hi, have a big problem, i was install software wich name i magic radio tuning on my mda compact(qtek s100). When i was winish with proces my mda is bloked! I was traing everything, soft reset, hard reset, i was poot him one day without baterry but nothing.eckran of mda is black and writes SERIAL v1.1 please help what I must to do? my mda is dead?! please help......tnks
What does the screen exactly show? is it black, or does it display an error??
Don't really understand what you mean - how about flashing new rom?
(Wenn dein Deutsch besser ist, schreib mir eine PM)
reich said:
hi, have a big problem, i was install software wich name i magic radio tuning on my mda compact(qtek s100). When i was winish with proces my mda is bloked! I was traing everything, soft reset, hard reset, i was poot him one day without baterry but nothing.eckran of mda is black and writes SERIAL v1.1 please help what I must to do? my mda is dead?! please help......tnks
Click to expand...
Click to collapse
Your phone is stuck in bootloader mode. Do you have an .nb1 backup of your ROM? You could use that to reflash the phone.
Related
I have an Problem with my MDA Compact III ( HTC Artemis) i have startet in Bootloader mode, to test mtty.exe, when i now reset the device Comes the Error
Searching for SD Card,, and he start the Bootloader with RUU.. any ideas, if the rom deledet??? where can i updating the Original T-Mobile Rom für this devices???
set 14 0 not working.... set 32 not real work...
Thanks alot, sorry for my bad english
i have the T-Mob RUU WWE installed, came invalid id, windows if booting *gg
after the charmer rebooted, there is a white screeen on it. i did hard reset but i did not help me. i got the battery out too but no no.
please help me.
Try entering bootloader mode and flashing the rom once more.
bootloader
yes i did it but couldnt be successful
i doesnt
Bootloader mode:
[Record] or + [Power] + [Soft reset]
[camera]
screen is always white and is not connected with activesynce.
thanks
call to your phone see if unit is working
when i call the charmer i hear the mail box .
it is not connected to pc too.
i dont know why i cannot be succees bootloader
now i can bootloader mode,
i did it but got this error while i upgrade my rom to newest rom 3.3...
it means in english : please check your NBF data, this NBF data cannot be used for your PDA Phone.
and if i want to install the rom version of compactII_AKU2.0_05-2006 i get such as error error 296 :this NBF file cannot be used for your PDA phone.please get newer NBF file.
what does it mean boys...
please help....
You probably have the 3.xx bootloader, find the german AKU 3.3 and flash it.
yes i found it
if i want to install the newest rom also ger.3.3 i get such as error what there write on jpeg at attachment mean in english
"please check your NBF data, this NBF data cannot be used for your PDA Phone".
Try some prophet rom with noid RUU.
where i can get it from.
please give the link.
thanks.
sorry, I'm sick and tired of providing everything for everyone. Go to prophet section and find a wm5 rom.
<salute vlodeck!>
danke an alle
thanks friends espacially vlodeck
my problem is solved.
use this link to solve it
http://forum.xda-developers.com/showthread.php?t=301323&page=2
I have serious problem with my PDA SPV M2000 after upgrade to WM6. After upgrade i try to restart my PDA with Hard Reset, but can see only 4 collored screen. I can acess only bootloader mode and nothing else... PLEASE HELP
reflash
Did you try a reflash?
I try all the steps 5 times but nothing. I try use WM6 from helmi and xpode. With the same resolution. Now i try to downgrade to WM2003...
I am back on WM2003. Thanx god
I got a gray screen whith serial v 2.07... and few pages i find dosent help me att all..... please help me some one....
brb66 said:
I got a gray screen whith serial v 2.07... and few pages i find dosent help me att all..... please help me some one....
Click to expand...
Click to collapse
the grey screen with serial v 2.07 is the bootloader mode...
maybe a reflash will do the trick...
how did you screw up the upgrading process? did you accidentally unpluged the cable? is it a corrupted file?
I have never experienced this, but, if i were you, I would reflash it. if nothing good come up,then maybe the file you are using to upgrade is corrupted...
hope this helps, and maybe the experts would have more ideas cause i am just a user.....
I've upgrade to WM6.0 pdaviet, but can't use GSM network : no services...
Any body help me plz...
fix it now, pdaviet'rom works well with 1.15.00 radio .
sorry for my English
Ibhave a tmobil MDA amd i did an upgrade to windows mobile 6 and now my MDA is slow in most of the programs also the SMS when inserting any messages the words do not show after at least 10 sec.
Please, definelly need help.
navarde
Have you performed HARD RESET?
What ROM did you use for flashing?
(also some installed programs may slow down your device a lot!)
I had the same problem. From time to time whem im flashing my phone its happening. After few soft resets it'll be ok.
Hello all,
I tried to CID unlocked my German T-Mobile MDA Compact II.
I followed this instructions: -->
http://forum.xda-developers.com/showthread.php?t=285435
I downgrade the ROM to the Button 1.05.
The screen displayed 100 % and on the PC a successfully message appeared.
Then the MDA turns off.
Now I am not able to start the MDA.
It is always black.
I tried Softreset
Hardreset (Soft-Resest + Hardreset)
But it is always black.
Any Chance for me and my MDA?
Thanks in advance.
Information before downgrading:
IPL: 3.08
SPL: 3.08.0000
GSM: 02.63.21
OS: 3.8.2.22
So no G4 device.
Please post a URL to the exact ROM you used.
I want to compare something, to see if your case can be solved with a blind BOOTLOADER.
Have you got a Charmer or a Wizzard. When you have a Charmer: Soory guy your Phone is dead. If there are realy no parts of the old bootloader, there won't be any way exept rewriting eprom out of the box.
Ah OK I see. I made the mistake.
I installed this ROM
http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
So it was for the Wizard
My MDA COMPACT II (is) was a Charmer.
Good Bye my friend.
So ein Mist.
NO/Keine Chance?
Maybe you can flash a bootloader over SD. I'll look how to do when i've time. Or you have to rewrite the eprom external. I'll look it the HTC Service Manual how to do and tell you tomorow.
Hope we can bring it back to live.
Weiteres weiß ich wohl morgen.
Grüße
ChrBeck
Oh that sounds wonderful because i want to try your rom.
thanks in advance
(Super das wäre echt nett von Dir. Ich wollte doch Dein ROM noch testen.
Vielen Dank im Voraus)
Greets
Martin
ChrBeck said:
Maybe you can flash a bootloader over SD.
ChrBeck
Click to expand...
Click to collapse
I use MITTY.exe to write a clean ROM to SD (using the "r2sd all" command).
I'm trying to get PSD read, and NTRW.exe, to save it in a format tha I can upload it to the other users here.
Well Nokia 3650,
we don't need the rom but the bootloader. I also know this method, but it doesn't write the bootloader to SD. And to use this method you need a working bootloader to start writing the rom. In the service manual there is something said about rewriting the eprom out of the device, but I can't do cause the equipment is to expensive for a student like me. I'll look on what to do. And I'll look for writing a hardSPL. This could prevent much of this problems in the future.
@ ablaze:
Press camera and reset. (Stay pressing camera till something happens). What happens? Does it stay black or are there any colors or a text? If there are colors or a text we'll be able to make your system living again.
Hoffe ich finde eine Lösung
ChrBeck
stay black.
Is your battery charged? Take a Voltmeter and test the battery.
ChrBeck said:
Is your battery charged?
Click to expand...
Click to collapse
The battery, is fully charged in another phone.
A voltmeter, can't tell you the true voltage 3.7-4.2V
It only shows an output of about 0.6V (due to the internal 'balancing' of the protective circuit inside).
OK, I think your phone is dead then. Does it show something when you press Camera and Voicedial and reset (Hardreset)? If not there are 2 posibilities:
1) The Power conector is damaged.
2) The bootloader is completly ereased. This means there is no chance for your device.
Ich kann sonst leider nichts sagen.
Hoffe nicht das es das 2. ist.
Gruß
ChrBeck
ChrBeck said:
Does it show something when you press Camera and Voicedial and reset (Hardreset)?
Click to expand...
Click to collapse
Yes, the phone will go into BOOTLOADER moode and do a hard reset with no problems. The problem is that the unit 'turns off' after showing the initial splash screen for a few seconds.
I'll find an alternate method for flashing with your ROM in a few hours.
I meant ablaze with the last 2 posts. For you it's something else. I'll try to make a SD Backup of my ROM and upload it for you (But this can take one week).
Thanks
I'm very much wiling to wait.
MDA compact cannot be flashed
Hallo!
Did you solve the problem? It seems that I have a similar problem!
My PDA goes into bootloader (colored diyplay) but when I try to flash the rom it shows me always vender Id failure or verkäufer id fehler for the original T-mobile 2.0 and 3.3 rom! What can I do?? My PDA doesnt turn to the rom rom where I can connect over mobilysync!
Please Help me, its the mda of my sister and she will kill me!
THANKS a lot!
Your case is an easy one where you should use a 'stock' RUU from www.clubimate.com with the stock drivers. In bootloader mode, it'll work for you. Just ensure your battery is charged in another unit first.
My problem was a hardware/firmware related one.
Hi
I have a very similar issue after flashing back to the stock rom following installing the 6.1 rom mentioned. When I reset soft or hard all I get is the coloured SPL bootloader screen.
I cannot complete a flash of the stock rom as it produces an update error (302) at 80% of the flash process.
Needless to say, I cannot flash with the upgrade_rom.bat either to try that as it will not boot into windows mobile.
Hope someone can help.
Chris
lawrencenetwork said:
Hi
I have a very similar issue after flashing back to the stock rom following installing the 6.1 rom mentioned. When I reset soft or hard all I get is the coloured SPL bootloader screen.
I cannot complete a flash of the stock rom as it produces an update error (302) at 80% of the flash process.
Needless to say, I cannot flash with the upgrade_rom.bat either to try that as it will not boot into windows mobile.
Hope someone can help.
Chris
Click to expand...
Click to collapse
Now up and running thanks to the rescue kit (which seemed to hang at 80% and then at 95%, but it finally got there and my charmer's back to life!)
http://forum.xda-developers.com/showthread.php?t=471490&highlight=rescue+kit
Hey people,
I have got on nice MDA with ipl and spl 2.21.0001
me problem is i have no idea wath did happend to it.
the MDA starts up shows T-Mobile ... an go to the Bootloaderscreen (red IPL2.21.0001, green spl 2.2.0001, blue, with)
so i have tried to flash it now with WM5 from T-Mobil image ver 2.26.10.105 (from this nice Board here
The flash tool shows no image information of my MDA but the posibility i there to push the update button. If i do that the update tool trys to flash a few seconds and stops with error code 294 (invalid vender id). on the MDA is noch change (still bootloaderscreen)
some one of you has an idea wath could be happend to this device ?
or an idea wath can i doo ?
Yes!!!
Your problem... is NOT READ Enough!
So please read how to make a hardSPL cause your wizard is G4....
if you do it well you can upgrade whatever you want but for this time... you need to exit bootloader screen so... perform sofresets! or hardreset!
Keep reading for more chances...
You don't need to apply HardSPL or SoftSPL to flash an official stock rom.
Which language or version was working primarily on the phone before you flashed t-mobile 2.26 ?
Secondly download 'RUU_NoId' or 'RUU_MUN' and replace it with the RUU in the rom and Run the replaced RUU,hope it'll work.
Hi,
and thanks for the answers.
i do not know wath was befor on it. i have get it with the information that there was an klabel inside for the keybord not in the slot .... and after "reparing" - the mda do not boot.
up to now i have update it with orginal firmware and it runs again ... so peraps someone has talk **** to me ?! - now i think it was a bad flash
p.s. the vendor id problem was my mistake, was the wrong update