Essentially, after setting up my emails yesterday and using the outlook direct push client my HD2 demanded i use the phone lock (with password) everytime i locked the screen
I disabled the password locking using the 'Lock Prevention.cab' file so the phone locks by just using the hard keys on the phone itself, however i would like to restore the slide-lock function, does anyone know how i can?
btw i am a complete noob when it comes to HTC, so any help is appreciated!
thank you
Hello,install HD2Tweaks or Bsb tweaks to reactivate all the registry's modification .Of course the slide-locked is in the software .
Related
Hi,
I am trying out AKU2 with Push e-mail for my organisation. I want to implement a security policy that forces a PIN number and locks the screen after a period of no use. All works fine, so far so good.
However when the device is actively in use for something like tomtom GPS, even when powered externally. the screen lock cuts in requiring you to enter the PIN whilst driving, which clearly makes it unusable for GPS or really even as a carphone (although voice dialling on a bluetooth headset works even with the screen locked)
Does anyone know of a solution to prevent the lock kicking in whilst on external power?
Thanks
Richard
I have the same problem here. It makes TomTom unuseable after 30 min. Mostly I'll drive a little further than that! :wink:
Does anyone else has this problem, and hopefully an solution?
This is another aspect of the upgrade that I hate (in addition to the fact that you can't get vibrating notifications of emails while the device is in standby).
It's a problem for a lot of people....
I've updated my Universal to the AKU ROM and I'm having the same problem with TomTom, iGuidance, and OncourseNavigator (aka. Navigon). I don't know of a solution yet. I'm hoping someone will write a little application that will allow the user to specify "if program 'a' is running, prevent the screen lock. When program 'a' shuts down (i.e. exits), then re-start the timer for the screen lock").
I'd be willing to pay a lot of money for an application like that right now....
Same Problem
Same problem here in the german QTek ROM.
What about collecting a bug-list (No vibration on push email, Lock screen problem....) in the forum and sending this to QTek?
Re: It's a problem for a lot of people....
weatheryoko said:
I've updated my Universal to the AKU ROM and I'm having the same problem with TomTom, iGuidance, and OncourseNavigator (aka. Navigon). I don't know of a solution yet. I'm hoping someone will write a little application that will allow the user to specify "if program 'a' is running, prevent the screen lock. When program 'a' shuts down (i.e. exits), then re-start the timer for the screen lock").
I'd be willing to pay a lot of money for an application like that right now....
Click to expand...
Click to collapse
Is'nt it possible to make that same application to force a screenlock by pressing a hardkey? (on my work the phone is laying on my desk and i dont like that someone read my mail, msn or hotmail.
When there is an application which can do that, i don't have to use the automatic screenlock and there is no problem anymore when using Tom TOm
Re: It's a problem for a lot of people....
weatheryoko said:
I've updated my Universal to the AKU ROM and I'm having the same problem with TomTom, iGuidance, and OncourseNavigator (aka. Navigon). I don't know of a solution yet. I'm hoping someone will write a little application that will allow the user to specify "if program 'a' is running, prevent the screen lock. When program 'a' shuts down (i.e. exits), then re-start the timer for the screen lock").
I'd be willing to pay a lot of money for an application like that right now....
Click to expand...
Click to collapse
Is'nt it possible to make that same application to force a screenlock by pressing a hardkey? (on my work the phone is laying on my desk and i dont like that someone read my mail, msn or hotmail.
When there is an application which can do that, i don't have to use the automatic screenlock and there is no problem anymore when using Tom TOm
>>When there is an application which can do that, i don't have to use the automatic screenlock
The problem with AKU2 policy is that the administrator of the exchange server decides whether you use the automatic screenlock and how long it locks after, the length of the password etc etc... The settings are greyed out after the 1st time you connect to your exchange server... so you no longer have a choice on the automatic screenlock...
R
rich.simpson said:
>>When there is an application which can do that, i don't have to use the automatic screenlock
The problem with AKU2 policy is that the administrator of the exchange server decides whether you use the automatic screenlock and how long it locks after, the length of the password etc etc... The settings are greyed out after the 1st time you connect to your exchange server... so you no longer have a choice on the automatic screenlock...
R
Click to expand...
Click to collapse
And it even stays like that after you have deleted the exchangeserver!!!! :evil:
So watch out trying to connect to your companies server with your mobile device. I think a hardreset is the only way to get rid of this annoying pin. :evil:
Hi All,
I set my 8125 up to synch with my work exchange server in order to keep my calendar and contacts up to date.
My work server enforces a device based password now frequently when I go to access the device I have to put in a password before it unlocks and I can access it's functions.
Anyone know how to disable the password requirement?
I am not talking about removing the password to connect to the exchange server, just the enforced password to access the device itself after it has been sitting idle for an hour or so.
I figure it has probably set registry values to control the password type, size and frequency it has to be entered as well as enabling/disabling it.
Anyone have any knowledge of how this is implemented on WM5 with push email?
http://www.zenyee.com/
Bypass push email password
Perect!
Thanks
Could someone post a more direct answer to this question? I can't find anything on zenyee to address this....
Thanks!
EDIT: Never mind - I found the "Zenyee.com Stay Unlock.zip" utility here: http://mobilitytoday.com/forum/showthread.php?t=13030&page=2. (attached in case it disappears again!)
StayUnlock
More info can be found on this at
http://mobilitytoday.com/forum/showthread.php?t=13030
Zenyee StayUnlock worked fine for me until I upgraded to an 8525. Now I am not sure if it is working or not. Once it informed me that the security policy was being applied but I have not seen it since and occasionally when I turn on the phone I have to enter a password. It happens every time if I power the phone all the way off and then on again.
I just modified the lock timeout to be 24 hours so that might help.
In order to access that setting you may have to modify a registry key to make the option availabe. I had to do this on my 8125 but the 8525 already had the key set. Details of that key change are in the same thread of the link above.
Working on 8925?
Can anyone get this thing to work on an 8925?
I installed the Cab Zenyee.comStayUnlock.cab
I see StayUnlock in the Startup Items Folder.
I see Zenyee.comStayUnlock in the "Remove Programs" window.
I have checked my registry and it is already set to 1.
I still get the prompt for password every 20 minutes.
Do I need to do anything besides install this cab (since my registry is already set properly)? I keep reading that people are "modifying the lock timeout". What does that mean and how do you do it? Heck, changing this to once every 24 hrs is MUCH better than every 20 minutes.
Robert
Nevermind. I just found out where the "password settings" was. (settings > personal tab > lock). I've set that to 24 hours. We'll see if Stay Unlock keeps that from prompting me every 24 hrs.
Robert
I installed the .cab file that I found on here and I was very pleased with the results
I then cooked it into my ROM and am still pleased
One thing that was slightly nagging me however was the notification you get when the policy is reapplied. For some reason our IT dept have configured the policy to refresh every hour, which I can obviously bypass with this excellent utility. Unfortunately every hour there is a notification and a (slightly) annoying bleep as the utility kicks in. Not that noticable but still a bit annoying.
Anyway I went direct to the site (http://www.zenyee.com/) of the developer and found a newer version (2.0) that operates in silent mode by default
Excellent..... Hope our IT dept don't find out
ADB100 said:
I installed the .cab file that I found on here and I was very pleased with the results
I then cooked it into my ROM and am still pleased
One thing that was slightly nagging me however was the notification you get when the policy is reapplied. For some reason our IT dept have configured the policy to refresh every hour, which I can obviously bypass with this excellent utility. Unfortunately every hour there is a notification and a (slightly) annoying bleep as the utility kicks in. Not that noticable but still a bit annoying.
Anyway I went direct to the site (http://www.zenyee.com/) of the developer and found a newer version (2.0) that operates in silent mode by default
Excellent..... Hope our IT dept don't find out
Click to expand...
Click to collapse
i personally would be more concerned about IT telling HR.
As an IT Admin i can say those policies are there as much to protect corporate info as to annoy end users.
Stay Unlocked
I've been using this little app for 2 years since my Kaiser days and I love it. Now they got a new version which doesn't prompt security at all!
deedee said:
i personally would be more concerned about IT telling HR.
As an IT Admin i can say those policies are there as much to protect corporate info as to annoy end users.
Click to expand...
Click to collapse
That's true and reasonable, but at the same time you have no chance to modify the applied settings temporarily, even when it causes more trouble than maintains security. Just an example: You use your PDA for car navigation. Chances that it will be stolen while you are driving are extremely low, but it is very dangerous to enter a PIN every 15-20 minutes during driving. For these occasional situations it is very useful to override default policy settings and set PIN activation interval to several hours instead of minutes.
Completely agree on this. I could have lived with the lock policy when the device stayed unlocked when plugged in, but keying a PIN while driving should not be done.
I had the same issue before with Blackberry Connect. Last friday I switched to ActiveSync push synchronization and stumbled into the WM lockscreen issue.
Zenyee's tool seems (just using it for some hours) to work on WM 6.5.x (23xxx build) Energy ROM.
Hi!
I'm using my Vario II with a hosted exchange server provided by 1und1 and so I'm stuck with the enforced security settings.
Some time ago I read someone managed to disable this but unfortunately I don't find it any more. I tried the search engine but it didn't come up with what I was looking for.
Anybody who can help me?
Thanks!
With the enhanced security, are you not able to get anything working on your PPC? Or do you just not want it there? If it's the latter, I'd really like to know why you wouldn't want security on there.
Hi! Everything works fine. But I use this on a private basis and therefor it is unnecessary for me to use a password. Additionally I use an Anti-Theft-Software which is unlikely to be of any help if the device is password protected.
Apart from that it's just a matter of convenience. I've seen that it's possible and now I would like to try it.
I suppose telling your IT dept that you want to be on the password exception list is out of the question eh?
I'm using a hosted exchange. There is no way of changing the server settings.
Anybody help please?
XDA II said:
Anybody help please?
Click to expand...
Click to collapse
Try the solution posted in the link below. I haven't tried it but I think it might help...
http://pdaphonehome.com/forums/ppc-...blem-cannot-turn-off-password-lock-fixed.html
Thanks for your answer. I tried it but unfortunately this does not do the trick... :-(
Hi! If you just want to turn off the security check when you turn your phone on. You can go to SETTINGS->(the symbol with the key don't know what its called on english rom) and set the time to 24 hours. Now all you have to do is turn your phone on once within 24 hours...and you will never see the security keypad again. I hope that is of any help to you...
Brevi
Thanks for the tip. It's already set to 24h. The reason I want to disable this is not just me being to lazy to key in the 4 numbers but to allow my anti-theft-software to work properly. But when the SIM is changed a softreset is performed and the Password is required before the thief's SIM can be activated and an alert SMS can be sent.
That's my problem.
This is EXASPERATING !
The password screen pop up always after 1 mn without touching screen.
This is independant of the settings.
Is there a possibility to modify this behaviour ?
Thanks in advance.
do you use exchange push mail? policies can invoke password screen.
I spoke about the Universal password.
It appears even if you do nothing after 1 mn and even if you do anything except touching the screen.
If you watch TV it appears, if you watch video it appears, if you phone it appears...
Exasperating !
My previous XDA IIs didn't do that.
Vince
are you sure that you don't use the "password protect" in the settings???
You could always remove the password.....
Maybe it's something to do with both screen blanking and keyboard timeout settings. Not just one but 2 different settings.
Yes, I use the "password settings" and I want it, but I don't want the password screen which appear itself after one minute.
The setting is "0 minute".
I want it if I switch off the PDA but I don't want it itself as a "screensaver" after one minute !
Vince
Me too
Hi all, this is happening to me too. I've just installed 'Jwrightmcps Crossbow ROM Update 2.02.02 WWE', and the Universal asked me for a password when I configured push email (like it did under WM5).
However, unlike WM5, it now comes on after just a moment of inactivity - it also demands a password when the machine's been woken up by a phone call, meaning so far I've missed every call I've had, while I'm entering my PIN (infact, I'm worried that this PIN entering process is causing the call to hang up).
Any thoughts?
Many thanks in advance.
guys, i have sth really annoying. whenever the phone is turned off and on again, i have to push down and AFTER that enter the PIN every time. i am unable to uncheck the mark not to ask for pin anytime. how can i get rid of it??
please help
thank you.
Are you using email through an exchange server???
If so please try zenyee stay unlock...
yes i am using outlook exchange for my mails (push mail).
will try the mod. thanks!
hmmm. i downloaded this here: ht*t*p://journal.zenyee.com/2008/10/19/stay-unlock-goes-20-after-two-years/
changed the reg key in: HKLM\Security\Policies\Policies 00001023
when i launch the stay unlock application i can check/uncheck but not safe settings (error occurs).
again: when the device locks I only want the slide down function and no PIN afterwards.
please help
Strange, it should work just fine.
Maybe HD mini is not supported? You can try to contact the developer...
Good luck.
Im using the Zenyee Stay Unlock-app, and it works like a charm on my HD MINI.
No more forced pin-lock after 1 min!
Note: No registry changes had to be done either.
dorkus said:
guys, i have sth really annoying. whenever the phone is turned off and on again, i have to push down and AFTER that enter the PIN every time. i am unable to uncheck the mark not to ask for pin anytime. how can i get rid of it??
please help
thank you.
Click to expand...
Click to collapse
Yust install bsb 1.6