Read about that registry hack. Values do not remain after soft-reset. No WiFi.
7. Colleagues have the same problem (but still with the English ROM from the provider). So will ask one of them to hand-in to the provider to change back to Chinese ROM in order to see whether WiFi is working with that setting. But doubting it
8. any other ideas appreciated ...
another thread with similar issue:
http://forum.xda-developers.com/showthread.php?t=296936
It looks like the Hermes guys (Drummer) found a solution:
http://forum.xda-developers.com/showthread.php?t=322225
However, I am not an expert so don't whether it is possible the adapt the approach somehow to the Wizard.
any news here? ive got exactly the same problem
bug-i said:
any news here? ive got exactly the same problem
Click to expand...
Click to collapse
I found out that if you have a CHS version officially sold in China there is no WiFi feature in the phone - this rule applies for all models from any manufacturer.
I am not sure though whether it is really hardware (like missing the WLAN chip) or software issue (on a level below the ROM, because change to different ROM [incl. change of IPL/SPL and radio] won't help).
Hi every body,
My Prophet is warming up itself, battery is being consumed very quickly, wifi doesn't turn on.
It seems wifi problem created by wm 6.1, allthough it worked fine 1 day after updating my prophet wm5 to wm 6.1.
I have tried with wm5 again, and it doesnt get warm untill I turn on the wifi manually, but with wm6.1 it gets warm from the boot, no need to turn on the wifi( if I turn off the wifi by registry tweek, it doesn't get warmed).
I have tried with most of the available roms(also radio roms) here, same problem, but definitely it's wifi was great before updating to wm6.1.
Can any one please help me in this situation?
Will be glad if you can.
With thanks.
try this ROM
hello..
i have the same problem as you are before and since i want to help you better try what i did..
i presumed that you already had HardSPL'ed your device if not follow this link...
http://forum.xda-developers.com/showthread.php?t=350033 if you cant download the files on this link try this one :
http://forum.xda-developers.com/showthread.php?t=310452
and heres the ROM that im using from Cloudyfa ofc credits to him/her!
http://forum.xda-developers.com/showthread.php?t=394991
wifi works well based on my experience the only problem is BT < when you try to receive a file from another device but heres the tweak for that.
using a simple registry edit tool..
[HKEY_LOCAL_MACHINE\Software\Microsoft\Obex]
"ObexServiceMask"=dword:3
"IsEnabled"=dword:1
btw the radio rom im using is the very recent one.. get it from here:
Prophet_G3_G4_RadioRom_v2.69.21.exe
http://wiki.xda-developers.com/index.php?pagename=Prophet_Radio_List
hope this helps...
my Qtek S200 is working like a charm now...
WowWow~~~
you are an expert now.........
nishaon said:
Hi every body,
My Prophet is warming up itself, battery is being consumed very quickly, wifi doesn't turn on.
It seems wifi problem created by wm 6.1, allthough it worked fine 1 day after updating my prophet wm5 to wm 6.1.
I have tried with wm5 again, and it doesnt get warm untill I turn on the wifi manually, but with wm6.1 it gets warm from the boot, no need to turn on the wifi( if I turn off the wifi by registry tweek, it doesn't get warmed).
I have tried with most of the available roms(also radio roms) here, same problem, but definitely it's wifi was great before updating to wm6.1.
Can any one please help me in this situation?
Will be glad if you can.
With thanks.
Click to expand...
Click to collapse
Did you ever get your problem fixed? am having the same problem but I belive its a hardware problem I have not found a solution as yet but can anyone tell me how to enable WiFi in the Regestry thanks
Hi guys !
I'm opening a new thread because I would like to fix a bad problem of the neotouch that actualy is causing me many problems.
The neotouch has obviusly bluetooth connection but when the phone is connected to another device via bluetooth and the phone goes in stand-by mode, the connection go down...it just reconnect instantly at wake up...this is bad for me as I need to have phone connected also in stand-by mode..
I think that there 2 way to fix this problem, or we say to the phone to not disable bluetooth when stand-by mode is on or we prevent the phone to go in stand-by mode when a connection is up and running. Personaly I think that the second one is the easy way ...
So I have really no idea of how I can do this, so I hope that unforseenenemy, arto, netnerd and anyone that know can do this kind of things can help to figure it out...also a rafyvito's help would be appreciated...
Thanks in advance to everyone that get interested...
Hey mate, the answer lies as usual in this forum
http://forum.xda-developers.com/showthread.php?t=483149
This app prevents your phone from going into stand by mode
Anyway i still hope that acer will fix the sleep issue.... it is really annoying indeed
yeh I have give it a try but it's not the best...I mean we should have don't sleep bluetooth !! Anywy I would ask something else, is there any way to modified htc bluetooth settings in order to not have stand by mode while bluetooth is running ??
Hello,
Please check this out, it will give you the answer to our BT problems:
http://translate.googleusercontent....gle.es&usg=ALkJrhgjZqk0x9TjBLrjZSc0nbdGZrFQWQ
User22 said:
Hello,
Please check this out, it will give you the answer to our BT problems:
http://translate.googleusercontent....gle.es&usg=ALkJrhgjZqk0x9TjBLrjZSc0nbdGZrFQWQ
Click to expand...
Click to collapse
I have reed that thread but it' not very clear....it say to use a programm called bt stack but I don't know very much about it ...anyway we are talinkg about this in unforseenenemy rom thread for now..
light_n_roses said:
I have reed that thread but it' not very clear....it say to use a programm called bt stack but I don't know very much about it ...anyway we are talinkg about this in unforseenenemy rom thread for now..
Click to expand...
Click to collapse
problem seems to be solved by using this : http://forum.xda-developers.com/showthread.php?t=273990
Can you confirm that this is working? when i tried it, it seems that it still turns to sleep mode.
might have done something wrong.. will try to mess around in the registry later
riotman said:
Can you confirm that this is working? when i tried it, it seems that it still turns to sleep mode.
might have done something wrong.. will try to mess around in the registry later
Click to expand...
Click to collapse
yes device still go in sleep mode but if you tried to comunicate with the phone via bluetooth from an external device it respondes now ...without it doesn't
so here are a few updates ! :
we have by right now 2 method to use our bluetooth connections !
The first is a registry tweak and you can find it here :
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Power\State\Suspend\{98C5250D-C29A-4985-AE5F-AFE5367E5006}
-change (Default) DWORD Dec to 1
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Power\State\Resuming\{98C5250D-C29A-4985-AE5F-AFE5367E5006}
-change (Default) DWORD Dec to 1
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Power\State\Unattended\{98C5250D-C29A-4985-AE5F-AFE5367E5006}
-change (Default) DWORD Dec to 1
this will continue to let you phone to go in stand by mode but will keep connection open so expect a low increase of drain battery ( anyway I have not noted much more consumption. ) this is thanks to Funky B.
The second way is use a program called "don't sleep" bluetooth that basically turn on bluetooth and disable stand-by at all for the device when the program is turned on. This has been created ad hoc from oldsap so many thanks to him for his job , you can find the program here : http://forum.xda-developers.com/showthread.php?t=483149