Related
I am connected to T-Mobile Internet (HSDPA) and I ran a speed test at www.dslreports.com/mspeed but I only got 395kbps, 0.324s latency. Why so slow?
That speedtester is rubbish - I once got 250k on wifi.
arfster said:
That speedtester is rubbish - I once got 250k on wifi.
Click to expand...
Click to collapse
can you recommend a better one?
i've just found out that t-mobile doesn't activate HSDPA unless you call up CS and ask them to enable it. some people have been told that you have to be on web n walk pro to have HSDPA whereas others have had it added free of charge.
http://www.3g.co.uk/3GForum/archive/index.php/t-45508.html
but one thing is still confusing me... the H is displayed at the top of my screen when I use the data connection. and when I click on it it actually says HSDPA. what's going on?
try http://www.thinkbroadband.com/speedtest.html via your laptop. much better and accurate
if you have the H - then you are def on it. If it was just 3G it would say 3G. But bare in mind that T Mobile HSDPA has been dreadful for nearly a month. It gets so bad that I am considering asking them to release me from contract for violating terms of service. I pay for HSDPA as advertised and I dont get it.
I had web&walk previously and I managed to get full speeds for a while. Once I have reduced my call plan(not data) the speeds were down to 300kbps and less. On these occations, I would still see H as the indication but sure they were capping it on the network.
reopening old thread
I've got H and my provider allows speed up to 7.2/2mbps, but for long time (few months) testing I never get speed higher than about 2.4/0.3 Mbps. I've tested on computers via USB cable and on two different locations both about 500m from antenna.
My provider say that I have all set up correctly and doesn't know why speed is 'so slow'.
reopening old thread
I've got H and my provider allows speed up to 7.2/2mbps, but for long time (few months) testing I never get speed higher than about 2.4/0.3 Mbps. I've tested on computers via USB cable and on two different locations both about 500m from antenna.
My provider say that I have all set up correctly and doesn't know why speed is 'so slow'.
Which provider? Mobitel or Si.mobil? I have Mobitel, and it's true, that it isn't always as fast as it should be - in centre of capital city...
My ISP is T2, unlimited for 10€. It's not listed on this forum settings dropdown menu
What max speed do you get with Mobitel provider and HTC HD
feeltch said:
My provider say that I have all set up correctly and doesn't know why speed is 'so slow'.
Click to expand...
Click to collapse
Nearly everywhere 7.2mbit hspa is a myth - the only way you can get it is if nobody else is using the celltower.
A very reliable speed test application is: http:www.mobilespeedtest.com.
The dsl.reports app (on my HD) provides non accurate results.
The more people using a HSDPA or 3G celltower - the slower your speeds get.
Trust me - I've done all the testing from a corporate perspective - HSDPA 7.2 is a myth - you'll never get that speed - its more like 3.2mb/s MAX!. On 3G the average bandwith is about 300kb/s - but only on a good day.
hth
feeltch said:
My ISP is T2, unlimited for 10€. It's not listed on this forum settings dropdown menu
What max speed do you get with Mobitel provider and HTC HD
Click to expand...
Click to collapse
I'll test and report tonight, when I'm on a good HSDPA signal covarage!
yo compatriot , have you manage to test the speed yet?
With www.mobilespeedtest.com it managed to get 3Mbit downstream in Ljubljana-Vič, haven't tried Centre yet. For normal browsing and download of some small files it's ok. I'll report if I get better bandwidth!
With www.mobilespeedtest.com:
- I get a 2.37 Mbps speed test result on the 3 MB file(biggest) while connected from my mobile to a HSDPA 3.6 network which allows for a max 1.1 Mbps speed.
- I get a 2.4 Mbps speed test result from my computer while connected on a 15 Mbps ADSL - yes - I do 1.7 MBytes/sec transfers all the time - careful at the units of measurement!
- on smaller than 3 MBytes file size, the results are just random
www.mobilespeedtest.com is FAKE
The flow of the web pages has been so severely thrashed by ISP filters its not reliable to real testing anymore.
Stop.Calling.Any.Web page.A.Speed.Test.
Ping flood is designed for real measuring a line speed, but most ISPs have scripts which will ban you automatically if you sent packets faster than with a delay of 0.02 seconds. That is because is too much prone to abuse.
Ok so I did some reading and the past and I had confirmed that there wasn't 3G bands that supported T-Mobiles 3G on the phone so I had always disabled the 3G. Well recently I got a TM506 and started tethering that to my phone/laptop while on vacation and ran some speed tests getting around 7000kbps | 7.57Mbps | 968.75KB/sec (tested on www.mobilespeedtest.com). Today I was playing with my Xperia again, flashing new roms and deciding to keep it, was frusterated that wifi was slow. Just opened up a browser and noticed it loaded rather quickly... Ran a speed test and it was roughly 7000kbps | 7.57Mbps | 968.75KB/sec which is similar to what I had on my TM506 which is offically a T-Mobile 3G phone.
Can I come to the conclusion I am gettnig 3G on the phone? It seems like it. I ran multiple speedtests and the same speeds are being produced. Can anyone shed some light and help me be able to confirm this fully?
It's pretty obvious if you have a 3G connection, as a little "3G" box appears in the top menu bar (same place there is a "E" box for an EDGE connection).
So your saying if I don't get the "3G" on top but speed tests show differently then it can't be 3G? Doesn't seem to be very accurate to me....
if your using an X1a, then yes you most likely are hooked up to tmobile's 3G..about the 3G icon not showing up..if its a custom rom..i kno in some of this roms the 3G icon is sometimes disabled so you might wanna check in advanced config to see if its enabled or not..
I am on a X1i, with Jacks 3.0 Medium Rom. Just flashed .10 radio as well. 3G is enabled as well. Hope this stays as it might become useful for others that are on T-Mobile as they might be able to get 3G now.
I get very optmistic results from mobilespeedtest.com, try a few other testing sites or even better a large download for real world speeds. If you are getting more than 380 kbit/sec you must have HSDPA and should have the H icon (unless it has been disabled)
Where are you located?
North Dallas, tx. Near frisco. I tested in Denton, Lewisville, The Colony and Frisco. All supposedly 3G speeds.
Neither the X1i or X1a runs on TMO's 3G network as TMO requires two bands for 3G to work.
Are you sure you're not just connected to wifi?
ya. wifi is turned off. And I ran a check with wifi, it gave me roughly 3mb down but with without its 7mb down... could just be the site isn't reliable... i waitng to tether to my laptop to check speedtest.org
If you're using the epc.tmobile.com APN, it's likely the speed test is being accelerated by the gateway, especially if the results are calculated by the website and not the phone.
yeah.. I finally got wifirouter and set it up with my laptop and went to speedtest.net which to me is more accurate and i was only getting ~200kb down. Better than what I had before so I'm actually happier now. Just wished it was the real 3G. :| of well.
Here is some strangeness that I'd like to investigate.
When I'm on a voice call, data usage is strangely inhibited even when on Wifi. The market will report network errors, and when it does download an app, it will never install the app while on the call. Other apps that use data are either non-responsive or extremely slow. For example, the Engadget app will display text, but not images. As soon as the call is ended, all returns to normal. Again, this is not over 3g/4g, but Wifi enabled and active.
As an additional datapoint, over the same Wifi network, my laptop gets 12.63Mb/s down and 1.36Mb/s up while my Atrix gets 2.4Mb/s down and 1.4 Mb/s up.
Is anyone else having reduced and/or null data traffic while on voice, even on Wifi?
speedtest seems fine for me on WiFi. Not quite the max bandwidth.... my connection is 15Mbit down and it comes in around 9... but not bad either way. Upload bandwidth seems right about where it should be on WiFi.
As for the data use while on call.... i dunno. Never used it when i used my iPhone that i can remember.... and haven't had my Atrix long enough to even think of doing so, so i wouldn't know about that one.
Well I haven't tested data use while on a call, but as for the wifi data speeds...I've never once used a phone that received as fast a wifi signal as this one. My home modem usually connects at around 15.5Mbps. My phone speedtests on WiFi at 13-15Mbps. That's *amazing* for a phone.
I have had my SGSII for about 6 weeks now. Running it on the Telstra Next G network.
The problem is I am having a shocking internet experience.
My experience is based after coming from the HD2 running Android.
I have had the network freeze a few times. This is identified by the traffic arrows stay stuck. Airplane mode and back resets.
Basically cloud based apps like Market, Maps etc takes ages (60s-5mins) to start up. Kill and re-launch is quick).
Lots of network errors in Google Market.
Lots of Server unreachable errors in Emails (Pointing to exchange 2007)
I have updated the APN details to use Telstra.internet.
Great reception at home and work.
Calls and SMS's are fine.
Ideas? Waiting to see the Cyanogen rom. Wondering if my experience is due to Kies or another program getting involved with internet.
Any ideas please. My HD2 ran with the same Sim and worked like a rocket. No such issues.
Have you tried turning fast dormancy off? I'm on the Optus network, but I found with fast dormancy on I was getting unreliable internet (market would timeout a lot, doing installs/updates would fail straight away, etc). When I turned it off, I got better speeds and the connections were reliable.
Turn fast dormancy off:
1. In dialer - *#9900#
2. Select Disable fast dormancy
no such issues for me, using a vodafone branded handset. The only thing is that it will occassionally use 3telstra instead of telstra, in which case i need to manually select the network. a bit of a pain but not 2 bad
flagger said:
Have you tried turning fast dormancy off? I'm on the Optus network, but I found with fast dormancy on I was getting unreliable internet (market would timeout a lot, doing installs/updates would fail straight away, etc). When I turned it off, I got better speeds and the connections were reliable.
Turn fast dormancy off:
1. In dialer - *#9900#
2. Select Disable fast dormancy
Click to expand...
Click to collapse
Thanks, will try. what does fast dormancy do?
Found this as well
http://forums.whirlpool.net.au/archive/1713536
Looks like it speeds up connection ramp up and down.
Found this on
http://forums.whirlpool.net.au/archive/1714413
****************** FIXED ******************
After contacting Samsung for an insane period of time (ended up on an international call to England i think... or now that i think about it could have just been some English guy in Aus lol) I have got an official explanation and confirmation that this issue is being looked into for KE8 (but it appears that KE8 has been launched in India already so it might be KE9).
*disclaimer*
I am no expert on mobile technology this in-depth however the (probably very) dumbed down version the Samsung guy told me was this;
*end disclaimer*
The problem stems from the fact that this phone has 3 forms of data connection, 3G, HSDPA, and HSPA+.
3G is what we have all had since 3/Telstra launch 10 years ago.
HSDPA is the 7.2mbps connections that we got after that.
HSPA+ is the full fledged 42mbps Next G stuff that only Telstra has.
The problem is, when you are just using the phone as "a phone" it idles on a 3G connection to save battery and when you initiate a data connection it flicks on to the higher connection protocols for better speed.
What is supposed to happen when you initiate the data connection is the phone checks for H+ connection, then for H and then finally 3G. For some reason if you arent with Telstra or are in an area without HSPA+ the phone gets hung up for too long attempting to initiate the H+ connection and refuses to drop back to H!
Also, even if it does give up on H+ it then has an issue with falling back to 3G. Resulting in the problem that if it cant get H+ or the tower is too flooded for a H connection you get absolutely nothing until you restart the data mode within the phone, renegotiates with the tower and BAM, you are back in business.
So... there are 5 fixes;
1. Wait for KE9 (or what ever firmware fixes the modem timings etc)
2. Get a Telstra sim and never leave an area that has H+
3. Turn off/on data mode whenever it happens
to which i told him they were stupid answers and completely unacceptable, but then he came out with this complete gem!
4. using service code *#301279# you can turn off HSPA+ completely forcing it to start the data connections on HSDPA
5. using *#301279# again you can just turn off HSPA+ and HSDPA meaning it instantly starts downloading the data on 3G without delay
Now yes, i thought... great... ive bought this $779 phone that has all the latest and greatest technology and I cant even use it! But, I did some testing!
First of all my normal sim is Vodafone so turning off HSPA+ is an obvious one for me, im never going to get it so why bother. So now that the phone only attempts to get a connection with HSDPA the need to turn off and on data connection was getting more and more rare but still having the problem (i have a feeling that is due to congestion?). So i bumped it down to 3G only and it works perfectly 100% of the time!
The point of these faster connection protocols is speed so i did testing.
Vodafone sim, 4 bars of signal in the middle of a shopping centre.
HPSA+ turned on = 4mbps down, 1mbps up
HSDPA turned on = 4mbps down, 1mbps up
3G only = 3.5mbps down, 1mbps up
did this over and over and over again and to be perfectly honest, im willing to lose 500kbps to make sure that data always works and if you are just doing general web browsing the time it takes to initiate the HSDPA connection wastes more time than the slightly slower speeds with 3G does.
Now obviously this only works fine in my situation, if you are with Telstra and going from HSPA+ down to 3G means going from 20mbps to 3... i would be pissed. But for the rest of the country you are talking about a loss of less than 1mbps so in real world situations with just small amounts of burst data its fine
TLDR; Try and go online and the 3G up arrow lights up but never actually downloads anything
Dial: *#301279# – Change HSPA revision – Release 5 HSPDA only
test, if still a problem
Dial: *#301279# – Change HSPA revision – Release R99 HSPA off
Your welcome, Peace out!
dusty_nz said:
Found this on
http://forums.whirlpool.net.au/archive/1714413
****************** FIXED ******************
After contacting Samsung for an insane period of time (ended up on an international call to England i think... or now that i think about it could have just been some English guy in Aus lol) I have got an official explanation and confirmation that this issue is being looked into for KE8 (but it appears that KE8 has been launched in India already so it might be KE9).
*disclaimer*
I am no expert on mobile technology this in-depth however the (probably very) dumbed down version the Samsung guy told me was this;
*end disclaimer*
The problem stems from the fact that this phone has 3 forms of data connection, 3G, HSDPA, and HSPA+.
3G is what we have all had since 3/Telstra launch 10 years ago.
HSDPA is the 7.2mbps connections that we got after that.
HSPA+ is the full fledged 42mbps Next G stuff that only Telstra has.
The problem is, when you are just using the phone as "a phone" it idles on a 3G connection to save battery and when you initiate a data connection it flicks on to the higher connection protocols for better speed.
What is supposed to happen when you initiate the data connection is the phone checks for H+ connection, then for H and then finally 3G. For some reason if you arent with Telstra or are in an area without HSPA+ the phone gets hung up for too long attempting to initiate the H+ connection and refuses to drop back to H!
Also, even if it does give up on H+ it then has an issue with falling back to 3G. Resulting in the problem that if it cant get H+ or the tower is too flooded for a H connection you get absolutely nothing until you restart the data mode within the phone, renegotiates with the tower and BAM, you are back in business.
So... there are 5 fixes;
1. Wait for KE9 (or what ever firmware fixes the modem timings etc)
2. Get a Telstra sim and never leave an area that has H+
3. Turn off/on data mode whenever it happens
to which i told him they were stupid answers and completely unacceptable, but then he came out with this complete gem!
4. using service code *#301279# you can turn off HSPA+ completely forcing it to start the data connections on HSDPA
5. using *#301279# again you can just turn off HSPA+ and HSDPA meaning it instantly starts downloading the data on 3G without delay
Now yes, i thought... great... ive bought this $779 phone that has all the latest and greatest technology and I cant even use it! But, I did some testing!
First of all my normal sim is Vodafone so turning off HSPA+ is an obvious one for me, im never going to get it so why bother. So now that the phone only attempts to get a connection with HSDPA the need to turn off and on data connection was getting more and more rare but still having the problem (i have a feeling that is due to congestion?). So i bumped it down to 3G only and it works perfectly 100% of the time!
The point of these faster connection protocols is speed so i did testing.
Vodafone sim, 4 bars of signal in the middle of a shopping centre.
HPSA+ turned on = 4mbps down, 1mbps up
HSDPA turned on = 4mbps down, 1mbps up
3G only = 3.5mbps down, 1mbps up
did this over and over and over again and to be perfectly honest, im willing to lose 500kbps to make sure that data always works and if you are just doing general web browsing the time it takes to initiate the HSDPA connection wastes more time than the slightly slower speeds with 3G does.
Now obviously this only works fine in my situation, if you are with Telstra and going from HSPA+ down to 3G means going from 20mbps to 3... i would be pissed. But for the rest of the country you are talking about a loss of less than 1mbps so in real world situations with just small amounts of burst data its fine
TLDR; Try and go online and the 3G up arrow lights up but never actually downloads anything
Dial: *#301279# – Change HSPA revision – Release 5 HSPDA only
test, if still a problem
Dial: *#301279# – Change HSPA revision – Release R99 HSPA off
Your welcome, Peace out!
Click to expand...
Click to collapse
THIS IS A GREAT POST (even if it is a repost from whirlpool)!
So many people appear to be having this issue (including myself on O2 UK) where the data connection is stalling.
That code (*#301279#) is a gem.
Whilst I am certainly not happy that Samsung have released this phone with such a massive issue (telling you to wait until KE9 for a fix is really quite terrible!), I would rather have this fix in the meantime whilst waiting for the new firmware.
I have just disabled H/H+ by selecting 'Release 99 HSPA off' and my stalling issues have disappeared. Furthermore, my down speed is still 1.5 Mbps and upload speed is also 1.5 Mbps. I am more than happy with that speed. As the quoted post states, if you want more than this speed, this solution will not be good for you.
Thanks for posting this dusty_nw, this has been bugging me for weeks.
dusty_nz said:
Thanks, will try. what does fast dormancy do?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=14457802&postcount=8
If you have it enabled it will fall from H to 3G in 7 seconds when connection is idle, otherwise in 30 seconds. 7 seconds are to short it will lose time and battery renegotiating to H to often. Ex: when you read your rss feed it will renegtiate higher speed for every article you read, very annoying.
Click to expand...
Click to collapse
this should be stickied, fixed my issues i had on optus the connection would continually change from H, and 3g and stall i just disabled all except 3g and now its perfect and very quick great post!
One thing i did on mine with Telstra is change the APN from Telstra.wap to Telstra.internet made the internet feel better. Also got much better upload and download speeds.
Sent from my GT-I9100 using XDA Premium App
May be a sillt question but.
I used the stock dialer and put *#301279# in
Menu popped up.
Used my finger to press "[2] Change HSPA Revision"
Pressed "[2] Release 5"
Goes to menu with two options of which none seem to do anything when pushed.
Went back to strat of menu and selected "[1] Release R99"
Same options and none can be clicked.
So am I not doing this right? Have the changes been made with no signs or message? If they have changed how do I get them back?
I expected the option to change to visually say its "off" or something.
Although no message came up it appears my phone is staying in 3g so maybe it worked... Although I am in low reception visiting the country side so maybe they don't have H or H+ anyway....
If I selected the first option does this restrict data to 3G?
Select 2nd option for H?
or Select 3rd option for H+ or unrestricted?
Is this how its works?
Edit: I have now found it works like I thought. The screen after I click either of the options then shows what is active and is the confirmation in a way. I jumped on the forum a little too quick......
Hi. I've book marked this because I get this issue thanks.
However it is worth noting that difference between 6 and 5 is only hsupa which is upload. So you wouldn't expect change in download speeds changing that going back to 3g of course affects both directions.
tjjensen23 said:
One thing i did on mine with Telstra is change the APN from Telstra.wap to Telstra.internet made the internet feel better. Also got much better upload and download speeds.
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
WOW!!!! I just switched over.. mine use to max out at about 8Mbps, but my last test before the swap was 6.7Mbps... switched over and i tested 10Mbps and then 11mpbs!!
gunigugu said:
WOW!!!! I just switched over.. mine use to max out at about 8Mbps, but my last test before the swap was 6.7Mbps... switched over and i tested 10Mbps and then 11mpbs!!
Click to expand...
Click to collapse
Telstra.iph works best for me in Perth.
I use a SGS2 (bought in Europe through Expansys) on Telstra since 2 months now, without any issue. I used several firmwares and kernels since then (not to test, just to update: KE7, KG2, KG3), all behaved the same way.
I tried two different APN (telstra.iph and telstra.wap), both gave me the same kind of speeds (quite good, except some times in the middle of the day).
I never found the datas to create the telstra.internet APN (they do not seem to be on ausdroid). Could someone point me to them?
As an aside, I've just finished testing the I9000TDUKF4 modem (yes it works!), if Telstra did actually have tweaks made as they claim, there was no discernible difference on Telstra's NextG using their 'T' version KF4 modem and a stock KG3.
Any changes if any must be on the hardware level or via software set tweaks, the modem really didn't make any difference at all to my download speeds.
For those wanting to replicate the experiment or muck around I've uploaded the Telstra 'T' variant KF4 modem here: http://www.multiupload.com/VKPFYPURD5
asgard said:
As an aside, I've just finished testing the I9000TDUKF4 modem (yes it works!), if Telstra did actually have tweaks made as they claim, there was no discernible difference on Telstra's NextG using their 'T' version KF4 modem and a stock KG3.
Any changes if any must be on the hardware level or via software set tweaks, the modem really didn't make any difference at all to my download speeds.
For those wanting to replicate the experiment or muck around I've uploaded the Telstra 'T' variant KF4 modem here: http://www.multiupload.com/VKPFYPURD5
Click to expand...
Click to collapse
Thanks for this, I just stumbled upon this thread, messed about with a few settings and getting much better use out of NEXT G
Cheers
So, I have been on AT&T Straight Talk for the past few months and I have only used data a couple times in that time frame (I almost always use wifi). So I decided to run a speedtest on my data connection (I turned off wifi) and I notice that I never see speeds greater than 1 Mpbs no matter where I drive to and test it (even right next to or passing cell towers). This is my first smartphone.....Is this typical for a smartphone? My wifi speeds average 20 Mbps, so that sounds reasonable for wifi anyways. If that does not sound correct, how do I test whether the problem is with the phone or the service provider?