Related
Here's my problem:
1) I had rooted my phone in the past.
2) I need to do a warranty return for a bad touchscreen and keyboard
3) I'm unable to flash back to stock because the home key is "stuck", so I can
only boot into recovery mode.
Is it possible to brick the phone so that it get stuck at the T-mobile loading screen before it default boots to the recovery screen?
If so, what is the most reliable way to brick my phone when all I have access to is the recovery mode?
fastboot flash a corrupt boot.img.
coolbho3000 said:
fastboot flash a corrupt boot.img.
Click to expand...
Click to collapse
That would be my first choice as well... except that I can only get to recovery mode, even when I hold down the camera button.
Closest thing I can do is flash an update.zip
my touch screen died today thank god for a trackball lol
g1junky said:
my touch screen died today thank god for a trackball lol
Click to expand...
Click to collapse
That's what I was thinking... I figure I'd just use my phone as-is until the replacement arrived, then I'd flash it back to stock before returning it...
If it's just a bad touch screen, they'll replace it without much fuss for next to free (just $10 shipping). Which is a very fair deal... unless you rooted your phone (boo!).
Then the home key got "stuck"... what bad luck... It's obvious when you turn it on that it's been rooted because of the custom recovery image... I'd rather make it a bit harder for them to determine my warranty's void instead of just having to turn it on.
@coolbho3000: I noticed that a boot.img file is included in some random update.zip (JFv1.3_RC8.zip) I just downloaded... Any idea what to hexedit on it to ensure it'll brick if I do an update through recovery mode? Or should I just pull the battery during the update (many times if need be)?
Update: I tried randomly screwing with the boot.img file using notepad++, but the damn phone won't use it for the update because the digest failed during the verification process. I also pulled the battery out during the part when it says it's writing the boot.img file (twice) without success -- although in this case, 'success' would be a bricked phone.
Why is this phone so hard to brick? Others just look at their g1 and can brick it...
I managed to brick my phone! It was harder than I thought (well, considering my many failed attempts), but here's how I did it:
I downloaded haykuro's 1.33.2005 special spl, renamed it to update.zip, and updated the g1 with it through the recovery panel. It's now permanently stuck at the T-mobile G1 screen. Worked for me, YMMV.
If that didn't work, my next two ideas were:
1) Very powerful magnet... high power speakers, or something else that puts out a lot of EM radiation (I'm sure I'd think of something). These things must have a low tempest rating.
2) Microwave (but that smells like desperation)
Hope this helps others in the same boat. I'll update with the bad news if they do, in fact, figure out I had rooted my phone anyways. I'm sure it's possible, yet probably unlikely. Otherwise, no news is good news.
Be glad you didnt have a custom spalsh image lol
Daemonjax said:
Here's my problem:
1) I had rooted my phone in the past.
2) I need to do a warranty return for a bad touchscreen and keyboard
3) I'm unable to flash back to stock because the home key is "stuck", so I can
only boot into recovery mode.
Is it possible to brick the phone so that it get stuck at the T-mobile loading screen before it default boots to the recovery screen?
If so, what is the most reliable way to brick my phone when all I have access to is the recovery mode?
Click to expand...
Click to collapse
Pretty simple. First do a recovery to factory settings using the camera and the start button. then copy the latest SPL from this website,
in the instructions it says that you have to flash the latest radio first, don't do that, just flash the SPL... reboot, voila, you have just successfully BRICKED ur phone..
Daemonjax said:
1) Very powerful magnet... high power speakers, or something else that puts out a lot of EM radiation (I'm sure I'd think of something). These things must have a low tempest rating.
2) Microwave (but that smells like desperation)
Click to expand...
Click to collapse
Magnets don't emit electromagnetic radiation -_-;;
A much easier way would just be to take a moderately high dc voltage (say ~48v) and fry part of the processor.
Daemonjax said:
I managed to brick my phone! It was harder than I thought (well, considering my many failed attempts), but here's how I did it:
I downloaded haykuro's 1.33.2005 special spl, renamed it to update.zip, and updated the g1 with it through the recovery panel. It's now permanently stuck at the T-mobile G1 screen. Worked for me, YMMV.
If that didn't work, my next two ideas were:
1) Very powerful magnet... high power speakers, or something else that puts out a lot of EM radiation (I'm sure I'd think of something). These things must have a low tempest rating.
2) Microwave (but that smells like desperation)
Hope this helps others in the same boat. I'll update with the bad news if they do, in fact, figure out I had rooted my phone anyways. I'm sure it's possible, yet probably unlikely. Otherwise, no news is good news.
Click to expand...
Click to collapse
You didn't have to hard brick it like that you know. There are other ways which will convince the warranty people just as well. Now it's really bricked.
hmmm well this was my idea....if my phone ever goes wrong or sumthing.... i will just crack the screen lol. so they cant see if what software was on my phone...
the easiest thing to do is flash the danger spl before flashing the radio if u havent flashed the Danger SPL already. If u did, just flash an older SPL. That should do the trick
nephron said:
the easiest thing to do is flash the danger spl before flashing the radio if u havent flashed the Danger SPL already. If u did, just flash an older SPL. That should do the trick
Click to expand...
Click to collapse
Or if you already have Haykuro's SPL just downgrade your radio hehehe
nephron said:
the easiest thing to do is flash the danger spl before flashing the radio if u havent flashed the Danger SPL already. If u did, just flash an older SPL. That should do the trick
Click to expand...
Click to collapse
So if you have the danger/haykuro spl and want to downgrade that spl for w/e reason the phone will brick??? or are you trying to tell him to downgrade the radio?
turboyo said:
So if you have the danger/haykuro spl and want to downgrade that spl for w/e reason the phone will brick??? or are you trying to tell him to downgrade the radio?
Click to expand...
Click to collapse
If you use Haykuro's "Danger SPL" and will try to downgrade the radio, it should brick the phone for good.
Even if your camera button is broken you can still get to fastboot through ADB. Just open an adb shell (doesn't matter if it is recovery or not) and type:
#restart bootloader
and voila - you can get into fastboot mode and flsh whatever you want.
brian_v3ntura said:
hmmm well this was my idea....if my phone ever goes wrong or sumthing.... i will just crack the screen lol. so they cant see if what software was on my phone...
Click to expand...
Click to collapse
thats dumb as hell cuz if u crack ur screen u have to pay $130 deductable well at least in USA and if u send it back with out telling them the screen cracked u get to pay $370 restocking fee but ifd u just brick with spl u get free replacement just pay shipping which im about to do cuz my phone was ****ing up and i got replacement sent(20 bucks shipping thats it) but magically i fixed the phone but its rooted and fully working again so if new phone is PVT board then im bricking my phone and keeping new one.
I need help
Hey people I have a cracked G1 screen and a rooted firmware, I want to get a free warranty replacement by saying that the "Update Failed" and act like a total idiot to the tmobile people..
I also have Haykuro's latest radio and latest SPL, can someone give me clear guaranteed instructions on how to brick my fine cracked friend?
Oh, and I also want to make sure that the TMOBILE people cant go to cyanogens 1.4 Recovery image after this thing is bricked, so AANNY help would be appreciatede
housecat93 said:
Hey people I have a cracked G1 screen and a rooted firmware, I want to get a free warranty replacement by saying that the "Update Failed" and act like a total idiot to the tmobile people..
I also have Haykuro's latest radio and latest SPL, can someone give me clear guaranteed instructions on how to brick my fine cracked friend?
Oh, and I also want to make sure that the TMOBILE people cant go to cyanogens 1.4 Recovery image after this thing is bricked, so AANNY help would be appreciatede
Click to expand...
Click to collapse
Grab the RC29 file, name it DREAIMG.nbh, and flash via the bootloader. Since that will downgrade the radio to the 1.1 version, you will no longer have the 1.5 radio that 1.33.2005 requires
This has got to be the funniest topic I've read in awhile.
Good luck to all you seeking bricked phones. Haha.
Went to the new radio sent out by Flipz. Flipz you are great and all but the radio is not working out for me. I want to degrade back to the original. Suggestions.
You JUST made a topic about this.
TheBiles said:
You JUST made a topic about this.
Click to expand...
Click to collapse
I know I did. I tried to erase and make a my point a little bit more understandable. My bad.
yea give it a day or so to familiarize itself with your system and towers etc. i dont see how all these people are getting terrible results from it....and its not that hard to go back just ruu
You see I have tried to use the RUU wizard set up thru fresh. When I tried it I got an error.
there was a post a few days ago with the old radios in an update.zip format that you could flash from recovery, have you tried using that to downgrade yet?
Please read the following threads before trying anything. That way you are fully prepared.
http://forum.xda-developers.com/showthread.php?t=645002
http://forum.xda-developers.com/showthread.php?t=645435
http://forum.xda-developers.com/showthread.php?t=643796
http://forum.xda-developers.com/showthread.php?t=600720
http://forum.xda-developers.com/showthread.php?t=644417
http://forum.xda-developers.com/showthread.php?t=644004
People told me to flash the original radio in the same manner as the updated radio in nandroid. It did not work. Then they told me to RUU, that bricked or now semi-bricked my phone. I just think you should be prepared before you do anything. Running the RUU apparently does not work as well as some people think it does.
marcusva79 said:
Went to the new radio sent out by Flipz. Flipz you are great and all but the radio is not working out for me. I want to degrade back to the original. Suggestions.
Click to expand...
Click to collapse
What are your specific problems/issues with it?
crash447 said:
Please read the following threads before trying anything. That way you are fully prepared.
http://forum.xda-developers.com/showthread.php?t=645002
http://forum.xda-developers.com/showthread.php?t=645435
http://forum.xda-developers.com/showthread.php?t=643796
http://forum.xda-developers.com/showthread.php?t=600720
http://forum.xda-developers.com/showthread.php?t=644417
http://forum.xda-developers.com/showthread.php?t=644004
People told me to flash the original radio in the same manner as the updated radio in nandroid. It did not work. Then they told me to RUU, that bricked or now semi-bricked my phone. I just think you should be prepared before you do anything. Running the RUU apparently does not work as well as some people think it does.
Click to expand...
Click to collapse
So I am gonna take it from you man. I am pretty sure someone out there over the rainbow will make one to degrade the radio. i will settle with the radio for now, since I have no choice, well I already tried to use the RUU wizard, good thing I made a nandroid backup.
raadio flash is different than a regular flash nandroid wont get ya back to an older one
crash447 said:
People told me to flash the original radio in the same manner as the updated radio in nandroid. It did not work. Then they told me to RUU, that bricked or now semi-bricked my phone. I just think you should be prepared before you do anything. Running the RUU apparently does not work as well as some people think it does.
Click to expand...
Click to collapse
The problem is you are trying to use nandroid to flash an update.zip.
The radio will come as an update.zip format. Flash it like you would a new rom through recovery.
Nandroid does nothing for radio flashing. You can literally fry the phone's motherboard by flashing the wrong radio, I would know seeing as I did it to my first phone. lol
nbroneobi said:
raadio flash is different than a regular flash nandroid wont get ya back to an older one
Click to expand...
Click to collapse
I know that. Must be tired or something cause I am typing all weird. I did a nandroid recovery before I did the RUU wizard. And I glad I did. Cause I almost bricked my telefono.
willowmp said:
The problem is you are trying to use nandroid to flash an update.zip.
The radio will come as an update.zip format. Flash it like you would a new rom through recovery.
Nandroid does nothing for radio flashing. You can literally fry the phone's motherboard by flashing the wrong radio, I would know seeing as I did it to my first phone. lol
Click to expand...
Click to collapse
Maybe I shouldnt really do anything with the radio and just live it out with 2.1. I kinda of scared to fry or brick anything.
marcusva79 said:
I know that. Must be tired or something cause I am typing all weird. I did a nandroid recovery before I did the RUU wizard. And I glad I did. Cause I almost bricked my telefono.
Click to expand...
Click to collapse
how did making a nandroid recovery save you from bricking your phone??
okay so on the thread with the radios that Avalaunchmods posted, there was an error in the way he had his stock radio.img flash onto the phone. i'm attaching a signed stock radio that should flash correctly.
it SHOULD work. i don't see why it wouldn't work, because it is a CDMA radio and what it would do is just rewrite the old radio over the new radio. so i don't see a problem with this bricking any phones. but i don't take any liability if something goes wrong.
Just verify that you have the correct radio, and make sure it is coming from the CDMA Hero section and not the GSM section.
The real danger comes from flashing a GSM radio onto a CDMA hero. If you do this you will watch your phone kill itself.
I believe the radio was posted, though you could get it out of the RUU I think? Then you'd just need to request someone sign the zip and use it as an update.zip from recovery.
i took that radio.img from Avalaunchmod's thread. the radio that he got that out of was from the RUU, so yes, this is definitely a CDMA radio and its from the RUU.
justinisyoung said:
how did making a nandroid recovery save you from bricking your phone??
okay so on the thread with the radios that Avalaunchmods posted, there was an error in the way he had his stock radio.img flash onto the phone. i'm attaching a signed stock radio that should flash correctly.
it SHOULD work. i don't see why it wouldn't work, because it is a CDMA radio and what it would do is just rewrite the old radio over the new radio. so i don't see a problem with this bricking any phones. but i don't take any liability if something goes wrong.
Click to expand...
Click to collapse
Anyone want to try this. ARRRRRhj
just do exactly what you did to get the newer one on
justinisyoung said:
how did making a nandroid recovery save you from bricking your phone??
okay so on the thread with the radios that Avalaunchmods posted, there was an error in the way he had his stock radio.img flash onto the phone. i'm attaching a signed stock radio that should flash correctly.
it SHOULD work. i don't see why it wouldn't work, because it is a CDMA radio and what it would do is just rewrite the old radio over the new radio. so i don't see a problem with this bricking any phones. but i don't take any liability if something goes wrong.
Click to expand...
Click to collapse
Anyway to try this without nandroid. Since I am stuck in the "semi-bricked" limbo "fastboot oem boot" state.
justinisyoung said:
i took that radio.img from Avalaunchmod's thread. the radio that he got that out of was from the RUU, so yes, this is definitely a CDMA radio and its from the RUU.
Click to expand...
Click to collapse
Lol you posted before I finished my post.
Hi,
Already posted part of the situation in Amon_RA's recovery thread but neither of the answers there seem to solve my problems. Decided to post it here since the problem seems to involve aspects other than the recovery itself.
Here's the complete situation:
Had problems with RA recovery freezes since the start and with different versions. I could (and can) enter recovery mode (v1.6.2), scroll down the options but after 15 seconds the recovery just freezes and reboots every single time. Checked the version (H) and the MD5, they where all correct. Tried cm-recovery-1.4-32A and it seems to work fine but when I flash a ROM (1.6) I have similar problems with the ROM (freeze+reboot in "touch droid setup"). Curiously I flashed my hero 2.0.5 (1.5) and had no problems...
Tried booting the latest RA recovery trough fast-boot and it worked fine the first two times I did it (scrolled down the options for like 10 minutes and it didn't freeze). After that it did not work and got the freezes+rebooting problem back again. Tried ADB, Flash-rec and flashed the recovery but got the freeze+reboot problem once again. Re-checked the version and MD5 and they where all correct.
Why does this happen? Any clues?
Thanks for your help!
I'm kind of lost here...Could it be a radio or SPL problem? Should I re-flash/update it? I never had problems with the stock ROM so this situation is really odd...
Can anyone help?
Thanks in advance!
strange... try some random methods here lol (I don't know if they'll work though but it can't hurt)
First, try flashing an ENG SPL, see if that makes a diff
If that fails, try flashing a whole new ROM/RADIO/SPL
for example: Since you're a 32A user, I believe you can flash the 6.35.x radio and the 1.76.2007 SPL and then use the hero recovery. Test out a rom on the new radio for like a day and try out the recovery. See if that freezes! (This doesn't really accomplish much though because even if it doesn't freeze, i think you'll wanna go back to the old radio to try out other roms lol. You risk bricking your phone if you don't understand this stuff so don't do it if that's the case)
But anyways, I'm a bit confused. What rom are u using?
noroses said:
Hi,
Tried cm-recovery-1.4-32A and it seems to work fine but when I flash a ROM (1.6) I have similar problems with the ROM (freeze+reboot in "touch droid setup"). Curiously I flashed my hero 2.0.5 (1.5) and had no problems...
Click to expand...
Click to collapse
So you can use the recovery fine, until you flash a rom? So when you flash a rom, your recovery beings to freeze. But when you flash a different rom, your recovery works fine? Weird. Sounds like a problem when you're flashing a rom...
I have no idea dude but what I would do if I was in your situation:
1) Flash ENG SPL, something like 1.33.0010 (double check everything, i dont like advising people to play with their spl/radio so dont just take my word)
2) load up recovery and give it a try! if all that fails...
3) I'd backup your phone via nandroid in recovery (i pray that it doesn't freeze lol)
4) Wipe wipe wipe
5) Go into fastboot, fastboot erase system -w and then try another rom! And if the rom is good, then go back to your old one. Try to find out what the prob is.
It appears that you're able to flash roms still even with your recovery freezing (so weird) so I dunno. Just give it a try I guess lol
very weird indeed.... question.. does this do this when plugged in as well as on battery? ive heard of some really weird issues with bad batteries....
i would try what kawata recommended as well.. kind of just a process of elimination...
hopefully you dont have a hardware issue..
Hi,
strange... try some random methods here lol (I don't know if they'll work though but it can't hurt)
First, try flashing an ENG SPL, see if that makes a diff
Click to expand...
Click to collapse
Will try this. Can I flash the SPL trough the recovery?
If that fails, try flashing a whole new ROM/RADIO/SPL
for example: Since you're a 32A user, I believe you can flash the 6.35.x radio and the 1.76.2007 SPL and then use the hero recovery. Test out a rom on the new radio for like a day and try out the recovery. See if that freezes! (This doesn't really accomplish much though because even if it doesn't freeze, i think you'll wanna go back to the old radio to try out other roms lol. You risk bricking your phone if you don't understand this stuff so don't do it if that's the case)
Click to expand...
Click to collapse
Will have to check and recheck this complex process.
But anyways, I'm a bit confused. What rom are u using?
Click to expand...
Click to collapse
Now I'm using stock 1.5. I tried cyanogen, superD and other 1.6 Roms and they all freezed at the android setup process. Used myhero for a week with no problems whatsoever. Since I have a nandroid backup done with CM's recovery I restore everything back as it was.
So you can use the recovery fine, until you flash a rom? So when you flash a rom, your recovery beings to freeze. But when you flash a different rom, your recovery works fine? Weird. Sounds like a problem when you're flashing a rom...
Click to expand...
Click to collapse
The Amon_Ra recovery freezes every time. It doesn't give me enough time to do anything...Now I'm using CM's recovery and I have no freezing problems while in recovery mode. The problem is after I flash a Rom and reboot. The ROM experiences freezing problems (just like the Amon_Ra's recovery).
Thank you for your answer and suggestions!
digitaljeff said:
very weird indeed.... question.. does this do this when plugged in as well as on battery? ive heard of some really weird issues with bad batteries....
i would try what kawata recommended as well.. kind of just a process of elimination...
hopefully you dont have a hardware issue..
Click to expand...
Click to collapse
Hi,
Thanks for your answer.
I have never tried with the phone plugged into a socket but did it with the phone running on battery and connected via usb to the computer. Should it make a difference?
Could it be a hardware problem? I never had problems with the stock ROM or with the myhero ROM...
it could be hardware...
if you want to flash to new radio and spl please follow this guide to the T or else you will get a brick, you cannot flash radio and spl via recovery.
so...
follow this guide and all will be good... must have adb ....
http://forum.xda-developers.com/showthread.php?t=605239
digitaljeff said:
it could be hardware...
if you want to flash to new radio and spl please follow this guide to the T or else you will get a brick, you cannot flash radio and spl via recovery.
so...
follow this guide and all will be good... must have adb ....
http://forum.xda-developers.com/showthread.php?t=605239
Click to expand...
Click to collapse
Checked that guide but I'm unsure about this part:
If you do not have an Engineering SPL, download 1.33.2010 and flash through recovery before starting this procedure. Flash the SPL update.zip like any other update.zip file.
Click to expand...
Click to collapse
This part I can do within the recovery to enable flashing via fast-boot right?
yup you can flash the eng spl via recovery ... i should have been more specific and said you cant flash new radio and spl via recovery
for the new radio,spl and recovery you do through fastboot
good luck
digitaljeff said:
yup you can flash the eng spl via recovery ... i should have been more specific and said you cant flash new radio and spl via recovery
for the new radio,spl and recovery you do through fastboot
good luck
Click to expand...
Click to collapse
Will try that tomorrow.
Thanks for your help!
digitaljeff said:
very weird indeed.... question.. does this do this when plugged in as well as on battery? ive heard of some really weird issues with bad batteries....
i would try what kawata recommended as well.. kind of just a process of elimination...
hopefully you dont have a hardware issue..
Click to expand...
Click to collapse
Hi again,
Still didn't mess with SPL and Radio. I'm still afraid I'll brick the phone..However yesterday tried a few simple things like using another sd card or entering recovery while plugged in. These two things seem to influence the behavior of the latest Amon_RA recovery but don't solve my problem completely. Example: When I enter recovery using the original SD card (2gb) the recovery would freeze within 20 secs max. Using another SD card (128mb) most of the times it would take longer to freeze (4 or 5 minutes). Sometimes it would not freeze at all. Although this seemed to influence what happened it wasn't constant and could not find a pattern. The same with the phone plugged into computer. Sometimes it helped. One thing is certain: with the original SD card and unplugged from the computer the recovery freezes within 20 secs every single time.
With the CM 1.4 recovery never had any freeze problems. It seems to work great while in recovery mode. The problem is after a flash a ROM I have freeze problems with the ROM itself (tried different ROM's, CM, SuperD, etc and got the same freeze problem). The only Rom that worked fine was myhero 2.0.5.
This is a very strange situation and I'm starting to think that this could be hardware..
Would that be a SD card problem?
try using another SD card and see if the problem still occurs
I am having exactly the same problem, did you ever find a solution?
Went from a fully updated magic 32A (1.76.0009H) now i'm at 1.76.0008
UPDATE: I just found that the hero recovery works (I would post link but xda doesn't allow new users to do that) however it may still be necessary to downgrade radio and spl
I had also same problem. My device is Magic 32A radio 6.35. Solution was to reflash recovery-RA-hero-v1.6.2.img.
Ive rooted before but im trying to root a friends device...It's been a while since ive rooted mine so I was freshening up how to do it again. I followed the steps all the way to flashing the SPL...My friend was on android 1.6 with build number DMD64. I reverted to RC29 to root and when flashing the SPL...i flashed dangerspl in recovery. I rebooted and now it does not go past the G1 logo...i tried fastboot and boot into recovery but unsuccessful. Is this a brick? I'm really hoping not...any help would be appreciated, thanks.
Did you make certain the radio was up to date? Old radio with danger spl = brick. Sorry. If that's the case, your only option will be JTAG, which is a rather complex procedure.
I could have been certain that the radio was 2.x but not 100%. My friend's phone was at 1.6 before the reverting to rc29. Does reverting rc29 also revert the radio to 1.x?
Deadbolt said:
I could have been certain that the radio was 2.x but not 100%. My friend's phone was at 1.6 before the reverting to rc29. Does reverting rc29 also revert the radio to 1.x?
Click to expand...
Click to collapse
No it shouldnt, can you get into recovery mode? if you can then just flash the rom again and it should work just fine.
As far as I know, DREAIMG.nbh contains ROM, radio, recovery, SPL and splash screens. So yes, I'm 99% percent sure it downgraded your radio.
If that's a case, then you have nice brick.
Why do you ppl still bother with Haykuro? SafeSPL + MTD Partition Hack is the way to go!
raven_raven said:
As far as I know, DREAIMG.nbh contains ROM, radio, recovery, SPL and splash screens. So yes, I'm 99% percent sure it downgraded your radio.
If that's a case, then you have nice brick.
Why do you ppl still bother with Haykuro? SafeSPL + MTD Partition Hack is the way to go!
Click to expand...
Click to collapse
If the dreaimg.nbh file does downgrade the radio then i'm probably sol. It was my fault as I should've gone with the original hardspl before flashing the dangerspl right away. But I didnt think rc29 would downgrade the radio, thought it'd be safe.
Anyone know or know anyone that can do the jtag hack and try to recover the bricked G1? I looked up jtag and it sounds quite complicated to do myself. If anyone can do it, ill even pay a small fee for someone to do it. Thanks.
I have a question about this too. I too find myself in the same situation but i did not try to flash the dangerSPL. I was rooting and after i flashed hard spl and rebooted i got stuck on the G1 screen...I cant load into recovery or normal or even fast boot. Did i really just brick my phone? any help would be cool
Bottom Line....
Out of all the post, no one seems to give a straight answer. HTC G1 frozen on the bootup screen (T..Mobile G1 screen). Can the phone be fixed or NOT? If it can, how is this done? (factory G1)
If you can boot into Recovery (Home + Power) or Fastboot (Camera + Power) you can recover your phone. Otherwise you need to use JTAG, which with the right knowledge can recover just about anything. I'd search craigslist or similar sites for people that offer JTAG services. Every now and then an XDA member might offer it, but that would be in special circumstances, considering that there are a lot of people who might need it done.
funkeee said:
If you can boot into Recovery (Home + Power) or Fastboot (Camera + Power) you can recover your phone. Otherwise you need to use JTAG, which with the right knowledge can recover just about anything. I'd search craigslist or similar sites for people that offer JTAG services. Every now and then an XDA member might offer it, but that would be in special circumstances, considering that there are a lot of people who might need it done.
Click to expand...
Click to collapse
is it possiable for one to purchase said jtag hardware, and run the software on ones computer??
xxcrashxx said:
is it possiable for one to purchase said jtag hardware, and run the software on ones computer??
Click to expand...
Click to collapse
You'll also need to open up the phone and solder wires to the circuit board.
Hi, after hours of researching to find the problem, i cant find it so as my last resort i will ask the mighty forums if there is anything they can do about it.
The problem is that its stuck in a boot loop, i can get in to bootloader and Hboot.
When i press to go in to recovery its just goes to the HTC logo and stays there.
When i try to do a factory reset same thing happened.
Anyway, the facts.
Its a DHD it used to have leedroid latest as rom, atm i have no idea it is supposed to be 1.32 stock rom for rooting and RADIO-26.14.04.28_M, kernel was also leedroid recommended but i guess that also is 1.32 stock.
It was ENG S-OFF but then i tried some PD98IMG and it changed to SHIP S-OFF
Things that i have tried.
Tried different PD98IMG to get the recovery working but nothing same thing happened there.
Tried patched/flashed the recovery part only with no luck.
Tried to get into recovery through pulling the battery inserting the usb and then inserting the battery again, no luck.
The odd thing is when i try to charge the phone and the led goes orange and when i pull the usb out it stays orange, it should turn off.
I suppose i ****ed something over but i have no clue of what that is?!?
Help would be most appreciated
I'm suggesting everyone to give this method a try although i have no experience with it but since it can be used to recover using computer i believe recovery isn't necessary here so that you can recover the firmware using the PC.
Hope this helps
shad0wboss said:
I'm suggesting everyone to give this method a try although i have no experience with it but since it can be used to recover using computer i believe recovery isn't necessary here so that you can recover the firmware using the PC.
Hope this helps
Click to expand...
Click to collapse
Done and failed, same problem no difference what so ever.
SHIP S-OFF is OK!! U got it m8!
If you want to use your own Image do it within this way:
1. Flash this: http://www.multiupload.com/FKJ8B7Q0QM
and after this:
2. Flash this: http://www.multiupload.com/AURLLESU5V
And enjoy it! I don't know why the PD98IMG is not working on your device so I recomend to flash the RUU. Within the RUU you will also get the latest firmware for phone and wifi and so on. It's not a need, it's a must!
The 2nd ROM is same as above but it's ROOTED and contains the 4ext Recovery which will give you the option to flash whatever you want.
BUT!!! This ROM's are ORIGINAL. If you want to use a CUSTOM ROM I would recomend you will format your device by the 4ext Recovery or you are using the FULL WIPE 1.5.
Regards!
Sorry for the insane delay.
That did not work either, anyone else have any idea what to do, installing through PD98IMG.zip files seams not to work, will at this point do anything.
I'am a student so buying a new one is out of the question.
I tend to have to see things to understand them more. Maybe other people are similar. Is it possible you can video the process, put it on YouTube and some of the experts here can see it and talk you through it?
Grant Barker said:
I tend to have to see things to understand them more. Maybe other people are similar. Is it possible you can video the process, put it on YouTube and some of the experts here can see it and talk you through it?
Click to expand...
Click to collapse
Dude, I plus 1 this comment.
Doing exactly that has helped me in the past too.
Well, i am here again with some videos this time, dont really know if it will explain anything but here goes nothing.
youtube.com/watch?v=cHA-k6SadoE
Just a simple start to show what the hell is wrong with it.
youtube.com/watch?v=squwhiGNM3s
Here's me trying factory reset but failed, stuck at the same place as before.
youtube.com/watch?v=aZF1ALz0Z-w
Here is where i go into fastboot, just to show that i can do it and then back again to try recovery, same problem...
Anymore info you need, next time i will answer much faster, anyway there the problem it gets stuck on HTC logo forever, no restart no nothing...
ithen said:
Sorry for the insane delay.
That did not work either, anyone else have any idea what to do, installing through PD98IMG.zip files seams not to work, will at this point do anything.
I'am a student so buying a new one is out of the question.
Click to expand...
Click to collapse
when you flashed PD98IMG.zip does it give you a cid error?. If this is the error then a gold card needs to be made for your device first, then you flash the RUU.
Back again.
No CID error, its skips something called TP when i try to flash it.
I can use any simcard, its an unbranded phone i believe.
And also if it is to any help, when i plug my charger in the phone and then back out again, the little orange led keeps emitting light, as if it stills charging.
My English is not very good.
I want to know what did you do for it before its stuck in a boot loop?
You can get into HBOOT and connect the phone to the computer,then try to run RUU.Before you do this,make sure you have make golden card.
Try another pd zip..i came across a few corrupt ones,the answers in this site somewhere alterbatively google the sentence you want the answer to..or the key words,if the systems still working theres a 98% chance youll get it going boot loops from what i see are just a file or something causing chaos..once its gone voila.
Good luck
Sent from my Desire HD using XDA Premium App
Enter hboot and paste exactly what it says in there.
SHIP AND ENG don't matter as long as it's S-OFF. If you can't access recovery and if you're unable for some reason to flash a PDimg, download AAHK and use it to unroot. That will hopefully get you into the stock ROM and S-ON of course.
Use AAHK again to root. You will still have access to your stock ROM.
Now here's the tricky part. If the phone won't boot at all that probably means there's nothing to boot at all. Happened to me a lot of times. If you can still get into hboot then don't panic. See if AAHK will help you out.