Related
Hi,
I have a HTC Touch 3G:
The phone is recognised (the name), it seems to pair ok (had to put in a 16-digit PIN), but then the car (Passat 2008) kit cannot connect to the phone for some reason.
Is there any solution for this subject?
Regards,
SpiderXman
I believe, you have to turn on the rSAP-Profile in the BT section of your Jade.
The VW vehicles have a BT-Unit, that only works with mobiles, that have the rSAP (remote SIM Access-Profile) enabled.
You know, how to enable it ?
Start-->Settings--> Bluetooth --> SIM Access
Hope this helps.
Greetings from Cologne,
Arniebirdy
Thanks for your help,
However I have done this procedure without success.
SpiderXman
Emanuel Ferreira said:
Hi,
I have a HTC Touch 3G:
The phone is recognised (the name), it seems to pair ok (had to put in a 16-digit PIN), but then the car (Passat 2008) kit cannot connect to the phone for some reason.
Is there any solution for this subject?
Regards,
SpiderXman
Click to expand...
Click to collapse
Hi/ I have the same problem with BMW X5 2004. paring is OK, but it dosn't work. it looks like connect and then disconnect (on phone screen headset icon appear and disappear). SIM access anable but no sucses
With touch 3452 it was not a problem. HTC support team told me that it is a conflict with BT kit on BMW. Now I see not only.... What to do???????
For most of the things discused here no one has paid.
For the things people have paided for go to the garage, i know i would!
Tom Lenferink said:
For most of the things discused here no one has paid.
For the things people have paided for go to the garage, i know i would!
Click to expand...
Click to collapse
You know you can, but how to resolve this issue ???? I think any payment can't, can it?
Hi,
using Jade's BT SAP with BMW 3 series (E91).
Works like a charm, except one issue: names in BMW phonebook appear sorted by first name.
In Jade its sorted - as it should be - by last names.
No solution found until now.
Anybody an idea?
Thanks
@ConsultantR
Try this for older BT Kits: http://www.jetwaremobile.com/
ConsultantR said:
Hi/ I have the same problem with BMW X5 2004. paring is OK, but it dosn't work. it looks like connect and then disconnect (on phone screen headset icon appear and disappear). SIM access anable but no sucses
With touch 3452 it was not a problem. HTC support team told me that it is a conflict with BT kit on BMW. Now I see not only.... What to do???????
Click to expand...
Click to collapse
Hi there,
I have a similar problem with my Volvo S40 2009. My Jade and the car connects each other but every 15-30 seconds the connection cuts off. It is very annoying while talking to someone, just in the middle of the conversation the radio starts to run again, since Jade loses connection to the car.
Is this some kind of configuration or setup issue? Any help?
I had this on / off problem too.
It was a fault in the phonebook contacts (some signs are obviouly not allowed in this bluetooth stuff (e.g. / or ")
So i moved all contacts to a folder, that wasn´t synchronised and that worked fine. Afterwards i added this removed contacts back step by step and was able to identify the problematic ones.
The easy way instead is to set up the phonebook to SIM only and copy the most used contacts to the SIM
Regards Quirlsen
Quirlsen said:
I had this on / off problem too.
It was a fault in the phonebook contacts (some signs are obviouly not allowed in this bluetooth stuff (e.g. / or ")
So i moved all contacts to a folder, that wasn´t synchronised and that worked fine. Afterwards i added this removed contacts back step by step and was able to identify the problematic ones.
The easy way instead is to set up the phonebook to SIM only and copy the most used contacts to the SIM
Regards Quirlsen
Click to expand...
Click to collapse
Thanks for the hint Quirlsen. Is it only the Name and Surname lines, which I have to correct? Otherwise it would be impossible, since I also have the Windows Live(Msn Messenger) contacts in the Contact List.
By the way is there a way to remove those Msn Messenger Contacts from the phonebook? They just popped up after I logged in once to Windows Live.
To be honest, i don´t know.
I´ve exported my whole contact list to csv, cleand it up with Control+H and imported it back (i had to add all picvtures afterwards
Your Win Live prob you could solve by defining different phonebooks for sync with phone and other stuff.
I have a problem where my HD2 does not work properly with my Land Rover Freelander 2 in-built bluetooth car kit.
The HD2 pairs with the car and I can search my phone book, see my last dialled number, I can even dial a number, BUT, the phone does not connect properly - the car radio should cut out and phone audio come through the car speakers, but instead the radio just continues to play. And shortly after the call is connected to the other party the line is terminated.
My Nokia phone works perfectly with my car, but this phone does not. Even my Sony Ericsson Xperia X1 did not for properly with the Freelander 2.
I did manage to make one successful call, but after I stopped and restarted the car, the problem returned!! Arghhhhhhhhhhhhhhh!
So, does any one know of a fix? Surely hands free/car kit is a standard?
Help!
same problem here. i have a bluetooth car stereo. Always worked fine with my previous HTC's. But now with the HD2 i get the exact same problems as you... I think it's software bug. i have rom version 1.43.404.1 NLD
i hope this gets sorted out cause i use bluetooth audio streaming a lot in the car....same for handsfree calling
Paired it with my Pioneer FH-P80BT on my way to sell my 3GS and recieved a call. Got the same issue as described above - just a bug i presume.
I'm experiancing similar problems. All works fine (incoming call's or outgoing call's) but they get disconnected randomly it seems. I'm using a JVX NX7000 by the way. No problem with my iPhone. Hope they fix it soon!
I tested it with my BMW Idrive last night which is notoriously difficult and it worked fine, I was really surprised tbh! But was able to recieve and make calls, the stereo cut out and could see the phone book too. With my N82 i was only ever able to make/receive calls.
Same problem - Jaguar XF - it docks ok but I have to initiate calls from car (vs phone). Just some weirdness going on...
glenner05 said:
same problem here. i have a bluetooth car stereo. Always worked fine with my previous HTC's. But now with the HD2 i get the exact same problems as you... I think it's software bug. i have rom version 1.43.404.1 NLD
i hope this gets sorted out cause i use bluetooth audio streaming a lot in the car....same for handsfree calling
Click to expand...
Click to collapse
Mercedes brutality
I have a new Mercedes C, and when the HD2 is connected over bluetooth I get an extremely loud, strange ringtone when receiving a call. It is so loud it could really make your shoes go off.
Also it is none of the ringtones available to choose from, inside the phone - it sounds more like a BIOS beep from a PC and hits me while the normal ringtone is playing as well.
It definitely comes from the phone, not from the car stereo. I have not figured out how to resolve this, I think it is outright dangerous for unprepared drivers.
I have a Nissan Pathfinder; it paired ok, and dials from the Pathy without probs. Ringtone is ok too. Sound quality seems better than my old Tytn so all in all v happy.
Doesn't stream music, but that's Nissan's fault, not HTC.
Works fine with the Ford BT system in the Ford Focus (2009).
HTC HD2 Pairing with a Freelander 2 - SUCESS!!!
Success!!!
So far so good, I applied a known change to the HD2 registry and I am now making and answering calls without fuss!
Change Registry setting:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Sys
Add the DWORD setting COD=5374476
This makes devices see the HD2 as a 'Normal' phone.
Hope this helps everyone.
graemenwallace said:
Success!!!
So far so good, I applied a known change to the HD2 registry and I am now making and answering calls without fuss!
Change Registry setting:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Sys
Add the DWORD setting COD=5374476
This makes devices see the HD2 as a 'Normal' phone.
Hope this helps everyone.
Click to expand...
Click to collapse
Hello i have same problem with my BMW X5. Can you explain better your steps ?
graemenwallace said:
Success!!!
So far so good, I applied a known change to the HD2 registry and I am now making and answering calls without fuss!
Change Registry setting:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Sys
Add the DWORD setting COD=5374476
This makes devices see the HD2 as a 'Normal' phone.
Hope this helps everyone.
Click to expand...
Click to collapse
Interesting, I have a similar problem with my 2009 BMW 3 I explain here (sorry I posted before discovering this thread) and I'll try your registry tweak.
But you say that it is "a known change" to the HD2, could you tell us where you saw it ? Is there another discussion about the BT stack somewhere or more generaly about the Widcomm implementation in the HD2 ?
The HD2 being so recent and in short supply, I'm a bit surprised something like that is "well known"
Thanks for your help.
It works !
graemenwallace, I just tried after applying your tweak and... OMG, this is AWSOME man, it just WORKS !
I still just have one gripe though, it seems that the car doesn't always receive the RF level correctly at the first connection. Sometimes it sees the phone as having no carrier at all (no bars in the RX level display), preventing the car to make any calls, but as soon as I receive a call, the level resets to full bars and I can pick the call and make calls myself after that.
When the first call comes in, I can see the display with no bars and a "?" appearing on top of it for a short time before it becomes full bars.
So there is still some compatibility problems, but at least now I can pick-up incoming calls without risking my life.
So I suppose you are a potential life saver then
Thanks mate,
Yves.
Bluetooth is working YES with JVC KD-AVX44 ADV49
After the registry tweak from graemenwallace the bluetooth connection is working properly with my car radio (JVC KD-AVX44/KD-ADV49).
The phone functions ok now (incoming & outgoing calls) Also the AD2P connection is super (very good sound)
Also the ID3 tags are functioning (didn't function with the X1 Xperia)
I see the track title now into the JVC display
Skipping etc. all is functioning. I will tell HTC about it because I have a ticket running for this issue. I think they have to solve this issue
Big thanks for this trick
By doing a little search on the net, it seems like graemenwallace suggested that this problem is not new with smartphones that identify themselves as such.
The tweak above forces the BT stack of the phone to identify itself as a standard phone instead of a smartphone.
What's puzzling is that my BMW handsfree worked with other smartphones so far, including the iphone.
Anyway, it's ok now, but I wonder what bad press this will cause to HTC.
The majority of the users are unaware of this kind of wizardry and this justs adds up to the long list of bugs of the HD2.
When I first got the phone a few days ago I was rapidly convinced to return it immediatly as it's fancy interface wasn't enough to overcome all the shortcomings. It was plain unusable as a business phone.
Now after applying most of the tweaks, it begins to show potential, but HTC really has to work on the problems we can't fix by tweaking the registry.
I tried this also, but for me it didn't work.
But my situation is a bit different, as I am not able to connect the HD2 through the Sim Access Profile with my car, which is an Audi A6 mit Bluetooth preparation and I have also the Audi rSAP Adaptor installed in the centre arm rest.
My problem is, that I get a connection to the car, but SAP does not activate and I can't get access to my phonebook - so I only have kind of a handsfree profile...
Am I right that you all use the handsfree profile in your cars and no SAP?
jah said:
Works fine with the Ford BT system in the Ford Focus (2009).
Click to expand...
Click to collapse
Does your Ford system have the Bluetooth audio choice?
I get my Ford Focus changed every six months coz i'm a driving instructor and it comes as part of the deal.
On my last Ford Focus my htc tytn 2 connected ok and I could make and receive calls ok.
However, when the new car was delivered the Ford system had bluetooth audio choice and ipod integration which the other one didn't.
Now my htc tytn 2 didn't connect very well at all.
Now with my HD2 it does connect only if I have the bluetooth audio profile selected.
But now the music player keeps appearing and wants to play music all the time. If I pause the music on the phone it just starts replaying.
Anyway I will try the registry tweak in this thread and hopefully that will solve the problem.
Paul.
Jolig said:
I tried this also, but for me it didn't work.
But my situation is a bit different, as I am not able to connect the HD2 through the Sim Access Profile with my car, which is an Audi A6 mit Bluetooth preparation and I have also the Audi rSAP Adaptor installed in the centre arm rest.
My problem is, that I get a connection to the car, but SAP does not activate and I can't get access to my phonebook - so I only have kind of a handsfree profile...
Am I right that you all use the handsfree profile in your cars and no SAP?
Click to expand...
Click to collapse
I have the same problem. I`ll try to pair my HD2 with MB C-klass using SAP but i can`t get them connected it seems like a SAP adaptor can`t activate a PIN input window on HD2 (i guess). With other phones it works perfect (tryed with Nokia 5800, 6500).
Shark_Abuser said:
I have a new Mercedes C, and when the HD2 is connected over bluetooth I get an extremely loud, strange ringtone when receiving a call. It is so loud it could really make your shoes go off.
Also it is none of the ringtones available to choose from, inside the phone - it sounds more like a BIOS beep from a PC and hits me while the normal ringtone is playing as well.
It definitely comes from the phone, not from the car stereo. I have not figured out how to resolve this, I think it is outright dangerous for unprepared drivers.
Click to expand...
Click to collapse
could you pls describe, how did get them paired? when i try to pair them, i see the device`s id, try to "call" it, see pin code and after that i hear the descending tone. and it nothing occurs. SAP is enabled, device is discoverable, what else? Any idea?
Jolig said:
I tried this also, but for me it didn't work.
But my situation is a bit different, as I am not able to connect the HD2 through the Sim Access Profile with my car, which is an Audi A6 mit Bluetooth preparation and I have also the Audi rSAP Adaptor installed in the centre arm rest.
My problem is, that I get a connection to the car, but SAP does not activate and I can't get access to my phonebook - so I only have kind of a handsfree profile...
Am I right that you all use the handsfree profile in your cars and no SAP?
Click to expand...
Click to collapse
I feel your pain, my wife has a GolfPlus and the rSAP instalation is crap.
It's overly expensive and useless if you don't have one of the few phones compatible with it.
Unfortunately, many customers are falling in this trap, thinking it is a standard handsfree, but it is not, it is a full GSM build-in which only access your phone SIM card to log into the network and download your contacts.
In the case of my wife, the dealer was honest and clearly stated that it was a mistake to order this option.
The only problem is that he had no other alternative than proposing an Parrot retrofit which wasn't really an option for me as it wasn't integrated in the car and certainly not in the navigation system.
But internet is your friend and the solution is quite simple, the Kufatec kit.
This is brilliant, it is a small box that connects to the CAN bus of many german cars and integrates perfectly into existing navigators, it uses the steering wheels command buttons and so on.
It is much better (more functions) than original BT options, is tailored to each brand so that the displays are in the same style as the original ones etc.
More interesting, it is field upgradable (just a laptop with BT) so that it is potentialy compatible with anything existing or not yet.
And it only costs a fraction of this crappy rSAP option.
In your case, the good news is that it can simply replace your actual rSAP kit for a minimal installation fee. (the CAN bus has to be reprogramed however, so professional instalation needed)
There is another solution: to replace the unit you have (it is situated under the driver's seat) by a skoda unit. This unit has the same connector but is simple handsfree instead of rSAP.
Hope this helps.
I can connect the HD2 to my new MINI with bluetooth carkit fine via headset profile.
However, the phonebook does not sync with the car.
Ir worked fine with the HD with the Microsoft bluetooth-stack.
Is there any solution for that?
bill340 said:
I can connect the HD2 to my new MINI with bluetooth carkit fine via headset profile.
However, the phonebook does not sync with the car.
Ir worked fine with the HD with the Microsoft bluetooth-stack.
Is there any solution for that?
Click to expand...
Click to collapse
With TouchHD i did sync Phonebook to my nissan car without problems (winmobile 6.1)
I think this program will work on HD2 also (winmobile 6.5)
http://www.handango.com/catalog/ProductDetails.jsp?productId=183981&platformId=30
regards nico
No, that does not help.
With this app you can only send contacts and so on to another device.
But here, everytime you connect the device via bluetooth with the car, the car should read the contacts from the phone.
That worked without problems with the microsoft-stack.
I am having a similar issue, paired phone with Mercedes HFP and first time contacts came across. Next time back in the car and it reconnects, the contact memory is empty? Can still make and receive calls but no contacts. If I re-pair the phone by resetting HFP in car then contacts come across? Software issue on phone or car kit driver issue? Previously had HTC S710 and had no problems. Very annoying so any help would be appreciated.
Thanks
Same here - I even ca`nnot get the car be paired with HD2 - why ?
Hello,
here is my issue with the BT connection: I have a Pioneer F900BT unit in my car. With my previous Nokia E66 everything worked just fine.
Now, when connecting with HD2, connection works ok, phonebook is downloaded ok, BUT: when there is a call, the music in the car is not silenced automatically; what's worse, it seems the phone doesn't send any call identification to the headunit, since all the history (outgoing, incoming calls) is empty. So, I cannot redial or see who's calling me.
I did try the fix in the registry described on another thread (setting HKLM\Software\Microsoft\Bluetooth\sys\COD=5374476, but it doesn't help.
Any idea?
Thank you.
It works perfectly with my Mercedes Command with Bluetooth Adapter, it does not transfer all of my 800 contacts because it use to make a new entry for each tel. number (Home / Works, etc.) therefore it says "memory full" at about 75% but I can understand. At least I can call/recognize up to the "S" beginning contacts.
Anyhow, since I used to have this problem in the past, you could try Jetware, it worked for me with my Cruise.
dfulgo said:
It works perfectly with my Mercedes Command with Bluetooth Adapter, it does not transfer all of my 800 contacts because it use to make a new entry for each tel. number (Home / Works, etc.) therefore it says "memory full" at about 75% but I can understand. At least I can call/recognize up to the "S" beginning contacts.
Anyhow, since I used to have this problem in the past, you could try Jetware, it worked for me with my Cruise.
Click to expand...
Click to collapse
Jetware unfortunatly does not work with the widcomm-stack used in the HD2.
jma050 said:
I am having a similar issue, paired phone with Mercedes HFP and first time contacts came across. Next time back in the car and it reconnects, the contact memory is empty? Can still make and receive calls but no contacts. If I re-pair the phone by resetting HFP in car then contacts come across? Software issue on phone or car kit driver issue? Previously had HTC S710 and had no problems. Very annoying so any help would be appreciated.
Thanks
Click to expand...
Click to collapse
To follow up, I have found that its the pin lock (mentioned in another thread) that is causing the problem. If you unlock your phone before you pair up then contacts are coming across every time. May not work for everyone if their problem is different but has for me so wanted to share. If anyone knows how to bypass security issue with paired device I would like to know but as a workaround its better than no contacts!
I have this problem with my BMW iDrive too. No problems getting the address data on the HD but not working for me on the HD2. Can pair and make calls though. Any solution?
phonebook does not sync
I have a BMW with the bluetooth feature. From what I have noticed there is a connection started to the phonebook and it starts sending (and receving some) information but after about 110k it stoppes and the phonebook is disconnected. I would be happy to assist in any further analysis if anybody has any ideas.
I have no problem making and receiving calls in through this setup, but, as stated, the connection to the phonebook is not possbile. This was previously possible throgh the HD
//Awi
aszotten said:
I have a BMW with the bluetooth feature. From what I have noticed there is a connection started to the phonebook and it starts sending (and receving some) information but after about 110k it stoppes and the phonebook is disconnected. I would be happy to assist in any further analysis if anybody has any ideas.
I have no problem making and receiving calls in through this setup, but, as stated, the connection to the phonebook is not possbile. This was previously possible throgh the HD
//Awi
Click to expand...
Click to collapse
read my previous reply, its because your phone is locked whn it connects. If you unlock it before you pair up it should work.
jma050 said:
read my previous reply, its because your phone is locked whn it connects. If you unlock it before you pair up it should work.
Click to expand...
Click to collapse
OK. I tried to just unlock it, but this did not work. I will try to unpair, then unlock and then pair again, and see if this then works.
//Awi
Did not work ...
aszotten said:
OK. I tried to just unlock it, but this did not work. I will try to unpair, then unlock and then pair again, and see if this then works.
//Awi
Click to expand...
Click to collapse
Well, unfortunately it did not work. I unpaired the phone from the carkit, then removed the pin on the phone, did a soft reset, paired the phone with the carkit and saw that it started communicating with the phone book, but the communication stopped after about 110kb, as it usually does, and the phonebook was then disconnected.
Any ideas anyone?
//Awi
Same issue
I'm facing the same issue... New Mercedes, phone calls are no problem but phonebook is not accessible... I doubt that it's a lock issue... When I paired it it also didn't work but there it was certainly unlocked...
jma050 said:
To follow up, I have found that its the pin lock (mentioned in another thread) that is causing the problem. If you unlock your phone before you pair up then contacts are coming across every time. May not work for everyone if their problem is different but has for me so wanted to share. If anyone knows how to bypass security issue with paired device I would like to know but as a workaround its better than no contacts!
Click to expand...
Click to collapse
can you please direct me in the right direction...what are you refering to here?
please help
Hi
I have a BMW X5 and a HTC HD2 with the newest ROM. When I enter the car, HD2 is recognised automatically by the car and I can place phonecalls dialing from my HD2. The only thing that does not work is that BMW tries to upload my phonebook from the phone but it does not get it. BMW says "please wait" - forever.
Before I flashed the ROM, this worked. Anyone has any ideas? I would even pay for someone in Zurich who comes and fixes this. One thing I could do of course is to downgrade my ROM again. But before I do this, I want to explore any other options.
Thanks a lot!
PS: jetwaremobile.com definately does NOT work on HD2
I have exactly the same issue. The HTC HD2 works ok for calls etc but the phone book upload is "please wait" forever. Very annoying. I have the standard up to date ROM and BMW X5 2009 model. Any help would be great.
Thanks
mrickenbach said:
Hi
I have a BMW X5 and a HTC HD2 with the newest ROM. When I enter the car, HD2 is recognised automatically by the car and I can place phonecalls dialing from my HD2. The only thing that does not work is that BMW tries to upload my phonebook from the phone but it does not get it. BMW says "please wait" - forever.
Before I flashed the ROM, this worked. Anyone has any ideas? I would even pay for someone in Zurich who comes and fixes this. One thing I could do of course is to downgrade my ROM again. But before I do this, I want to explore any other options.
Thanks a lot!
PS: jetwaremobile.com definately does NOT work on HD2
Click to expand...
Click to collapse
So any ideas? Now we are already two you can make happy! Thanks
Hey..
I don't have a BMW neither a bluetooth radio BUT i somewhere read in this forum, that there is a fix, to let the hd2 be recognized as normal phone
I know I'm not that much help , but I hope u can find the thread here good luck =)
HD2_Noob said:
Hey..
I don't have a BMW neither a bluetooth radio BUT i somewhere read in this forum, that there is a fix, to let the hd2 be recognized as normal phone
I know I'm not that much help , but I hope u can find the thread here good luck =)
Click to expand...
Click to collapse
I have a 2008 BMW, and I did experience this the first time..I sat there waiting for a few mins adn then got bored...but after I had turned the car off, been away and come back..it transferred straightaway.
Funnily enough, when I had my iphone (yes..sorry) I had the little image of the phone next to the BT signal on the display. I don't get this straight away with the HD2, but it always eventually appears..and then stays there until I hard reset my phone and do a ROM upgrade and then start the pairing again..where I just get the BT signal...then randomly..a few weeks later, the phone image appears again....very odd
Works fine here with a BMW 5x from 2008.. Using miris 6.5.x ROM
Funnily enough, when I had my iphone (yes..sorry) I had the little image of the phone next to the BT signal on the display. I don't get this straight away with the HD2, but it always eventually appears..and then stays there until I hard reset my phone and do a ROM upgrade and then start the pairing again..where I just get the BT signal...then randomly..a few weeks later, the phone image appears again....very odd
Click to expand...
Click to collapse
Hi, I also have a 2008 BMW (E93) and I do see the phone logo. It also syncs about 250 of my >3000 contacts. With my TyTN2 I used "Jetware Mobile" to sync just one dedicated category. But that doesn't work anymore with MinMo 6.5
schrej said:
Hi, I also have a 2008 BMW (E93) and I do see the phone logo. It also syncs about 250 of my >3000 contacts. With my TyTN2 I used "Jetware Mobile" to sync just one dedicated category. But that doesn't work anymore with MinMo 6.5
Click to expand...
Click to collapse
oh yes it does!
in fact, this is the only thing that works in Jetware with WM 6.5 - nothing else works in my case
i have a 2005 X5
bmw
i have a 2006 bmw X5 and the phone book works perfect so does everything else very happy )
zipolly said:
i have a 2006 bmw X5 and the phone book works perfect so does everything else very happy )
Click to expand...
Click to collapse
Which ROM do you use 1.66? or earlier? With my earlier ROM I had no problems, but since I upgraded to 1.66 (German), the phonebook does not transfer...
Bluetooth auto control problem
I can’t control my bluetooth (on/off) when using Inesoft phone profiles/controls; I have also tried other programs but no success(in another program the window of bluetooth was disabled); through all programs, I could control phone, WIFI, and gprs but not the Bluetooth. The only way to turn the Bluetooth on/ off is the Comm Manager (Manually); could anyone help please. Thanks
2006 bmw
I use the latest 1.66 wwe rom off t he htc website with no problems at all .
zipolly said:
I use the latest 1.66 wwe rom off t he htc website with no problems at all .
Click to expand...
Click to collapse
thank you, I am glad it worked for you...you must have a newer generation ULF than me then.
Is your phone HD2? mine is Toshiba TG01..I have managed to make it work 50/50 of the times, but I do not know WHAT CHANGES are between it working and not working...it is very frustating to know (and experience it working) that it can/should work, but not being able to
I have a new HTC Mini HD and have the same problems with my 2009 BMW 3. BT Headset function works just fine, but iDrive keeps trying to sync the telephone book, unsuccesfull. Instead, my phone's battery gets drained. Anyone any sollutions?
Unfortunately I don't have an answer for your question, but it sounds like it might have something to do with the bluetooth stack used for that ROM/Radio not being recognized by the car. Perhaps the layer that deals with data transfer is removed. Sorry I can't be of more help here.
What I can do to help is to offer a warning. I am a former BMW Client Advisor, and have been told many, many times by service technicians that using phones which are not specifically approved by BMW can affect your car's ECU (brain) and if it needs to be repaired or replaced, it will not be covered under warranty. That could be just nonsense to force you into buying only phones which BMW has tested (or vendors have paid for a marketing fee), or it might be spot on, in which case you run a pretty big risk.
Hope this helps.
OK, problem solved. BMW updated my carsoftware to its newest version last week and now my HD2 works perfectly with my car (again). I can make calls AND my phonebook is synced as well.
Hint1: Try if your phonebook sync problem exists with the SIM contacts as well as with the phone contacts
Hint 2: worldwideweb.bmw.com/com/de/owners/navigation/bluetooth/compatibility_check_intro.html
a_petrov303 said:
oh yes it does!
in fact, this is the only thing that works in Jetware with WM 6.5 - nothing else works in my case
i have a 2005 X5
Click to expand...
Click to collapse
zipolly said:
i have a 2006 bmw X5 and the phone book works perfect so does everything else very happy )
Click to expand...
Click to collapse
Hi All,
I have a BMW X5 2005 model. I can pair the phone OK but it constantly disconnects and reconnects once the transfer of the phonebook occurs. The phonebook transfers always start from scratch when this happens and nothing gets loaded to the car's phonebook.
If a call comes in, or if I make a call while it is connected (like within 5 seconds) the phone stays connected for the duration of the call.
I have tried all the Regisrty tweaks and none change the behaviour.
I also read it is because the HD2 uses Widcomm BT stack and not the MS BT Stack.
Zippolly and a_petrov303 and all those that have it working, can you please tell me which Rom you are using? I am using the latest Energy's 6.5.x rom. i noticed someone mentioned Miri's 6.5.x Rom works.
Thanks,
Rob
I have a 07 E60. The HD2 pairs fine, synchs contacts fine, but the sound quality is so bad it's not useable. Of course bmw says it's not a compatible phone, but I think there is a problem with the car as my Diamond won't find it, even though it is supposed to be supported
its mainly due to the car bluetooth, BMW etc don't make the car kit mostly siemens do and they are slow on the uptake of doing updates.
anybody found a snap-in for the hd2 yet?
I have a 7-series F01 and it is really annoying to have to deal with that usb cable...
Ontopic
I had the BT problem too, deleting the profile and repairing the phone did the trick for me...
Im new to the android system and am having difficulties pairing the Bluetooth of the X10 to my car system (this worked a dream with the X1). I know there are issues with the Bluetooth android 1.6 version but the spec of the phone included A2dp. Any ideas why the car can not pick up the phone were as phones 2-3 yrs older can?
i have bluetooth connection with x10 and carradio. turn on bluetooth, in setting you have turn on the option discovable ... blablabla ... and than search for the radio... and make connection ...
Sent from my X10i using the XDA mobile application powered by Tapatalk
Cheers for the reply. I managed to sort the issue out. Had to unpair the previous handset from the car. X10 works a dream now ;-)
And in synching your phone to the car all of your contacts get synched as well?
On my BMW BT phone-kit I only get about half of my approx. 600 phone contacts moved over. Anyone know what could be the problem here? The exact same contacts were always 100% glitch-free when synching with my old Rhodium (WM TP2) phone...?
Dialing, answering, speaking to the contacts I actually have in the car works fine, but... there are so many missing!
Cheers/M
In my car the X10 BT stops working after 1 minute according to the issues mentionned here (http://code.google.com/p/android/issues/detail?id=3960#makechanges)
It's a pity
McHan said:
And in synching your phone to the car all of your contacts get synched as well?
On my BMW BT phone-kit I only get about half of my approx. 600 phone contacts moved over. Anyone know what could be the problem here? The exact same contacts were always 100% glitch-free when synching with my old Rhodium (WM TP2) phone...?
Dialing, answering, speaking to the contacts I actually have in the car works fine, but... there are so many missing!
Cheers/M
Click to expand...
Click to collapse
I have some contacts missing also.. From names S-Z.. I have no idea why this is .. When i manually dial the number from the car dial the number and name gets recognized. Very strange indeed Must be a limit on how many numbers are available to sync?
now i realize it's android's problem not x10's problem
that's a good thing to know....
cuz my x1 worked fine, and x10 borke my heart while it cant link to my car properly.....
now I'll just wait for the fix
was thinking to return it. lol now it seems now it's not nessecry =D
sinox124 said:
now i realize it's android's problem not x10's problem
that's a good thing to know....
cuz my x1 worked fine, and x10 borke my heart while it cant link to my car properly.....
now I'll just wait for the fix
was thinking to return it. lol now it seems now it's not nessecry =D
Click to expand...
Click to collapse
yea same her with the MW600 headset but at long its a software problem it can be fixt ..hope se will wix it soon (or in september with the 2.x android update where i also wonder if they add dualtouche support or not )