Hello,
im new on this forum and like it.
I search for set the power save mode in wifi adapter on my LG KS20. When the screen light off (after 2 minutes) my wifi connection is lost.
Any Expert know how to do this?
Found this in the kaisertweak topic.
http://forum.xda-developers.com/showpost.php?p=1677643&postcount=367
But I think the GUID is different on each type of device.
Ok thanks my problem is solved!!!
I'm sure this way can keep wi-fi alive. But Voip (SIP) program still not work well.
I hope the SIP still a alive,like GSM, that I can receive/dial Extention number.
anybody can solve it? thank a lot !!
Krypt said:
Found this in the kaisertweak topic.
http://forum.xda-developers.com/showpost.php?p=1677643&postcount=367
But I think the GUID is different on each type of device.
Click to expand...
Click to collapse
Related
I have not been able to turn on wifi reliably for ages now - It all started when I upgraded to WM5. Now (even if I downgrade to wm2003se) I cannot turn it on. I press the wifi on button, the cursor comes up but nothing happens), leave it for a couple of hours, and then press again - it will sometimes turn on. It then stays on for about 30 mins, and turns off (I have the wifi set to never turn off).
I cannot diagnose the problem - can you?
Any help GREATLY appreciated - feel free to ask for more details.
hardint0110
What you can do is to check the following keys in the registry:
HKLM\Comm\Tnetwln1\Parms\HTCPreloadstatus --> 1
HKLM\Comm\Tnetwln1\Parms\HTCPreloadwifi -->1
Both dword with decimal values. Next, when you made the changes, softreset and check if your wlan is working.
Keep us posted.
Cheers.
TheWizzard2203 said:
What you can do is to check the following keys in the registry:
HKLM\Comm\Tnetwln1\Parms\HTCPreloadstatus --> 1
HKLM\Comm\Tnetwln1\Parms\HTCPreloadwifi -->1
Both dword with decimal values. Next, when you made the changes, softreset and check if your wlan is working.
Keep us posted.
Cheers.
Click to expand...
Click to collapse
Dont seem to have the directory Tnetwln1
I am using a Blue Angel with xplode wm5 AKU 3.5.2 rom kitchen 2
i do have a directory called tiacwln1, and another called tiacwln.
I have attached them here, so you can have a look yourself:
(rename .doc to .reg if you need to)
Thought I had some progress there, but now all is back to normal...
Still no luck... found this: http://www.teksoftco.com/forum/viewtopic.php?t=194
but it wont turn WiFi on and off.
WIFI does not run on Wizard
I have not been able to turn on wifi reliably for ages now
I press the wifi on button, the cursor comes up but nothing happens), it will sometimes turn on. It then stays on for about 1 - 5 seconds, and shows connecting BUT DOES NOT CONNECT and turns off (I have the wifi set to never turn off).
I cannot diagnose the problem - can you?
Any help GREATLY appreciated - feel free to ask for more details.
Copied a part of the Message from the ORIGINAL THREAD
Thanx In advance
-jeasbe'
Thank you
The registry jack worked 4 me i don't know how to thank you really you helpde me a lot
No Luck..Need to USE THIS URGENT
I tried it but on Reboot My settings return back from
HKLM\Comm\Tnetwln1\Parms\HTCPreloadstatus --> 1
RETURNS BACK to
HKLM\Comm\Tnetwln1\Parms\HTCPreloadstatus --> 0
___________________________________________
The other setting
HKLM\Comm\Tnetwln1\Parms\HTCPreloadwifi -->1
Stays same
And after that, have you tried to soft-reset the device ?
There's a good change if don't, the change won't have any effect just like on you're desktop/laptop etc.
No Luck
Stevos said:
And after that, have you tried to soft-reset the device ?
There's a good change if don't, the change won't have any effect just like on you're desktop/laptop etc.
Click to expand...
Click to collapse
Of course, That's what I said that "I tried it but on Reboot My settings return back "
After the Reboot/ ie after the Soft reset.
No Luck
I have the same problem.
the value change back to 0 after soft-reset.
I tried several times even waiting for some minutes before soft-resetting.
So it means ??
NO LUCK ??
~smile~
@jeasbe: I just wanted to second your finding...
Actually I suspect some hardware/EEPROM issue like this (Hermes):
http://forum.xda-developers.com/showthread.php?t=304004
this is my story:
1. Got the Dopod from the provider with Chinese ROM (living in mainland China at the moment). Did not test WiFi.
2. After strongly insisting on an English GUI I got an update to an English ROM from the provider. Since then no WiFi
3. Asked the provider about WiFi on my Dopod. He confirmed that it was not working but had been working with the Chinese ROM before.
.... (so excluded user problem but still no solution)
4. Decided to upgrade by myself assuming the problem lies in the ROM version.
.... Upgraded step-by-step with the various ROM versions to XM6 according to tutorial 'n checked for each ROM version for WiFi. Still no WiFi.
5. Installed the WiFi patch for the commgr. No WiFi.
6. Read about that registry hack. Values do not remain after soft-reset. No WiFi.
7. Colleagues have the same problem (but still with the English ROM from the provider). So will ask one of them to hand-in to the provider to change back to Chinese ROM in order to see whether WiFi is working with that setting. But doubting it
8. any other ideas appreciated ...
another thread with similar issue:
http://forum.xda-developers.com/showthread.php?t=296936
It looks like the Hermes guys (Drummer) found a solution:
http://forum.xda-developers.com/showthread.php?t=322225
However, I am not an expert so don't whether it is possible the adapt the approach somehow to the Wizard.
any news here? ive got exactly the same problem
bug-i said:
any news here? ive got exactly the same problem
Click to expand...
Click to collapse
I found out that if you have a CHS version officially sold in China there is no WiFi feature in the phone - this rule applies for all models from any manufacturer.
I am not sure though whether it is really hardware (like missing the WLAN chip) or software issue (on a level below the ROM, because change to different ROM [incl. change of IPL/SPL and radio] won't help).
I did a few searches on this topic in the forum and didn't really find any definitive answers. What I'm looking for is if it is possible to have the EVDO data to be automatically disconnected after a certain number of minutes of inactivity. I have already tried the GPRS auto disconnect software by GB-SOFT and it does not appear to work.
Does anyone know if this is possible?
Thanks in advance.
Anyone have an idea?
yes use the moslki performance reg cab
xpgeek said:
Anyone have an idea?
Click to expand...
Click to collapse
you will have full control but most likely it will just work with out touching it.
50/;50 if you don't pay for data it will be free\
on my previous phone (kaiser) you could make the phone remain on gprs and this would help with the battery life as the phone would not constantly be searching for 3G etc.
Can this be done on the dual?
Tothotspur said:
on my previous phone (kaiser) you could make the phone remain on gprs and this would help with the battery life as the phone would not constantly be searching for 3G etc.
Can this be done on the dual?
Click to expand...
Click to collapse
Exactly in the same manner you have done with your Kaiser.
when you remember please post it so i can try, gettin sick to from constantly research 3G
Best way to do that is add the "3G" line in the COM manager with Schaps tool.
zoharbl said:
Exactly in the same manner you have done with your Kaiser.
Click to expand...
Click to collapse
no it is not because when i choose gsm on the band the phone constantly searches for my operator but never finds it!!
I will try to find this Schaps tool
schaps tool does the trick!! thanks GpsPasSion!
link for anybody else that wants it:
http://forum.xda-developers.com/showthread.php?t=317070
try this
http://forum.xda-developers.com/showpost.php?p=1732676&postcount=7
works perfectly, and with the other options on saved me some memory as well great tool thanxx
yep, great tool, what options did you use to save memory ?
Hi Folks,
a friend of mine also have the Blackstone (me too). He uses O2, and has a strange problem. When he receive a MMs, the device stays connected after the message has been downloaded.
Is there a registry tweak to solve this problem?
I wil put this thread up, due to be seen better. Does nobody have a clue?
Well, you can use HD Tweak so data connection disables after a set time when not used.
THX, i wil try this.
But.... I´m so stupid: I´ve allready installed HD Tweak on my Blackstone, but i havn´t seen the point "GPRS-Disconnection"...
Hope this will solve the problem.
Candy-men said:
THX, i wil try this.
But.... I´m so stupid: I´ve allready installed HD Tweak on my Blackstone, but i havn´t seen the point "GPRS-Disconnection"...
Hope this will solve the problem.
Click to expand...
Click to collapse
Go to 6.1 Disconnect After
Thats why i love this forum...
Thx for the fast and furious answers...
Hi guys !
I'm opening a new thread because I would like to fix a bad problem of the neotouch that actualy is causing me many problems.
The neotouch has obviusly bluetooth connection but when the phone is connected to another device via bluetooth and the phone goes in stand-by mode, the connection go down...it just reconnect instantly at wake up...this is bad for me as I need to have phone connected also in stand-by mode..
I think that there 2 way to fix this problem, or we say to the phone to not disable bluetooth when stand-by mode is on or we prevent the phone to go in stand-by mode when a connection is up and running. Personaly I think that the second one is the easy way ...
So I have really no idea of how I can do this, so I hope that unforseenenemy, arto, netnerd and anyone that know can do this kind of things can help to figure it out...also a rafyvito's help would be appreciated...
Thanks in advance to everyone that get interested...
Hey mate, the answer lies as usual in this forum
http://forum.xda-developers.com/showthread.php?t=483149
This app prevents your phone from going into stand by mode
Anyway i still hope that acer will fix the sleep issue.... it is really annoying indeed
yeh I have give it a try but it's not the best...I mean we should have don't sleep bluetooth !! Anywy I would ask something else, is there any way to modified htc bluetooth settings in order to not have stand by mode while bluetooth is running ??
Hello,
Please check this out, it will give you the answer to our BT problems:
http://translate.googleusercontent....gle.es&usg=ALkJrhgjZqk0x9TjBLrjZSc0nbdGZrFQWQ
User22 said:
Hello,
Please check this out, it will give you the answer to our BT problems:
http://translate.googleusercontent....gle.es&usg=ALkJrhgjZqk0x9TjBLrjZSc0nbdGZrFQWQ
Click to expand...
Click to collapse
I have reed that thread but it' not very clear....it say to use a programm called bt stack but I don't know very much about it ...anyway we are talinkg about this in unforseenenemy rom thread for now..
light_n_roses said:
I have reed that thread but it' not very clear....it say to use a programm called bt stack but I don't know very much about it ...anyway we are talinkg about this in unforseenenemy rom thread for now..
Click to expand...
Click to collapse
problem seems to be solved by using this : http://forum.xda-developers.com/showthread.php?t=273990
Can you confirm that this is working? when i tried it, it seems that it still turns to sleep mode.
might have done something wrong.. will try to mess around in the registry later
riotman said:
Can you confirm that this is working? when i tried it, it seems that it still turns to sleep mode.
might have done something wrong.. will try to mess around in the registry later
Click to expand...
Click to collapse
yes device still go in sleep mode but if you tried to comunicate with the phone via bluetooth from an external device it respondes now ...without it doesn't
so here are a few updates ! :
we have by right now 2 method to use our bluetooth connections !
The first is a registry tweak and you can find it here :
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Power\State\Suspend\{98C5250D-C29A-4985-AE5F-AFE5367E5006}
-change (Default) DWORD Dec to 1
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Power\State\Resuming\{98C5250D-C29A-4985-AE5F-AFE5367E5006}
-change (Default) DWORD Dec to 1
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Power\State\Unattended\{98C5250D-C29A-4985-AE5F-AFE5367E5006}
-change (Default) DWORD Dec to 1
this will continue to let you phone to go in stand by mode but will keep connection open so expect a low increase of drain battery ( anyway I have not noted much more consumption. ) this is thanks to Funky B.
The second way is use a program called "don't sleep" bluetooth that basically turn on bluetooth and disable stand-by at all for the device when the program is turned on. This has been created ad hoc from oldsap so many thanks to him for his job , you can find the program here : http://forum.xda-developers.com/showthread.php?t=483149