Hello and thanks in advance for any help - i have read all over the web and cannot find the solution I need, so I turned to XDA
I have a Fuze and I had purchased a Bluetooth Kenwood receiver for my car before I purchased the phone. Both devices are Bluetooth 2.x and I have had success pairing the devices (more than once). The problem now is the Kenwood is "filling up" with devices and stating it is FULL, not allowing the two to pair when I get in the car. If I disconnect the battery to the car, it resets, allowing me to re-register the Fuze with the Kenwood. but, again, after about 5 pairings it fails again.
Any help as to why the Fuze is sending new information each time, or maybe why the Kenwood unit does not recall the pairing after it fills up? This head unit worked with my Sony Ericcson W580 and W810 just fine, as well as my brother's LG Shine and Razor.
Thanks for your help and advice!!
Ben
Related
Has anyone had any problems pairing their X1 with any Nissan or Inifniti cars? There seem to be some mumblings on the web about their cars and WM6 devices and I've had no luck getting it to work on my '08 G35. Thanks.
bluetooth pairing
i just checked the aproved phone list for your g35 and the x1 is not aproved by infiniti. only certain phones will link to our cars others will not
I have an 08 G35 and have no prob. pairing it with my car. How are you pairing this up with the car?
it also depend if you both have navagation or not
elee888 said:
I have an 08 G35 and have no prob. pairing it with my car. How are you pairing this up with the car?
Click to expand...
Click to collapse
I don't have the navigation so I just click the phone button, tell it I want to pair a new device, and have my X1 start searching. At least now I know it can be done. Thanks for the reply
Well... I do have the navigation. So maybe the pairing process is a little different. But it should work though, it even allows me to download the whole phonebook into the car. Something my other phones in the past did not allow me.
baashha said:
Managed to solve this now.
Of course both Merc & SE didn't have any good solutions.... so had to continue googling & XDA-ing... This is what I did:
i.) Jetware, as I posted earlier has been removed.
ii.) I still had the SAP Profile addition downloaded from one of the forums in XDA on.
iii.) Change Registry setting:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Sys\COD
the default is 5898764 (Decimal) which is "Telephone (Smartphone)" which you would think would work. Changed to 5374476 (Decimal) which is a normal phone.
iv.) Restarted the phone.
v.) Started the pairing process from the car - failed as per before.
vi.) Started the pairing from the phone, and they work!!
Now, they pair automatically as how they would before....
Ram
Click to expand...
Click to collapse
this is how i got mine working with my pioneer deck.
here's the link to the SAP Profile he was talking about.
http://forum.xda-developers.com/showpost.php?p=997872&postcount=166
hope this works for you.
which PIoneer do you have?
I have the DEH-P5900IB and a BT adapter, and i can't get my X1 connect.
All my previous phones worked fine.
it looks like the X1 won't let me pair without passcode, and the radio says Error.
Do you mind explaining exactly how you did it?
Thanks
i have the DEH-790BT.
what i did was after i changed what i mentioned above, then i set my deck to be able to be noticed by other bluetooth devices, then added it through my X1. After I added it through my phone it said successfully connected on my deck and the phone displayed it connected as wireless stereo and hands free. now the only weird thing was it was trying to connect as both the wireless stereo and hands free which seemed to mess with the deck, so I had to turn off my ignition and turn my car back on for it to actually recognize the connection fully. oh and the passcode if you connect through the deck to phone like I did it should be default '0000' but i would check your manual just to be safe, and if your connecting through your phone to the deck (which i haven't tested so I don't know if it works) you can pick your own passcode, which i suggest just making 0000 or nothing.
I have a problem also with my HTC Touch HD (Blackstone)
I can pair with my Nissan Qashqai carkit but soun dis very bad, and the caller on the otherside doesn;t hear anything.
Strangly, but try, when during a call i switch from carkit to phone and back (using the options in my carkit/buttons on stearing wheel) everything is fine!
Checking the internet learned me that this is related to the bluetooth stack (or settings) in WM6.1 (and 6.5 also)
So does anybody have any idea how to solve this, maybe by registry changes or maybe by even "downgrading" the Bluetoorh stack to 6.0 or maybe even 5.x.
Maybe it is also possible to replace the complete MS stack for an other stack?
Hi folks, I have a Touch 3G which is causing me a major headache at the moment, as the phone will pair via Bluetooth correctly, and will make short calls out, but almost always will not answer inbound calls and when it does will drop them almost immediatly.
The phone has the latest os and patches from HTC and the BMW kit has been checked at the service centre.
There are no issues when the car is used with Nokia's of Sony Ericsson's.
Have any of you had problems with the phone and car kits before and if so any work arounds for them?
Many thanks in advance,
Tichy
I have used mine on a 5 series with no issues.
Hi- been using orange jade for 6 months with BMW E60/530 bluetooth no problems at all
Having problems with my Droid X and car system connecting via Bluetooth.
Random problems:
Often fails to connect at all, other times connects fine or partial.
Transfers the phonbook sometimes and other times it does not.
Connects the audio fine and not the Hands Free.
Sometimes I need to re-pair the entire setup to get it to work at all.
Sometimes I need to power both the phone and receiver down and back up to get it to work.
Does anyone have any ideas on a solution?
It's driving me crazy, want to use the Bluetooth both for the Hands Free and audio streaming.
Droid X, Android Version 2.2.1, System Version Verizon.2.3.340.MBB810.Verizon.en.US
Car System:
Kenwood KDC-X994, built in Bluetooth.
Bluetooth version 3.12.0
My wife's iPhone works fine with this receiver using the Bluetooth.
Thanks
Sorry, my DX connects every time I get in my car (Ford Sync system). Have you tried connecting it to other Bluetooth devices to see if it's maybe the phone itself?
No I have not tried it with another system.
An excellent idea but at this time I do not have access to another receiver with Bluetooth.
Did get an answer from Kenwood that it was not tested with the Droid X but was tested with the Droid.
Wonder if it could be a phone or receiver problem. I need to come up with a way of testing both units on a continuous basis.
The last two days it has connected just fine, but Friday evening it was giving problems.
Thanks for your help.
You can try finding a little cheapo Bluetooth USB receiver from a local store, use it with your laptop or PC, and try pairing your phone with it. Then after you're done testing just return it (make sure there's an open box return policy though!).
sfreemanoh said:
You can try finding a little cheapo Bluetooth USB receiver from a local store, use it with your laptop or PC, and try pairing your phone with it. Then after you're done testing just return it (make sure there's an open box return policy though!).
Click to expand...
Click to collapse
Thanks,
I will give that a try, maybe this weekend if I get time.
i have the same phone and Kenwood radio. What I needed to do was this:
Delete any bluetooth devices in the Kenwood radio.
Delete the paired Kenwood device in your phone.
Make the Kenwood discoverable, scan for it with the phone. Once the phone finds the Kenwood pair with it. When the Kenwood requests PBAP access, click allow ONE TIME ONLY. This is the key. I saw the Kenwood send the request several times. If I confirmed the request more than once, the unit acted flaky. Hopefully this will fix your issue. It did for me!
I will give that a try.
The Kenwood does download the phone book everytime it connects.
Sometimes it says completed very quickly and then the HF fails.
Other times it will neve finish downloading.
Thanks
The vast majority of car stereos that support Bluetooth A2DP are notoriously fickle with it. I went to a Car Toys last July after getting my Droid X, and tested literally about 20 different car stereos with playing music over Bluetooth. Half of them would not even pair, most of the rest had various problems like wouldn't play music or it skipped/cut out a lot, etc. Only three manufacturers had multiple units that worked flawlessly: Pioneer, Clarion and Parrot. I asked one of the guys there if this was normal, and he said yeah, A2DP was very poorly supported in most car stereos but that he knew some of the manufacturers were working on making it better for the next year's models.
This doesn't help you, but even though your wife's iPhone works and your DX doesn't, it's unlikely the problem is with your DX.
Roland,
Thanks for the info. Interesting there are so many problems with car stereos.
I will definitely keep this in mind the next time I buy a car stereo.
One interesting item is I rented a Ford Escape for a week and my Droid X worked flawlessly with the Ford factory stereo.
Go figure. It was the high end factory unit, Sat radio, USB port, Bluetooth all built in.
HI, recently moved from iPhone4 to the Arc and love every bit of it...except the bluetooh pairing with my car's (Audi Q7 2G MMI) handsfree.
Pairing is intermittent and even when it's paired, the connection seems to drop off within seconds.
Does anyone else have the same problem especially with Audis?
Generally, they do that until the phone book transfers across - i know that's the case for the RNS-E. I have a RS4, did it all the time when I first got it with my Blackberry (had 2500 contacts). Just leave the car on accessory with the phone in the garage. I couldn't stand the dong noise everytime it connected disconnected.
Could be worse, I just got the AT&T branded Samsung Focus, it won't even connect with the bluetooth in my Audi or my wife's RR.
OliverOllie said:
Generally, they do that until the phone book transfers across - i know that's the case for the RNS-E. I have a RS4, did it all the time when I first got it with my Blackberry (had 2500 contacts). Just leave the car on accessory with the phone in the garage. I couldn't stand the dong noise everytime it connected disconnected.
Could be worse, I just got the AT&T branded Samsung Focus, it won't even connect with the bluetooth in my Audi or my wife's RR.
Click to expand...
Click to collapse
Thanks for the reply mate. When I did manage to pair them up, I could see all my contacts on the MMI's display previously. It's only recently that thsi connect/disconnect issue happened and it has certainly gotten worse today where I couldn't even hold a pair for more than 5 seconds.....
In that case - no idea.
Try deleting it on the phone and pairing again? Seems like a strange one.
OliverOllie said:
In that case - no idea.
Try deleting it on the phone and pairing again? Seems like a strange one.
Click to expand...
Click to collapse
Did that as well. Tried restarting, deleting and repairing - still no joy.
may have to flash my phone and try again as a last resort....sigh...
have you tried contacting Audi to see if there is a firmware update for the car?
There is a chance even of the car is brand new the software version the phone\ stereo system is using is a few years old.
Just a thought.
Eskimo427 said:
have you tried contacting Audi to see if there is a firmware update for the car?
There is a chance even of the car is brand new the software version the phone\ stereo system is using is a few years old.
Just a thought.
Click to expand...
Click to collapse
hey thanks for the reply. Yeah thought about that too and that's an avenue which i may explore with audi.
having said that, the condition has improved somewhat...it's still intermittent but at leeast it's now 'stickier'. What I did was I uninstalled the last 5 applications that I put in prior to the this happening and it worked.
No idea why.
I have 3 main devices that I pair to my phone via bluetooth: watch/lg tone/car
The watch stays paired with no issues, but the watch is having issues swapping from the lg tones to the car and vice versa.
Anyone found a remedy for this?
As of now, I have to go into the bluetooth settings of the one I don't want to use and deselect media/phone, then go to the other and select media/phone. And even sometimes this takes multiple times to work.
My previous phone (gs7) had no issues swapping from the two.
Hi,
Did you get a solution ? I face the same problem and can't find any solution...
Just to clarify, when you are in your car and want to connect to it, the headphones are turned off, correct?
Having similar issues... Every time I try to connect to my car (stock Subaru WRX), I have to manually connect and it takes several attempts before it connects. Once it connects it usually doesn't drop though. Very frustrating...
Another poster resorted to getting a whole new head unit: https://forum.xda-developers.com/oneplus-5/help/sony-xav-ax100-bluetooth-issues-t3634940
ArkAngel06 said:
Just to clarify, when you are in your car and want to connect to it, the headphones are turned off, correct?
Click to expand...
Click to collapse
It's not in my car but with the bluetooth device of my motorcycle helmet. The reference is ncom bluetooth kit 3. I have to connect it manually and it takes several attempts before it connects. Sometimes it doesn't connect at all....
I have 2 headset Plantronics Backbeat Pro and Plantronics Backbeat Fit. They both work flawlessly
My Huawei Watch also works.
But my Nokia 616 Car kit wont connect at all.
And my motorcycle hemlet bluetooth kit, Cardo scala rider PACKTALK, connects, but the audio is slowed down to about 80 percent?
Same thing here.
I have been facing problems with a Sony SBH52 Headset and with my Opel Corsa E, stock infotainment system.
It gives me a hard time connecting but when it does it's stable.
I had the same with my gen 1 Moto 360 but after a factory reset to the watch and a reboot it's stable.
Sent from my ONEPLUS A5000 using Tapatalk
yubimusubi said:
Having similar issues... Every time I try to connect to my car (stock Subaru WRX), I have to manually connect and it takes several attempts before it connects. Once it connects it usually doesn't drop though. Very frustrating...
Another poster resorted to getting a whole new head unit: https://forum.xda-developers.com/oneplus-5/help/sony-xav-ax100-bluetooth-issues-t3634940
Click to expand...
Click to collapse
I had the same issue with my TSX. I did some research and cleared the cache. Worked like a charm afterwards. Did not have the issue one week since doing that
suizdude said:
I had the same issue with my TSX. I did some research and cleared the cache. Worked like a charm afterwards. Did not have the issue one week since doing that
Click to expand...
Click to collapse
Ahem, I seem to be unable to find bluetooth in my app settings. Can you please give me a hint?
It's been driving me crazy these days with my SBH-52 and I want to try this too.
Thanks!
P.S.
I'll also give it a shot with a plantronics pro headset I have to see if it does the same.
Bluetooth profiles implementations, even though they passed certification, are not always made equal! So don't end up pulling your hair if a certain BT device doesn't play nice with another.
Just as an example... Head Unit X had big issues with the initial contacts sync, right after pairing with Samsung phones (already known to sometimes play around some other standards). It would only work after several reconnects. After several weeks of debugging (poor development guys) and reproduction test (poor testing guys) it was concluded that it is a phone issue caused by some wrong timing delays in the process of exchanging information between the HU and the phone. Samsung was informed and the ticket was internally closed.
I have similar problem with Bluetooth Earbuds. Phone simple doesn't "see" the Earbuds. But strange - it can see other Bluetooth devices and other devices can see Earbuds.
I'm sure this is a OnePlus 5 software problem.
Version OxygenOS 4.5.10
i have somhow issue as urs, i have Bluetooth pad lock and android watch, it sometimes connected and sometimes not, i do believe its software issue, im on 4.5.11
Yes, it is strange. After some restarts and on/offs connection suddenly appears