Related
I searched and didn't find any previous postings regarding an issue with Parrot and Audi Hands Free (Bluetooth) car kits and the TyTn.
This issue is only with the TyTn and the Wizard devices work fine.
It seems to pair fine with the car kits but 5 minutes into usage...the TyTn turns the bluetooth off on the device.
Then about 1 min later, turns Bluetooth on again. The cycle then begins Off and then On ....
Here's a link on the Parrot forum.
http://www.parrot.biz/forums/english/viewtopic.php?id=2667
I've got the same problem with my Seat Leon (new model) bluetooth carkit !!!
I think it's the same module as in the Audi (all VAG related cars).
It's very irritating !
I hope they will fix it soon....
http://forum.xda-developers.com/viewtopic.php?t=58789&highlight=
:wink:
Er... not followed as far as parrot (down for maintennance) BUT
I've found with my Seat Leon kit that the phone needs to remain in a fully powered state - you can't put it into the sleepy state by the power button otherwise you get the intermittent but eventually endless dingling of it connecting and disconnecting.
Best way I've found is to leave it on asking for a password with the cover on.
edit: Should just point out that you also need to turn off any power off settings - except for the backlight.
Pyranwolf said:
Er... not followed as far as parrot (down for maintennance) BUT
I've found with my Seat Leon kit that the phone needs to remain in a fully powered state - you can't put it into the sleepy state by the power button otherwise you get the intermittent but eventually endless dingling of it connecting and disconnecting.
Best way I've found is to leave it on asking for a password with the cover on.
edit: Should just point out that you also need to turn off any power off settings - except for the backlight.
Click to expand...
Click to collapse
I'm going to try this !
I hope that it works.
Thanks anyway.
What kind of Leon do you have ?
I've got an A6 with BT kit and am having this problem. I cannot make/receive a call whilst running my BT GPS device & TomTom, although from reading this the issue may be the Audi kit anyhow.
Are there any fixes available - be it HTC or Audi? Or are there any work-arounds, such as add-on software for the TyTN??
Please help - it is driving me mad. Spoiling what is otherwise a great piece of kit.
I have been having this exact problem with my Audi A4 with Audi Bluetooth.
I did wonder if it was in some way connected with the phone going into sleepy mode as it is being powered by the phone battery.
Also, the bluetooth stops responding after 5-10 minutes, but if I am continously using the phone, it seems to be ok.
Therefore, I think I need to buy an in car charger, and see what happens...
Has anybody else tried this that can confirm it works?
Markee
Just a quick note to Paul_o
My Audi A4 / SPV M3100 / Tom Tom / Bluetooth GPS work fine together.
If I am in Tom Tom, and get an incoming call, the little call window pops up over Tom Tom, Tom Tom carries on and the phone audio is routed through the speakers - the only irritating thing is that the Tom Tom lady keeps interrupting... :wink:
Mark
Hi,
I'm using Vario 2 with Audi Bluetooth and also having the BT ON - BT OFF issues.
These are my findings.
- Without JETWARE software:
- BT goes ON and OFF in the car regardless of the VARIO 2 being on or stand-by, or the phone being battery powered or connected to the car.
- Once a conversation is started the BT connection seems to be remain ON.
- With JETWARE software
- If I leave the screen always on the BT connection stays always ON. Only backlight automatic switch-off is selected
- I have tried several screen toggle programs (which claim that they only power down the screen) but the BT goes OFF in the car after a few minutes.
I'm happy to test any other proposal.
Cheers,
C
What version of JetWare are you running, they have a beta which has settings for the Audi kit, this may help, there is also a registry setting that is meant to change the power settings when bt is connected. An extract from an email conversation with Jetware...
We have also addressed the power issue, but this fix requires a registry change. Please create a DWORD registry value in HKLM\Software\JETware\AGExt named InSessionPower with a value of 0 (valid values are 0-4, with lower values indicating greater power availability). This will tell the OS that the Bluetooth device should stay at full power while it is in a Hands-free session.
Not sure if this will help, my Hermes is ariving on Monday, I'm was hoping that all the problems i've had with my magicain and the audi kit would go away with the Hermes, but maybe not.
Give the key a go and let me know
Hi dh,
thanks for your reply.
I haven't installed the Beta version yet. However I have changed the registry setting and will test first thing tomorrow. If this doesn't fix the problem I will try the Beta version with the Audi setting.
I'll keep you posted.
Cheers,
Carles
Hi dh,
I have tested the two proposals (Change in the registry and the Beta version + Audi settings) without much luck. The BT connection with the car keeps going ON and OFF when the phone is running on battery.
Have you got your Hermes? any luck?
Thanks,
Carles
Got my Hermes (Orange M3100) a couple of days ago. I've installed the JetWare extention, and without the InSessionPower set the connection is dropped. So far with the setting applied it has stayed connected. I have had other problems like not being able to make calls etc, which is a bit of a issue. I need to do some more testing, as i've been messing with the phone a bit.
I'll update here in a couple of days
Must say i'm very disapointed with the phone regarding this. A couple of weeks ago i had a Wizard which worked flawlessly with the JetWare extention, no power issues, calls made and received without a single problem. I wonder what has changed with the bt implementation between the Wizard and the Hermes?
Hi dh,
You will see from my previous postings I have had the same problems too.
It should be noted, though, that the Vario (wizard) worked flawlessly with the Audi A4 Bluetooth without Jetware software.
Has anybody been able to prove there is no problems if the phone (SPVM3100) is powered whilst in the car?
Cheers
Mark
I have a factory fitted hands free system in my Vauxhall. Every other phone you can think of works with it...EXCEPT my XDA mini. It seems to pair up, but there is no signal showing from the carkit. It might work for a minute and then it drops out. Is it the XDA or Vauxhall that's at fault? It seems that nobody knows the answer and I paid serious money for this bit of car kit. I like the phone, it really is annoying. I have tried another XDA mini as well and that doesn't work either. Does anybody else have a Vauxhall with the same built-in system and not connecting?
Markee
I've had the phone plugged in without the registry entry and it seemed to be ok. If I can get to a stage of a working solution i'll test again without the registry entry and with external power.
dh said:
Must say i'm very disapointed with the phone regarding this. A couple of weeks ago i had a Wizard which worked flawlessly with the JetWare extention, no power issues, calls made and received without a single problem. I wonder what has changed with the bt implementation between the Wizard and the Hermes?
Click to expand...
Click to collapse
I'm guessing that since they went from BT1.1 to BT2.0 they had to make a new stack.
My Wizard worked PERFECTLY on my Parrot, my TyTN is almost useless on it.
you make a very good point ScottC, that'll be what it is.
Just driven home and could not make a single call with Jetware installed. Removed it and i could at least make a call, but i didn't get any status info or phone book. I didn't get a chance to leave it connected without Jetware for longer enough to see if it disconnected without external power, i imagine it will. I will test some more later/tomorrow. I'll also send an email to Jetware to see what there thoughts are regarding bt v2.0 and their product
Hello,
I have an Audi A3 with the factory fitted Phone kit but without the Audi Craddle so I'm using the Bluetooth connection.
I have tried the Vario (Wizard/QTEK 9100) and Vario 2 (Hermes/TyTN) and had similar problems with the two of them. Once the connection is stablished I can make and receive calls without problems. The issue is that the BT connection goes ON and OFF without an apparent reason.
The only thing I have seen is that when the Vario is kept on (only the backlight is off) the BT connection normally stays ON, regardless of the phone being powered or not.
I have tried Jetware, the Beta version, the registry entry, programs to switch off the screen...but haven't seen any real difference.
I have bought a bluetooth USB stick and will do some test at home to see if the problem is with the car or the phone.
I called T-mobile and they said it was a faulty phone, but I don't think so.
Keep the postings, we might end up finding a solution
Cheers
C
Try upgrade the BT software. I had the same problem after that i upgraded de Parrot software. Now i have the version 4.16
Hello and thanks in advance for any help - i have read all over the web and cannot find the solution I need, so I turned to XDA
I have a Fuze and I had purchased a Bluetooth Kenwood receiver for my car before I purchased the phone. Both devices are Bluetooth 2.x and I have had success pairing the devices (more than once). The problem now is the Kenwood is "filling up" with devices and stating it is FULL, not allowing the two to pair when I get in the car. If I disconnect the battery to the car, it resets, allowing me to re-register the Fuze with the Kenwood. but, again, after about 5 pairings it fails again.
Any help as to why the Fuze is sending new information each time, or maybe why the Kenwood unit does not recall the pairing after it fills up? This head unit worked with my Sony Ericcson W580 and W810 just fine, as well as my brother's LG Shine and Razor.
Thanks for your help and advice!!
Ben
I have a problem where my HD2 does not work properly with my Land Rover Freelander 2 in-built bluetooth car kit.
The HD2 pairs with the car and I can search my phone book, see my last dialled number, I can even dial a number, BUT, the phone does not connect properly - the car radio should cut out and phone audio come through the car speakers, but instead the radio just continues to play. And shortly after the call is connected to the other party the line is terminated.
My Nokia phone works perfectly with my car, but this phone does not. Even my Sony Ericsson Xperia X1 did not for properly with the Freelander 2.
I did manage to make one successful call, but after I stopped and restarted the car, the problem returned!! Arghhhhhhhhhhhhhhh!
So, does any one know of a fix? Surely hands free/car kit is a standard?
Help!
same problem here. i have a bluetooth car stereo. Always worked fine with my previous HTC's. But now with the HD2 i get the exact same problems as you... I think it's software bug. i have rom version 1.43.404.1 NLD
i hope this gets sorted out cause i use bluetooth audio streaming a lot in the car....same for handsfree calling
Paired it with my Pioneer FH-P80BT on my way to sell my 3GS and recieved a call. Got the same issue as described above - just a bug i presume.
I'm experiancing similar problems. All works fine (incoming call's or outgoing call's) but they get disconnected randomly it seems. I'm using a JVX NX7000 by the way. No problem with my iPhone. Hope they fix it soon!
I tested it with my BMW Idrive last night which is notoriously difficult and it worked fine, I was really surprised tbh! But was able to recieve and make calls, the stereo cut out and could see the phone book too. With my N82 i was only ever able to make/receive calls.
Same problem - Jaguar XF - it docks ok but I have to initiate calls from car (vs phone). Just some weirdness going on...
glenner05 said:
same problem here. i have a bluetooth car stereo. Always worked fine with my previous HTC's. But now with the HD2 i get the exact same problems as you... I think it's software bug. i have rom version 1.43.404.1 NLD
i hope this gets sorted out cause i use bluetooth audio streaming a lot in the car....same for handsfree calling
Click to expand...
Click to collapse
Mercedes brutality
I have a new Mercedes C, and when the HD2 is connected over bluetooth I get an extremely loud, strange ringtone when receiving a call. It is so loud it could really make your shoes go off.
Also it is none of the ringtones available to choose from, inside the phone - it sounds more like a BIOS beep from a PC and hits me while the normal ringtone is playing as well.
It definitely comes from the phone, not from the car stereo. I have not figured out how to resolve this, I think it is outright dangerous for unprepared drivers.
I have a Nissan Pathfinder; it paired ok, and dials from the Pathy without probs. Ringtone is ok too. Sound quality seems better than my old Tytn so all in all v happy.
Doesn't stream music, but that's Nissan's fault, not HTC.
Works fine with the Ford BT system in the Ford Focus (2009).
HTC HD2 Pairing with a Freelander 2 - SUCESS!!!
Success!!!
So far so good, I applied a known change to the HD2 registry and I am now making and answering calls without fuss!
Change Registry setting:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Sys
Add the DWORD setting COD=5374476
This makes devices see the HD2 as a 'Normal' phone.
Hope this helps everyone.
graemenwallace said:
Success!!!
So far so good, I applied a known change to the HD2 registry and I am now making and answering calls without fuss!
Change Registry setting:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Sys
Add the DWORD setting COD=5374476
This makes devices see the HD2 as a 'Normal' phone.
Hope this helps everyone.
Click to expand...
Click to collapse
Hello i have same problem with my BMW X5. Can you explain better your steps ?
graemenwallace said:
Success!!!
So far so good, I applied a known change to the HD2 registry and I am now making and answering calls without fuss!
Change Registry setting:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Sys
Add the DWORD setting COD=5374476
This makes devices see the HD2 as a 'Normal' phone.
Hope this helps everyone.
Click to expand...
Click to collapse
Interesting, I have a similar problem with my 2009 BMW 3 I explain here (sorry I posted before discovering this thread) and I'll try your registry tweak.
But you say that it is "a known change" to the HD2, could you tell us where you saw it ? Is there another discussion about the BT stack somewhere or more generaly about the Widcomm implementation in the HD2 ?
The HD2 being so recent and in short supply, I'm a bit surprised something like that is "well known"
Thanks for your help.
It works !
graemenwallace, I just tried after applying your tweak and... OMG, this is AWSOME man, it just WORKS !
I still just have one gripe though, it seems that the car doesn't always receive the RF level correctly at the first connection. Sometimes it sees the phone as having no carrier at all (no bars in the RX level display), preventing the car to make any calls, but as soon as I receive a call, the level resets to full bars and I can pick the call and make calls myself after that.
When the first call comes in, I can see the display with no bars and a "?" appearing on top of it for a short time before it becomes full bars.
So there is still some compatibility problems, but at least now I can pick-up incoming calls without risking my life.
So I suppose you are a potential life saver then
Thanks mate,
Yves.
Bluetooth is working YES with JVC KD-AVX44 ADV49
After the registry tweak from graemenwallace the bluetooth connection is working properly with my car radio (JVC KD-AVX44/KD-ADV49).
The phone functions ok now (incoming & outgoing calls) Also the AD2P connection is super (very good sound)
Also the ID3 tags are functioning (didn't function with the X1 Xperia)
I see the track title now into the JVC display
Skipping etc. all is functioning. I will tell HTC about it because I have a ticket running for this issue. I think they have to solve this issue
Big thanks for this trick
By doing a little search on the net, it seems like graemenwallace suggested that this problem is not new with smartphones that identify themselves as such.
The tweak above forces the BT stack of the phone to identify itself as a standard phone instead of a smartphone.
What's puzzling is that my BMW handsfree worked with other smartphones so far, including the iphone.
Anyway, it's ok now, but I wonder what bad press this will cause to HTC.
The majority of the users are unaware of this kind of wizardry and this justs adds up to the long list of bugs of the HD2.
When I first got the phone a few days ago I was rapidly convinced to return it immediatly as it's fancy interface wasn't enough to overcome all the shortcomings. It was plain unusable as a business phone.
Now after applying most of the tweaks, it begins to show potential, but HTC really has to work on the problems we can't fix by tweaking the registry.
I tried this also, but for me it didn't work.
But my situation is a bit different, as I am not able to connect the HD2 through the Sim Access Profile with my car, which is an Audi A6 mit Bluetooth preparation and I have also the Audi rSAP Adaptor installed in the centre arm rest.
My problem is, that I get a connection to the car, but SAP does not activate and I can't get access to my phonebook - so I only have kind of a handsfree profile...
Am I right that you all use the handsfree profile in your cars and no SAP?
jah said:
Works fine with the Ford BT system in the Ford Focus (2009).
Click to expand...
Click to collapse
Does your Ford system have the Bluetooth audio choice?
I get my Ford Focus changed every six months coz i'm a driving instructor and it comes as part of the deal.
On my last Ford Focus my htc tytn 2 connected ok and I could make and receive calls ok.
However, when the new car was delivered the Ford system had bluetooth audio choice and ipod integration which the other one didn't.
Now my htc tytn 2 didn't connect very well at all.
Now with my HD2 it does connect only if I have the bluetooth audio profile selected.
But now the music player keeps appearing and wants to play music all the time. If I pause the music on the phone it just starts replaying.
Anyway I will try the registry tweak in this thread and hopefully that will solve the problem.
Paul.
Jolig said:
I tried this also, but for me it didn't work.
But my situation is a bit different, as I am not able to connect the HD2 through the Sim Access Profile with my car, which is an Audi A6 mit Bluetooth preparation and I have also the Audi rSAP Adaptor installed in the centre arm rest.
My problem is, that I get a connection to the car, but SAP does not activate and I can't get access to my phonebook - so I only have kind of a handsfree profile...
Am I right that you all use the handsfree profile in your cars and no SAP?
Click to expand...
Click to collapse
I have the same problem. I`ll try to pair my HD2 with MB C-klass using SAP but i can`t get them connected it seems like a SAP adaptor can`t activate a PIN input window on HD2 (i guess). With other phones it works perfect (tryed with Nokia 5800, 6500).
Shark_Abuser said:
I have a new Mercedes C, and when the HD2 is connected over bluetooth I get an extremely loud, strange ringtone when receiving a call. It is so loud it could really make your shoes go off.
Also it is none of the ringtones available to choose from, inside the phone - it sounds more like a BIOS beep from a PC and hits me while the normal ringtone is playing as well.
It definitely comes from the phone, not from the car stereo. I have not figured out how to resolve this, I think it is outright dangerous for unprepared drivers.
Click to expand...
Click to collapse
could you pls describe, how did get them paired? when i try to pair them, i see the device`s id, try to "call" it, see pin code and after that i hear the descending tone. and it nothing occurs. SAP is enabled, device is discoverable, what else? Any idea?
Jolig said:
I tried this also, but for me it didn't work.
But my situation is a bit different, as I am not able to connect the HD2 through the Sim Access Profile with my car, which is an Audi A6 mit Bluetooth preparation and I have also the Audi rSAP Adaptor installed in the centre arm rest.
My problem is, that I get a connection to the car, but SAP does not activate and I can't get access to my phonebook - so I only have kind of a handsfree profile...
Am I right that you all use the handsfree profile in your cars and no SAP?
Click to expand...
Click to collapse
I feel your pain, my wife has a GolfPlus and the rSAP instalation is crap.
It's overly expensive and useless if you don't have one of the few phones compatible with it.
Unfortunately, many customers are falling in this trap, thinking it is a standard handsfree, but it is not, it is a full GSM build-in which only access your phone SIM card to log into the network and download your contacts.
In the case of my wife, the dealer was honest and clearly stated that it was a mistake to order this option.
The only problem is that he had no other alternative than proposing an Parrot retrofit which wasn't really an option for me as it wasn't integrated in the car and certainly not in the navigation system.
But internet is your friend and the solution is quite simple, the Kufatec kit.
This is brilliant, it is a small box that connects to the CAN bus of many german cars and integrates perfectly into existing navigators, it uses the steering wheels command buttons and so on.
It is much better (more functions) than original BT options, is tailored to each brand so that the displays are in the same style as the original ones etc.
More interesting, it is field upgradable (just a laptop with BT) so that it is potentialy compatible with anything existing or not yet.
And it only costs a fraction of this crappy rSAP option.
In your case, the good news is that it can simply replace your actual rSAP kit for a minimal installation fee. (the CAN bus has to be reprogramed however, so professional instalation needed)
There is another solution: to replace the unit you have (it is situated under the driver's seat) by a skoda unit. This unit has the same connector but is simple handsfree instead of rSAP.
Hope this helps.
Hi there,
I am planning to buy this very nice phone. However, I own a BMW 1 series (sept 2007) with a factory build in bluetooth carkit (BMW iDrive system) and I was wondering whether this phone will work without any troubles on this carkit. Maybe some of you are using a similar combination. Google and this forum don't give me much information, but maybe that's a good sign?
I hope you can help me!
ruudonline said:
Hi there,
I am planning to buy this very nice phone. However, I own a BMW 1 series (sept 2007) with a factory build in bluetooth carkit (BMW iDrive system) and I was wondering whether this phone will work without any troubles on this carkit. Maybe some of you are using a similar combination. Google and this forum don't give me much information, but maybe that's a good sign?
I hope you can help me!
Click to expand...
Click to collapse
Well it works on my 525 series yr 2009. Even the names gts displayed on the screen .
Ok thank you!
I think I will give it a try.
I used to have a HTC Blackstone that worked perfectly with my BMW serie 1 and I now switched to the HTC Legend... The phone's great but I had issues with my car...
First I tried connecting it to the carkit (had a long trip to do), it was a bit tricky, and didn't try phonecall...
Then someone called me, the carkit just rang and I couldn't talk in the implemented microphones, neither the speakers didn't link the sound ... I had to stop the car and answer directly on the phone.
Half an hour later, I was using the GPS, listening to the radio, the radio just stopped and then followed all the Idrive system !
It came back few minutes later, as i drove back home...
My car may have issues but I tend to think the phone isn't so innocent about all this...
I have a BMW Series3, and although I can make calls alright, I can see my phonebook, neither does it logs calls...
I have 3 main devices that I pair to my phone via bluetooth: watch/lg tone/car
The watch stays paired with no issues, but the watch is having issues swapping from the lg tones to the car and vice versa.
Anyone found a remedy for this?
As of now, I have to go into the bluetooth settings of the one I don't want to use and deselect media/phone, then go to the other and select media/phone. And even sometimes this takes multiple times to work.
My previous phone (gs7) had no issues swapping from the two.
Hi,
Did you get a solution ? I face the same problem and can't find any solution...
Just to clarify, when you are in your car and want to connect to it, the headphones are turned off, correct?
Having similar issues... Every time I try to connect to my car (stock Subaru WRX), I have to manually connect and it takes several attempts before it connects. Once it connects it usually doesn't drop though. Very frustrating...
Another poster resorted to getting a whole new head unit: https://forum.xda-developers.com/oneplus-5/help/sony-xav-ax100-bluetooth-issues-t3634940
ArkAngel06 said:
Just to clarify, when you are in your car and want to connect to it, the headphones are turned off, correct?
Click to expand...
Click to collapse
It's not in my car but with the bluetooth device of my motorcycle helmet. The reference is ncom bluetooth kit 3. I have to connect it manually and it takes several attempts before it connects. Sometimes it doesn't connect at all....
I have 2 headset Plantronics Backbeat Pro and Plantronics Backbeat Fit. They both work flawlessly
My Huawei Watch also works.
But my Nokia 616 Car kit wont connect at all.
And my motorcycle hemlet bluetooth kit, Cardo scala rider PACKTALK, connects, but the audio is slowed down to about 80 percent?
Same thing here.
I have been facing problems with a Sony SBH52 Headset and with my Opel Corsa E, stock infotainment system.
It gives me a hard time connecting but when it does it's stable.
I had the same with my gen 1 Moto 360 but after a factory reset to the watch and a reboot it's stable.
Sent from my ONEPLUS A5000 using Tapatalk
yubimusubi said:
Having similar issues... Every time I try to connect to my car (stock Subaru WRX), I have to manually connect and it takes several attempts before it connects. Once it connects it usually doesn't drop though. Very frustrating...
Another poster resorted to getting a whole new head unit: https://forum.xda-developers.com/oneplus-5/help/sony-xav-ax100-bluetooth-issues-t3634940
Click to expand...
Click to collapse
I had the same issue with my TSX. I did some research and cleared the cache. Worked like a charm afterwards. Did not have the issue one week since doing that
suizdude said:
I had the same issue with my TSX. I did some research and cleared the cache. Worked like a charm afterwards. Did not have the issue one week since doing that
Click to expand...
Click to collapse
Ahem, I seem to be unable to find bluetooth in my app settings. Can you please give me a hint?
It's been driving me crazy these days with my SBH-52 and I want to try this too.
Thanks!
P.S.
I'll also give it a shot with a plantronics pro headset I have to see if it does the same.
Bluetooth profiles implementations, even though they passed certification, are not always made equal! So don't end up pulling your hair if a certain BT device doesn't play nice with another.
Just as an example... Head Unit X had big issues with the initial contacts sync, right after pairing with Samsung phones (already known to sometimes play around some other standards). It would only work after several reconnects. After several weeks of debugging (poor development guys) and reproduction test (poor testing guys) it was concluded that it is a phone issue caused by some wrong timing delays in the process of exchanging information between the HU and the phone. Samsung was informed and the ticket was internally closed.
I have similar problem with Bluetooth Earbuds. Phone simple doesn't "see" the Earbuds. But strange - it can see other Bluetooth devices and other devices can see Earbuds.
I'm sure this is a OnePlus 5 software problem.
Version OxygenOS 4.5.10
i have somhow issue as urs, i have Bluetooth pad lock and android watch, it sometimes connected and sometimes not, i do believe its software issue, im on 4.5.11
Yes, it is strange. After some restarts and on/offs connection suddenly appears