Related
Is there any safe mode in WM 6.xx ??
my gosh, I do overclocked to high and I already put the shortcut OCT run in start up folder, and it cause hang every boot.
Is there any suggestion ? I know flasing the ROM is always can fix the problem, but with all tweaks and installed application, it's make me frustated.
I just need to get in the internal memory without execute the OCT, delete the file temporary and then setting default.
Can anybody help ?
forget about safe mode, I search every post, every forum out there, form what I had read it's should install third application like safemode 3.0, spb phone, or some thing like that.
I just try another way, access the device memory without booting WM (it's sense that's make my phone stuck).
I go to boot loader mode, TP2 with press and hold volume down then press power button. (It's just like we want to flash with storage card, but don't do flashing). So I am stuck in here again, but still find the way to access it.
NB: I hate to flash it (hard reset) again, because the contacts that I didn't back up, and the all stuff I installed.
Flashing/Hard reset is your only chance.
Post in the correct section next time.
Thread closed.
So basically I rooted my vibrant, and realized it was hardware locked, as in recovery/download key combinations don't work.
I installed clockwork Mod recovery and backed up my system using the backup function. I then proceeded to flash the "Obsidian V2 - JK2 Official Froyo Based 2.2 - Team Whiskey" rom.
When that was done, I think I made a mistake by restoring the backup before restarting the phone before the first boot. Therefore, I am now stuck on the Vibrant/Samsung first boot screen.
I've researched a bit on how to get the phone into download/recovery mode on hardware locked models and none of the methods I found worked. A friend told me that apparently there was a method by using heat and a soldering iron....but if possible I want to avoid that unless its the last thing I can do to restore it.
Extra Info:
I had ADB turned off on phone before flashing ROM
It is samsung Vibrant Tmobile version, not Bell, and its hardware locked.
What I think the cause of the problem was that I restored a backup from 2.1 immediately flashing the v2.2 rom. Maybe I should have booted first into the new rom before trying to restore any backups...
When I plug my phone into the computer it starts charging (Battery icon with amount and animation of dots works)
I've tried using Droidexplorer as well but it doesn't detect my device.
My device makes the connection sound when connected to windows.
So hopefully, if you have any ideas for how this can be fixed with ODIN or how to get the phone back to the stock ROM, or even how I can force my phone into recovery or download mode without using a soldering iron then that would be extremely helpful. Thanks in advance
just happened to me too. Please help!
I figured it out.
Its because I flashed a backup which was a 2.1 image when I had a 2.2 kernel installed. And that = death.
The soldering method isn't that bad, so i fixed the problem.
That`s what happened to me too. But i just recovered my wife`s phone. While holding volume keys i pluged usb and voila, got into download mode. That means it`s not fully bricked. Then just did the odin recovery and the phone is back to life.
Thanks to all the devs in this forum.
Unfortunately, that method wont work for hardware locked phones, so the soldering jig is the only possible way to force the vibrant into download mode if its hardware locked.
You can still get to download mode using adb even if the phone won't fully boot.
Sent from my SGH-T959 using XDA App
Possible, but if ADB on the phone itself was turned off before the soft brick would it still be possible?
Zeltex said:
So basically I rooted my vibrant, and realized it was hardware locked, as in recovery/download key combinations don't work.
I installed clockwork Mod recovery and backed up my system using the backup function. I then proceeded to flash the "Obsidian V2 - JK2 Official Froyo Based 2.2 - Team Whiskey" rom.
When that was done, I think I made a mistake by restoring the backup before restarting the phone before the first boot. Therefore, I am now stuck on the Vibrant/Samsung first boot screen.
I've researched a bit on how to get the phone into download/recovery mode on hardware locked models and none of the methods I found worked. A friend told me that apparently there was a method by using heat and a soldering iron....but if possible I want to avoid that unless its the last thing I can do to restore it.
Extra Info:
I had ADB turned off on phone before flashing ROM
It is samsung Vibrant Tmobile version, not Bell, and its hardware locked.
What I think the cause of the problem was that I restored a backup from 2.1 immediately flashing the v2.2 rom. Maybe I should have booted first into the new rom before trying to restore any backups...
When I plug my phone into the computer it starts charging (Battery icon with amount and animation of dots works)
I've tried using Droidexplorer as well but it doesn't detect my device.
My device makes the connection sound when connected to windows.
So hopefully, if you have any ideas for how this can be fixed with ODIN or how to get the phone back to the stock ROM, or even how I can force my phone into recovery or download mode without using a soldering iron then that would be extremely helpful. Thanks in advance
Click to expand...
Click to collapse
Just a suggestion:
1:Open ODIN
2:Connect USB cable to computer (not phone)
3:NOW, connect USB to phone
4ress POWER, VOL. UP, & VOL. DOWN at same time and HOLD (yes i read that ur hardware locked but just try )
5:Wait for first Vibrant logo to appear, and as SOON as it dissapears...release ONLY the POWER button. Keep hold on both volume buttons.
Uh sorry if this didnt work but atleast it was worth a try.
*words in caps are keypoints, im not angry
roguly said:
Just a suggestion:
1:Open ODIN
2:Connect USB cable to computer (not phone)
3:NOW, connect USB to phone
4ress POWER, VOL. UP, & VOL. DOWN at same time and HOLD (yes i read that ur hardware locked but just try )
5:Wait for first Vibrant logo to appear, and as SOON as it dissapears...release ONLY the POWER button. Keep hold on both volume buttons.
Uh sorry if this didnt work but atleast it was worth a try.
*words in caps are keypoints, im not angry
Click to expand...
Click to collapse
Doesn't work....it only keeps bringing up the battery charging screen and won't even boot to vibrant screen.
Zeltex said:
Possible, but if ADB on the phone itself was turned off before the soft brick would it still be possible?
Click to expand...
Click to collapse
That I'm not sure on, but worth a shot.
Sent from my SGH-T959 using XDA App
Can you please link me to an article on the soldering method? I couldn't find anything on google.
Well as I said earlier, I just did the soldering method and forced my hw locked vibrant into download mode and restored with Odin. Unless you modify your hardware or flash something special to get rid of the hardware lock, the volume/power key combinations don't work.
Edit:
gonintendo said:
Can you please link me to an article on the soldering method? I couldn't find anything on google.
Click to expand...
Click to collapse
Here's the guide. Its pretty hard to mess up so don't worry.
http://forum.xda-developers.com/showthread.php?t=819551
I have a question about using this method:
once boot the phone by odin, is the phone going back to a
fresh state or with all the saved contacts/apps backed up
with Titanium Backup?
I am having trouble to boot the phone when I tired to restore to 2.1 update1.
Rooted, backed up with TB, then flashed to Obsidian V4, Froyo 2.2.
Now I want to restore to 2.1 so that I can get all my contacts back.
Thanks for help.
roguly said:
Just a suggestion:
1:Open ODIN
2:Connect USB cable to computer (not phone)
3:NOW, connect USB to phone
4ress POWER, VOL. UP, & VOL. DOWN at same time and HOLD (yes i read that ur hardware locked but just try )
5:Wait for first Vibrant logo to appear, and as SOON as it dissapears...release ONLY the POWER button. Keep hold on both volume buttons.
Uh sorry if this didnt work but atleast it was worth a try.
*words in caps are keypoints, im not angry
Click to expand...
Click to collapse
Haven't seen this mentioned yet, but something that has worked for me many times is this:
-Take battery out
-connect phone to the power chord (best to do it while connected to the computer)
-hold both the volume up and down buttons at the same time
- insert the battery into the phone while still holding buttons
You should see download mode pop up and you're ok to release the buttons after that. Now you're free to odin it up.
villaparv said:
I have a question about using this method:
once boot the phone by odin, is the phone going back to a
fresh state or with all the saved contacts/apps backed up
with Titanium Backup?
I am having trouble to boot the phone when I tired to restore to 2.1 update1.
Rooted, backed up with TB, then flashed to Obsidian V4, Froyo 2.2.
Now I want to restore to 2.1 so that I can get all my contacts back.
Thanks for help.
Click to expand...
Click to collapse
By restoring with Odin, all your stuff will be wiped out, but think on the positive side, at least you don't have to carry a broken phone around with you all the time now. Unless you put your backups on the external SD card, not internal 16gb memory, then maybe take out the SD card before restoring.....
And as a precaution to those who don't want to end up in the same situation as me, don't use nandroid to backup and restore a 2.1 backup when you flashed a 2.2 rom.
2.2 roms will flash a 2.2 froyo kernel to your device and then the 2.1 backup will flash a 2.1 image to it, therefore causing your phone to brick.
-----------------------------------------------------------------------------
And again, no method by pressing the physical hardware keys will work on Hardware locked model vibrants. Even taking the battery out or plugging in the USB won't work as these functions have been "disabled" by the lock. I'm pretty sure the soldering method is the only effective way to force your phone back to download mode and to restore to factory conditions. I've spent at least 39882884385820384872 different combinations with the battery pulling, USB plugging, holding key combinations and they don't work.
Zeltex said:
So basically I rooted my vibrant, and realized it was hardware locked, as in recovery/download key combinations don't work.
I installed clockwork Mod recovery and backed up my system using the backup function. I then proceeded to flash the "Obsidian V2 - JK2 Official Froyo Based 2.2 - Team Whiskey" rom.
When that was done, I think I made a mistake by restoring the backup before restarting the phone before the first boot. Therefore, I am now stuck on the Vibrant/Samsung first boot screen.
I've researched a bit on how to get the phone into download/recovery mode on hardware locked models and none of the methods I found worked. A friend told me that apparently there was a method by using heat and a soldering iron....but if possible I want to avoid that unless its the last thing I can do to restore it.
Extra Info:
I had ADB turned off on phone before flashing ROM
It is samsung Vibrant Tmobile version, not Bell, and its hardware locked.
What I think the cause of the problem was that I restored a backup from 2.1 immediately flashing the v2.2 rom. Maybe I should have booted first into the new rom before trying to restore any backups...
When I plug my phone into the computer it starts charging (Battery icon with amount and animation of dots works)
I've tried using Droidexplorer as well but it doesn't detect my device.
My device makes the connection sound when connected to windows.
So hopefully, if you have any ideas for how this can be fixed with ODIN or how to get the phone back to the stock ROM, or even how I can force my phone into recovery or download mode without using a soldering iron then that would be extremely helpful. Thanks in advance
Click to expand...
Click to collapse
had the exact same problem only diff is that i was kinda doing while snoozing off
nd when i was in recovery mode i deleted ALL USER DATE nd stuff.
right now i followed most of the comments nd now i'm on DOWNLOAD mode connected to the computer i'm still trying to find out how to use ODIN to fix my phone think u can help me a lil.
Last year(late 2010, maybe mid November), I rooted my phone and flashed recovery with no problem s at all. Some time after that I added Apps2SD and that went smoothly with no problems for about a week. I purchased an 8 GB SD Card for more storage room and after I partitioned it and switched the cards my phone started acting up so i rebooted it. After that I was stuck in a boot loop, so i tried to flash it back to stock but it wouldn't take to it no matter how I tried, whether it be through recovery or SW Update. So then I tried Odin Multi loader(cant remember which version but at the time I made sure it was the one meant for the Intercept) after I flashed it with the Stock through Odin, the phone bricked. Now it will not turn on in any way(recovery or other) the only thing it does do is vibrate when I plug it in to a computer, and it will occasionally show battery life through the touch screen and keyboard buttons by lighting them, but as soon as the it is unplugged it is a brick. I see the little bit of functionality as a little bit of to be able to fix this phone whether through ADB or another function but I desperately need help with this. Can someone please help me fix this phone?
note: I currently have a Samsung Transform as my main phone so if the Intercept can't be helped then it's not that big of a problem.
I have the same problem! Please help!
When you root a phone you put the rom, and recovery onto the sd card. changing sd cards disrupts this process. Put the old sd card in and tell me what happens.
The phone doesnt come on at all
see if you can get it into download mode with the battery out.
Pull battery
connect to computer with usb
vol down + camera + end
If you get into download mode this way flash the stock.tar using SWUpdater.
Nope, it doesnt work, thx though
Ok I've got the same problem with my intercept as well, So i just like to add (maybe its just me) that when i plug my phone to the computer the phone shows that its still functions right (without the screen on), I'm able to make calls, and receive them as well (with the touch of the answer button) but just the screen doesn't turn on, AT ALL!, so KJON i don't know if your having the same problem as me but I'm just a noob and i wouldn't know what to do. But there's some ammo if you need it.
I HAVE THE SAME PROBLEM! i dont even know where /sdcard/sdx/zip/ is!
My phone is also a samsung transform and not and intercept and whenever i press vol down+ Power, only the function buttons at the bottoms light up but not the screen
i am a noob.
help?
noooooob here...i didnt wanna start another thread since i have this same problem, so i hope someone reads this..
couple days ago i bricked my sprint intercept i was using SWu and forgot to take the Binary files for the Moment out so now i cant get my phone to DL mode, ive been searching since saturday night and have tried every Button combo posted and nothing, my phone will not turn on and ofcourse it isnt recognized by my pc BUT, ive noticed that only when its plugged in to the computer after trying to power it up several times it´ll vibrate then the 4 touch buttons will react to either the call or end button, also it makes the low battery sound and if i press the camera button it makes the volume sound but i CANT get to download mode, can i bring my phone back or is it done with? help please! and thanks in advance...
well, i would say boot into rrecovery by making the phone off either power button, or remove and replace battery.
next, you will need to press and hold in order: power/end call, call, and volume down.. this should boot recovery mode.
lastly, use the red scroll device to go to reset facory defaults or factory recovery, use common sense while looking. select with clicking and use arrow back button to go back to recovery main, then reboot to system. easy as pie.
Have you tried ODIN or ADB?
I have flashed the Intercept numerous times, soft bricked more than once, I was always able to recover using either the stock bootloader, CWM recovery, or flashing the ROM/Kernel directly using ODIN or ADB.
If you are still having these issues drop me a line and I'll gather some links together that should get you back up and running.
If the phone will not boot at all, even with a charged battery, I would definately try contacting Virgin Mobile and escalating the issue. I've had plenty of luck replacing devices claiming that the device just dropped dead without notice. They are usually good about sending out a replacement phone, and on rare occasions even giving you an upgraded unit if they are out of stock.
Good luck!
Did you use Odin or the swupdater?
Bug difference. Sounds like there's a missing boot loader.
Sent from my SPH-L710 using xda app-developers app
Hi, did you guys fix your bricked phones? Today I have bricked my Samsung transform (bad flash went with SW upgrade.
Only vibrates sometimes and the buttons flash a little, but no boot at all. Is there any chance to fix it? even with Jtag?
regards
Hi all, sorry I'm a noob so please bare with me. /flameshield up. Anyways I've had a tmobile HD2 since it has been released and my brother is the one who has always tinkered around with my phone (no longer around), so I have no idea what he's done to it. Anyways right now it is currently running WP7 but it keeps restarting for me and sometimes all my data gets erased. I used to have android 2.2 on it but it also used to freeze up also. I was just wondering, is there a guide I can follow to go from WP7 back to Android 2.2 along with something that might help my phone stop freezing?
Your phone is restarting cuz of your sd card or it is incompatible with WP7. You need to format the sd card with panasonic formatter, full format btw. If that doesn't work, you need a new sd card.
To flash MAGLDR android do this:
Download a MAGLDR android build of your choice , don't ask me which please, all of them are great and oyur phone is compatible with all of them
power off phone
power on phone whilst holding power/end call button button
hold power button until a menu pops up
Using your volume keys to go up or down go to USB Flasher
Use the call key to select USB Flasher
Connect your phone to the PC.
From the android build you downloaded, go to its contents and run DAF.exe, in administrator mode btw.
Read and click next, if no read me pops up, ignore and keep going on.
Android should be installed.
For flashing a clockwork mod build, there are plenty of guides on how to, just search and read up on it.
Tyvm, I got android booted but it freezes when it says "Preparing SD card" I assume its my sd card thats making it freeze, so ill grab a new one and hope that works. I've also noticed that my phone gets very hot when it freezes, could it be that my cpu is working to hard, thus making it overheat and freeze?
Hello XDA-devs forums,
I'm having an issue since yesterday.
I have rooted my Huawei Ideos X5, and it ran fine for a day or so.
However, when my battery ran out it shut down into a completely blue screen.
When I tried booting it again, this just showed me a blue screen as well.
Now, I fixed this issue by connecting the phone to my PC after booting it with the Vol+ and Vol- pressed.
(So you get the pink/purple screen)
However, when I opened the phone on my PC, all I saw was a "239 MB" "empty" space, and it should have ~2GB..
I placed a backup copy I saved of my "image" folder in that 239 MB storage, and it booted.
However, today I hooked it up to my PC again to see if it magically changed..
And I couldn't access the 239 MB space anymore.
When I tried fixing the issue with a reboot of the phone, that just caused it to get stuck in a booting loop.
So now I'm stuck with a phone that keeps trying to boot itself,
and I can't access it on my windows PC.
I can, however, access 4 different folders of the phone on my linux notebook.
Now, my question is: can someone with a good understanding of problems like these please help me out?
I'm getting kind of fed up with it, as I've only got the phone for 2 days now.
Thank you in advance, and thank you for taking the time to read this.
Have you tried removing the battery for 5 minutes and then putting it back in?
After this, what happens when you press VOL+ and Power?
How about if you press VOL+, VOL- and Power, without the USB cable?
Hello Katu, thank you for posting.
Regarding your questions:
Yes, I have tried to take out the battery for 5+ minutes- it didn't change anything to the situation unfortunately..
If I press VOL+ and Power at the same time, the device boots into recovery mode.
In this I have tried to format the device in order to reset it to factory defaults, but this did not help either.
When I press VOL+, VOL- and Power, the phone boots into the pink/purple screen.
Can you try a custom recovery and a custom rom? I want to see if your onboard flash is borked.
u8800,cm7,[email protected]
I had the same when my phone got f*ucked up. Put the image folder, than download official rom, like b138 and install it. then check your imei. There is a change that it will be 0.
PlanDreaM said:
Can you try a custom recovery and a custom rom? I want to see if your onboard flash is borked.
u8800,cm7,[email protected]
Click to expand...
Click to collapse
Well, I used an original ROM:
U8800 V100R001C00B136(Overseas General version)
And that resulted in the boot.img being corrupted, so I can't even overwrite that anymore.
Also, this is what I see when I hit VOL+, VOL- and Power at the same time to boot into safe mode, and connect it to my PC.
img69 [dot] imageshack [dot] us/img69/244/10101191548pm.png
julle131 said:
I had the same when my phone got f*ucked up. Put the image folder, than download official rom, like b138 and install it. then check your imei. There is a change that it will be 0.
Click to expand...
Click to collapse
I installed the official B136 rom, and after it rebooted, it would just hang on a black screen.
(it used to show the IDEOS or Android logo when it booted)
Hmm mine came with this Rom
U8800 V100R001C00B135SP01 ( general )
Looking at your name you're from the Netherlands ( so am I )
where did you get this 136 version from ?
I would try to put this one on it
You have to put the 'dload' folder into the root of your SD Card,
then boot into boot-loader, after that it'll automatically flash back to the stock Rom.
1 Format SD card
2 On the SD card, create "dload" folder
3 Put the unzipped Rom into "dload" folder
4 Then boot to bootloader (pink screen)
Yes, mine came with that version as well.
However, I couldn't find it anymore and thus downloaded the version I said earlier.
Also, I did everything as you described, except step 4.
You have to boot to recovery instead of bootloader. (VOL+ and Power)
Anyways, I managed to get ClockworkMod's recovery.img on my phone,
and from there on install a custom ROM on the phone, which magically got it working again - even though it didn't work earlier.
Thank you for reading my thread and taking the time to reply to it.
My issue has been resolved.
just for the record, flashing a stock rom is different from flashing a custom rom..
the 4 steps described by Gman2oo6 is the correct way to flash a stock rom (and it is written clearly in the document that is in the stock rom zip file)
[edit]
step (1) is not a necessary step though..
Yeah, I noticed that.
What I did was format my SDcard with FAT32,
and put a custom rom (update.zip) on the SDcard.
I then booted ClockworksMod Recovery and installed the custom rom from the SDcard.
When I tried installing the stock rom, I just followed the PDF file's instructions that came with the stock rom.
hey i udated to GB 2.3.4 (official)and i didnt like the it cuz the wifif ddnt work and the bluetooth also the DATA so itryed to downgrade to 2.2.2 original official and it did the 2/2 steps intalled and when it restarted it did not want to turn on all that happened was it vibrated and thats all so i left it on like that and when the battery died i plugged it in to the AC and the LED turned on red and the touch kkeys also but not the screen so i really NEED help!
Try to turn it on with lead connected but no battery and see if you can start it.
My battery also went dead flat this morning and I couldn't get it started at all till I tried this. Once I got it started the only thing I could do was quickly pop in the batery and let it charge. Just leave off the cover till you get it going.
I have to add that I did not have the problem of a failed update to deal with but it may at least get you started
i tryed it
nope nothin good happened all that happens is a blank screen with nothin on ,LED is off and the touch keys are off. it justz vibrates and when i put the battery it turn the LED on to red and the touch keys turn on but then like 5 min later the LED and keys turn off
astewart said:
Try to turn it on with lead connected but no battery and see if you can start it.
My battery also went dead flat this morning and I couldn't get it started at all till I tried this. Once I got it started the only thing I could do was quickly pop in the batery and let it charge. Just leave off the cover till you get it going.
I have to add that I did not have the problem of a failed update to deal with but it may at least get you started
Click to expand...
Click to collapse
ok heres what i did i wanted to upgrade my phone to the newest version GB 2.3.4.So what i did was download the update and i followed the installation steps i successfully updated to Gb 2.3.4. so like i was checking how it look and the new feature but when i wanted to go on the android market i went to setting and turn on the wifi and it said Error and then i tried the Bluetooth and it said Error also so then i put my SIMs card in and i was like imma use DATA then and when i restarted my phone it had service but no HSPA+ or Edge or GPRS so like i just hatted my phone from their so then i was trying to root it but iddnt know how to do that so like i read this website and i got the UPDATE.APP or 2.2.2 AT&T did the same steps of the installation of BG 2.3.4 and it went to the process and 1/2 stepp good it passed and then 2/2 also passed it installed it and when it said Successively Installed it said Restarting and the scrren turn of and it vibrated and thats all that happened and i left it like that for the whole days and nothing happened
Do u got any idea?
When i connect it to my laptop it says installing drivers .then its says sucesfully installed drivers ready to use. so then i got to Device Manger and i check what has been installed and their it said USB Human interface device and HID-compliant device WHAT DOES THAT MEAN??
Not sure about the HID (human interface device) probably just the way windows sees the device for interfacing with it. With regards to the not booting I have read a lot of people saying that you need to factory reset and clear cache after the upgrade/downgrade. With the phone off, turn it on by long pressing volume+ and power on button till you get the blue recovery screen and from there you can reset factory/ data and also clear the cache. from what I see this should clear up the problem and start up. Please read this thread, it may help you somehow..... http://forum.xda-developers.com/showthread.php?t=1420728
Hope this helps a little
U mean Boot recovery and imma try it and thanks ill check it out
Sent from my MB300 using XDA App
all that i know is that if u customized your partition, it'll bootloop,
so go back to stock-partition ^^
How do I do that got like the steps or video?
Sent from my MB300 using XDA App
when i downgraded to 2.2.2 i installed this V100R001C00B138SP04CUSTC185D002
http://forum.xda-developers.com/showthread.php?t=1251250 got it from that link
Looks like you are not having much luck. Did you try to factory reset?
astewart said:
Looks like you are not having much luck. Did you try to factory reset?
Click to expand...
Click to collapse
well how do i do that do i need to got to the purple/pink screen or bot recovery cuz i cannot access that my phone doesn't do anything pretty much