I did a few searches on this topic in the forum and didn't really find any definitive answers. What I'm looking for is if it is possible to have the EVDO data to be automatically disconnected after a certain number of minutes of inactivity. I have already tried the GPRS auto disconnect software by GB-SOFT and it does not appear to work.
Does anyone know if this is possible?
Thanks in advance.
Anyone have an idea?
yes use the moslki performance reg cab
xpgeek said:
Anyone have an idea?
Click to expand...
Click to collapse
you will have full control but most likely it will just work with out touching it.
50/;50 if you don't pay for data it will be free\
Related
Hiya,
Noob here - please be gentle
Have been borwsing the site for a few days and still haven't found a definitive answer to this:
I have uninstalled the o2 bloat, but still want to be able to access o2's wap stuff (for train times, etc)
When I am at home and connected to wifi I want to use that, but when I'm out on the road I want to use GPRS. I have read somewhere that you can set up wifi to be the first port of call, and if that's not available then use GPRS. Any ideas? C'mon - you're clever!
Thanks
anyone?
this is a question i heared a lot, but never found an answer.
herbie65 said:
anyone?
this is a question i heared a lot, but never found an answer.
Click to expand...
Click to collapse
Have you tried the program called NoData? You can toggle it on and off
I have my data connection (3G, EDGE) ON 24 x 7 and I noticed that when I turned on Bluetooth on the device, it kills my data connection. The "U" or "G" icon disappear and the regular "Y" (antennae) icon is shown. All pending connection (i.e. file download) stopped.
This cause an issue with me because if I am downloading some data (I.e. Windows Live) and I need to connect to my Bluetooth headset, the download will fail because the data connection stopped.
Any one experienced this?
Anyone? Hello?
..........
i have always had this issue whether hermes or wizard.. i think its just a common thing.. i dont believe there is a fix, but i could be wrong
lifterus said:
Try a hard reset. If you've installed a lot of stuff, use SBP Backup first. If that doesn't fix then return it.
Click to expand...
Click to collapse
I have tried that, believe me. I also have 2 Cingular 8525 with different S/N and both exhibit the same problem. I am trying to avoid or at least delay returning the device until I confirmed that this is a known issue that won't be fixed until the next firmware.
In any case, I posted the question hoping that someone can help me just by turning on BT WHILE they're connected. Simple.
Throwing back the same suggestion you have given, would you return your device at the slightest hang or issue without posting on the forum, this one or anywhere else?
shogunmark said:
i have always had this issue whether hermes or wizard.. i think its just a common thing.. i dont believe there is a fix, but i could be wrong
Click to expand...
Click to collapse
Thanks for confirming that. That's 4 Hermes (2 of mine, 1 belonging to my friend and yours) with the same problem.
Hello,
im new on this forum and like it.
I search for set the power save mode in wifi adapter on my LG KS20. When the screen light off (after 2 minutes) my wifi connection is lost.
Any Expert know how to do this?
Found this in the kaisertweak topic.
http://forum.xda-developers.com/showpost.php?p=1677643&postcount=367
But I think the GUID is different on each type of device.
Ok thanks my problem is solved!!!
I'm sure this way can keep wi-fi alive. But Voip (SIP) program still not work well.
I hope the SIP still a alive,like GSM, that I can receive/dial Extention number.
anybody can solve it? thank a lot !!
Krypt said:
Found this in the kaisertweak topic.
http://forum.xda-developers.com/showpost.php?p=1677643&postcount=367
But I think the GUID is different on each type of device.
Click to expand...
Click to collapse
I know hp612 has the AGPS function, but don't know how to turn it on.
Is there anybody who know how to do? plz advise.
Thanks.
wongwon said:
I know hp612 has the AGPS function, but don't know how to turn it on.
Is there anybody who know how to do? plz advise.
Thanks.
Click to expand...
Click to collapse
Hi,
Look here ....
Dirk
I don't think that HP612 really has the AGPS function.
HP612 can't read cell id and get Google Map's "My Laoction/Position" info without GPS-on. Rilgsm.dll and/or Radio FW/hardware should have some problem.
wongwon said:
I know hp612 has the AGPS function, but don't know how to turn it on.
Is there anybody who know how to do? plz advise.
Thanks.
Click to expand...
Click to collapse
Have a look at HP's document
http://www13.itrc.hp.com/service/cki/docDisplay.do?docId=emr_na-c01459007-2&docLocale=en&admit=109447627+1241303882132+28353475
This doesn't really clear things up for me: "However, it has a default GPS Utility called Assisted GPS"
The 900 series come with a GPS QK Position application, which downloads Ephemeris data. This looks more like assistance that could work:
http://h20000.www2.hp.com/bizsuppor...Id=110&prodSeriesId=3551665&prodTypeId=215348
Anyone have good experience with this app on the 600 with the Yevg001-ROM ?
i heard agps turn on automatically when you have gprs connection
keyx said:
i heard agps turn on automatically when you have gprs connection
Click to expand...
Click to collapse
I have never seen any data activity on WAN connections when the GPS is used. There are many forms of Assisted GPS and maybe HP mentions this feature just because the Qualcomm chipset has this ability.
The strange thing is that my GPS fixes faster since I've flashed back to the original ROM after briefly trying Yevg001 ROM (the one with TouchFlo). Could it just be the weather? Or does some driver (helper) became active again.
There are too many variables. It would be nice if HP just published some info on their implementation.
Hi all,
firstly the software situation:
I have an HTC Touch Diamond2 wit a german Vodafone branding. Last week i installed the new official upgrade for german Vodafone devices - ROM version 2.16.162.1 HTC Touch Diamond2 (Voda_ DE).
With the old ROM and WM Version i didn't have this problem. Now - with every start of my TomTom Navigator after about 10 seconds a data connection is started. If there's wifi around - wifi, if not - mobile service. When i switch off the connection it stops and for some minutes - until i turn off the navigator it remains switched off. I haven't tested if during some time of the navigation it is turned on again.
In other discussions other users (with other navigation software) have also affirmed, that they also get an unwanted data connection.
Since then i have tried everything that i could think of. I looked over every setting in the TomTom software. Tried over TomTom Home. Tried reinstalling TomTom. Tried resetting to factory settings of TomTom. Nothing helped.
I then made a couple of hardresets of the device and i formatted the memory card also a couple of times. I then installed everything fresh - still demands data connection.
I then tracked the connections with a trafficmonitor software - one time wifi connection, one time mobile service ceonnection.
Looks like this:
WiFi:
system : 3.5 K
WZCSVC.dll : 1.2 K
mobile connection:
system: 1.2 K
WZCSVC.dll is Wireless Zero Configuration Service and i can at least understand why it is making traffic, since wifi is in use.
What is "system"?
Also - why more traffic for "system" with wifi than with mobile connection?
Yesterday i also tracked the connection and there was another .dll service which name i unluckily didn't mark. But it was gps*something*.dll.??
Could AGPS or Quick-GPS have something to do with this behaviour? Or the My Location service? I disabled and declined every setting that i could discover for those services, but i may have overlooked something?
Any ideas?
Please HELP!
Any suggestion would be appreciated!
Thanks in advance!
Problem solved (looks like it at least).
After installing HD Tweak and disabling A-GPS no data connection starts with starting the navigator.
Glad you solved your issue, but let me witness that in my case (i have A-GPS ON) when i use tomtom (7.916.9189) no data connection is going on. Anyway,just to be sure to keep your problem under control, i advice you to check also the weather update settings.
san.medius said:
After installing HD Tweak and disabling A-GPS no data connection starts with starting the navigator.
Click to expand...
Click to collapse
A little worrying. I am off to Amsterdam tomorrow and want to use TTN7 without getting stung for a data connection.
sualc said:
Glad you solved your issue, but let me witness that in my case (i have A-GPS ON) when i use tomtom (7.916.9189) no data connection is going on. Anyway,just to be sure to keep your problem under control, i advice you to check also the weather update settings.
Click to expand...
Click to collapse
If you mean the two options which appear directly when the HTC Sence Weather Tab is opened - "update weather automatically" and "update with roaming" - i've checked them many times - they are off. If there is another setting where they can be adjusted i would appreciate it if you told me where and how. But i don't think this is it. Unless TomTom Weather is doing this.
But as i mentiones - there was a gps*something*.dll file, that caused the data transfer - that's why i thought it is something GPS related.
But I wouldn't mind to use another solution because now i think my gps signal is not that strong (at least in buildings).
Do you have 6.5 also? I don't think it could be a ROM thing?
A little worrying. I am off to Amsterdam tomorrow and want to use TTN7 without getting stung for a data connection.
Click to expand...
Click to collapse
As far as i could test it it makes the connection just once after starting the navigation. It doesn't keep pulling data the whole time. If it does it the whole time during a navigation - i don't know, haven't tested it.
But you can at least test it quickly before travelling - navigation on - status check. If something's moving - you have a problem.
There is one simple solution - you can either disable all automatic connection types - then you would't be able to surf the internet. In my case i didn't want to have to disable everything and/or to enable it by hand every time i use the navigator.
Or you can install HD Tweak and disable A-GPS. It's really very easy.
http://montecristoff.webs.com/hdtweak.htm
san.medius said:
Or you can install HD Tweak and disable A-GPS. It's really very easy.
http://montecristoff.webs.com/hdtweak.htm
Click to expand...
Click to collapse
Thanks. I installed that and it seems that A-GPS is disabled by default. And it doesn't seem to get switched on by TTN7. Now I can wander the streets of Amsterdam without a worry
Mike Austin said:
Thanks. I installed that and it seems that A-GPS is disabled by default. And it doesn't seem to get switched on by TTN7. Now I can wander the streets of Amsterdam without a worry
Click to expand...
Click to collapse
Without A-GPS enabled make sure you don't enter the wrong coffeeshop!!
By the way..Also TD2 Tools and Tom's Topaz Setting Tool can enable/disable A-GPS and are more specific for our devices...your choice...and have a nice trip
sualc said:
Without A-GPS enabled make sure you don't enter the wrong coffeeshop!!
By the way..Also TD2 Tools and Tom's Topaz Setting Tool can enable/disable A-GPS and are more specific for our devices...your choice...and have a nice trip
Click to expand...
Click to collapse
Hi,
have you tested HD Tweak? I'm just asking for comparison reasons. I used it just because someone said it worked.
If the other two are more suitable for the Topaz i would of course prefer them. Is there "a better one" comparing the two?
P.S. Following question just entered my mind. If i uninstall the other tweak software what happens with the changes i made with it. I mean i guess it changes values in the registry so that the settings are changed? I suppose everything will stay as the software "left" it before being uninstalled?
I use HDTweak to increase overall sound volume only. I had it installed for months in a previous config and I was quite happy with it, but the specific tweak apps look more friendly to me. I guess that if you uninstall hdtweak without restoring the default settings you will keep the tweaks applied..at your own risk