hi, have a big problem, i was install software wich name i magic radio tuning on my mda compact(qtek s100). When i was winish with proces my mda is bloked! I was traing everything, soft reset, hard reset, i was poot him one day without baterry but nothing.eckran of mda is black and writes SERIAL v1.1 please help what I must to do? my mda is dead?! please help......tnks
What does the screen exactly show? is it black, or does it display an error??
Don't really understand what you mean - how about flashing new rom?
(Wenn dein Deutsch besser ist, schreib mir eine PM)
reich said:
hi, have a big problem, i was install software wich name i magic radio tuning on my mda compact(qtek s100). When i was winish with proces my mda is bloked! I was traing everything, soft reset, hard reset, i was poot him one day without baterry but nothing.eckran of mda is black and writes SERIAL v1.1 please help what I must to do? my mda is dead?! please help......tnks
Click to expand...
Click to collapse
Your phone is stuck in bootloader mode. Do you have an .nb1 backup of your ROM? You could use that to reflash the phone.
after the charmer rebooted, there is a white screeen on it. i did hard reset but i did not help me. i got the battery out too but no no.
please help me.
Try entering bootloader mode and flashing the rom once more.
bootloader
yes i did it but couldnt be successful
i doesnt
Bootloader mode:
[Record] or + [Power] + [Soft reset]
[camera]
screen is always white and is not connected with activesynce.
thanks
call to your phone see if unit is working
when i call the charmer i hear the mail box .
it is not connected to pc too.
i dont know why i cannot be succees bootloader
now i can bootloader mode,
i did it but got this error while i upgrade my rom to newest rom 3.3...
it means in english : please check your NBF data, this NBF data cannot be used for your PDA Phone.
and if i want to install the rom version of compactII_AKU2.0_05-2006 i get such as error error 296 :this NBF file cannot be used for your PDA phone.please get newer NBF file.
what does it mean boys...
please help....
You probably have the 3.xx bootloader, find the german AKU 3.3 and flash it.
yes i found it
if i want to install the newest rom also ger.3.3 i get such as error what there write on jpeg at attachment mean in english
"please check your NBF data, this NBF data cannot be used for your PDA Phone".
Try some prophet rom with noid RUU.
where i can get it from.
please give the link.
thanks.
sorry, I'm sick and tired of providing everything for everyone. Go to prophet section and find a wm5 rom.
<salute vlodeck!>
danke an alle
thanks friends espacially vlodeck
my problem is solved.
use this link to solve it
http://forum.xda-developers.com/showthread.php?t=301323&page=2
Hey people,
I have got on nice MDA with ipl and spl 2.21.0001
me problem is i have no idea wath did happend to it.
the MDA starts up shows T-Mobile ... an go to the Bootloaderscreen (red IPL2.21.0001, green spl 2.2.0001, blue, with)
so i have tried to flash it now with WM5 from T-Mobil image ver 2.26.10.105 (from this nice Board here
The flash tool shows no image information of my MDA but the posibility i there to push the update button. If i do that the update tool trys to flash a few seconds and stops with error code 294 (invalid vender id). on the MDA is noch change (still bootloaderscreen)
some one of you has an idea wath could be happend to this device ?
or an idea wath can i doo ?
Yes!!!
Your problem... is NOT READ Enough!
So please read how to make a hardSPL cause your wizard is G4....
if you do it well you can upgrade whatever you want but for this time... you need to exit bootloader screen so... perform sofresets! or hardreset!
Keep reading for more chances...
You don't need to apply HardSPL or SoftSPL to flash an official stock rom.
Which language or version was working primarily on the phone before you flashed t-mobile 2.26 ?
Secondly download 'RUU_NoId' or 'RUU_MUN' and replace it with the RUU in the rom and Run the replaced RUU,hope it'll work.
Hi,
and thanks for the answers.
i do not know wath was befor on it. i have get it with the information that there was an klabel inside for the keybord not in the slot .... and after "reparing" - the mda do not boot.
up to now i have update it with orginal firmware and it runs again ... so peraps someone has talk **** to me ?! - now i think it was a bad flash
p.s. the vendor id problem was my mistake, was the wrong update
Hi!
I have a Tytn and since yesterday the camera seems to be week.
I took a few pictures. in the evening i wantet to start the camera soft by pressing the button. An Error occured. something like: Camera not initialiesd. Software cannot be started...
I´m from germany, the error was in German....
So i shuted down the device and started new. nothing happened by pressing the button or starting the sofware.
No Error message - nothing.
Camera won´t work.
What can i do?
I don´t want to do a HardReset.
But if there is no other way, How must i do that?
Is there a Sotware Update available?
On HTC´s Homepage there is no TYTN listed.
Which one do i need, and what is to do to Update the Sotware?
THX
Antworten gerne auch in Deutsch ;-)
I don't know where to go, I have flashed several phones before, but I'm scared that my phone died on me
So, I had a perfect working HTC HD2 with the Nexus HD2 Rom.
Cotulla 2.08 HSPL, perfectly working MAGLDR 1.13 and working CMW wich I used to install the NExus HD2 Rom.
My screen was cracked and black screen, so I took it to the repair guy. He said; 'No Problem, I don't repair it, I'll send it to an HTC Centre and they only replace the screen, they don't replace your OS! It's no problem!'
So now I get my phone back, with the Boot Screen stuck on 'Go Go Go'.
It has stayed like that for 10 minutes. It won't boot. I've reflashed it using the Hyperdroid Tutorial ( http://www.youtube.com/watch?v=71WDYfDg4sA&feature=player_embedded#!)
I can get into Cotulla and got to number 8, but if I push the Home Button, I won't go into CWM.
I've went back, but they guy said: 'Everyone who brings me a broken HD2, has installed Android. Andriod on HD2 causes the phone to brick!'
Can you F***ing believe that?
They had no right to remove my software, especially after I requested it!
Anyway, what could be the problem? I'm really scared that I've paid 110EU (142USD) for a unusable phone.
Greetings,
Roy KW
Btw, have I put the topic in the good subforum?
That repair man is talking rubbish.
I suspect you need to restart and flash from new.
Since magldr is starting that means radio and hspl are fine, so start from..
Magldr - USB flasher
Install cwm and partition layout
In cwm do a "wipe data factory reset" to clear remnants of the old rom from SD card
Flash rom.
Hi Roy,
I think that samsamuel advice should work, but if not, you can just flash official WM ROM directly from SD. You will need micro SD card (capacity less then 4GB, the best is the 2GB originally attached).
And follow this guide: http://www.jayceooi.com/2011/08/15/how-to-restore-stock-rom-on-htc-hd2-video/
It is the best way to get fully working phone (do not forget to check every functionality (all buttons, light and proximity sensors, gps, cam, mic and speakers etc.)).
It is normal that something is broken after lcd replacement. My experience ..
I am not sure about this and hope that someone can confirm it, so im not the person who causes your phone to brick entirely. But what might fix it is:
- Do a wipe (task29) . You can use the HD2 toolkit to do this or download the task29.exe thingy.
- Reinstall MagLDR
- Re-flash CWM Recovery
- Install the rom again.
This should work if u have the correct HSPL and Radio installed, but if u say it starts into MagLDR i assume you already have that.
Again, im not sure if this should fix it and waiting for someone to confirm or deny it so it wont destroy your phone .
Oh and those repair guys are annoying. Mine had to go once and came back with SPL 3.03, when that wasn't supported by HSPL yet. Had to wait a month or something before i could install Android again
I'm going back to stock rom, to check if everything is working.
One thing is already in a worser condition, then I left it at the repair guy. I noticed that the Volume Up bottum doesn't click as nice as it used too.
Ugh. I hate this!
ARGHH. I can't flash NAND Andriod, nor can I flash WinMo. I am no noob at this. I've flashed several phones and I am really stuck on this. I am going to try it agian in the evening, I'm too angry( and because of that, unfocused) now.
Roy KW said:
I'm going back to stock rom, to check if everything is working.
One thing is already in a worser condition, then I left it at the repair guy. I noticed that the Volume Up bottum doesn't click as nice as it used too.
Ugh. I hate this!
Click to expand...
Click to collapse
happens a lot
Roy KW said:
ARGHH. I can't flash NAND Andriod, nor can I flash WinMo. I am no noob at this. I've flashed several phones and I am really stuck on this. I am going to try it agian in the evening, I'm too angry( and because of that, unfocused) now.
Click to expand...
Click to collapse
without details of teh problem, that's just a rant, not a request for help
My HD2 Volume Up buttons do not work, after the screen get repaired.
Is it possible to install a NAND Android without this buttons?
You can go ebay. thank you.
nik-ii said:
My HD2 Volume Up buttons do not work, after the screen get repaired.
Is it possible to install a NAND Android without this buttons?
Click to expand...
Click to collapse
If both VolUp and VolDown buttons are broken: No, it is not .. there is no other way than new flex cable. And it is not cheap http://www.amazon.com/dp/B005WVZ8QI?tag=ree04-20
// EDIT: If it is broken only Volume Up, you can install a NAND Android without any problem. I am in the same situation (broken volUp).
// EDIT: The only one problem for me is that I am unable to install Windows Phone 7 without VolUp ..
The flexcable is broken.
The Rom is a 2010 6.5 WM to boot Android from SD. It should be possible to use this for a new SD Rom, right?
samsamuel said:
happens a lot
without details of teh problem, that's just a rant, not a request for help
Click to expand...
Click to collapse
I know
I am going to take a shower and within an hour I will update you guys
Update:
TS here I've taken my time to fully examine my HTC and update you guys...
The Leo issues:
My HTC HD2 looks good. It has been repaired well, but there are some things broken after the repair.
- The Volume-Up Button is not broken, but I remember it being much nicer to push. It needed a gentle push, now I need to push it with strenght.
- Same problem as above with the SD. When I push it in, I can't gently take it out, I need to use force.
- One Screw is missing. The HTC is screwed to the housing with 3 screws, not 4.
Magldr 1.13 issues:
- I have reflashed HSPL, Magldr, and used Dark Forces Andriod Flasher to install CWM.
- I have reflashed CWM succesfull yesterday, but today I get the next error:
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
Click to expand...
Click to collapse
- When I go to 8. AD Boot Recovery in Magldr1.13, the home button does not seem to work. The Home button is required to boot CWM.
- The flashing of the .nbh stock rom file as advised by cubexe does not work. The process won't go into loading.
I'm stuck.
Please help me.
I'm so close to calling my lawyer.
The repair guy assured me that they would only repair my screen and not tinker with the software. He has already said to me: 'The people at the repair centre we're not happy that you put Andriod on it' So that really makes me think if they tried to put an updated stock rom on it.
Update; I am pretty sure my Home button is broken too. Is there any other way too boot into CWM? I can push the Phone Button, but after that it gets stuck at Go Go Go.
As far as I'm concerned, if you've requested a repair for your screen, and they've done that but in turn f**ked up everything else (bet you can't guess what those asterisks represent ) then you have every right to complain about it to whoever repaired it and get it redone/get a new one sent to you.
Also, since when has the home button been needed for CWM? This is the first I've heard about it
I'm with you. I am going back first thing in the morning. I don't care about the phone anymore. They can have it. I just want my money back so I can buy a new one.
Can someone confirm to me if the Home Button is needed to boot CWM?
Can someone confirm to me if the Home Button is needed to boot CWM?[/QUOTE]
No need Home Button. Only Vol. Up, Vol. Down, and Send.
Stock rom is running agian.
This is what I did:
1. Put USB in Telephone.
2. Go to red/blue/green flash screen using Volume Down.
3. Flashed using official HTC Rom Updater on PC.
4. Restart Device.
I have however, been scammed.
Remember those 'touchscreen-lines' that run diagonal on your touchscreen if you watch very closely?
They are not present on my device.
This is fishy.
Review on google:
Nadat mijn iphone beeldscherm in stukken lag op 8 november heb ik deze laten repareren bij Ramin Telecom heerlen. Na 3 keer was er eindelijk iemand die mijn gsm kon maken, dacht ik. Na reparatie van scherm en batterij vervanging bleek dat de batterij het niet deed. De Iphone deed niks meer. Nu 6 weken verdere doet een gedeelte van het touch screen niks meer. Volgens de baas had ik maar pech. en garantie was bij hun geen spraken. Hierbij wil ik iedereen waarschuwen om hier niks te laten maken. Oplichters €110 euro lichter en een kapotte GSM rijker
Click to expand...
Click to collapse
Wich is Dutch for:
After my iPhone screen was lying in pieces on November 8, I have it repaired by Ramin Telecom Heerlen. After 3 times, there was finally someone who could make my phone, I thought. After repair of screen and battery replacement was found that the battery was not working. The iPhone did nothing. Now six weeks doing a further portion of the touch screen nothing more. According to the boss that I had bad luck. And their warranty was no part ofof the deal. I would like to warn everyone here to do nothing. They are Fraudsters €110 euros lighter and a broken cell richer
Click to expand...
Click to collapse
Damn, really wished I've went to Vodafone. They are expensive, but at least they are honest.