i rooted my phone but i forgot to perform a nandroid backup, so now my phone only turns on when i load a custom rom , does anyone know how i can get my stock rom back?????????
there is a tut of getting back to stock in the development section. or look on modaco.
your phone is not broken
dynomyar said:
i rooted my phone but i forgot to perform a nandroid backup, so now my phone only turns on when i load a custom rom , does anyone know how i can get my stock rom back?????????
Click to expand...
Click to collapse
You can search.
Well now that you've unlocked the bootloader there really is no point in going back to a stock rom. Might was well flash Cyanogen on it.
Related
Ok, so I'm currently using bionix 1.9 with stock kernel. I really want to flash bionix fusion with kingxklicks kernel, from what here this is a great rom.
My question, is there anything I should know about flashing this i.e. going back to stock rom? Is there anything I need to do before flashing this?
If I decide to go back to stock rom can I just flash with odin? Do I have to flash stock kernel before flashing back to a stock rom?
Can anyone just let me know, I would like to be prepared in case anything does go wrong.
Nope, you should be safe to flash directly over your current rom. As a precaution, if you have Ryanza's OCLF, you might consider undoing the lag fix... not saying it is needed but more often than not, most people who have a problem start off with saying " Help, I just tried flashing (xyz rom) and now I am stuck at the bootscreen. I had (abc rom) and OCLF before... what could be wrong?" Any other questions be sure to consult the red text in my sig.
Ok cool, even then I have been stuck on the boot screen a couple of time. Odin fixed that problem.
Sent from my SGH-T959 using XDA App
Other than making a nandroid backup and maybe a titanium backup, you should be good to go ...
Fusion 1.1 is a wipe ROM so may want to backup your apps ....
EDIT: Ok so I flashed it back to 2.1 stock, i'm gonna try flashing Bionix again, is there something I should do before flashing it? Am I in the wrong version or something? Help!
Ok so here's the situation:
I was running Axura 2.0.3 or something and things were ok, but I wanted to flash to something better, so I downloaded the Bionix Frost 2.2.1 ROM and flashed it. It didn't have any of my contacts or SMS so I went to flash it back to my last backup, which was 12/15/10, and Axura. I go to Clockwork Mod, and run the nandroid backup and now when my phone boots up, it goes through the screens, and freezes on the Galaxy S screen, then everything turns black and when I touch the screen, all the bottom buttons light up, but nothing happens, and the only way to get that to turn off is to pull the battery.
Is there any way I can fix this? I have Odin, but i'm not sure exactly what to do here.
flash a kernel. nandroid does not restores kernel.
Sent from my SGH-T959 using XDA App
First things first, calm down.
This is not hard, but it can seem that way if you freak.
Did you read the guides? Did you download rom manager, flash cwr, go to stock recovery and reinstall packages (twice maybe)?
i really think it's about flashing a kernel.
Sent from my SGH-T959 using XDA App
So what kernel do I need? I'm back at full 2.1 stock, and I want to get back to my Axura 12/15/10 nandroid, do I need a kernel?
That axura is 2.2 right? So any 2.2 kernels should be fine,
flash nandroid then before rebooting flash kernel.
In the phone information it says my Kernel is 2.6.29? It says firmware version is 2.1update 1.
If I just want to flash to Bionix, do I need to update a kernel or can I just go straight ahead and do that?
yes. you don't need to flash a kernel when you flash bionix.
You only need to flash a kernel when you are restoring a nandroid backup.
Thanks, you helped a lot.
One last question: how do I move my contacts and SMS over? Whenever I flash a new ROM I seem to lose it.
xKrazYx626 said:
In the phone information it says my Kernel is 2.6.29? It says firmware version is 2.1update 1.
If I just want to flash to Bionix, do I need to update a kernel or can I just go straight ahead and do that?
Click to expand...
Click to collapse
2.6.29 froyo .....u need 2.1 eclair kernel !!!!!
What if when rebooting to recovery re-installing packaged always end up in failure? Should I go ahead and flash a rom?
Sent from my SGH-T959 using XDA App
I Think i have bricked my nexus s ......it wont startup and goes to do first setup but force closes....i can access recovery but when i flash a rom it aborts ....only just bought it
U can odin it back to stock. Check out the android dev forums
Sent from my Nexus S using XDA App
afishpie said:
U can odin it back to stock. Check out the android dev forums
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Please can you elaborate...or point me in right direction......recovery is now only accessible by flashing it first....phone just wont do anything
download a 2.3.3 nandroid backup and restore to it using clockwork recovery
ignore odin.
http://forum.xda-developers.com/showthread.php?t=884093
update to 2.3.3 using http://android.clients.google.com/p...2cf141e6a.signed-soju-ota-102588.f182cf14.zip
or just download CM7 and flash that along with gapps (wipe dalvik/cache/factory)
and your phone is not bricked. the definition of a bricked phone is a phone who cannot access recovery/fastboot/etc.. can access absolutely nothing
Well, he does say that his attempts to flash a rom always abort...
OP, we need more details.
Are you using Clockwork Recovery? Which version? Try an older/newer version...
What ROM are you trying to flash? Have you tried others?
What happens when you try a normal boot? You say you get as far as the first setup screen?
Have you tried a Factory Reset of the phone from within recovery (stock or clockwork)?
distortedloop said:
Well, he does say that his attempts to flash a rom always abort...
OP, we need more details.
Are you using Clockwork Recovery? Which version? Try an older/newer version...
What ROM are you trying to flash? Have you tried others?
What happens when you try a normal boot? You say you get as far as the first setup screen?
Have you tried a Factory Reset of the phone from within recovery (stock or clockwork)?
Click to expand...
Click to collapse
Many thanks to both of you.....for your help .....so much appreciated......i have got past first setup screen after applying a nandroid backup......it finally worked after 5 times trying....but i have stock android recovery but rom manager on phone .....how can i get clockwork mod back as everytime i flash it.....i get to use it for that one instance ans then it returns to stock android recovery
I think it might be okay now ....after titanium said busybox was installed....i dont think it was done correectly.....after downloading busy box from market....recovery seems to be sticking rather then reverting back to android. Just to check....is there anything i should do to check all is well on my phone and also while flashing i think i changed build number from IR to GH (what are the implications of this move? many thanks...phew
EDIT- NO recovery still wont stay....any ideas?
menov321 said:
I think it might be okay now ....after titanium said busybox was installed....i dont think it was done correectly.....after downloading busy box from market....recovery seems to be sticking rather then reverting back to android. Just to check....is there anything i should do to check all is well on my phone and also while flashing i think i changed build number from IR to GH (what are the implications of this move? many thanks...phew
EDIT- NO recovery still wont stay....any ideas?
Click to expand...
Click to collapse
That's normal. See below:
It's normal to lose the recovery after the reboot, the steps to flash the CW recovery needs to be repeated every time you want to access the CW recovery.
This is due the build in protection in 2.3
As some one pointed it out on another topic, the good thing about this is that you'll never lose the stock recovery of 2.3, thus minimizing the chance of a bricked phone.
If you want to the CW recovery to remain permanently, you'll need to rename /etc/install-recovery.sh to something thing else
sano614 said:
That's normal. See below:
It's normal to lose the recovery after the reboot, the steps to flash the CW recovery needs to be repeated every time you want to access the CW recovery.
This is due the build in protection in 2.3
As some one pointed it out on another topic, the good thing about this is that you'll never lose the stock recovery of 2.3, thus minimizing the chance of a bricked phone.
If you want to the CW recovery to remain permanently, you'll need to rename /etc/install-recovery.sh to something thing else
Click to expand...
Click to collapse
Thankyou SOOO MUCH.....you put my mind at rest......can you maybe help me with one other thing.....WHEN I MESSED UP EARLIER i flashed a different rom build.....does this have any negative affect on the phone....my stock rom was a IR something but i flashed a GR or GH something....
menov321 said:
Thankyou SOOO MUCH.....you put my mind at rest......can you maybe help me with one other thing.....WHEN I MESSED UP EARLIER i flashed a different rom build.....does this have any negative affect on the phone....my stock rom was a IR something but i flashed a GR or GH something....
Click to expand...
Click to collapse
No it doesn't. You're fine. The latest is android 2.3.3 with GRI40.
Sent from my Nexus S using Tapatalk
hello everyone,
few days ago i pruchased a new kingston 16g card, and follow the resource bible tried to restore my cell back to stock. i format the sdcard, insert to the slot, and then follow the steps "stock nandroid retore" http://forum.xda-developers.com/showthread.php?t=845756
everything worked fine, i am sure it was completed, but at the very last step to reboot my phone, it stuck at "mytouch 4g" boot screen, cant reboot into the system, bricked i think? so i tried another thread by using PD15IMG, finally i can back to normal and a clean stock status.
(my phone is s-off, permrooted, oc1.5g)now my question is, why can't i success the nandroid restore? did i do anything wrong or do i need some more roms/files/images on my new sdcard? after this i even tried to backup my own nandroid backups and then run restore via rom manager, but i still got the same results, can't completed nandroid restore, always stuck at mytouch 4g boot screen
sorry for my really bad English, hope u guys can understand me... i just need an answer/method/guide that i can try some more new roms/oc kernels in the future without worry bricking my phone. dont really wnat to go over and over again the PD15IMG, i got scared though...
Thank you for ur help!
You probably flashed recovery version 3.0.0.5 in which you cannot restore your stock ROM with. If you don't have another ROM, you should install a gingerbread ROM such as CM7 and then flash the 3.0.0.6 recovery available in the development thread. Don't worry, your phone is not bricked. If you can turn it on and get into recovery or hboot, it can always be fixed.
I think your problem is that you had the wrong recovery. Flash Drew's 3.0.0.6 zip file to get that recovery and then pick 3.0.0.5 in more recoveries in Rom Manager. Also do your nandroids and restore in Recovery. I never go thru rom manager, it just works better that way for me.
really thank you both for the quick response
i just followed this http://forum.xda-developers.com/showthread.php?t=944681 ,looks like i completed all the steps, but when i reboot and open rom manger, it still shows current/latest recovery:clockworkmod 3.0.0.5, so idk whether i did it right or not?
anyways, later on i might try either my won nandroid backup/recovery or the stockclean recovery again, then we will know the results...
i really appreciate for ur help!
Yes, when you open up all recoveries in Rom Manager it will still show as 3.0.0.5. If you followed the steps correctly when you flash that one and open up recovery, it will actually be 3.0.0.6 which will show at the top. This version allows you to switch between froyo (2.x) and gingerbread (3.x) based ROMs.
strcheng said:
really thank you both for the quick response
i just followed this http://forum.xda-developers.com/showthread.php?t=944681 ,looks like i completed all the steps, but when i reboot and open rom manger, it still shows current/latest recovery:clockworkmod 3.0.0.5, so idk whether i did it right or not?
anyways, later on i might try either my won nandroid backup/recovery or the stockclean recovery again, then we will know the results...
i really appreciate for ur help!
Click to expand...
Click to collapse
In clckworkmod it will always show 3.0.0.5. Flash the 3.0.0.5 in more recoveries. Then when you go in recovery it will read 3.0.0.6 sounds confusing but its not once you got it. Happy flashing!
one more question
since my software information shows 2.2.1 version, am i on froyo or gingerbread? sry for the stupid question...just cuz i wanna flash an OC kernel but don't know which one should i pick? stock kernel or CM7-Gingerbread kernel? http://forum.xda-developers.com/showthread.php?t=876848
i remember i flashed this "Kernel 2.6.32.21grankin010OC0v0.05" yesterday, and it frozen my phone after reboot
thank you again
strcheng said:
one more question
since my software information shows 2.2.1 version, am i on froyo or gingerbread? sry for the stupid question...just cuz i wanna flash an OC kernel but don't know which one should i pick? stock kernel or CM7-Gingerbread kernel? http://forum.xda-developers.com/showthread.php?t=876848
i remember i flashed this "Kernel 2.6.32.21grankin010OC0v0.05" yesterday, and it frozen my phone after reboot
thank you again
Click to expand...
Click to collapse
Froyo...what rom are you using, ill point you the right way. There's two kernel's for 2.2.1 depending on what rom
Lakeshow423 said:
Froyo...what rom are you using, ill point you the right way. There's two kernel's for 2.2.1 depending on what rom
Click to expand...
Click to collapse
don't really know though...
but the only things i ever touch/flash/install was stockclean.zip (it was failed cuz 3.0.0.5) and PD15IMG.zip, as i remembered...
or can u tell me how to read current rom version?
strcheng said:
don't really know though...
but the only things i ever touch/flash/install was stockclean.zip (it was failed cuz 3.0.0.5) and PD15IMG.zip, as i remembered...
or can u tell me how to read current rom version?
Click to expand...
Click to collapse
Try to downlaod royal glacier 1.2, you'll like it. Its lakeshow stock rom but on steroids. Deverginze your rom flashing lol.
Lakeshow423 said:
Try to downlaod royal glacier 1.2, you'll like it. Its lakeshow stock rom but on steroids. Deverginze your rom flashing lol.
Click to expand...
Click to collapse
on steroids!! LMAO, i read the thread, this rom looks really interesting
thanks for the suggestion but i will stay with stock rom for now(am i on stock rom? dunno), i am gonna learn more things about the android system step by step.
strcheng said:
on steroids!! LMAO, i read the thread, this rom looks really interesting
thanks for the suggestion but i will stay with stock rom for now(am i on stock rom? dunno), i am gonna learn more things about the android system step by step.
Click to expand...
Click to collapse
SMART! read alot, the community is here to help.
Hey guys have a couple questions. I have the infamous s4 ROM and kernel right now. Working well. I backed it up with orange back up. My question is where does that back up go incase I can't install a new ROM and want to go back to my infamous with all my settings and everything? Also what are the main differences between the infamous alpha s4 7.2 and infamous s4 4.0 ROMs and kernels?
Division4thor said:
Hey guys have a couple questions. I have the infamous s4 ROM and kernel right now. Working well. I backed it up with orange back up. My question is where does that back up go incase I can't install a new ROM and want to go back to my infamous with all my settings and everything? Also what are the main differences between the infamous alpha s4 7.2 and infamous s4 4.0 ROMs and kernels?
Click to expand...
Click to collapse
I don't know what organge backup is, but you should be using NANDROID.
Boot to recovery in either TWRP or CWM, whichever custom recovery you have installed, and from there you can back up everything. You should always make a NANDROID backup before flashing a new ROM...and whenever you want, you can restore everything from there.
Yes it is a nandroid back up. I just wasn't sure b4 you back it up in twsp recovery and then wipe everything I didn't know where the back up goes