When trying to use TD2 as a modem it appears an error "conmanager" that doesnt let me use net on the pc.
does someone know whats this ???
would appreciate any help.
thanks a lot in advance
pedrovki said:
When trying to use TD2 as a modem it appears an error "conmanager" that doesnt let me use net on the pc.
does someone know whats this ???
would appreciate any help.
thanks a lot in advance
Click to expand...
Click to collapse
You may have to adjust your connection settings in Settings\Connections\Connections\Advanced.
Set both connections to connect to internet.
Related
hi ng!
i need a solution to use my pda qtek 2020i as "modem-device" for my linux pc.
i managed to get a rfcomm0, can send at-commands via this device, could dial out with a local software on my pc.... but,
if i try to use p.ex. efax - efax tells, that the modem does NOT support fax.
is there any way to solve my problem?
thanx a lot for any hints.
mario
ramsesii said:
i managed to get a rfcomm0, can send at-commands via this device, could dial out with a local software on my pc....
Click to expand...
Click to collapse
Can you do GPRS ? AFAIK, the gprs and fax data
go over different serial channel than the
AT command channel. You will find more
info here:
http://wiki.xda-developers.com/index.php?pagename=HTC_GSM
http://wiki.xda-developers.com/index.php?pagename=BlueangelProgress
hi!
yes - i can do gprs!
the problem is, that a sdp browse MAC only gives me channel 1 for serial connection, channel 2 for dial-up networking, and other channel (audio, file transfer,...).
thanx for the 2 links - but, the second is for mobile phones with linux on it - the first couldnt help me out.
i use normal windows mobile 2003 on my qtek 2020i - not linux (maybe i will sometimes )
any other ideas around?
thanx
ramses
ramsesii said:
the second is for mobile phones with linux on it
Click to expand...
Click to collapse
The hardware information doesn't depend on
the operating system
- the first couldnt help me out.
Click to expand...
Click to collapse
You can see that all the phones
use AT+FCLASS=0 as an init string.
What is the reply to 'AT+FCLASS=?' on alpine ?
You can also try:
AT+FMI?
AT+FMM?
AT+FMR?
AT+FCC=?
AT+FCQ=?
unfortunatly - nothing works.
my rfcomm is up: fcomm0: 00:09:2D:2B:EC:3F channel 2 connected [tty-attached]
but in minicom, which is connected via rfcomm0 all i get is...
Press CTRL-A Z for help on special keys
OK
at+fclass=?
ERROR
at+fmi?
ERROR
atdt
OK
AT+FCLASS=?
ERROR
AT+FMM?
ERROR
AT+FMR?
ERROR
AT+FCC?
ERROR
AT+FCC=?
ERROR
AT+FCQ=?
ERROR
quit
ERROR
exit
ERROR
bye
ERROR
AT+FCLASS=0
ERROR
this sounds.... not good
or am i doing something completely wrong?
thanx for your help.
ramsesii said:
at+fclass=?
ERROR
Click to expand...
Click to collapse
Hmm. Works as expected on my Universal.
It has something to do with your radio firmware,
maybe needs some special setup, or it is
simply not supported.
AT+FCLASS=0
ERROR
Click to expand...
Click to collapse
I don't know how the AT debug works on alpine (look up the registry keys in the wiki for himalaya), but
you may enable it, and PM me the log.
p.ex truefax works on my device... with it i can fax-out.
maybe i will go on that solution - is not what i wanted to have (faxout from the pc directlly) - but better then nothing.
hope RECEIVING fax will work with it.
thanx a lot for your nice help.
Hello all. I'm a newbie on this forum (found it very very useful so far!! kudos to you all!!) and after solving a lot of issue with your suggestion, i've only one left:
my notebook doesn't recognize properly my tytn (Orange SPV M3100) when using it as usb modem: instead of recognize it as HTC USB MODEM, it displays "SPVE200" and the max connection speed (even on HSPDA coverage) is 324kbs. I've tried to remove it and use the drivers on the cd in the box, but didn't manage to solve the prob. Does anybody has the same problem? and know how to solve it?
thnx
This Might Help
1.download this file.
http://dl1.uploadgalaxy.com/files/e52d58daacf8/USB_Modem.zip.html
2. Unzip and Run It.
3. goto Programs > Wireless Modem > Start in your Hermes...
4. Click on Connect in the USB Modem.
5. There You Goooooo.....
sohaibrafiq said:
1.download this file.
http://dl1.uploadgalaxy.com/files/e52d58daacf8/USB_Modem.zip.html
Click to expand...
Click to collapse
Hi sohaibrafiq,
it seems to me this link ain't working no more ... Can you check this please?
Thx!
patatmeister said:
Hi sohaibrafiq,
it seems to me this link ain't working no more ... Can you check this please?
Thx!
Click to expand...
Click to collapse
This Might Help You Then
http://forum.xda-developers.com/showthread.php?t=282780
Please help guys,
Every time I try to connect to the internet using Activesync I get the following Message:
"The page you are looking for cannot be found due to unknown error 0x80072f78"
I'm using activesync 4.5 and crystal v4 WM6 rom on I-mate Jamin
Please note that I have no problem connecting to the internet using WIFI
Please help
Thanks to all
H.S
It might be due to enabling the advanced settings of the USB connection.
Go to settings-connections-USB toPC and then disable the advanced network
Thanks man, it works
thanks again
i have jamin wm5 , and i have the same proplem
so if eny can help me in that
i try to do go settings-connections-USB toPC
but i didn't find usb to pc
so plz help me in that
i try found eny soleution from 2 weeks but i didn't
I'm new in windows mobile and i don't enything about it
thanks
ahmedara said:
i have jamin wm5 , and i have the same proplem
so if eny can help me in that
i try to do go settings-connections-USB toPC
but i didn't find usb to pc
so plz help me in that
i try found eny soleution from 2 weeks but i didn't
I'm new in windows mobile and i don't enything about it
thanks
Click to expand...
Click to collapse
try this reg fix. unzip file. copy to ppc and run
i cant download the files. tried active sync, turn on wifi...still cannot.
using GPRS also doesnt work. please help me. thanks.
found some links that supposed to help. but still cannot download the files.
http://www.ppcsg.com/lofiversion/index.php/t79866.html
http://www.ppcsg.com/lofiversion/index.php/t67627.html
http://www.ppcsg.com/lofiversion/index.php/t80728.html
admin22 said:
i cant download the files. tried active sync, turn on wifi...still cannot.
using GPRS also doesnt work. please help me. thanks.
found some links that supposed to help. but still cannot download the files.
http://www.ppcsg.com/lofiversion/index.php/t79866.html
http://www.ppcsg.com/lofiversion/index.php/t67627.html
http://www.ppcsg.com/lofiversion/index.php/t80728.html
Click to expand...
Click to collapse
first, wifi is not working via active sync
try this : connect to wifi > try a stie - if internet works, go now to Quick GPS and hit download, if it didn't download the files, then hit download again.
the same u can try via : GPRS
GPS cannot help u download thoue files
good luck !
problem solved. i use q-gps. files downloaded in a flash.
Is it possible to get the Usb modem working on our tab?
http://makeorbrick.blogspot.com/2011/11/make-your-usb-modem-compatible-for.html
other resources
aelsharawi said:
Is it possible to get the Usb modem working on our tab?
http://makeorbrick.blogspot.com/2011/11/make-your-usb-modem-compatible-for.html
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1513490
http://forum.xda-developers.com/showthread.php?t=940470
http://forum.xda-developers.com/showthread.php?p=23987592#post23987592
Help
aelsharawi said:
http://forum.xda-developers.com/showthread.php?t=1513490
http://forum.xda-developers.com/showthread.php?t=940470
http://forum.xda-developers.com/showthread.php?p=23987592#post23987592
Click to expand...
Click to collapse
Read all the posts, not able to understand anything
Unable to make HyperTerminal work on PC side
Tried a - VPN setup on tablet, ended up with a pattern lock problem, to get rid of it, did a factory reset
I have a GT 7500 Wifi + GSM and Relience netconnect (ZTE USB MODEM FFF1 #3).
Is there anyone to help me get this connected, make it as simple as U can.