Related
any detailed how to guide?, i can do it, i'm fairly tech savvy, so i just need to kneed out a few things. maybe if you caould start from the beginning and i can see where i went wrong.
logmein.com works, but i want something more personal, just bewtween the computer and my phone. somerthing that looks good and scales full screen preferably.
please guys?, point me in the right direction.. all the posts just keep saying to search and there's lots of info, but there's no step by step guide.
thanks guys!
ok i got it going.
first go to the computer you want to connect to and go to control panel / system
click on remote, enable remote users
go to start menu, run. type cmd
in command write "ipconfig /all"
take note of your ip address
on your phone go to remote desktop,
computer = your ip address
username = (go to startmenu, control panel, user accounts) use one of those names.
password = blank unless you have a password.
domain = i left blank.
connect full color unless it doesnt work for you
if you can connect and you get a password error
type the error you get inot google and you should get a fix as your first link.
try that.
blam, remote desktop, it's awesome.
Nice how-to...
this is the most succinct tutorial on how to do this that I've seen. I'm still having trouble, though. I get the "Cannot connect. Likely reason are: 1 the remote comupter is not set up for this. 2. Reached the maximum number of connections. 3. A network error occurred while connecting."
I have set up the XP PC, & taken down all firewalls. I only have one user account and it has a password. I've even tried using Hamachi with one of their VPN ip addresses (awesome and free for pc2pc). I 've combed trhough my router settings too, and tried to clear everything there, too. I can RD from an XP laptop, so ti seems to be something on the unit, to me. I've also setup file sharing w/ Total Commander (it's served my purposes amply).
I really have googled & googled & googled. If anyone has any idea what is going on, I'd be grateful for some ideas.
Have you enabled the RDP on the host computer?
Right click my computer
Properties
Remote
Then enable allow user to connect remotely.
Will only work on XP Pro, or Vista if you choose to allow older clients which they scaremonger you against by saying it's less secure.
Danke!
I've been scared away from Vista for the usual "new" OS reasons, but perhaps it's getting to be time for me to haul my old conservative back-end into the modern world.
Thanks so much for taking the time!
(and to Biohead: yes, I followed the instructions I lauded so vehemently.... ???)
you're running vista?
and you haven't been able to connect still, right?
sorry i could walk you through xp, but man vista sucks, i wouldn't touch it with a 10 foot pole.
i'm setting up remote desktop on my iphone
hahaha totally referred to this guide
and it sucks, so i'm sticking with vnc
man, i miss my exec/universal
dutchschultz said:
any detailed how to guide?, i can do it, i'm fairly tech savvy, so i just need to kneed out a few things. maybe if you caould start from the beginning and i can see where i went wrong.
logmein.com works, but i want something more personal, just bewtween the computer and my phone. somerthing that looks good and scales full screen preferably.
please guys?, point me in the right direction.. all the posts just keep saying to search and there's lots of info, but there's no step by step guide.
thanks guys!
Click to expand...
Click to collapse
Hope this helps
http://forum.xda-developers.com/showthread.php?t=366312
http://forum.xda-developers.com/showthread.php?t=294524
orb3000 said:
Hope this helps
http://forum.xda-developers.com/showthread.php?t=366312
http://forum.xda-developers.com/showthread.php?t=294524
Click to expand...
Click to collapse
you, my friend, are awesome
A possible solution for those of us on T-Mobile's standard web n walk
Sorry to resurrect this thread, but I thought I'd post my experiences here in case anyone else (like me) searches for a solution to enabling RDP on T-Mobile (UK at least).
I was having the same problem with remote desktop, it saying that the server was not available. I phoned up T-Mobile's helpdesk as recommended here and after getting past first line support (who didn't know what remote desktop was, and tried sending new connection settings to my phone to resolve the issue) I got through to someone who knew what they were talking about. Turns out that I'm on T-Mobile's "basic" or "handset-only" web-n-walk package, and it's not possible to use RDP on this. I assume they block the relevant ports. They told me that I could pay an extra fiver a month to upgrade to a version of web-n-walk which can handle RDP.
Well I told them I would think about it, but instead tried to find a way around it as the one or two times I need to use RDP are certainly not worth a fiver a month. My solution is probably only suitable for the more techy of us, but without much work and with no prior experience I managed to set up a SSH tunnel using FreeSSHd as a server running on my windows server (although a normal windows box should work fine - http://www.freesshd.com/) and zaTunnel as a client on my phone (http://www.zatelnet.com/zatunnel/main.php). Both programs are free.
Basically my phone takes all RDP connections and tunnels them over SSH to my windows server, which then turns them back into RDP connections. T-Mobile have no idea I'm using RDP, and if they block the SSH port in the future I can always change FreeSSHd to run on port 80 (for web). This will also work for other protocols T-Mobile might be blocking (FTP springs to mind).
Just thought I'd post this in case anyone was in my situation of needing RDP on their standard web'n'walk.
Edit Sorry posted this in the wrong thread! Will leave this post up however just in case someone finds it useful
echolock
Many thanks for the above have been searching everywhere for a fix to this. I am the same as you T Mobile (UK) and can't connect.
Could you give some additional advice as how you got the RDP to work.
For the record I can connect by Wi-Fi and by using a PAYG sim from a different carrier. However, I am on a contract with T Mobile and don't want to carry a different sim just to use the RDP.
I have installed both apps. I can make a connection from zaTunnel on Port SSH:24 to the freeSSHD server (SSH - listening on port 24). Other than adding a User and changing the default port to 24 there are no other changes I have made in freeSSHD.
Under the connections tab in zaTunnel I have left Network: Automatic with the other settings relevant to make a connection.
Under the ports tab of zaTunnel I have
LP> 3389,
IP/URL . IP of the desktop I want to connect to of 192.168.1.10
>RP 3389
When I the start the Remote Desktop app under my Windows Mobile 6.1 it indicates connecting the fails as before.
Also forgot to mention freeSSHD is running on the desktop I want to connect to.
Sure thing.
When you run Remote Desktop under Windows Mobile, make sure you connect to "localhost" NOT to the IP of the desktop you want to connect to.
Your other settings seem correct to me.
To attempt to explain a little, basically what happens is as follows. For simplicity's sake I will have three machines, your phone, your SSH server and your RDP server (although the latter two can be the same).
On your phone:
1) Remote Desktop connects to localhost on port 3389.
2) zaTunnel is listening on localhost on port 3389. It echos all commands sent to this port out on port 22 over your cellular connection to your SSH server, also providing details of your RDP server and port.
On your SSH server:
3) FreeSSHd receives the commands sent over port 22 and is told by zaTunnel to convert them to commands sent to your RDP server using port 3389.
On your RDP server:
4) Remote Desktop receives a normal RDP request over the normal port from your SSH server.
5) Responses are sent to your SSH server.
On your SSH server:
6) FreeSSHd receives the RDP responses, and sends them back to your phone over port 22.
On your phone:
7) zaTunnel converts the commands sent over port 22 back into RDP commands sent over port 3389.
8) Remote desktop receives a response from zaTunnel and thinks it's connected directly to an RDP server on localhost. In actuality it's connected to your RDP server using an SSH tunnel provided by zaTunnel and FreeSSHd.
Hope this makes sense, I'm not very good at explaining this!
Ah found another problem. The IP of your desktop you say is 192.168.1.10 - this is a local IP address so will only work on your local network.
Go to a website like http://whatismyipaddress.com/ from the machine you run SSHd on to find out what your current "external" IP address is. Bear in mind that most home broadband connections have a "dynamic" address which is allocated to you and might change from time to time - you can always use something like http://www.dyndns.com/services/dns/dyndns/ to set yourself up with a static hostname, and run a program on your machine which updates your hostname with the correct IP address every time it changes. Some routers have this functionality built in.
Thanks for the quick response and explanation.
Between posting and reading your reply I had worked out the RDP app needs the localhost or the IP 127.0.0.1.
I had come back here to post, so others would know in future.
Your other point you raised about the desktop IP. I have used this only in the ports tab on zaTunnel. The connection tab has a proper mydomainname.com address. (Provides email and a webmail interface).
Anyway, can connect now and thank you again in solving this for me. (If your in Leeds I will buy you a beer).
Ah yeah the 192.* address would work on the ports tab, fair enough. Might be worth pointing out if others read this that this is only the case if the machine you're trying to RDP to is on the same local network (or the same machine) as the machine you have FreeSSHd running on.
But good to hear you got it working Now hopefully T-Mobile won't cotton-on and decide to block port 22 too...
I have been searching for clarity thru islands of info in the forums as well as the net. Any help directing me would be sweet. I am trying to use my T-Mobile Wing HTC WM6 to control a computer on my home network. I have somewhat knowledge of having the server and client. Have read and installed programs. I want to be at McDonalds *or any wifi spot and log in to home computer. When I have a VNC server running it says the network ip address of 192.168.1.101 but I assume thats because its thru my network. I have went to what is my ip address.com and tried that with the port the server allows in the vnc viewer and had no luck. I think I might be too newb for such an advanced concept. I am somewhat computer savvy to alot of technical terms. If anyone could help it would be greatly appreciated. I use messengers if faster communication is necessary. Thanks in advance to any help or thoughts.
homiedaclown said:
I have been searching for clarity thru islands of info in the forums as well as the net. Any help directing me would be sweet. I am trying to use my T-Mobile Wing HTC WM6 to control a computer on my home network. I have somewhat knowledge of having the server and client. Have read and installed programs. I want to be at McDonalds *or any wifi spot and log in to home computer. When I have a VNC server running it says the network ip address of 192.168.1.101 but I assume thats because its thru my network. I have went to what is my ip address.com and tried that with the port the server allows in the vnc viewer and had no luck. I think I might be too newb for such an advanced concept. I am somewhat computer savvy to alot of technical terms. If anyone could help it would be greatly appreciated. I use messengers if faster communication is necessary. Thanks in advance to any help or thoughts.
Click to expand...
Click to collapse
a few thoughts,
1. what version of windows are you running. (e.g Xp Home or vista )
as Vista home basic and premium will not accept a remote desktop connection without a 3rd party hack to make it work only business and ultimate support remote desktop
If on XP home be sure to set allowing of remote desktop sessions to be allowed under the system properties area.
2. do you have a password setup on the user account that you log into windows on if no remote desktop will not allow access.
3. when browsing from a 3rd party network ( e.g mcdonalds or over GPRS/HSDPA ) you browse to your external ip not the dark ip of 192.168.1.x i use dyndns.org so i can just browse to the dynamic domain ip which is my external ip of my home pc
4. since you mentioned a dark ip i can only also assume your using a router at home. this means you either use such as LogmeIn/Hamachi and browse to the home pc's Hamachi IP ( e.g 5.5.100.50 ) or you will have to set a port forward in your router to forward any requests from port 3389 to the local IP of the home pc, ( e.g 192.168.1.100 )
I use static ip's in my router at home to ensire that the port forward will always goto my home pc's internal ip address. My particular router from netgear allows to have the ip of a specific machine be assigned the same ip internally based on it's ethernet adapter MAC address. making no changes required on the pc itself other them standard DHCP.
hope this helps.
1. what version of windows are you running. (e.g Xp Home or vista )
as Vista home basic and premium will not accept a remote desktop connection without a 3rd party hack to make it work only business and ultimate support remote desktop
If on XP home be sure to set allowing of remote desktop sessions to be allowed under the system properties area.
1. I am using Windows XP Home. I have allowed Remote Access under the tab Systems Tab.
2. I only have a pw on the prog VNC server on the pc but no passwords for windows *should I? :| ... Then I try VNC Viewer the the Pocket PC *T-mobile Wing.
3. I am reading up on the dyndns.org site. I assume I need the free dns service for those with dynamic IP addresses. *i hope I have that.
4. I have Linksys Bef11s4... I believe I can set static ip's though its tricky for me. I am going to try for the pc I want to connect to. This networking stuff gets a little bit blurry for me. I understand that static means non-changing, therefore the pc to connect to in network will have same ip on restarts and things. I am familiar with the port forwarding options *do i need tcp and udp checked?... again any thoughts definately appreciated...
lastly, Do you have any particular progs you recommend for me to do this concept? I have a few installed, but not sure i need all.. I have pocketputty on pda and wm6 rdc... plus vncvier. On the PC i have VNC CLient and VNC Server *believe I only need server. Thank you for your time Cyberjak
1. Just go to http://www.logmein.com
2. Sign up. It's free.
3. Screw Remote Desktop and juggling internal vs. external IP addresses and DNS.
4. Use/enjoy...no work needed.
MJB
Logmein has like 6 choices... I am looking to remote access outside my network... also is this free? I see trials and stuff... thanks for help mjb
have the logme in installed on main and when i use pda it doesnt work...i installed cab and log in fine but when i go to remote the pc it takes my access code and then pops up with error message for menuPDA.html... i cleared history and cookies and tried to make sense of the forums... I am using the T-mobile Wing with WM6.... wierd... willing to try the other way if needed... i guess i could also try loggin thru a pc not home to the remote pc... i believe i saying this remote term correctly but i believe u understand. I am trying to use my PDA anywhere to control home pc.... thanks for help guys... i am willing to try whatever way works...
I've used Logmein on my MDA Pro, Ameo and now on my Vario 3.
You should first try to remote your PC while your sitting next to it. That way you can see any firewall pop ups that may be blocking you.
I have been trying when i am right next to it... I am using my WM6 to connect wi-fi to the internet thru my network.... the pc i wanna control is on my network...
It doesn't matter what network the PDA and PC are on. Logmein uses an internet connection.
yeah, tried a bunch of things to get logmein to work, and it always comes to the page of "403 Forbidden (0x5) menuPDA.html System error: Access is denied. (5)"
checked their forrums too...
guessing i should try going back to client/server manual entry... either way, any advice from you guys much appreciated.... It seems WM6 are known for incompatibility issues with RDC situations.... hoping not the case but...thanks again guys
got logmein working nicely, thank you for the help guys...
Gooer Remote Desktop Service
I am using Gooer Remote Desktop Service(http://www.gooer.com) and it let me access my home PC using laptop or mobile phone.
remote desktop only works, as far as I know, on XP pro & Vista
http://forum.xda-developers.com/showthread.php?t=357009
can anybody tell me how to setup remote desktop from HTC to my PC (I am using Windows 7)
Step by step please guys
http://www.youtube.com/watch?v=iCs4GQma7IQ
With that guide I made it work, good luck.
I did exactly everything in this guide and even set a corresponding exception in the Windows firewall (also tried with Windows firewall off) - but the mobile remote desktop program always tells me there was an internal error... But what the heck could that be?
Dont bother the remote dt program is ****e, im currently using vnc which is a bit better, but rather lacking also.
Is it me or did that video not mention setting up your windows machine to allow connections.
Make sure remote desktop is enabled on your PC and make sure it is allowing connections from computers running any version of Remote desktop(2nd option) third option works between windows 7 machines but wouldn't allow my phone to connect.
Your error sounds like it is being caused by something on the phone end though so i dont know if that will help.
Those with remote desktop working can you get it to go landscape? Mine works fine except i can't get landscape mode. Also anyone know of a app that can send wake up requests to a machine? I have this on my laptop so i can wake my pc over the internet and then log in. Anything similar out there for win mobile?
allowing a connection through windows firewall alone is not helping, if you have other system securtiy programs that also has a firewall. or maybe your router has a firewall too. you should try and forward the right port (3389) in the software of your router.
I opened port 3389 on the router, I activated the correct remote desktop option on the PC (Vista), the IP is right (wrong IP adress throws a different error, so the program gets that far)...
I guess you have Windows 7 Home version
Have you tried using 16 bit high colour option? Mine said it couldn't connect when i turned it down to 256 colours.
Edit: Windows 7 x64 btw
OK on my windows7 x64 ive turned on remote desktop and set it to allow connections (2nd option) and i still cant connect, what do i type in user/pass on the hd2
-ive setup the portforwarding on my bethere box
-tryed both color modes on hd2
does it have to be over wifi or can it be over 3g?
Your user name and password for windows.
You MUST have a password set up on your windows account to be able to use remote desktop. If you don't have a password set up remote desktop and other network related access will not work. I.e using the phone to access shared windows folders.
bzdemes said:
Your user name and password for windows.
You MUST have a password set up on your windows account to be able to use remote desktop. If you don't have a password set up remote desktop and other network related access will not work. I.e using the phone to access shared windows folders.
Click to expand...
Click to collapse
ok ive added a password to my pc but still wont work, i think i tmay be something todo with this steps
2. Open a web browser, and type 192.168.1.1 to access your router. If you don't know the default username and password (usually admin/password), Google for it.
3. Enter port forwarding. Add a new entry using your local IP address, and the start/end port of 3389.
Click to expand...
Click to collapse
my router is a THOMSON TG585v7 and to log into it i need to type http://192.168.1.254 so i did and the only thing like port forwarding i can find is the Toolbox\Game & Application Sharing menu and in their i can type the ports but cant type the local IP address as their no where to add it, ive added a pic that might help you help me
If you are accessing the machine via your wifi(i.e your own network) you should be able to do it without any port forwarding.
So punch in your machines local IP and your username and password. That should work(make sure it is using your WiFi and not still connecting via 3G). If you wanted to be able to do it via 3G/wifi(external network) then you will need to get port forwarding working.
Edit: Port forwarding guide for you. I think this is roughly the same version of router you have just different branding.
http://www.portforward.com/english/...mson-Alcatel/SpeedTouch585/Remote_Desktop.htm
bzdemes said:
If you are accessing the machine via your wifi(i.e your own network) you should be able to do it without any port forwarding.
So punch in your machines local IP and your username and password. That should work(make sure it is using your WiFi and not still connecting via 3G). If you wanted to be able to do it via 3G/wifi(external network) then you will need to get port forwarding working.
Edit: Port forwarding guide for you. I think this is roughly the same version of router you have just different branding.
http://www.portforward.com/english/...mson-Alcatel/SpeedTouch585/Remote_Desktop.htm
Click to expand...
Click to collapse
so in the last part of the setup i need to manually define it as the local ip, still not working if that's what i should do
The last step is applying the forwarding to your PC. So you should be able to pick your PCs name in the drop down box.
Have you tried just doing it over your local wireless network(forget about port forwarding for a minute.) Enter the local IP(could also just try entering the name of the PC though im not sure if that works) of your PC as the computer then your user name and password.
can anyone give me a step by step guide on how to configure the remote desktop? btw i am using windows 7
On the Phone in Remote desktop mobile :-
In the box Computer put your pc's IP address
In the box User put the pc's users registered name (not the computers name) ie the name you use when you log on to your pc guest user etc.
In the box password put in your pc login password
In the box Domain put the full computer name found under my computer properties.
On your pc under my computer properties - remote - tick allow remote access
You should be ok to go - make sure your phone has a data/internet setting enabled and is active.
r
Andrew
Oh and don't forget to adjust your firewall settings to allow your HD access
bigdish said:
On the Phone in Remote desktop mobile :-
In the box Computer put your pc's IP address
In the box User put the pc's users registered name (not the computers name) ie the name you use when you log on to your pc guest user etc.
In the box password put in your pc login password
In the box Domain put the full computer name found under my computer properties.
On your pc under my computer properties - remote - tick allow remote access
You should be ok to go - make sure your phone has a data/internet setting enabled and is active.
r
Andrew
Oh and don't forget to adjust your firewall settings to allow your HD access
Click to expand...
Click to collapse
thank you very much, it funny how you give the simplest instructions and it all works in one go and the rest are so complicated etc haha thanks man
ah there always has to be a problem, 1) i cant see the keyboard even witout full screen. 2) when i try to login i get an error "Logon failure: user account restriction. Possible reasons are blank passwords not allowed. Logon hour restrictions, or a policy restriction has been enforced" HELP!!
I had the keyboard problem too.
I use finger keyboard and in the display option of Remote Desktop I ticked "Fit to remote desktop" Be careful it allows you to tick the other box as well.
Also colours = High Color.
As to the other messages it must be a Windows 7 issue of more parameters having to be entered.Also I log off on my pc before I connect.
Hope this helps
r
Andrew
bigdish said:
I had the keyboard problem too.
I use finger keyboard and in the display option of Remote Desktop I ticked "Fit to remote desktop" Be careful it allows you to tick the other box as well.
Also colours = High Color.
As to the other messages it must be a Windows 7 issue of more parameters having to be entered.Also I log off on my pc before I connect.
Hope this helps
r
Andrew
Click to expand...
Click to collapse
thank you, it worked
im on windows 7 and i di everything stated above, even disabled my firewall, but it still wont connect!! grrr, any more tips!
hi followed the guide exact and im stuck at the log in, i put the right pastword in and it keeps saying wrong password. Im running windows 7 ultimate any advice
thnx bro it works perfect in win 7 ultimate!!!
It works
It works just as stated! It seems the full computer name that is entered in the domain section is entered without spaces. after doing it like this it works with even gprs/edge. Thanks to bigdish!
I require some assistance here. My PC connects to the Internet through a router (Siemens SE572) and I had to set up a static IP and now trying to configure the port forwarding feature on my router (UDP, 3389). I'm not sure I'm doing it correctly. Any ideas?
hi still not able to to get past my login. all my details are entered exact once its connects it goes to my pc's login page and thats as far as i get just will not let me log in. Anyone having the same problem.
Im using windows 7 ultimate
Avg 9 antivirus/firewall
Bt home hub
guys plz give me some help.
i do all the above but i get an error message.
"the computer is not set for remote access".etc
i put my ip on computer but i think u have to open a port,so i write for exaple: 192.165.1.2:1411 (?). i also tryed without the port and also with my local ip.
user: ??? (i m the admin) so i put the name the windows asked me.
pass: i got no pass so i leave it blank?
domain: i put the computer name.
i also did the settings on the pc mentioned above and turned the firewall off.
any ideas???
port forwarding
User X said:
I require some assistance here. My PC connects to the Internet through a router (Siemens SE572) and I had to set up a static IP and now trying to configure the port forwarding feature on my router (UDP, 3389). I'm not sure I'm doing it correctly. Any ideas?
Click to expand...
Click to collapse
.................
you must have password, thats why u cannot conne`t
Ive searched and found and searched again and again an again. Im using Vista Home Premium and want to enable Remote Desktop (RD). The first thing I found ofcourse was the not present RD service of Vista HP. I installed the on the internet circulating .bat for Vista HP.
Okay the steps I took:
1. Download and install: Premium.bat from the .zip
2. Enable RD in computer -> properties
2. Open poort 3389 and set it TCP
3. Restarted both HD and laptop
4. Wifi enabled on my HD
5. Started RD: Filled in the following IP in Computername:
\192.168.1.XXX OR \86.92.85.XXX
Dunno which one to use? Local? First is from my Acces Point/Router second is the overall IP, but what do I use?
6. Account: My account on my laptop
7. Password: Password of my account
8. Domain: Dont have one, so blank
Still EVERYTIME I get the error something is wrong and it wont connect. Someone got an answer? I downloaded Remote Touch but it didnt work either.
There was a .reg for premium called TRonPremium.reg but did not apply it yet, dunno what it does and it is a .reg
Please could someone help me cause this is pretty useful for me!
The remote desktop service is enabled by default in vista. No idea why you have needed to install anything extra to get it working. Sounds dodgy to me. Anyways you use the local network ip address, not the external address, and you don't need to open any ports (although on mine I didn't have a firewall enabled on the machine I was accessing, the firewall was on my router). You do need to put in a username and password for the machine you are accessing though. Doesn't need a domain name, as you say, it can be blank.
I'd say the troubles you are having are to do with the dodgy reg and bat files you have downloaded. You shouldnt need anything other than a bog standard vista install to use RD, no matter what version of Vista you have. You may have a service disabled that is required too. If you have disabled any of these previously you may need to have another look at them and re-assess.
reg files add information to registry. If you are unsure you should NEVER add these without knowing exactly what they do. Can be very harmful to your pc. If in doubt, always leave them alone.
Hello
I use UltraVNC on vista,
And .NET VNC Viewer on ppc,
Both free and running without any problem from ppc or any other pc
When I was searching the internet I found multiple website claiming Vista Home Premium does not support the full RD. To solve this according to a few websites, you could install the .bat made to add the correct service. I even found this on XDA threads. How do you re-do a .bat file? Dont know how to work with it.
The .reg im leaving alone, .regs are evil for PCs imo!
Will try it out today, with what you just told me. If it does not work, Ill try the VNC and VNC client, though I heard it was slugish and the connections fails very quick.
Thank! If you still got tips/tricks, be sure to leave them
Ok well my 64bit version of vista home premium had it all enabled so I assumed they all did. Maybe you're using the 32bit one. Seems loads of stuff was disabled in that.
I tried the various VNC programs but gave up with those because the connection kept timing out, and it had more options than was neccessary. I'd say VNC was best if you wanted to connect via the internet, but RD is best for home use.
Good luck with yours I'm sure you'll get it working.