Hi there.... - Touch GSM General

I'm not familliar with english, but i'll try my best to be understandable.
I've flashed my HTC phone with a firmware that don't seems to work. (Network can't be reached anymore). I think this is a HTC TOUCH CMDA, so why the rom does not work on my phone. This phone comes from orange france provider, and have 128/256MO memory, so it is if i understood well an ELFIN.
I've backed up my original rom before going up flashing, and rebuilt the rompack with htcrom tool (i hope i made it well or i kill myself down)...
Very simple question at least...
What is the procedure to flash it back ?
Help really needed quick...
Best regards.
Francois.

Hi,
Quite easy question
Download ELF_USPL_2.26.0000.zip from http://forum.xda-developers.com/showthread.php?t=445666
rename ur backupped rom to RUU_Signed.nbh
copy the new one and overwrite the old one in ELF_USPL_2.26.0000 folder.
Now run ROMUpdateUtility.exe and follow instructions, this should work.
Best regards

Related

and what if someone (me) can not afford to break anything?

Instaead of Hi I say you are great people
So the case is... I just need to have working Qtek 1010 with SOME additional soft on it inside a ROM...
I've read many pages in this forum and I'm able to find too many ways to change my ROM. I'm totaly confused.
I work for extremaly big worldwide company and they gave me q Qtek, told me to use it, gave me one simple application and web link... so I do.
But the Qtek is much powerfull than that so I need to flash my ROM.
Now comes a question: where can I find one document how to prepare for it, what tools do I need, how to do it... I know after some tries I will be confident enough to do such stuff easlily, my problem is I have only one try, they will make me w trouble if I screw my company recource.
I understand you had milion similar questions like that. Basicly I need help how to flash so I can be sure 100% not less that I can recover in case of trouble. I hope you understand I'm afraid to do it because lack of experience and you are able to tell me if I should try to flash...
or maybe it's better for me to ask my boss to by me a 512 MB SD and install all additional soft on it and stop worring about memory?
I'd appreciate any opinion... you are the best and I'm just new to this bussines...
Get an sd card, backup existing rom to sd card, very easy to do by bootloader method. Enter bootloader by holding down power while inserting stylus in the reset hole on the bottom left of pda then press top right function key, then choose ce to sd. Once you have done this you can check if it has in fact backed up your rom by putting sd card in the pda, enter bootloader, it will then give the option to program the rom, just remove the card and push the reset with stylus again, the other method to check a working backup is to put the sd card in the pda, the pda will ask to format it, say no and remove it. Once you have a backup you can either use xdatools to copy it to your pc or keep it in a safe place, no more files must be written to this card otherwise it will be rendered useless, if you wish to reuse the card sometime it will need formatting. Once you have your backup, go to www.yorch.net, cook yourself a rom and download it in the exe format, this will do a normal install from your pc while connected to pda via activesync, if it messes up you always have your backup. Once you become more proficient at using xdatools you might wish to try out lots of different roms until you are happy with the result, you can go on to sd card flashing which is a much better way of programming rom and much less prone to error because it doesnt rely on a pc connection. I would advise you to leave the radio stack alone, if you can make and receive call ok leave it alone. Have a thorough look around the forum before proceeding. Its good fun to program your pda and you can make it a much better tool, but make sure you always have a way out if things go wrong.
www.yorch.net not working... is there a place like that?
Hi!
I read the above post, one of the clearest here, and I almost got the confidence to finally do this ROM update...
But:
1) Can't find the www.yorch.net website where I could "cook myself a rom and dowload it in a .exe format"
2)It's still not very clear to me what exactly cooking a ROM means: it concerns the OS (the version 1.53, 1.72 type of stuff), the extended ROM (the default programs u get starting after and hard reset like the SW for the camera etc) or both?
Thanks!!!
Chris
Another ROM Kitchen
Try the following ROM Kitchen http://lumpistefan.dyndns.org/
I noticed that you have the XDAII. Now, someone please correct me if I'm wrong but the directions above and the ROM kitchens are all for the XDA I or Wallaby version.
Re: www.yorch.net not working... is there a place like that?
cchris said:
Hi!
I read the above post, one of the clearest here, and I almost got the confidence to finally do this ROM update...
But:
1) Can't find the www.yorch.net website where I could "cook myself a rom and dowload it in a .exe format"
2)It's still not very clear to me what exactly cooking a ROM means: it concerns the OS (the version 1.53, 1.72 type of stuff), the extended ROM (the default programs u get starting after and hard reset like the SW for the camera etc) or both?
Thanks!!!
Chris
Click to expand...
Click to collapse
Chris,
Those Roms are made for XDA1 beware it's not made for the device you have!!!!!!
What's the kitchen for XDA II
THANK YOU!
I was starting on the wrong foot... :-( :?
Anyway a couple of more question:
1) Is there a place like that for XDA II Kitchen? Is my undestanding of what a kitchen is correct?
2) The process for ROM backup outlined above, is still correct for XDA II?
Thanks!
Chris
I'm in the same boat as you CChris. I've been diligently a daily searching through the numerous topics on this site looking for similar information. I haven't found it yet - or at least nothing not-to-super-technical. I do know that you get to the bootloader by pressing the power button, reset button, and down on the toggle at the same time rather than the Wallaby way of the power and reset buttons only. It also seems that there are issues regarding 'country' and that it requires software to get around this. I haven't found the software yet - the links that I've seen all point to "itsme's" website which is currently down.
You can read the thread here: http://forum.xda-developers.com/viewtopic.php?t=9053&highlight=
Hopefully, someone with a lot more knowledge than me can go over updating the XDA II as clearly as cruisin-thru did for the XDA I.
The instructions on http://wiki.xda-developers.com/wiki/HimalayaRomFlashing are correct.
Unfortunately, there was an issue where the wiki removed the ~ from itsme's website's address. It's been replaced with %7e and now the link works.
If you download a ROM from the same vendor as your device (e.g. Qtek ROM on Qtek device, iMate ROM on iMate device, etc.) you don't need to use these instructions, you can just install the ROM upgrade from your vendor.
If you want to use the latest ROM (from iMate) and your device isn't an iMate, you need to decrypt, change the "country" code, encrypt, and then run the upgrade.
You can also edit the extended ROM when flashing, but it's easier to use itsme's extRom Tools. See http://forum.xda-developers.com/viewtopic.php?t=8422
You do NOT need to flash the ROM if you are not experiencing problems, or if you are experiencing problems which the new ROM also has (for example ugly cleartype fonts, which may be fixed without flashing). Flashing the ROM may void your warrantee. You will lose all your data when you upgrade, and you should not restore a backup, only your my documents folder.
If you are a newbie, it may be best not to flash your ROM. If you typed in itsme in google, you would have found his xs4all address as the third link, and would have quickly found out his site wasn't down at all, but the link was just wrong.
Just a warning: the things that could go wrong when flashing are potentially much worse than a wrong URL, and the answer to those problems won't be the third link in google.
NO MATTER WHAT YOU DO DON'T COME NEAR THE RADIO UPGRADE I QUOTE I FRIEND HERE THAT SAYS
DON'T MESS UP WITH A WORKING RADIO OR YOU'LL END UP WITH A SLIVER BRICK !!!!!!!!!
BEEN THEIR :x :x :x :x
Rabia said:
NO MATTER WHAT YOU DO DON'T COME NEAR THE RADIO UPGRADE I QUOTE I FRIEND HERE THAT SAYS
DON'T MESS UP WITH A WORKING RADIO OR YOU'LL END UP WITH A SLIVER BRICK !!!!!!!!!
BEEN THEIR :x :x :x :x
Click to expand...
Click to collapse
Rabia can you tell me how did you get out from there?
never got out of it

problems with 8525 Lost Radio & gms

first thing done to the phone was to use Hard-SPL-V7 then I used OS 5.2.20924 (Build 20924.1.5.0 PV DVH) Black(Full) BS V27.exe changed to Schaps_WM6Pro_WWE_3.57a_Full_28-07.exe
phone work great radio was fine for a week and lost it yesterday change back to Hard-SPL
I can't load any radio alone but loaded full roms tried RUU_Hermes_CINGULAR_WWE_2_1_.15.502.3_6275_1.40.30.00_108_Ship loads all the way but no radio
Are you sure the stock rom had a radio rom in it? If you got from here and tried it may have been a stripped rom. Try running the Shipped ROM. It may recover or may not. Radio roms are the Achille's heel of the Hermes...
hi dear Ultramag69
i have same problem with jasjam model(i dont have radio-imei-protokol)'can u help me & say what model of radio rom must i install on my devic.pleas if u know send me some web linke for downlod .
i have a puestuion too.how can i install telestra roms on device by micro sd pattern becuse that file is exe file & dont have nbh(that i need to cheng hermimg)
thanks
please help me
ultramag69 said:
Are you sure the stock rom had a radio rom in it? If you got from here and tried it may have been a stripped rom. Try running the Shipped ROM. It may recover or may not. Radio roms are the Achille's heel of the Hermes...
Click to expand...
Click to collapse
hi dear Ultramag69
i have same problem with jasjam model(i dont have radio-imei-protokol)'can u help me & say what model of radio rom must i install on my devic.pleas if u know send me some web linke for downlod .
i have a puestuion too.how can i install telestra roms on device by micro sd pattern becuse that file is exe file & dont have nbh(that i need to cheng hermimg)
thanks
satriani22, right click on the .exe file . It should have the option to "extract here". This will give you all the file. I believe you will need to search through the folders to find the RUU_Wrapper.nbh file.
Copy to an sd card formated FAT32 (must be 2Gb or less) and rename to Hermimg.nbh. Put in Hermes & reset to bootloader. Follow the prompts.
YOU MUST HAVE HARD SPL INSTALLED TO DO THIS.
This is not a sure fire way to fix this problem, you may not be able to fix this...
Make sure you flash the SHIPPED STOCK ROM, not just a stock rom from anywhere.
Good Luck...
Any Idea or link where I can get the stock radio could use the help still a little lost ..
What carrier supplied the device? If it was AT&T, doo a search for the AT&T ROM. I don't know if they still have an upgrade on their site as most carriers don't support the Hermes anymore.
Radio
downloaded radio1.54.07.00 which is strip out of AT & T rom tried from computer to flash fail loaded the RUU_signed.nbh renamed it to hermimg.nbh copy to sd tried gets about a quater of the way and locks up any ideas ?
Sorry I didn't get back to you yesterday mate, bit busy.
I hate to be the bearer of bad news but it may be that you have a permanent brick on your hands....
The radio rom is the number 1 cause of permanent bricks. If the memory area of the radio is corrupted then its impossible to fix. I have yet to see ANYONE say that they have permanently recovered the radio rom successfully.

Request - Complete N00b's Guide to flashing HTC Touch Viva to Win Mo 6.5

People,
Problem: I want to upgrade my HTC Touch Viva to Win Mo 6.5.
Riders: I want to ensure that if required, I can flash the HTC original ROM that the company gave on phone. I have already downloaded original ROM from amarkangda 's thread.
My Status: I had an Asus P320 which I had upgraded to Win Mo 6.5. It involved copying the flash.bin (or whatever it was) to mem card, boot it with some keys pressed (service mode or somethin like that) and it took on from there.
Requirements: I am too confused with SPL and what not since this is my first HTC phone. Can anyone please provide a complete step by step (Bullet Point wise) guide as to what I have to do to upgrade the phone to Windows Mobile 6.5.
I tried the search function but was not able to find anything. If there is something and you know a link to it, please provide it. I will be highly obliged.
do hard reset fast
see the link for flashing ( http://forum.xda-developers.com/showthread.php?t=446446)
I Agree
I think that "The N00b's Guide to Flashing Opal" really is needed...
i mean, yes, there are a couple of guides with some information on "how to" but nothing complete and simple enough for noobs... there are a lot of new HTC users that have never flashed a phone before and have no idea how to do it, and even some experienced users on flashing other brands (mi personal experience, i used to flash motorola V3, Z6 and L7i) but get really lost when it comes to flashing HTC.
And after i learned i tried to help other new users but without success (see post 4 and 5 here http://forum.xda-developers.com/showthread.php?t=638911).
A complete guide should be made with all the terminology explained, the most common methods to flash, where to find stock roms, what kind of custom roms are there (ej. Light rom, cooked rom, what winmo ver is it using and pros and cons on all of them, etc.) all the software needed and a step by step guide with FAQ included. it should be community maintained to keep it always up-to-date.
I'll offer my help for anything needed and for Spanish translation.
@ mehulkarate
@mehulkarate
i'm sorry that this is just a copy and paste (and a bit of editing) from another post that i wrote, but i'll be easier for you:
I had the exact same problem when i first started to flash htc opal... didn't know how to do it, and didn't know what rom to use... maybe someone should create a complete, step by step guide (flashing opal for dummies) and post it as sticky...
ok, here it goes...
Flashing:
0.- if you'll be using a cooked rom (a modified Rom), you'll need to do a hardSPL. check here: http://forum.xda-developers.com/showthread.php?t=446446 (HardSPL is basically the way to remove the drm lock on the phone)
1.- Make sure that you have activesync if you are using windows xp or windows device manager if you are using windows vista and the latest version of .net framework installed on your pc.
2.- unzip the new rom files on a folder somewhere accesible (desktop for example)
3.- connect the device as an activesync conection, make sure the battery is charged 50% or more
4.- just run the RUU installer (Rom Update Utility), sometimes named CustomRUU.
5.- Follow the onscreen instructions.
YOU ARE DONE.
that's it... no complications, no special drivers, no weird commands or files to copy and paste. so simple. Just one thing: make sure you don't disconect usb during rom update.
so, resumed: Download Rom, Connect activesync, run RUU, done.
About what's the best 6.5 rom: PhamQuang. check for the latest on the rom development section. but different users will recommend different roms, so i'll recommend to try several before sticking to a particular one.
great...
su8044 said:
@mehulkarate
0.- if you'll be using a cooked rom (a modified Rom), you'll need to do a hardSPL. check here: http://forum.xda-developers.com/showthread.php?t=446446 (HardSPL is basically the way to remove the drm lock on the phone)
1
Click to expand...
Click to collapse
if he isn't going to use a cooked rom (modified rom) what should he be doing flashing???
neways...good of you to help noobies out.
@mohitkumar
there is an alternate way to do the same: which one is harder or easier is up to you
RUU (Rom Update Utility) via SDCard (your memory card) search for it in the forum.
Thanks Guyz.
So HardSPL has to be done, there is no escaping doing that?
Do I absolutely need to have DotNet on my PC? (I do not particularly like it, it slows down my PC)
Since I have already upgraded the Asus P320 from SD card, that will always be an option for me. Any ideas or links to rom which i can just put in sdcard, boot in service mode(or whatever with that volume down key pressed thingy) and it takes on from there, no hardspl etc? Just like i did for the Asus P320..
Especially if it saves me from going through installing .net on PC.
Yes
as far as i know: Yes and Yes... there's no scaping hardSLP because that's the one that'll let you install a modified rom... And .Net is needed because all update utilities will use it (HardSPL and RUU)...
But as Freelancer81 said, there's an alternate way to install a custom RUU through the SD card for the Opal too, i'll let you find that out on your own because i have never used that method nor have any previous experience on similar methods.... maybe you wont need HardSPL and .NET this way.
I'm searching for Volunteers to create the noobs guide to flashing opal... anyone willing to help PM me.
Hmm, so i will search for a ROM that can be installed from the card. May be, just may be, it can be done without the HardSPL thing.
If that fails, I will stick it up and go with process given here.
mohitkumar said:
Hmm, so i will search for a ROM that can be installed from the card. May be, just may be, it can be done without the HardSPL thing.
If that fails, I will stick it up and go with process given here.
Click to expand...
Click to collapse
As far as i know you cant install any cooked rom via SD card with out hardspl only official roms can be flashed via SD without hardspl. Bro if you are so afraid about ur warranty then i would suggest u to use default os for more time, or install hardspl u can retain ur warranty by flashing stock spl when needed.

(ROM) Anyone can help me the correct way to flash my Viva

Hi there, i have some problem regarding flashing the ROM..
Currently i am using WM 6.1 for my HTC VIVA..and i wish to flash it to WM6.5..
But i dont know the correct way...
Anyone can help me up?
whats the issue in it its easy just download it connect ur phone with the pc sync it and run the exe
it will simply guide u through the procedure
please note data will be lost from ur phone memory
me too. im confused. please help
Flashing your Viva
Hey guys, I'm a newbie here also and you are right, it is confusing. But here's what I've been able to figured out.
Go to this thread and download the file Opal_HardSPL_v2_0.zip.
When you uncompress this file you'll find see the file Opal_HardSPL_v2.exe. This program is what you use initially to flash the ROM of your Viva so that it's able to be Flashed with newer ROMs.
Download the ROM of your choosing. Sorry, can't help you much here. There are a lot of different ROMs out there and everyone's tastes are different.
Some of the ROMs that you download come with an installation program and some do not. After un-compressing your downloaded ROM if all you have is the single file RUU_signed.nbh then all you have is a ROM.
If you need an ROM update program there are a few out there to choose from. Here is a link to one that you can use.
If your ROM didn't come with an instalation program then copy it into the directory with the installation program you just downloaded and uncompressed.
You need to have your Viva connected and synced to you computer before continuing. Once this is done Flash your Viva with Opal_HardSPL_v2.exe that you previously downloaded.
Re-sync your Viva to the computer.
Flash your Viva by double clicking the ROM Update utility executable.
It takes about 10 minutes or so, be patient. Your Viva will reboot when the Flash is complete and you then just follow the instruction of the screen.
I think that about covers it. If anyone has any suggestions or updates or knows of something that I forgot to mention then please post a response.
Thanks
thanks for easy and quick steps, but i dont have guts to flash my touch viva.

T-mobile htc HD2 did not care anymore after installing rom

I have a T-mobile Htc HD2 did not you call more after installing a rom wrong (I believe), version 1.48, which is the rom that was in it was 2.13. This in English wanted to install one in Portuguese. I stopped with the phone without turning, if someone can help me
marcelobbjf said:
I have a T-mobile Htc HD2 did not you call more after installing a rom wrong (I believe), version 1.48, which is the rom that was in it was 2.13. This in English wanted to install one in Portuguese. I stopped with the phone without turning, if someone can help me
Click to expand...
Click to collapse
So youre phone is not turning on after flashing a new ROM? Sorry, its very hard to understand your post. The translation isnt the greatest... If you did try to flash a ROM and now youre phone is not turning on, do not tell T-Mobile what you did, it will void your warranty. Simply send the phone to HTC and tell them it just wont turn on. Theyll send you a new one under warranty. Good luck!
You tried to install a ROM for the Euro HD2 and that will brick a US HD2...the instructions here at xda clearly state not to use those on that phone.
As donkeypunch said, your only hope is to send it to HTC service directly, and not disclose what you did, just state that it suddenly won't boot anymore.
One person referred me to download the original rom for it is 2:13 ... and extract the file, you will see many files, has one. nbh, you rename it to leoimg.nbh, copy it pro sd, with the hd2 off you keep the volume down button and turn on the HD2, so install the rom by hd2 sd .. Already downloaded the rom just do not have these files available. Only the executable program's rom. Does anyone know where this rom down this way?
i also facing the same problem after i install ROM and now my HTC HD2 totally cannot turn on. Any solution? please help! Thanks in adcvance!
We have been seeing this more and more. I hate to tell you this but it is time to send it back as you have a very nice brick now. Please guys/gals Read before you flash, understand what you are doing before you try and you will save alot of time.
marcelobbjf said:
One person referred me to download the original rom for it is 2:13 ... and extract the file, you will see many files, has one. nbh, you rename it to leoimg.nbh, copy it pro sd, with the hd2 off you keep the volume down button and turn on the HD2, so install the rom by hd2 sd .. Already downloaded the rom just do not have these files available. Only the executable program's rom. Does anyone know where this rom down this way?
Click to expand...
Click to collapse
You need to unzip the exe file and it will give you the rest of the files. Good luck but dont count on it fixing it

Categories

Resources