I have hspl bepe on hd2 and dutty's rom.
Is there any tutorial how to go back on stock spl du to warranty reasons, like it was on blackstone?
Thanx
carlowise said:
I have hspl bepe on hd2 and dutty's rom.
Is there any tutorial how to go back on stock spl du to warranty reasons, like it was on blackstone?
Thanx
Click to expand...
Click to collapse
If you had searched you would have found that: http://forum.xda-developers.com/showthread.php?t=611433
4) Uninstallation
Only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
I have flashed original rom via pc and it didn't worked i didn't know it should be from sd card.
Thanx
Related
i sent my hd2 off for repair through t-mobile uk but hard spl had been instaled how do i get my device back to default spl so i can send it back and get it fixed under warinty i only updated hard spl no radio or rom updates just hard spl please help.
Only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
where do i get the default one from for the hd2 for t-mobile uk and is there a app like there is to install hard spl where you just do it on your pc.
i need to remove hard spl i need help where to i hed the stock spl from and is there a way to do it on the pc as been told not good to do it through a memory card.
forget sd card, that's the old way.
get and run hspl2,
choose 1.42.0000
done.
Friends,
After flashing my HSPL and my ROMS so many times, I have suddenly gone blank.
If I need to flash my phone back to it's original state, and if I do not have my original ROM, what do I do?
Currently it's booting up with a picture of an Android and a Bird ( I forgot what I flashed to get that! )
I purchased this phone in Singapore.
Any assistance will be much appreciated!
Ben
Taken from: http://forum.xda-developers.com/showthread.php?t=609477
To Remove HardSPL from your Device or Flash back a Stock Rom and Stock SPL for Warranty Purposes
You can remove the HSPL by flashing an original SPL from microSD card OR by running the HSPL3 application (You need select 2.08.0000 in the choose screen).
* You can also use the microSD Card method to flash back your Stock Rom and Stock SPL that you originally had on your phone*
- Download a shipped Rom from *HERE*
- Rename the extension to .zip
- open it with winzip and extract the RUU_signed.nbh file to a folder
- Rename it to LEOIMG.nbh and copy it to the root of a microSD card thats been formatted to FAT32
- Insert your storage card into your phone
- Enter Bootloader and follow onscreen instructions to flash
Thanks for the insight. Really forgot even what the process was called and couldn't do a read up I normally would. Appreciate your help Polo!
polo735 said:
Taken from: http://forum.xda-developers.com/showthread.php?t=609477
To Remove HardSPL from your Device or Flash back a Stock Rom and Stock SPL for Warranty Purposes
You can remove the HSPL by flashing an original SPL from microSD card OR by running the HSPL3 application (You need select 2.08.0000 in the choose screen).
* You can also use the microSD Card method to flash back your Stock Rom and Stock SPL that you originally had on your phone*
- Download a shipped Rom from *HERE*
- Rename the extension to .zip
- open it with winzip and extract the RUU_signed.nbh file to a folder
- Rename it to LEOIMG.nbh and copy it to the root of a microSD card thats been formatted to FAT32
- Insert your storage card into your phone
- Enter Bootloader and follow onscreen instructions to flash
Click to expand...
Click to collapse
As the title suggests I have SPL 3.03 on my HD2, so without being able to put HSPL on, will I ever be able to get NAND?
Regards Jamie R
As far as i know u can't.
You have to downgrade the SPL-Version with an earlier Stock-ROM and Install the right HSPL.
Here you can find some stock builds. Choose a 1.66 or 1.72 rom and don't forget to flash the newest Radio. For example this one.
Yes you can, you just have to downgrade the SPL to 1.xx or 2.xx
Download HTC HD2 Official ROM from HTC's website. Do not use 3.xx, try to find something that is 2.xx or 1.xx instead.
Extract from the EXE file using 7-zip, the RUU_signed.nbh file.
Rename the file to leoimg.nbh and copy this file to your MicroSD card's root directory. After that, power down your device, and then hold onto the Volume Down button, and power up the device. The bootloader will detect the leoimg.nbh file and recover from it, downgrading the SPL as well.
After that, you upgrade the RADIO to 2.15.50, then you can update the SPL to HSPL 2.08
How about the requirement for a radio that supports the 576MB RAM?? How do I know which radio actually supports the 576mb ram instead of the 448MB RAM??
And another one: Will I remove the hspl, when I extract the RUU_signed.nbh from a stock ROM, rename it and flash from SD card? SD card has to be 2GB, right??
Thanks!!
Yes, it will remove HSPL if you have HSPL on, however, this method I am recommending it because some people have SPL 3.03 which you cannot install HSPL 2.08 on, and have to wait for HSPL 3.03
Your MicroSD card has to be 512MB or more.
To extract the RUU_signed.nbh file, I use 7-zip. I just right click the EXE file, select 7-zip on the tab, then extract or open the whole file.
I am ready to FLASH HARDSPL on my hd2 but want to backup files in the event I have to flash an original SPL on my phone for warranty issues. DFT states:
"make sure that you uninstall HSPL before sending phone for any warranty issues and they also write in their directions:
“The only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh".
Can someone please help me back up the needed files? I don’t totally understand the instructions and any help would be appreciated.
imglknight said:
I am ready to FLASH HARDSPL on my hd2 but want to backup files in the event I have to flash an original SPL on my phone for warranty issues. DFT states:
"make sure that you uninstall HSPL before sending phone for any warranty issues and they also write in their directions:
“The only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh".
Can someone please help me back up the needed files? I don’t totally understand the instructions and any help would be appreciated.
Click to expand...
Click to collapse
Hi,
You dont need to backup any files. Only way to revert back to original SPL is flash stock rom from your sdcard. By stock rom I mean rom that came preinstalled on your device. Search and read please, everything is on the forum. Try here:
http://forum.xda-developers.com/showthread.php?t=915628
I hope that helps.
Can you change the HTC HD2 radio using your SD card only?
Like how you can re install your rom by renaming the "RUU_Signed.nbh" into "leoimg.nbh" and putting that on your SD card, But I wanted to know if you can change radio with SD card?
I tried getting the "RUU_Signed.nbh" from a radio and renaming it into "leoimg.nbh" but bootloader just stays at "Loading"
Thanks
Well from my knowledge of the HD2 what you are wanting to do should be possible. The "The HTC HD2 Master Radio Thread" says.......
Installing:
For installing a RADIO ROM you need HardSPL installed to your device.
Click to expand...
Click to collapse
So if you have not flashed HSPL to your HD2 then you need to flash HSPL then try to reflash the Radio.
But from your post I take it you must have a reason for wanting to flash a radio via SD card. (Mini USB port not working?) To flash HSPL you have to flash it via USB, So you might be out of luck depending on your circumstances.
My usb port works fine, I just find it much easier doing it from the actual phone rather than having to open the program, waiting for it to connect...etc.
So if I have HSPL I can flash radio's using my SD card?
Nilesh1 said:
My usb port works fine, I just find it much easier doing it from the actual phone rather than having to open the program, waiting for it to connect...etc.
So if I have HSPL I can flash radio's using my SD card?
Click to expand...
Click to collapse
Look I will be totally honest I have never flashed a radio via SD card. But from what I know about the HD2, you should be able to flash a radio if you have HSPL. The only thing that I know reverts HSPL to SPL when flashing via SD card is a stock ROM. I know you can flash cLK, MAGLDR, and custom Win Mo ROMs via SD card when you have HSPL installed. So this should hold true for a radio version as well.
T-Macgnolia said:
Look I will be totally honest I have never flashed a radio via SD card. But from what I know about the HD2, you should be able to flash a radio if you have HSPL. The only thing that I know reverts HSPL to SPL when flashing via SD card is a stock ROM. I know you can flash cLK, MAGLDR, and custom Win Mo ROMs via SD card when you have HSPL installed. So this should hold true for a radio version as well.
Click to expand...
Click to collapse
Thanks, any idea on what to rename it as? or should "leoimg" do?
Nilesh1 said:
Thanks, any idea on what to rename it as? or should "leoimg" do?
Click to expand...
Click to collapse
LEOIMG.nbh or leoimg.nbh will work, but it has to be leoimg as far as the wording because the HD2 will not detect any other file name.