Hello all,
I tried to CID unlocked my German T-Mobile MDA Compact II.
I followed this instructions: -->
http://forum.xda-developers.com/showthread.php?t=285435
I downgrade the ROM to the Button 1.05.
The screen displayed 100 % and on the PC a successfully message appeared.
Then the MDA turns off.
Now I am not able to start the MDA.
It is always black.
I tried Softreset
Hardreset (Soft-Resest + Hardreset)
But it is always black.
Any Chance for me and my MDA?
Thanks in advance.
Information before downgrading:
IPL: 3.08
SPL: 3.08.0000
GSM: 02.63.21
OS: 3.8.2.22
So no G4 device.
Please post a URL to the exact ROM you used.
I want to compare something, to see if your case can be solved with a blind BOOTLOADER.
Have you got a Charmer or a Wizzard. When you have a Charmer: Soory guy your Phone is dead. If there are realy no parts of the old bootloader, there won't be any way exept rewriting eprom out of the box.
Ah OK I see. I made the mistake.
I installed this ROM
http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
So it was for the Wizard
My MDA COMPACT II (is) was a Charmer.
Good Bye my friend.
So ein Mist.
NO/Keine Chance?
Maybe you can flash a bootloader over SD. I'll look how to do when i've time. Or you have to rewrite the eprom external. I'll look it the HTC Service Manual how to do and tell you tomorow.
Hope we can bring it back to live.
Weiteres weiß ich wohl morgen.
Grüße
ChrBeck
Oh that sounds wonderful because i want to try your rom.
thanks in advance
(Super das wäre echt nett von Dir. Ich wollte doch Dein ROM noch testen.
Vielen Dank im Voraus)
Greets
Martin
ChrBeck said:
Maybe you can flash a bootloader over SD.
ChrBeck
Click to expand...
Click to collapse
I use MITTY.exe to write a clean ROM to SD (using the "r2sd all" command).
I'm trying to get PSD read, and NTRW.exe, to save it in a format tha I can upload it to the other users here.
Well Nokia 3650,
we don't need the rom but the bootloader. I also know this method, but it doesn't write the bootloader to SD. And to use this method you need a working bootloader to start writing the rom. In the service manual there is something said about rewriting the eprom out of the device, but I can't do cause the equipment is to expensive for a student like me. I'll look on what to do. And I'll look for writing a hardSPL. This could prevent much of this problems in the future.
@ ablaze:
Press camera and reset. (Stay pressing camera till something happens). What happens? Does it stay black or are there any colors or a text? If there are colors or a text we'll be able to make your system living again.
Hoffe ich finde eine Lösung
ChrBeck
stay black.
Is your battery charged? Take a Voltmeter and test the battery.
ChrBeck said:
Is your battery charged?
Click to expand...
Click to collapse
The battery, is fully charged in another phone.
A voltmeter, can't tell you the true voltage 3.7-4.2V
It only shows an output of about 0.6V (due to the internal 'balancing' of the protective circuit inside).
OK, I think your phone is dead then. Does it show something when you press Camera and Voicedial and reset (Hardreset)? If not there are 2 posibilities:
1) The Power conector is damaged.
2) The bootloader is completly ereased. This means there is no chance for your device.
Ich kann sonst leider nichts sagen.
Hoffe nicht das es das 2. ist.
Gruß
ChrBeck
ChrBeck said:
Does it show something when you press Camera and Voicedial and reset (Hardreset)?
Click to expand...
Click to collapse
Yes, the phone will go into BOOTLOADER moode and do a hard reset with no problems. The problem is that the unit 'turns off' after showing the initial splash screen for a few seconds.
I'll find an alternate method for flashing with your ROM in a few hours.
I meant ablaze with the last 2 posts. For you it's something else. I'll try to make a SD Backup of my ROM and upload it for you (But this can take one week).
Thanks
I'm very much wiling to wait.
MDA compact cannot be flashed
Hallo!
Did you solve the problem? It seems that I have a similar problem!
My PDA goes into bootloader (colored diyplay) but when I try to flash the rom it shows me always vender Id failure or verkäufer id fehler for the original T-mobile 2.0 and 3.3 rom! What can I do?? My PDA doesnt turn to the rom rom where I can connect over mobilysync!
Please Help me, its the mda of my sister and she will kill me!
THANKS a lot!
Your case is an easy one where you should use a 'stock' RUU from www.clubimate.com with the stock drivers. In bootloader mode, it'll work for you. Just ensure your battery is charged in another unit first.
My problem was a hardware/firmware related one.
Hi
I have a very similar issue after flashing back to the stock rom following installing the 6.1 rom mentioned. When I reset soft or hard all I get is the coloured SPL bootloader screen.
I cannot complete a flash of the stock rom as it produces an update error (302) at 80% of the flash process.
Needless to say, I cannot flash with the upgrade_rom.bat either to try that as it will not boot into windows mobile.
Hope someone can help.
Chris
lawrencenetwork said:
Hi
I have a very similar issue after flashing back to the stock rom following installing the 6.1 rom mentioned. When I reset soft or hard all I get is the coloured SPL bootloader screen.
I cannot complete a flash of the stock rom as it produces an update error (302) at 80% of the flash process.
Needless to say, I cannot flash with the upgrade_rom.bat either to try that as it will not boot into windows mobile.
Hope someone can help.
Chris
Click to expand...
Click to collapse
Now up and running thanks to the rescue kit (which seemed to hang at 80% and then at 95%, but it finally got there and my charmer's back to life!)
http://forum.xda-developers.com/showthread.php?t=471490&highlight=rescue+kit
Hi!
I have a Tytn and since yesterday the camera seems to be week.
I took a few pictures. in the evening i wantet to start the camera soft by pressing the button. An Error occured. something like: Camera not initialiesd. Software cannot be started...
I´m from germany, the error was in German....
So i shuted down the device and started new. nothing happened by pressing the button or starting the sofware.
No Error message - nothing.
Camera won´t work.
What can i do?
I don´t want to do a HardReset.
But if there is no other way, How must i do that?
Is there a Sotware Update available?
On HTC´s Homepage there is no TYTN listed.
Which one do i need, and what is to do to Update the Sotware?
THX
Antworten gerne auch in Deutsch ;-)
I don't know where to go, I have flashed several phones before, but I'm scared that my phone died on me
So, I had a perfect working HTC HD2 with the Nexus HD2 Rom.
Cotulla 2.08 HSPL, perfectly working MAGLDR 1.13 and working CMW wich I used to install the NExus HD2 Rom.
My screen was cracked and black screen, so I took it to the repair guy. He said; 'No Problem, I don't repair it, I'll send it to an HTC Centre and they only replace the screen, they don't replace your OS! It's no problem!'
So now I get my phone back, with the Boot Screen stuck on 'Go Go Go'.
It has stayed like that for 10 minutes. It won't boot. I've reflashed it using the Hyperdroid Tutorial ( http://www.youtube.com/watch?v=71WDYfDg4sA&feature=player_embedded#!)
I can get into Cotulla and got to number 8, but if I push the Home Button, I won't go into CWM.
I've went back, but they guy said: 'Everyone who brings me a broken HD2, has installed Android. Andriod on HD2 causes the phone to brick!'
Can you F***ing believe that?
They had no right to remove my software, especially after I requested it!
Anyway, what could be the problem? I'm really scared that I've paid 110EU (142USD) for a unusable phone.
Greetings,
Roy KW
Btw, have I put the topic in the good subforum?
That repair man is talking rubbish.
I suspect you need to restart and flash from new.
Since magldr is starting that means radio and hspl are fine, so start from..
Magldr - USB flasher
Install cwm and partition layout
In cwm do a "wipe data factory reset" to clear remnants of the old rom from SD card
Flash rom.
Hi Roy,
I think that samsamuel advice should work, but if not, you can just flash official WM ROM directly from SD. You will need micro SD card (capacity less then 4GB, the best is the 2GB originally attached).
And follow this guide: http://www.jayceooi.com/2011/08/15/how-to-restore-stock-rom-on-htc-hd2-video/
It is the best way to get fully working phone (do not forget to check every functionality (all buttons, light and proximity sensors, gps, cam, mic and speakers etc.)).
It is normal that something is broken after lcd replacement. My experience ..
I am not sure about this and hope that someone can confirm it, so im not the person who causes your phone to brick entirely. But what might fix it is:
- Do a wipe (task29) . You can use the HD2 toolkit to do this or download the task29.exe thingy.
- Reinstall MagLDR
- Re-flash CWM Recovery
- Install the rom again.
This should work if u have the correct HSPL and Radio installed, but if u say it starts into MagLDR i assume you already have that.
Again, im not sure if this should fix it and waiting for someone to confirm or deny it so it wont destroy your phone .
Oh and those repair guys are annoying. Mine had to go once and came back with SPL 3.03, when that wasn't supported by HSPL yet. Had to wait a month or something before i could install Android again
I'm going back to stock rom, to check if everything is working.
One thing is already in a worser condition, then I left it at the repair guy. I noticed that the Volume Up bottum doesn't click as nice as it used too.
Ugh. I hate this!
ARGHH. I can't flash NAND Andriod, nor can I flash WinMo. I am no noob at this. I've flashed several phones and I am really stuck on this. I am going to try it agian in the evening, I'm too angry( and because of that, unfocused) now.
Roy KW said:
I'm going back to stock rom, to check if everything is working.
One thing is already in a worser condition, then I left it at the repair guy. I noticed that the Volume Up bottum doesn't click as nice as it used too.
Ugh. I hate this!
Click to expand...
Click to collapse
happens a lot
Roy KW said:
ARGHH. I can't flash NAND Andriod, nor can I flash WinMo. I am no noob at this. I've flashed several phones and I am really stuck on this. I am going to try it agian in the evening, I'm too angry( and because of that, unfocused) now.
Click to expand...
Click to collapse
without details of teh problem, that's just a rant, not a request for help
My HD2 Volume Up buttons do not work, after the screen get repaired.
Is it possible to install a NAND Android without this buttons?
You can go ebay. thank you.
nik-ii said:
My HD2 Volume Up buttons do not work, after the screen get repaired.
Is it possible to install a NAND Android without this buttons?
Click to expand...
Click to collapse
If both VolUp and VolDown buttons are broken: No, it is not .. there is no other way than new flex cable. And it is not cheap http://www.amazon.com/dp/B005WVZ8QI?tag=ree04-20
// EDIT: If it is broken only Volume Up, you can install a NAND Android without any problem. I am in the same situation (broken volUp).
// EDIT: The only one problem for me is that I am unable to install Windows Phone 7 without VolUp ..
The flexcable is broken.
The Rom is a 2010 6.5 WM to boot Android from SD. It should be possible to use this for a new SD Rom, right?
samsamuel said:
happens a lot
without details of teh problem, that's just a rant, not a request for help
Click to expand...
Click to collapse
I know
I am going to take a shower and within an hour I will update you guys
Update:
TS here I've taken my time to fully examine my HTC and update you guys...
The Leo issues:
My HTC HD2 looks good. It has been repaired well, but there are some things broken after the repair.
- The Volume-Up Button is not broken, but I remember it being much nicer to push. It needed a gentle push, now I need to push it with strenght.
- Same problem as above with the SD. When I push it in, I can't gently take it out, I need to use force.
- One Screw is missing. The HTC is screwed to the housing with 3 screws, not 4.
Magldr 1.13 issues:
- I have reflashed HSPL, Magldr, and used Dark Forces Andriod Flasher to install CWM.
- I have reflashed CWM succesfull yesterday, but today I get the next error:
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
Click to expand...
Click to collapse
- When I go to 8. AD Boot Recovery in Magldr1.13, the home button does not seem to work. The Home button is required to boot CWM.
- The flashing of the .nbh stock rom file as advised by cubexe does not work. The process won't go into loading.
I'm stuck.
Please help me.
I'm so close to calling my lawyer.
The repair guy assured me that they would only repair my screen and not tinker with the software. He has already said to me: 'The people at the repair centre we're not happy that you put Andriod on it' So that really makes me think if they tried to put an updated stock rom on it.
Update; I am pretty sure my Home button is broken too. Is there any other way too boot into CWM? I can push the Phone Button, but after that it gets stuck at Go Go Go.
As far as I'm concerned, if you've requested a repair for your screen, and they've done that but in turn f**ked up everything else (bet you can't guess what those asterisks represent ) then you have every right to complain about it to whoever repaired it and get it redone/get a new one sent to you.
Also, since when has the home button been needed for CWM? This is the first I've heard about it
I'm with you. I am going back first thing in the morning. I don't care about the phone anymore. They can have it. I just want my money back so I can buy a new one.
Can someone confirm to me if the Home Button is needed to boot CWM?
Can someone confirm to me if the Home Button is needed to boot CWM?[/QUOTE]
No need Home Button. Only Vol. Up, Vol. Down, and Send.
Stock rom is running agian.
This is what I did:
1. Put USB in Telephone.
2. Go to red/blue/green flash screen using Volume Down.
3. Flashed using official HTC Rom Updater on PC.
4. Restart Device.
I have however, been scammed.
Remember those 'touchscreen-lines' that run diagonal on your touchscreen if you watch very closely?
They are not present on my device.
This is fishy.
Review on google:
Nadat mijn iphone beeldscherm in stukken lag op 8 november heb ik deze laten repareren bij Ramin Telecom heerlen. Na 3 keer was er eindelijk iemand die mijn gsm kon maken, dacht ik. Na reparatie van scherm en batterij vervanging bleek dat de batterij het niet deed. De Iphone deed niks meer. Nu 6 weken verdere doet een gedeelte van het touch screen niks meer. Volgens de baas had ik maar pech. en garantie was bij hun geen spraken. Hierbij wil ik iedereen waarschuwen om hier niks te laten maken. Oplichters €110 euro lichter en een kapotte GSM rijker
Click to expand...
Click to collapse
Wich is Dutch for:
After my iPhone screen was lying in pieces on November 8, I have it repaired by Ramin Telecom Heerlen. After 3 times, there was finally someone who could make my phone, I thought. After repair of screen and battery replacement was found that the battery was not working. The iPhone did nothing. Now six weeks doing a further portion of the touch screen nothing more. According to the boss that I had bad luck. And their warranty was no part ofof the deal. I would like to warn everyone here to do nothing. They are Fraudsters €110 euros lighter and a broken cell richer
Click to expand...
Click to collapse
Damn, really wished I've went to Vodafone. They are expensive, but at least they are honest.
sorry for my poor english, i have a big prob im guesing!
I bought my HD2 in the age we all used stock WM6.5
After a while we succeed to boot SD Android
Then we even succed to Boot android from Nand.
I boot 1,5 year Android from nand perfectly. But since yesterday i got te follow problems.
I can't turn my phone on lockscreen (have to wait to autolock..) But i can awake my phone normally :S
I cant go in to Bootloader by pressing volume - + Pwr Button
Can't install a new rom cuz when i choose option 8. AD RECOVERY it hangs after "go go go"
And booting in normal androids it hangs for a really long time, takes about 30minutes to boot!
pls help me, im desprate! Tormorrow it's Q-day here, cant go witouth mobile one guys
-----UPDATE-----
WHEN I TRY TO GO TO LOCKSCREEN, I GET FOR CHOOSE SHUTDOWN FLIGHTMODE OR PROFILE..
And when i try to go in Bootloader it start Magldr..
So I was guessing. Is my powerbutton broke ? I mean when i push it ones, it seems it reacts like i hold it down. starting magldr and when i try lockscreen it goes to CHOOSE SHUTDOWN FLIGHTMODE OR PROFILE..
My digitizer is fixed a half year ago! I have some warranty but i don't know if HTC is happy with a Android flashed Phone. (When i sended back a half year i ago, i flashed it first back to WM6.5)
So is the hardware (digitzer broke) or software ? If its hardware, htc can fix it perhaps?
sorry for my poor english, i have a big prob im guesing!
I bought my HD2 in the age we all used stock WM6.5
After a while we succeed to boot SD Android
Then we even succed to Boot android from Nand.
I boot 1,5 year Android from nand perfectly. But since yesterday i got te follow problems.
I can't turn my phone on lockscreen (have to wait to autolock..) But i can awake my phone normally :S
I cant go in to Bootloader by pressing volume - + Pwr Button
Can't install a new rom cuz when i choose option 8. AD RECOVERY it hangs after "go go go"
And booting in normal androids it hangs for a really long time, takes about 30minutes to boot!
pls help me, im desprate! Tormorrow it's Q-day here, cant go witouth mobile one guys
-----UPDATE-----
WHEN I TRY TO GO TO LOCKSCREEN, I GET FOR CHOOSE SHUTDOWN FLIGHTMODE OR PROFILE..
And when i try to go in Bootloader it start Magldr..
So I was guessing. Is my powerbutton broke ? I mean when i push it ones, it seems it reacts like i hold it down. starting magldr and when i try lockscreen it goes to CHOOSE SHUTDOWN FLIGHTMODE OR PROFILE..
My digitizer is fixed a half year ago! I have some warranty but i don't know if HTC is happy with a Android flashed Phone. (When i sended back a half year i ago, i flashed it first back to WM6.5)
So is the hardware (digitzer broke) or software ? If its hardware, htc can fix it perhaps?