i posted this in another thread but no one replied so thought this one mite be more busy.
i am new to all this and i stupidly went running into things and tryed to ROM upgrade my t-mobile MDA Vario II (HERM300), not knowing i had to CID unlock first, it has broke! when i boot it up i can not get passed the t-mobile splash screen and it also flashes "no-gsm". i have read many suggestions on fixing this but i have had no luck. i can get into the boot screen however and get the red green and blue stripes.
i have IPL 1.01 and SPL 1.04.
it will allow me to connect to my PC with USB but active-sync does not recognize i have connected the phone.
please help someone. i just need a way i can get this thing working again. if i could just get the phone into a state of use again that would be good.
please help, at least let me know if Ive got a chance of repairing it
i believe if you can get it in to bootloader mode you can flash back to original rom and start over
i thought that to but when i tryed the t-mobile rom it said "connection error" and also said it should be connected through active sync. but then agen it mite of been the wrong t-mobile rom but im sure it was for the vario ii. do you have a link to the one i should try please?
i downloaded the official UK shiping rom from t-mobile site and upgrading now through bootloader. will report on what happens.....
nope, keep getting "device not responding" or "connection error". any other sugestions?
i looked on here http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick and it says that i have to "Flash any type2 radio in NBF format. If that doesn’t work, flash the radio using HERMflasher" please could someone tell me how to do this, if this is the solution to my problem or if there is another way around this. thanks.
please help someone i realy need to fix my phone
Cool down....
what's ur radio version?
Also have u read this? http://wiki.xda-developers.com/index.php?pagename=Hermes_SimUnlock - TRY THIS FIRST, before attempting anything else...
ok, i have tryed that "sim and cid unlocker" and i beleve that you have to connect with active-sync because when i tryed it when i was in boot loader it said that it was not connected but it was. i will get my radio version now.
EDIT: my radio version is: 0107
EDIT2: also, here are some other numbers (which i dont know what they mean but mite be needed) which apear on boot-up t-mobile splash screen, in red letters/numers, just before "no-gsm" flashes on:
M 05
S 04
B 06
D 1.21
If you can get into the Bootloader (Rainbow Screen) you should be okay (Not a Brick)
Go download a Radio Rom from the wiki.
Enter Bootloader first, then connect to PC. Then flash the Radio Rom.
Edit, Also Read: http://forum.xda -developers.com /showthread.php?t=296722
berdinkerdickle said:
If you can get into the Bootloader (Rainbow Screen) you should be okay (Not a Brick)
Go download a Radio Rom from the wiki.
Enter Bootloader first, then connect to PC. Then flash the Radio Rom.
Edit, Also Read: http://forum.xda -developers.com /showthread.php?t=296722
Click to expand...
Click to collapse
ok, ill try that, does it need to be a perticular radio because im not super CID? for some reason the link will not work.
oooooo, it seems to be workin!!!!!!!!! im at...16%. ill report what happens after update finished
yes!!! it worked!! thank you very very much for your help!!!
Hi guys,
just seeing if anyone can help me.
I was updating my Radio when the program failed (pretty sure it was a bad USB connection)
at first I could only get to bootloader but i managed to bypass it with help on the wiki.
Now it loads to the windows splash screen and stays there.
I'm running IPL 1.04 and SPL 2.10.Olipro
I was in the process of completing resetting the phone with another ROM but I got stuck at the radio part and now my phone is screwed.
Can anyone help me out?
Sure, there is thread on reviving bricked Hermes devices here and solution to common bricking problems here. Hope it will help you ressurect the device.
I just realized I should post this here instead.
Hello,
Today I upgraded my G4 HTC p4300 using the TNT ROM Pro+HTC Home. It is unlocked, but the splash screen was branded for Unicel.
The Upgrade seams to have worked on the computer end of it, but When I boot my device, it shows HTC Mobility logo, then goes to the Red, Green, Blue screen. If I plug it into the computer with USB, I hear the USB connection sound, and USB appears in the lower left hand corner of my p4300.Active Sync does not see my device. I tried Re-flashing the ROM and it gives me an error. I have also tried the Wizard love ROM Spanish version(couldn't find the English) that resulted in a connection error.
What should I do?
Any help would be greatly appreciated.
Who is your cell carrier?? I only ask because you're one of the only other people that call your phone the "P4300" I've had mine for over a year and know everything their is to know about it. I've discovered through trial and error and befriending an HTC big shot that the P4300 Wizard was the generic version of all the Wizards countless incarnations. My point is I've got the correct roms and ext roms to get you back in business. let me know.
Aaron
HTC P4300
I got old tytn (not from network) from friend. I can't turn on phone in the comm manager. I tried different roms and hspls (1.40 and 2.10). But I can't flesh radio to phone it just got stuck at 0%. After soft reset it got stuck at bootloader, so i need to flesh rom (os) again to run Win. I assumed is locked, so I tried sim unlock v3a from pof, it make no difference.
Can it be hardware problem?
Please help.
I too have the same problem, I can not flash the radio and the phone is not online, I would like some advice, thanks
Hi I have a Desire HD running Cyanogan Radio and ENG are both off i have leeroid Kernal everythign works fine but my phone is locked to three. i have managed to change the splash screen and do everything else but the tool for unlocking SIm is not working keeps saying error connection i have tried to do it with ooted up device, i have tried whilst in bootloader and tried in fastboot and none seem to work .
Can anybody help me please
This thread is dead as duplicated.
Please don't reply to this thread.
Use http://forum.xda-developers.com/showthread.php?t=1066271
Mods, please lock or delete.