dial key work like touch in gene!!! - P3400 General

hi.. i m using sumits vanila manila ultimate pro 3.1.1 rom... after some days my dial key is work like touch!! ... i have just reflashed my rom bt it still as it was...... NB : this problem was in my original rom also.... i think it will recover by registry edit .... bt i don't know the key.... so experts are in favour???............. HELP GUYZ

Related

[REQ] How to DELETE "PHONE" in Windows Mobile 6.1

Hello everybody !
I'm cooking a rom for my pda (mio p550) in wm6.1 !
I want to delete the phone function because thsi PDA is not a pdaphone !
When i delete all the *phone* folders in SYS, i have some problems with "calendar", "contact" and wifi !
So i think that some files in these folders are required !
Have you information about deleting PHONE function in wm6.1 ?
Great thanks !
Hello! I'm sorry I can't help you about this but I'm very glad you are doing this, so I can use again my p350!
what do woy want to delete?
THE PHONE applications
that would mean you are using wm6 PRO base. You know how to port roms, this would mean, no? Try using a wm6 classic as the base.
MMMMMMMMM
So, where can i find a wm6.1 classic SYS folder ?
I use the last sys folder issue form the diamond Si i would continue with this LAST SYS build, but i would like to "ADAPT" this WM6.1 pro et wm6.1 classic !

Cruise and my....Citroen C4 bluetooth!

Hi all,
i've a problem and i think that this is the only plase where find one possible solution!!
My Citroen have a bluetooth module that work fine with an HTC Tytn but Cruise.
With my new Cruise, the bluetooth are able to accept fine only the first call: after this, the next will switch off the audio (in fact i need to put my phone on my ear!!)
i've tried to change firmware and some radios without results! Can anyone help me??
I had this problem a few times with my Cruise working with the stock rom (WM6) and my Parrot CK3100, after upgrading to WM6.1 (udK Diamond) i never had the problem again. Im still working with my stock radio rom btw.
Thanks!! Can you send me link for downloading rom that you say, traslate in italian??
Ok...i've installed udK Diamond R4 WWE and i've saw some changes on my car but....voice calls have the same problem!
So, if i've undestood right, the problem is on the s.o. firmware and not on radio firmware??
fabrysious said:
Ok...i've installed udK Diamond R4 WWE and i've saw some changes on my car but....voice calls have the same problem!
So, if i've undestood right, the problem is on the s.o. firmware and not on radio firmware??
Click to expand...
Click to collapse
Wait a little while until WM6.1 official for polaris is available that will hopefully solve all problems with bt...
uh?? WM6.1 will be released?? When??
But do you think that is the version of WM that create my problem? I've tried with a TYTN with WM6.0 and it is working fine!
Did you try your offical rom with the new HTC bluetooth fixes?
http://forum.xda-developers.com/showthread.php?t=400752
NO!! Thanks!!!
Where can i find official rom for my italian cruise?? Or i can apply those patches to all firmware?
Offical HTC ITA rom
ftp://xda:[email protected]_radio_sign_25.65.30.04_1.58.21.23_Ship.exe
I suggest first try the fixes with the offical rom....
If it works, try them with the cooked roms...
...it didn't work!! I've installed original rom and after i've applied those two fixes without any result!
Do you have another idea for me? i'm desperate!
Hi,
I had a almost same issue with original ROM and with SONY MEX-BT2500 autoradio. It works fine with handsfree BT profile but with A2DP (stereo via BT) it worked only on first connect (disconnect after engine stop and start). I found 2 solutions:
1) after "engine restart" press number 6 on radio - it connects again to Cruise
2) flash ROM to Bepe 0.67 - it reconnect automaticaly.
...now I flashed ROM to udK Diamond R4 and I am using 1)

Problems with buttons

Hi, I've installed the new Manila 2D on my HTC Touch Cruise running with WM 6.1 from HTC.
Since I've update the system, the buttons keeps on working even when I lock the phone from the power button (a small press).
This was not happing before.
Any one knows why this is happing ?
How do I solve it ?
I have Bulid 20755 1.4.0 PV
Cooked by PDAVIET
Thanks !
Start/Settings/System/Key Lock and flag Lock All Buttons Except Power Button
Thanks !
Thanks for your help !
It works now !!!
You're welcome
I had same problems with PDAViet

Htc touch cruise unstable

Hi everybody !
I have a Htc touch cruise riginal swedish rom , and after upgrading to 6.1 from the htc site , the phone became very unstable .The camera dont work anymore , lots of crashes , synk is not working .....
Please could someone help , shall I go back to windows 6 ?
Thanks in advance /
Best Regards /
equalness
equalness said:
Hi everybody !
I have a Htc touch cruise riginal swedish rom , and after upgrading to 6.1 from the htc site , the phone became very unstable .The camera dont work anymore , lots of crashes , synk is not working .....
Please could someone help , shall I go back to windows 6 ?
Thanks in advance /
Best Regards /
equalness
Click to expand...
Click to collapse
I think the problem is the RADIO, if you do the Hard SPL and then you install this RADIO all problems with the camera, sync and the rest of the conections will desapear.
My Polaris is stable as Windows device can be stable.
But I use WWE ROM, so please compare Radio versions and whatever else you can compare.
I tried going back to 6.0 and failed miserably... It could get only worse, IMHO.
It may work!
Try this http://forum.xda-developers.com/showthread.php?t=473455
I had the same problem with my Cruise with 6.1. It restarted itself and hanged in about every phonecall. I tried every radio rom available that i have found on this forum.
I contacted HTC support and the last answer was that i should call the local ANOVO support here in sweden and request a downgrade to 6.0. They wrote also that i could be the drivers in 6.1 that caused the problems!!!
Now i has flashed the "c_shekhar WM1.60.21014aCS WWE ROM (build 21014.1.6.0)" with old drivers an the phone works again. The only problem i had so far is that Youtube application freezes sometimes and Opera also freezes sometimes.
Hi Everybody !
Thank you very much for the info , I have tryed to update the rom but that did not fix the camera problem , so I went for this solution ; installing a kokt Rom for the first time . I used ( "c_shekhar WM1.60.21014aCS WWE ROM (build 21014.1.6.0)".Now the camera works and the phone is more responsive.
The only minor problem is that I lost the swedish language.
This problem made me discover a new way to enjoy my touch cruise
Thanks again !
Best regards / equalness

BlackStone Operator Splash.. can change it ?

Hi all guys, any chance to change the Operator splash ??
i change about 4 times the rom of my blackstone.. but always appear "movistar logo"...
sorry for my bad english,
this is my BlackStone :
thank to all.
http://forum.xda-developers.com/showthread.php?t=436105
and
http://forum.xda-developers.com/showthread.php?t=431161
D'rath
thank a lot D'rath
do you know if metod of diamond work in blackstone ??
infernozeta2 said:
thank a lot D'rath
do you know if metod of diamond work in blackstone ??
Click to expand...
Click to collapse
Why not try and post back your findings?
not working ...
I have tried these parameters R ( raphael ) and D ( Diamond ).. and nothing.
http://forum.xda-developers.com/showthread.php?t=436105
= Fail on BlackStone
I will now try this other method
http://forum.xda-developers.com/showthread.php?t=431161
=Fail again
well, i have the solution but take a long of time and need to reflash 2 times :
install the original rom :
http://forum.xda-developers.com/showthread.php?p=3701330
bb operator splash..
install the rom what u want..
http://forum.xda-developers.com/forumdisplay.php?f=453
thank .
You might be interested in these splash screens.
... and here is information on how to do it yourself.
Also, you flash them just like a ROM. Just use the CustomRUU or RUUWrapper and place the .nbh file with it. It will not affect your ROM or data, as the splash screen is completely separate from the NAND flash or ExtROM. You don't need to flash another ROM first.
thank !!
This works perfectly
i have now bios splash thank to 888

Categories

Resources