Hi, Searched without luck once again (Can Someone give me the Google Advanced search URL that they use to search the HD2 section?)
I am rather new to flashing and would like to flash to Radio 2.08.50.08_2 from http://forum.xda-developers.com/showthread.php?t=632833. I have the following file for the flash: RUU_Leo_Radio_15.34.50.07U_2.08.50.08_2.exe
My two questions are:
1: Can I flash just the radio without installing HSPL?
2: If not, Can i revert back to stock SPL after flashing just the Radio ROM?
TicKByT said:
Hi, Searched without luck once again (Can Someone give me the Google Advanced search URL that they use to search the HD2 section?)
I am rather new to flashing and would like to flash to Radio 2.08.50.08_2 from http://forum.xda-developers.com/showthread.php?t=632833. I have the following file for the flash: RUU_Leo_Radio_15.34.50.07U_2.08.50.08_2.exe
My two questions are:
1: Can I flash just the radio without installing HSPL?
2: If not, Can i revert back to stock SPL after flashing just the Radio ROM?
Click to expand...
Click to collapse
1) No unless it is made for your specific region which in this case it is not.
2) I wouldnt advice it, why would you need to do so?
1: Can I flash just the radio without installing HSPL?
Click to expand...
Click to collapse
No, as above.
2: If not, Can i revert back to stock SPL after flashing just the Radio ROM?
Click to expand...
Click to collapse
Yes, by sd card flashing your original stock rom BUT in doing so you would also flash back the original stock radio.
I'd install HSPL, flash your radio, and then only flash back to stock should you ever need to remove HSPL.
thanks
Thanks for the replies. Thought I should revert to the stock SPL coz I'm scared I forget to reflash should I need to send it in for repairs.
But I suppose I just gotta make a long lasting mental note to do so. Whats the best method of flashing the radio with HSPL? SDCard or PC?
(I am using a zip file with an nbh and a custom RUU rathere than the exe stated above)
stay away from sd card flashing. Theres no need, and it isn't so safe (opinion, im sure there are plenty of people will tell you otherwise, heh).
Instal HSPL, flash the radio from USB, reboot, job done, forget about HSPL even being there unless you need to return it, in which case flash the stock rom from sd card and hspl is gone.
unzip the nbh into a folder(maybe rename it RUU_Signed.nbh, i forget), copy customruu.exe in there too, run customRUU.
check out the videos in here mate it might help you
http://forum.xda-developers.com/showthread.php?t=621930
Actually flashing JUST the radio via microsd card is a very fast and efficient way of doing it as long as it is just the radio image and nothing else. I used to travel quite a bit and had different radios that worked better in different countrys so I had them all saved on my card and then when you want to change radio you can just rename it to LEOIMG.nbh, move it to the root of your microsd card and enter bootloader to flash.
Flashing via microsd card is in essence alot safer as long as you stay FARR away from stock roms.
I would advise you to keep HardSPL on your phone for as long as you can. Its like having a get out of brickville card just in case anything goes wrong. The only way you wouldnt be able to flash back a stock spl is if the screen broke or you dropped your phone and I dont think its going to be covered by warranty then anyway lol.
TickByt,
URL you asked for in post 1
http://www.google.com/advanced_search?q=+site:http://forum.xda-developers.com&hl=en&lr=&as_qdr=all
WB
Related
I tried a few cooked roms and I like some things about them and others I dont, so I was going to flash my phone back to stock and if there are any upgrades/updates I would like to do so also.... Please advise me, should I do this why or why not... and How can I go about doing this ? (Would I just use hspl2 1024 and reinstall 2.08 first, then install the latest stock rom ? -but where can I find the latest official stock rom?-can I get it from htc? )....
thanks in adavance...
If you have already run hspl2 there is no need to do it again. All you need to do is download the shipped rom (available here and at ppcgeeks.com) and flash it. There haven't been any updates for the stock rom as of yet. Your personal choice on if you want custom rom or stock. Custom roms usually have less bloatware and performance enhancements that make them ideal over the stock rom.
Link to stock rom: http://forum.xda-developers.com/showthread.php?t=653938&highlight=tmobile
looking for help
I installed hspl 2.08.0000 and flashed a custom rom, then I tried to flashed a vodafone Uk shipped Rom and now my Hd2 won't even boot up, when I connect it to the usb windows xp sees the device and tries to install a driver but then fails to find a driver. I cant even use mtty because usb is not listed as one of the selections. does anyone know how to help Please
Could be because you flashed a shipped rom that is for a different device. The european HD2 is different than the US HD2. If you have a US HD2 flash a rom that is designed for 1024 Leo (recommend Miri and Steve's Eleganicia). Put the phone in bootloader and then flash from pc or you can rename the .nbh from a rom to LEOIMG.nbh and place that in the root of your storage card to flash. Can get to bootloader by holding volume down and pressing the reset button under the back cover, holding vol key til tri-colored screen appears.
it wont let me get into bootloader mode, my computer does see the hd2 but wont let me access the usb
Maybe someone else can chime to correct me if im wrong but sounds like you now have one expensive paper weight. Flashing a rom that is not for your phone is not good.
Flashing a Euro Rom on your TmoUS HD2 will brick your phone - for good. Why are so many people doing this?
tmo are sure to get wise to this and stop replacing them at this rate. I've seen 6 or 7 people with the same problem in two days.
Guys with a tmous,
1 - DONT flash any stock roms except the one from tmous. Stock roms include a radio and it will kill your phone.
2 - DONT flash any radio with a .51. in the version. It will kill your phone.
3 - dont flash any cooked rom not based on the 2.10 rom. It will kill your phone. (i think, , , possibly recoverable, not sure yet)
4 - most of all read first, flash later.
OK PLEASE do not hijack the topic,
Remember I asked how can I reset my phone back to completely stock (like when I first bought it).... and then after that I would like to update it (if there are any updates)....
Thanks for all the advice so far...
erebusting said:
OK PLEASE do not hijack the topic,
Remember I asked how can I reset my phone back to completely stock (like when I first bought it).... and then after that I would like to update it (if there are any updates)....
Thanks for all the advice so far...
Click to expand...
Click to collapse
2 ways.
1 - connect phone via USB, run hspl1024, choose spl 2.08.0000, thats your spl back to stock. Then flash the tmous 2.1 rom over usb, thats your radio and rom returned to stock.
2 - you can get the tmous 2.1 rom, extract the file ruu_signed.nbh, copy it to sd card, rename it leoimg.nbh and reset your phone, which will see the nbh file and flash it, and because it is from sd card it will also reset the spl (and radio) to stock.
i'd go for option 1, as i haven't read much about people flashing sd card on the tmous, so for now steer clear.
samsamuel said:
2 ways.
1 - connect phone via USB, run hspl1024, choose spl 2.08.0000, thats your spl back to stock. Then flash the tmous 2.1 rom over usb, thats your radio and rom returned to stock.
2 - you can get the tmous 2.1 rom, extract the file ruu_signed.nbh, copy it to sd card, rename it leoimg.nbh and reset your phone, which will see the nbh file and flash it, and because it is from sd card it will also reset the spl (and radio) to stock.
i'd go for option 1, as i haven't read much about people flashing sd card on the tmous, so for now steer clear.
Click to expand...
Click to collapse
thank you... so will this unvoid my warranty?
erebusting said:
thank you... so will this unvoid my warranty?
Click to expand...
Click to collapse
it's the spl that voids the warranty, not the rom. when you boot to bootloader, so long as it says
spl 2.08.0000
then you are good to go.
Thank you!
I didn't see this asked in the forums, but just a general question:
If I flash an official ROM which removes HardSPL, can I just reload HardSPL all over again? There are all these warnings about losing HardSPL forever with official ROMs, but can't we just go back and forth 'safely'? Thanks.
mjaweeka said:
I didn't see this asked in the forums, but just a general question:
If I flash an official ROM which removes HardSPL, can I just reload HardSPL all over again? There are all these warnings about losing HardSPL forever with official ROMs, but can't we just go back and forth 'safely'? Thanks.
Click to expand...
Click to collapse
Yes you can add, remove whenever you want!
Just did this yesterday - works fine.
That's what I thought.. thanks guys.
Most of the post that have warnings also state that as long as you don't flash a stock ROM from the SD Card you can go back to the HSPL without any trouble. So, I would use the RUU application, just to be on the safe side.
flashing an official rom over usb won't remove hspl anyway. only flashing stock over sdcard affects the spl.
Does this mean that you can get the phone to be the original Tmobile rom easily? If so can someone tell me how? I installed HSPL as well as a new radio and rom, and I'd like to backtrack to the original retail version of the phone. Really looking for help with this, and don't want to brick my phone..Anyone? Thanks a bunch.
Yes, flashing from SD card would remove HardSPL, that was kinda the point of the thread. If I flashed my HD2 back to stock from the SD card, can I just reinstall HardSPL. I don't see why not, if I could already do it out the box. I think the warnings mean if flashing goes bad, HardSPL is overwritten, so that safeguard is no longer in place.
nickymonster, just download and flash an official TMOUS rom from the sd card. The main TMO HD2 ROM forum has everything you need in the stickies.
mjaweeka said:
Yes, flashing from SD card would remove HardSPL, that was kinda the point of the thread. If I flashed my HD2 back to stock from the SD card, can I just reinstall HardSPL. I don't see why not, if I could already do it out the box. I think the warnings mean if flashing goes bad, HardSPL is overwritten, so that safeguard is no longer in place.
nickymonster, just download and flash an official TMOUS rom from the sd card. The main TMO HD2 ROM forum has everything you need in the stickies.
Click to expand...
Click to collapse
want to go back to stock SPL, use the HSPL app, and select the "stock" SPL. If you flash a stock ROM from your SD card, you will replace your HSPL with the stock one, but YOU WILL NOT be able to go back to HSPL. Instead, use the app, and flash a stock with RUU via usb...back to stock.
BlackElvis79 said:
want to go back to stock SPL, use the HSPL app, and select the "stock" SPL. If you flash a stock ROM from your SD card, you will replace your HSPL with the stock one, but YOU WILL NOT be able to go back to HSPL. Instead, use the app, and flash a stock with RUU via usb...back to stock.
Click to expand...
Click to collapse
That's as clear as I've seen yet, thanks. Does strike me odd, though. Wonder what it does to block hardspl from resintalling?
does the hard spl program (HSPL2_1024_RUN.exe) have the stock spl in it for restore? i need to restore it because i need to return my phone. any help is appreciated.
nick714
BlackElvis79 said:
If you flash a stock ROM from your SD card, you will replace your HSPL with the stock one, but YOU WILL NOT be able to go back to HSPL.
Click to expand...
Click to collapse
thats just plain not true, im afraid. Just re run the hspl1024 app and resintall hspl.
For the past week I've been on the fence as to whether or not I would keep my HD2, and for a couple of days I thought I was going to return it. I ended up finding the source of the problem I was having, and after really getting to understand the OS, I changed my mind.
I ran HardSPL and flashed to a couple of different ROMs, but after encountering similar issues with both cooked ROMs, I decided to flash to a stock ROM and try again. By this point, I was convinced I was going to return it, so I went ahead and flashed via microSD, uninstalling HSPL.
Now that I've decided to keep it, and figured out what was causing the problems, I would like to go back to one of the cooked ROMs (Dnik and Miri's.) I'm hesitant, because I read that reinstalling HSPL after flashing to stock SPL via microSD, I could brick my device. Is this true, or could I reinstall HSPL on my device, and start flashing ROM's again?
In the meantime, I'm making due with the stock ROM (with a bunch of tweaks installed,) and I'm cool with it, but I would much rather the one I was using before.
Thanks in advance to anyone who can help me with this!
Okay is there any reason why you went back to SPL using that method?
All you had to do is run the HSPL program and select part to SPL.
Now that you want to keep it the best thing I can tell you is to maybe go in as a warranty exchange so you don't risk it just make something up and since you have a normal SPL they should take it back.
I was actually thinking of doing that, but would rather not if I don't have to... you know?
I will keep it in mind, just in case.
First I heard of this...
I went to a HSPL'able rom with stock SPL, then I HSPL, task29, flashed new cooked rom, voila.
So if you return back to SPL from HSPL, then go back to HSPL, it could potentially skew your device??? Doesn't sound legit to me..
glcK23 said:
First I heard of this...
I went to a HSPL'able rom with stock SPL, then I HSPL, task29, flashed new cooked rom, voila.
So if you return back to SPL from HSPL, then go back to HSPL, it could potentially skew your device??? Doesn't sound legit to me..
Click to expand...
Click to collapse
I was thinking the same, but it specifically says this in the tutorial on flashing for newbs. It sounds logical that if I flashed to a stock ROM with a hackable SPL version, I should be able to reinstall HardSPL... but I'm not taking the chance without confirmation.
glcK23 said:
First I heard of this...
I went to a HSPL'able rom with stock SPL, then I HSPL, task29, flashed new cooked rom, voila.
So if you return back to SPL from HSPL, then go back to HSPL, it could potentially skew your device??? Doesn't sound legit to me..
Click to expand...
Click to collapse
If you read in this Thread by mskip ( senior Moderator) he explains on how to flash custom roms and if you flash a stock rom via microSD the HSPL2 would be over written by the SPL that is attached to the stock rom which means you would not be able to HSPL and could possibly brick the phone.
Flashing Via MicroSD Card
NOTE (PLEASE READ): If you flash a Stock Rom via microSD Card then it will overwrite your HardSPL with a stock SPL included in the nbh file. If you flash a v2.01 or later Rom (with SPL2.*) you will NOT be able to reinstall HardSPL onto your device and could end up bricking it. This does not apply to custom roms as they do not include an SPL. BE CAREFUL!!
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
Edit: & after reading that all over again to make sure I don't sound like a stupid idiot i still did. I guess as long as you did not install "If you flash a v2.01 or later Rom (with SPL2.*)" you will end up with an SPL so you will need to HSPL it again. Guess I should have read that more carefully sorry
rlacsamana1989 said:
If you read in this Thread by mskip ( senior Moderator) he explains on how to flash custom roms and if you flash a stock rom via microSD the HSPL2 would be over written by the SPL that is attached to the stock rom which means you would not be able to HSPL and could possibly brick the phone.
Flashing Via MicroSD Card
NOTE (PLEASE READ): If you flash a Stock Rom via microSD Card then it will overwrite your HardSPL with a stock SPL included in the nbh file. If you flash a v2.01 or later Rom (with SPL2.*) you will NOT be able to reinstall HardSPL onto your device and could end up bricking it. This does not apply to custom roms as they do not include an SPL. BE CAREFUL!!
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
Edit: & after reading that all over again to make sure I don't sound like a stupid idiot i still did. I guess as long as you did not install "If you flash a v2.01 or later Rom (with SPL2.*)" you will end up with an SPL so you will need to HSPL it again. Guess I should have read that more carefully sorry
Click to expand...
Click to collapse
So, are you confirming that flashing a stock ROM with a hackable SPL, then running HardSPL again will brick my phone?
I actually flashed to stock ROM 2.10.0 via microSD, then updated to latest stock ROM... if that makes any difference.
Edit- Just found this in the "how to flash via microSD" sticky at the top of this forum... http://forum.xda-developers.com/showthread.php?t=681317
"If you are flashing an "Official" ROM direct from HTC or T-Mobile, you will more than likely over-write your SPL (Second Program Loader). This means, even if you have HSPL installed now, you could be reverted back to SSPL, rendering you unable to flash custom ROMs.
To make matters worse, if you flash an ROM higher than 2.10 and you attempt to install the current (as of 5/21/10) HSPL, you will brick your phone. Yeah, it's bad.
So, assuming you have flashed an official ROM over 2.10 via the SD card and you decide you want a custom ROM, follow these simple directions:
(You do not have to have your phone connected to your PC for these steps)
Download the "Official" ROM from here. (Thanks to zelendel for the upload!)
Follow the instructions above to flash your phone with this image.
Once you phone has fully booted, I recommend doing an extra hard-reset.
Next, visit mskip's thread to download the latest HSPL and flash that (you can flash it either via RUU or via microSD).
If done properly you should now be able to once again flash custom ROMs. Congratulations!"
So, this contradicts what is in the "flashing for newbs" thread in the ROM development forum. Hopefully someone notices this and corrects the information accordingly... as this is can really intimidate new users.
gilla409 said:
So, are you confirming that flashing a stock ROM with a hackable SPL, then running HardSPL again will brick my phone?
I actually flashed to stock ROM 2.10.0 via microSD, then updated to latest stock ROM... if that makes any difference.
Edit- Just found this in the sticky at the top of this thread... http://forum.xda-developers.com/showthread.php?t=681317
"If you are flashing an "Official" ROM direct from HTC or T-Mobile, you will more than likely over-write your SPL (Second Program Loader). This means, even if you have HSPL installed now, you could be reverted back to SSPL, rendering you unable to flash custom ROMs.
To make matters worse, if you flash an ROM higher than 2.10 and you attempt to install the current (as of 5/21/10) HSPL, you will brick your phone. Yeah, it's bad.
So, assuming you have flashed an official ROM over 2.10 via the SD card and you decide you want a custom ROM, follow these simple directions:
(You do not have to have your phone connected to your PC for these steps)
Download the "Official" ROM from here. (Thanks to zelendel for the upload!)
Follow the instructions above to flash your phone with this image.
Once you phone has fully booted, I recommend doing an extra hard-reset.
Next, visit mskip's thread to download the latest HSPL and flash that (you can flash it either via RUU or via microSD).
If done properly you should now be able to once again flash custom ROMs. Congratulations!"
So, this contradicts what is in the "flashing for newbs" thread in the ROM development forum. Hopefully someone notices this and corrects the information accordingly... as this is can really intimidate new users.
Click to expand...
Click to collapse
Well according to your post you updated a stock rom higher than 2.01 but I do not know if that rom had an SPL2 because then it would over write your HSPL2. that initially what you need to find out to see if that stock rom had an SPL2 attached to it.
If you read the quote above, it specifically says "So, assuming you have flashed an official ROM over 2.10 via the SD card and you decide you want a custom ROM, follow these simple directions." This obviously means that HSPL has been uninstalled, and is now SPL2. The link he gives for the "Official" ROM is 2.10... which you can use HardSPL on (which I had to do to flash in the first place, and worked fine.)
I believe the warning in the other tutorial is to warn users, and ensure they don't try to run HardSPL on a device with a ROM version later than 2.10 (which will brick your device.) If I'm reading correctly, this means that as long as I revert back to the stock 2.10 ROM, I can run HardSPL again safely.
This is exactly why I'm hoping someone in the know will shed some light on this subject, and set things straight.
Bumping this to the top, can anyone sort this out? Today is the last day of my buyer's remorse period, so I need to know if I should exchange my device or not.
gilla409 said:
If you read the quote above, it specifically says "So, assuming you have flashed an official ROM over 2.10 via the SD card and you decide you want a custom ROM, follow these simple directions." This obviously means that HSPL has been uninstalled, and is now SPL2. The link he gives for the "Official" ROM is 2.10... which you can use HardSPL on (which I had to do to flash in the first place, and worked fine.)
I believe the warning in the other tutorial is to warn users, and ensure they don't try to run HardSPL on a device with a ROM version later than 2.10 (which will brick your device.) If I'm reading correctly, this means that as long as I revert back to the stock 2.10 ROM, I can run HardSPL again safely.
This is exactly why I'm hoping someone in the know will shed some light on this subject, and set things straight.
Click to expand...
Click to collapse
You are understanding this correctly.
If you run the 2.10 ROM from the SD card then it will remove the HSPL2 from your device (if it is the official version w/ SPL)
If you update to the 2.13 ROM from the SD card and it changes the SPL to 2.1 (the tri-colored screen), then DO NOT try to run HSPL2 (this is bad).
If you have 2.13 ROM installed and 2.1 (2.10) SPL installed onto your phone then you can install the 2.10 ROM and it should overwrite the SPL to 2.08.
Now you can install the HSPL2 again.
So to recap; get into your bootloader and find out what SPL you have 2.08 or 2.1; (You can install the 2.13 ROM without it updating the SPL).
2.08 and the word Couletta= you are good to go
2.08 and no Couletta = you can HSPL2 your phone
2.1 downgrade to the 2.10 ROM from the SD card before you even attempt to run HSPL2. and before you try make sure the bootloader shows 2.08!!
hopefully this clears it up for you.
Nibbley15 said:
You are understanding this correctly.
If you run the 2.10 ROM from the SD card then it will remove the HSPL2 from your device (if it is the official version w/ SPL)
If you update to the 2.13 ROM from the SD card and it changes the SPL to 2.1 (the tri-colored screen), then DO NOT try to run HSPL2 (this is bad).
If you have 2.13 ROM installed and 2.1 (2.10) SPL installed onto your phone then you can install the 2.10 ROM and it should overwrite the SPL to 2.08.
Now you can install the HSPL2 again.
So to recap; get into your bootloader and find out what SPL you have 2.08 or 2.1; (You can install the 2.13 ROM without it updating the SPL).
2.08 and the word Couletta= you are good to go
2.08 and no Couletta = you can HSPL2 your phone
2.1 downgrade to the 2.10 ROM from the SD card before you even attempt to run HSPL2. and before you try make sure the bootloader shows 2.08!!
hopefully this clears it up for you.
Click to expand...
Click to collapse
That clears things up perfectly, THANK YOU!
I'm getting ready to flash back to 2.10 now, and reinstall Dnik & Miri's ROM... so stoked!
Quick one:
I've got the WWE HD2, sending it to HTC repair tomorrow so I need to flash it back to all stock firmware. What exactly do I need to do ? I'm asking cause I've heard of some bricked devices cause by restoring to stock the wrong way and wanted to be sure.
Do I need to flash back first the SPL from HSPL or the ROM to 1.66 I've had ?
flash 1.66 rom, then run hspl2 and choose 1.66.0000.
Where can I find one to download ? the ROM that is
leo official roms thread in rom development section (it will be on page 1,2 or 3, or use the stickies sticky at the top of the list), first post, first link, 1,66 folder.
Ok cool, but which one should I get ? what are the differences ?
just pick a stock rom that has been released in your region. Take the .nbh, rename it to LEOIMG.nbh and drop it on the root of your storage card.
Put the phone into bootloader, and it will flash the stock ROM and relock the phone, all in one step.
I've downloaded the most popular ROM there and executed it, I didn't move any files to my SD. So now I've got the stock ROM loading but the it's not with the original SPL yet right ? I need to flash that back too ?
moav said:
I've got the stock ROM loading but the it's not with the original SPL yet right ? I need to flash that back too ?
Click to expand...
Click to collapse
samsamuel said:
flash 1.66 rom, then run hspl2 and choose 1.66.0000.
Click to expand...
Click to collapse
thats what the red bit is for
Sorry I'm such a noob but the disclaimer says :
5) Uninstallation
Only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
So I need to put this file on my device first and then use the HSPL2 utility ?
no..thats only for HSPL.
hspl2 can install SPL's as well.
so, you've got your stock rom and only need your stock spl...
do, what samsamuel says!
DN41
Thank you, just wanted to be sure I didn't brick anything.
Ok, I know there have been a few threads on this. I've read all of them but still slightly confused.
I have an HD2 (der) with a custom rom, HSPL, Magldr 1.13..
Basically, what in the world do I need to do to get it back to "stock". I installed a rom from the t-mo website for this phone. It loaded windows, yadda yadda. But I know it still had HSPL on it.
Also, do I need to flash to a certain radio?
So far it has HSPL, a new radio, and Magldr 1.13.
Im sorry if this is a redundant question.. I just want to make sure I get this right! This phone was doomed even when it had Windows 6.5 on it. I rather not have them tell me I was the one who ruined it because of Android.. Even though it was acting up before it.
Thanks guys..
If you have the HDSPL yet, you have to uninstall it by running HDSPL3 and selecting *.spl or *.0000
Did I answer to the question ?
Xura08 said:
I installed a rom from the t-mo website for this phone. It loaded windows, yadda yadda. But I know it still had HSPL on it.
Click to expand...
Click to collapse
because usb flashing doesnt change the spl (hspl), only the splash, rom and radio.
Either - flash it again from the sd card, or use hspl3/4 to reset the spl manually, , if you flashed 3.14 rom, choose spl 3.03.0000, else chooe 2.08.0000
samsamuel said:
Either - flash it again from the sd card, or use hspl3/4 to reset the spl manually, , if you flashed 3.14 rom, choose spl 3.03.0000, else chooe 2.08.0000
Click to expand...
Click to collapse
Ok, I'll download HSPL3 and flash it to spl 2.08.0000. This will look like it's stock to the technician, correct?
Also, I found this link (I apologize if I'm not suppose to post links like this, let me know and I'll remove it ASAP!)
http://theunlockr.com/2010/04/22/how-to-get-the-htc-hd2-back-to-stock/
Xura08 said:
Ok, I'll download HSPL3 and flash it to spl 2.08.0000. This will look like it's stock to the technician, correct?
Also, I found this link (I apologize if I'm not suppose to post links like this, let me know and I'll remove it ASAP!)
http://theunlockr.com/2010/04/22/how-to-get-the-htc-hd2-back-to-stock/
Click to expand...
Click to collapse
Yes. Correct. It is stock SPL. But, if you only flash it via HSPL, it will not flash the ROM itself. Your current ROM will remain. If you want to go back to original stock rom, you need to flash it again.
Cheers
Ok, here's what I did..
I downloaded the stock rom for my phone (using my IMEI number on the tmo website). I went into HSPL mode (the tri color screen) and then ran the .exe on the computer and it flashed it.
Currently, it's still running HSPL. If I flash HSPL to SPL 2.08.0000... This will look completely stock, correct?
Thanks for your help! I get to send this in today!
Also, the radio is 2.15.50. Is that stock... ?
Xura08 said:
Ok, here's what I did..
Currently, it's still running HSPL. If I flash HSPL to SPL 2.08.0000... This will look completely stock, correct?
Also, the radio is 2.15.50. Is that stock... ?
Click to expand...
Click to collapse
Yes that's right but it will be easy if you flash through sd card method it will write stock SPL ( you wouldnt do anything wrong if you install through hspl )... do do that just extract ruu you downloaded ( use 7-zip just search google its free) find ruu_signed.nbh and rename to LEOIMG.nbh copy to sd card and put in phone ... go into bootloader and follow instruction on screen.. and you are done.
But you alrady installed stock rom so to save time just put your phone into bootloader - tricolor screen connect to pc and run hspl and install stock spl
follow this link and download
http://forum.xda-developers.com/showpost.php?p=5279236&postcount=4
Thank you VERY much! I guess I'm just paranoid my $200 phone I got from craigslist will be deemed "rooted" and sent back to me with a nice "eff u" on the package from HTC.
The radio is now stock, everything is back to stock. SPL (no H) 2.08.0000. Yadda yadda.. It's still being a PITA.. so yes, I guess it is a hardware issue... yay for warranties!