Related
Hy..
belive me.. i tried nearly everything... and ive been through all of these posts... but i dint find anything helping me out with my problem...
ok, i try to explain in a short way!
I want to upgrade my "old" xda orbit (rom: 3.4.207.2GER, Rom Date: 18.04.07) wit a new rom ( something like "Artemis_Touch_4.02_Full_with_4_sided_cube")
BUT IT DOES NOT WORK!
Yesterday i updated my "new" DIAMOND to a new rom (Bepe 0.94)... so i basicaly know what to do..
But my ORBIT doesnt like to be upgraded..
USPL: doesnt work
RUU: doesnt work
Artemis_Touch_4.02_Full_with_4_sided_cube: doesnt work
downgrade to wm5: doesnt work (dindt find the correct one, i guess...)
now i am out of any more idears... ive got a lot of error messages... such as 260, 270 corrupt files, and many more...
wonder why my orbit is still running after all these unfinished and unsucessfull "updates" but still running with original german O2 WM6 system.
Does anybody can give me a hind what do do, how to update or where to look?
Thanks a lot...
Using Artemis USPL: in the DOS window always the message "program cannot be found".. running aprox up to 50% and stops, than closing the DOS windo
the orbit stays, after a short action showing the Linux guy, with a "white/black" display..
than using the RUU: still connected via usb to my pc.. still black display..green LED on top of the device on..checking the rom.. showing mine correct (3.4.207.2) to 9.99
clicking "next": starting updating... pda display gets threecolored.. than gray.. showing 99% and than 100% after just a few seconds..
Prog stops.. telling me that the file is corrupt (Error 270).. my device reboots and starts with the O2rom
I downloaded the Artemis USPL several times from several locations.. always the same message...
Hard to explain.. but i hope you got my point?!
Btw.. thats just one of the ways i tried.. and just one of my errormessages..
Thanks
Did you tried to remove your SD card before you flash?
Cheers
I Got It I Got It
Thanks "Zecanilis" for your answer.. but that was not my problem.... i took out the sd card as well as the sim card.. as i said.. i tried nearly everything!
But this morning ( i spent the whole night in front of my computer ) i foud the mistake.... an easy one!!
The "Artemis_USPL" file, you can find in all of these threads, is not working with my devices (pc and/or ppc)!?! i dont know why.. but it doesnt.
As i told you i always got messages in the DOS window "program cannot be found", "program cannot be used"... and the intallation skipped all files and stopped always around 50%.
but at 3 in the morning i found a USPL file in the net, with a different name, and it worked with the first try!!
The File is named "arte_uspl".
Just worked fine and smooth 10..20..30....... finisehd.
I am able now to install any rom I like!
Btw... i swithed to Mossis V2.2Ger - a very nice one i think.
But maybe i'll try some more...... because i am able to!
Take care and a lot of fun with your devices!
Bobo
I have the same problem
Where can i find/download the "arte_uspl"?
Thanks for your help.
well...good question
i didnt write down the link.... i dint save the link... sorry!
what i did was to save the file on my computer!
i tried to uplad it to this post... but it didnt work?! sure i am to stupid to do it right!?
so plase help me to post it here, and i will do so!
or gimme a mailadress to send it to!
sorry for beeing so stupid!
greetings
orbit do not boot, do not flash
Hello,
i am searching for a solution of my problem:
i updated my orbit with the new mossis ROM and everything was well, and i used my orbit after this update!
Yesterday i Reset my device and after this the orbit dosen't start again!
After showing the bootsplash the device hangs
So i try to flash the device again:
first i try this:
- start the bootloader manually (voice button + reset)
==> shows: IPL 3.04.0001
SPL 1.11.0000
- starting the ROM Update Utillity
==> the screen of my orbit is grey and shows the update bar (0%)
==> RUU shows the following mesage: ERROR[300]: INVALID UPDATE TOOL
(i used the original german o2 update file)
second try:
update with the SD-card:
- SD-card (512MB) formated with FAT32
- copy the image file xxxx.nbh to the SD-card and rename it to ARTEIMG.nbh
- start the bootloader manually (voice button + reset)
==> screen: Checking SD contens
==> Update SD Image?
- bushing the volume down button
==> screen is red green blue and shows IPL 3.04.0001 and SPL 1.11.0000
Update flash do not start!!!
if i try this sd-card based update with the RUU_uspl_signed.nbh file, the device bootloader start and update the ROM
have anyone an idea???
ohs said:
Hello,
i am searching for a solution of my problem:
i updated my orbit with the new mossis ROM and everything was well, and i used my orbit after this update!
Yesterday i Reset my device and after this the orbit dosen't start again!
After showing the bootsplash the device hangs
So i try to flash the device again:
first i try this:
- start the bootloader manually (voice button + reset)
==> shows: IPL 3.04.0001
SPL 1.11.0000
- starting the ROM Update Utillity
==> the screen of my orbit is grey and shows the update bar (0%)
==> RUU shows the following mesage: ERROR[300]: INVALID UPDATE TOOL
(i used the original german o2 update file)
second try:
update with the SD-card:
- SD-card (512MB) formated with FAT32
- copy the image file xxxx.nbh to the SD-card and rename it to ARTEIMG.nbh
- start the bootloader manually (voice button + reset)
==> screen: Checking SD contens
==> Update SD Image?
- bushing the volume down button
==> screen is red green blue and shows IPL 3.04.0001 and SPL 1.11.0000
Update flash do not start!!!
if i try this sd-card based update with the RUU_uspl_signed.nbh file, the device bootloader start and update the ROM
have anyone an idea???
Click to expand...
Click to collapse
Dear ohs,
There are many ppl, who have this Error 300 issue, but there is no help/solution available anywhere. Maybe the best option is to send your device to HTC, I guess they'll replace your motherboard, if in warranty you'll be lucky!!! unless they find out if you have messed up the device
xda orbit
same problem here,i tried eveything,my xda orbit wont flash it starts to instal the new rom but when it reaches 3% it resets himself ...any sugestion guys ? i tried upls,hard-spl etc arthemis rom everything . help please
Guys, I would suggest, if your device is under warranty, do send it to HTC Service center rather than breaking your head with it. Even I have been through such problems but ultimately I sent it to the service center and expecting my device in a couple of days with a motherboard changed.
If your warranty is not valid anymore then you are in trouble.
Good Luck
Xda Orbit
dose anyone knows the right stepts to flash this Xda Orbit German rom with a wwe rom ? please post it so we can try,i have this xda for 1 year now and iam still using the german rom on it,i what to start to use it but what can i do ? learn german ? somebody help ! i tried to flash it with RUU_Artemis_O2_UK_3.4.206.2_4.1.13.50_03.06.90_Ship all gose well untill 3 % from update the xda resets and gose back to his rom,please help me out ! i`ll mae a donation for this cause ! Thanks
arte_uspl
bob75 i found the rar arhive for your arte_uspl the link is : http://rapidshare.com/files/36943423/arte_uspl.rar
Hi all,
a few days ago I installed IlSalgo 6.5 rom because sometimes i've found my polaris with 3lit3 rom powered off.
This morning after I powered on my polaris it stopped at the first screen (on energy star) and then it shutdown.
I tried with an hard reset while it starts, but nothing changes...
Could you help me?
Thanks in advance,
Reveng3
P.S. sorry for my english
try to put into bootloader; hold camera and press the reset hole.
Then when in this flash your stock rom that was shipped with it or the 6.1 upgrade that was released. See if that brings it back to life!
Let us know what happens after that and go from there.
I tried putting it into bootloader... it shows the colors screen and then shutdown....
But now it works....(finally it stopped on colors screen without power off)
maybe after i removed the microSd (i tried with and without microSd, with and without sim, soft reset, hard reset, bootloader)
this evening i'll try using again my microSd card...
thanks
I have another problem...
i'm trying to change rom.... (pcarvalho eXtreme) because after I restored the rom.... it stopped working again...
in the pcarvalho rom page there is "flash this rom 1st if you have any stability issues" (the original htc rom)
ok, i'm flashing my htc....
i'm on 31% and the update is blocked.....
is there a way to avoid problems? now I think the only thing i can do, is to remove the usb cable or kill the update process....
please help me...
thanks...
Edit: i'm trying with recovery (rom updater utility, after connection blocked, says me to recover.....).... brrr....
Edit2: blocked again on 31%...... please tell me something....
Edit3: All it's ok! After recover, before starting again flashing I used another Rom (my first used.... 3LIT3)... Now it works fine!
Reveng3 said:
I have another problem...
i'm trying to change rom.... (pcarvalho eXtreme) because after I restored the rom.... it stopped working again...
in the pcarvalho rom page there is "flash this rom 1st if you have any stability issues" (the original htc rom)
ok, i'm flashing my htc....
i'm on 31% and the update is blocked.....
is there a way to avoid problems? now I think the only thing i can do, is to remove the usb cable or kill the update process....
please help me...
thanks...
Edit: i'm trying with recovery (rom updater utility, after connection blocked, says me to recover.....).... brrr....
Edit2: blocked again on 31%...... please tell me something....
Edit3: All it's ok! After recover, before starting again flashing I used another Rom (my first used.... 3LIT3)... Now it works fine!
Click to expand...
Click to collapse
check radio version always
Hello people ...
not much to say ...
i think i bricked my phone .... =(
i installed one of the ROM downloaded from here ...
and it brick my device ...
what should i do ? :`(
it says on the screen :
" Your OS ROM isn't customized for you hardware.
Please refresh the proper ROM code or contact the service center. " ((
p.s. i cant install other ROM
couse it cant see the usb (((
i got the problem solved =)
guess it came from it self couse i was nurvios )))
i entered the hard boot menu pressed the UP (volume) button and then pressed 2 time i think the up(coluve) and down(volume) then it not entered the boot option but connected the USB ...
i installed other ROM and its working fine again ... )))))
so far I have seen 1000 people on xda developers that assume to have bricked their phone...and probably 1 out of 1000 has truly done something stupid to brick his phone.
[email protected] said:
so far I have seen 1000 people on xda developers that assume to have bricked their phone...and probably 1 out of 1000 has truly done something stupid to brick his phone.
Click to expand...
Click to collapse
And then there are the 999 who think they have done something clever, but still bricked their phone...
gladly im not one othe 1\1000 people that done it =)
i had my luck on this one =)
i guess i was celebrated too early...
i tryed to delete the HSPL
by the video tut ... ( yeh yeh ... what can be more easier )
well ...
it says to get a stock rom ( i did it )
it say to put it on the SD after formating it to 32 bit ( i did it )
then hard boot ... ( i did it )
power button ...
and ........... puff ...
now i get: ( On boot ):
PB81100 HX-BC
SPL-1.42.0000 XE
microP(LED) 0x05
microP(TOUCH) 0x03
Upgrage ROM code error
Please try again ...
WHAT IS THAT ? :`(
dose it means i brick it ?
(p.s.)
Tryed to install the HSPL again ...
the install is successfull. ... but no change on the device ...
you have used the wrong rom.
you must use the correct rom that was on the phone when you got it.
Or the correct region. In doubt, just enter your phone's serial number on the HTC download page (here for 1.66) to make sure you get the correct official rom.
Then extract it, put the nbh on your card, etc.
" Sorry, this software download is not suitable for your device. "
hhmm .... i had the hong kong rom originaly ...
maybe it means i have to download it from an hong kong htc site ?
yes....choose the hk site
Are you solved the problem?
How?
I have a similar problem.
I have the same screen at boot, but when I try load anything my device as stuck in progress bar (0%) even for shipped rom’s…
This happens when I try load a shipped rom from SD. Before that I have loaded several cocked rom’s from SD without problem.
the fix...
hold volume up and down together and insert the USB cable then run a different or a good ROM
Bricked friends hd2!!!?!?
PLEASE HELP... I was trying to install android throught NAND on my friends hd2,, in the process of flashing the ROM via Magdalr or whatever.. it froze so i pulled the battery.... and it doesn't turn on. I've pulled the battery on my other friends HD2 so im confused as to why this one in particular does not turn on! PLEASE HELP!!! SHE'LL KILL ME IF SHE FINDS OUT!!!
EDIT: PHEW i figured it out... but im having trouble installing these ROMs
Did i brick my phone??
So my brother was trying to do who knows what to my hd2 and now the hd2 powers on and it says "stick together" (its a t-mobile hd2) and it just stays on that screen.. I'm not the most tech savvy person so bare with me... usually below where it says "stick together" it would show a bunch of numbers and codes and after a few seconds it would load windows mobile and the phone would work fine. However, mine just stays on the stick together and theres no more of those numbers and codes on the bottom.
Did he just brick my phone? And if he did... HOW THE HECK DO I FIX THIS???
HELP :*( i need to use my phone!!
Thanks
Heh I'm in the process of doing my very first flash to get a full install of Andriod 2.2 on my HD2, once I find out a specific answer I've been looking for I'm gonna start the process
HD2 brick
I just bricked my HD2 (USA T-Mous). I tryied update RADIO when was progress on PC 100% in PDA 96% and freezed. I just pulled battery and phone is bricked. When I connect to PC via USB, i can listen twice short plug sound and this is all. No bootloader, nothing. Any reason? Thanks
Did you try to turn on your mobile pushing "vol down" to load usb mode ?
After that, you can flash an official rom.
That "saves" my Leo...
NarkotiQUE said:
I tryied update RADIO
Click to expand...
Click to collapse
if the radio had 51 in the version (example 2.07.51.xx) then it is a brick, dead, gone.
NarkotiQUE said:
I just bricked my HD2 (USA T-Mous). I tryied update RADIO when was progress on PC 100% in PDA 96% and freezed. I just pulled battery and phone is bricked. When I connect to PC via USB, i can listen twice short plug sound and this is all. No bootloader, nothing. Any reason? Thanks
Click to expand...
Click to collapse
Did you have any luck? Does your device have HSPL? Let me know if you still need assistance.
xtntx said:
Hello people ...
not much to say ...
i think i bricked my phone .... =(
i installed one of the ROM downloaded from here ...
and it brick my device ...
what should i do ? :`(
it says on the screen :
" Your OS ROM isn't customized for you hardware.
Please refresh the proper ROM code or contact the service center. " ((
p.s. i cant install other ROM
couse it cant see the usb (((
Click to expand...
Click to collapse
hi i'm looking for a motherboard htc hd2 bricked? can you sell yours?
Hi XDA Devs,
I've managed to break my HD2.
I was in ANDROID and shut down the phone over A. since then:
It's stuck on the white boot screen with the HTC logo (without any numbers in the left low corner).
No usb connection, no further sign of hope.
Hard reset, battery out -> nothing seems to help.
Do you got an idea how to get my HD2 working?
Thank you in advance!
Max
HD2 was running on:
2.10 radio (Vodafone Germany)
Artemis 24
Get into the bootloader mode ! do a task 29 format ..once it is completed again get into the bootloader mode and then flash the rom u were using ! cheers
I've managed to get into the bootloader mode and perform task 29.
Right now I'm tryin to upload artemis 24 to my phone but its either stuck at 0% or somewhere between 35%-60%. never came further than that AND it always takes awefully long!
EDIT: now its always 0%. I'm flashing with SSPL_RUU.exe
Do you got an idea how I'm able to fix that?
Thanks
ok ..do one thing ..enter bootloader ..perform task 29 again ...then again bootloader ...change ur radio to 2.07.50. ...u will find this radio in the energy rom thread ..once u have flashed the radio ...enter bootloader again and flash the latest energy rom .:. forget abt the artemis rom for now ..do this and then tell me
yeah! thx, everything went just fine.
I get the feeling something was wrong about Artemis rom.
thanks very much!
Thats awesome ! ..good ! always use energy roms they are much more stable and much better and perfect in itself ,artemis is just like the stock rom and has its own benifits ! welcome anytime ! cheers
My HTC HD2 is not reacting when i touch the screen!!
Hi.... I have an HTC HD2... i have 3 months since i bought it... ever since the phone was working awsome... but like 3 weeks ago the phone started working really slow.. so i decided to do a factory reset to solve the problem... after the phone was rebooted it worked about 10 min perfectly fine.. then it locked as it usually dose (when its not in use).. but when i tried to unlock the phone,the screen was not reacting.. the problem is NOT that the screen dose not display.. the problem is that when i pass my finger throgh the screen to unlock,it dosnt work.. its like freezing... i tried to upgrade the ROM but it still gives me the same problem!!!
Is there a way i can fix this problem??? if there is i would really apreciate youre help!!! Thanks...
I have t-mobile UK unrooted + simlocked
When i power on phone .. Round red icon comes on screen , then HTC logo & some music , then again tmobile logo comes & move a little & phone hangs there .. not going forward
Hard reset not helping
i have downloaded this rom
RUU_Buzz_Froyo_HTC_WWE_2.22.405.1_signed hboot + radio removed .
I make a gold card & rename it to update.zip but updating not starts
HELP
i am a newbie in this
Thanks
anyone know which name to be set in update file
Who can help me here ?
You don't need to rename it to update.zip, just select install zip from sd card.
Download the right rom from shipped rom for your phone and run it from your PC
I don't think you can use the file you mentioned above as your phone is not rooted ( I might be wrong)
foxy6800 said:
Download the right rom from shipped rom for your phone and run it from your PC
I don't think you can use the file you mentioned above as your phone is not rooted ( I might be wrong)
Click to expand...
Click to collapse
Tmobile UK Shipped Rom for wildfire .. i am searching for last 2 days but did not get it ..
http://shipped-roms.com/shipped/Buzz/
tmo stand for T Mobile ( I think)
foxy6800 said:
http://shipped-roms.com/shipped/Buzz/
tmo stand for T Mobile ( I think)
Click to expand...
Click to collapse
Thanks
let me download & check it up
RUU_Buzz_TMO_UK_1.14.110.1_Radio_13.45.55.24_3.35.15.19_release_130442_signed.exe
is this supports rooting ?
Update comleted by Shipped Rom
but still same position
Round red icon comes on screen , then HTC logo & some music , then again tmobile logo comes & move a little & phone hangs there .. not going forward
so the problem is related to any H/W issue ?
http://img703.imageshack.us/img703/4314/82699533.jpg
this is the condition on phone
what type of forum is this ??
no one reply's ??? Just reading ... Ugghhhh
Have you tried holding the volume key down and switching on the phone
then facotry rest
yes offcourse ... Hard reset was always my first step ..
update with shipped tmobile uk rom .. Then hard reset again but still same
Can you not run unrevoked?
Sent with love from f0xy while mobile!
how can i unrevoked it if USB debugging is not ON ... ...
i think problem is from h/w b/c if shipped rom is flashed OK & phone still have same problem then it must be hardware problem