Related
Found this link from a post in Wizard section yesterday:
http://www.jetwaremobile.com/index.htm
As the doc says this extension has a SIM access profile, I tried this BT extension on my Universal and a Bluetooth Headset SE HBH-662 that has a Caller ID screen. With this BT extension, now the BT headset can show the Caller ID Name IF the contact name and number exists in the SIM card.
However, it will not show any caller name if the contact only exists in Outlook Contacts.
My test also shows, the number stored in the SIM card has to be exactly the same with one sent over by the operator, otherwise it will not show the caller name. Ex. if the operator sends over the caller number as 171xxxxxx and the number stored in the SIM is 71xxxxxxxx then it will not work. Same thing if the number stored in the SIM is +171xxxxxxx and the operator sends the number 1713xxxxxx then it wil not work as well.
I kind of like to use the format +171xxxxxxxx as this is the international format.
Anyway, this is great, as most people have been waiting for this function to work out of their caller ID BT headset. Now, if we can find out how to make it work to access the Outlook Contact, then its perfect...
Can you report back on your experiences with this? I'm reluctant to install it unless it's proved to work and be reliable with my Jabra BT800.
Mach
Hi guys !
I'm just trying it in my 9000 with Jabra BT 800
In the site linked by lie_ui I read:
Configuration
The JETware Hands-free Extension allows control of the phonebook and messaging information that is provided to Hands-free devices. To configure these options run the Hands-free Config application which is installed in the Bluetooth Options folder in your start menu.
I don't find any new icon or service and i can't see the caller number
Have you tried this application ?
:wink:
I believe in Jwright's Modified ROM there is an application called "SIM Access" that allows this. I was not able to try it because I don't have a headset with caller name capability. I forgot to copy the "BT SIM Access" application, but already tried it on the latest QTEK ROM a month ago and the application worked fine.
Thanks cktlcmd
Now i search for "Sim Access" in the forum
I keep you update :wink:
Diggia said:
Hi guys !
I'm just trying it in my 9000 with Jabra BT 800
In the site linked by lie_ui I read:
Configuration
The JETware Hands-free Extension allows control of the phonebook and messaging information that is provided to Hands-free devices. To configure these options run the Hands-free Config application which is installed in the Bluetooth Options folder in your start menu.
I don't find any new icon or service and i can't see the caller number
Have you tried this application ?
:wink:
Click to expand...
Click to collapse
If you go to Start Menu\programs you'll find the Bluetooth options folder. By the way, don't forget to soft reset first.
I've tried with Parrot CK3100 and now I have the battery and network signal strenght status as well as network name. I'm expecting someone to try with BT800 and to report it.
i've tried out the software i must say i'm impressed that it actually displaying caller's name. however my main problem now is my i cant activate voice dial now. before the software if i was to push the button the headset voice dialin would kick in. but after installin it, caller id works but the voice dialings malfunction. is anyone else having this problem as well?
i've tried out the software i must say i'm impressed that it actually displaying caller's name. however my main problem now is my i cant activate voice dial now. before the software if i was to push the button the headset voice dialin would kick in. but after installin it, caller id works but the voice dialings malfunction. is anyone else having this problem as well?
Click to expand...
Click to collapse
Yes, same happens to me.
I have the HBH-662, after installing the software the button on my headset does nothing when pushed, unless it is pushed for answering a call, although the name gets displayed when getting a call, provided that the name is on the SIM card.
The other bad thing about it is, if the name is NOT in the sim, it does not display the number, it displays "Unknown" on the headset!
Good step in the right direction though, now it only needs a few tweaks!
Cheers
JP
on my bt800 don´t show the name of the caller
Same here on my BT800 no name just number
hi,
i've tried out the software but i can't activate voice dial now. how can do?
bball4life said:
i've tried out the software i must say i'm impressed that it actually displaying caller's name. however my main problem now is my i cant activate voice dial now. before the software if i was to push the button the headset voice dialin would kick in. but after installin it, caller id works but the voice dialings malfunction. is anyone else having this problem as well?
Click to expand...
Click to collapse
Try checking your "Notifiaction Que". There should only be one sddaemon file. If there is a duplicate then delete it. I use MemMaid for this.
please give me a hand to resolve this problem with vocal dialing.
marcowind80 said:
please give me a hand to resolve this problem with vocal dialing.
Click to expand...
Click to collapse
As I mentioned above, the last time I had a problem with voice dialing was when a duplicated "Notification Que": sddaemon file to be exact, was present. Just delete the duplicated sddaemon file, soft reset, and pair your BT headset again. I used MemMaid's Notification Que to clear duplicated files. I hope this is clear enough.
ok i'll test your suggest....thank you.
excuse me for bad english, i don't speak well this language!
i'm italian
nothing..
not vocal dialing
BT extention
I have another problem in addition to the voice dial problem...... whenever I receive a call from soneone who is using a service provider other than my service provider the device hangs and I have to soft rest the device provided that all the contacts are stored in my SIM card.
Great achievement indeed!!! A first step into a long waited direction
However decided to uninstall it from my Universal, waiting for a new release.
In fact some improvements are required to make it really useful.
I've tried it with my Jabra BT800.
A few issues that I've noticed,
Name displayed, only if:
[list:cca8e10c8e]
Contact present into SIM card.
Outlook phonebook not being used (at least with BT800) despite announced as a feature.
In order for the correspondent name to be displayed, number must be stored into Contacts, exactly as sent by the Operator.
- Some operators do not send the '+CountryCode'.
- This may originate different behaviours for instance depending if user is at Roaming or not.
- Some sort of algorithm would be welcomed to add some "intelligence" here.
[*]If received phone number is not present into SIM card, or not exactly with the same format, 'Unknown' is displayed even in the event of a number being sent... :shock:
The number received should be displayed at these circumstances.
[*]Whenever a Contact name gets displayed, only its first 8 characters are shown.
Much better if complete name contained at Contact, would scroll continuously. :idea:
[*]Voice Speed Dial not working, if JETware Mobile Software is installed.
This is a must, to be solved![/list:cca8e10c8e]
Eagerly waiting for a next release
I agree with the summary listed above. As I listed already in the very beginning of this posting what I found. Yes, its also true that Voice Dialing is not longer working once this app is installed. I did not have Voice Dialing enabled indeed, I tweak the registry so that on the push of the button on the BT headset, it will turn on the BT headset to accept any sound from the PDA instead (I use this for VoIP application).
And now this is not longer working, so similar synthom with the Voice Dialing app.
Once last thing, I cannot uninstall this app.
So for those that have not tried it yet but insterested to try, I would recommend not to try it, just read what we have found so far here, and do not need to repeat the same experience.
Hopefully those guys who write this app read this posting as well and will make the fix.
Not to rain on anyone's parade, but my JAM with its lowly Windows 2003 Mobile SE has been showing the contact name if it exists on the SIM without any modifications on my SE HBH-662.
I made this observation about a year ago on HoFo and six or so months ago right here on XDA-Dev.
This is interesting to say the least.
Sorry if this has been asked but i could not find it through search.
If i try to transfer file or picture or ringtone to another phone i dont have beam by bluetooth.
The manual says right click then beam file but this only opens infra red screen.
I dont seem to have bluetooth for transfering but i can connect to other devices and use hands free in car no problem.
Any ideas?
Clive
creynish said:
Sorry if this has been asked but i could not find it through search.
If i try to transfer file or picture or ringtone to another phone i dont have beam by bluetooth.
The manual says right click then beam file but this only opens infra red screen.
I dont seem to have bluetooth for transfering but i can connect to other devices and use hands free in car no problem.
Any ideas?
Clive
Click to expand...
Click to collapse
You need to edit the registry to enable OBEX transfer:
http://forum.xda-developers.com/viewtopic.php?p=289941#289941
it still doesnt work
even with that registry tweak, it won't show any options to transfer files. any other solution?
how do you see registry
cant find registry how do i get into it to edit it
clive
I found out that that reg tweak does the same as in Start-Settings-Connections-Beam. Tick the box receive all incoming beams and the setting in the registry switches from 0 to 1. I do not advise anyone to change it to a 1 in the registry, since that means that your infrared port is also active all the time, which is battery consuming.
For sending a file, turn on bluetooth and tap and hold the file in File Explorer. Than select beam file. It will start with looking for infrared ports but after it finds none, it will automatically continue to look for bluetooth connections. it will then ask the other device to accept the connection and start sending. For receiving a file, you have to tick "accept all incoming beams" in the settings-connections menu as well.
Concluding: there is no beam by bluetooth menu, it is the same menu that the infrared connection uses. It is somewhat tiresome that it starts with IRdA first, perhaps a reg hack can change that, but I don't use it often enough to find out.
looks correct
hmm !
seems to be ok i tried this and it transfered files i hid my nokia in the draw but it found it immediately on the infrared screen seems to be saying it is sending by infrared but i thought that would not work if they were lined up.
Will try with nokia in another romm then will be convinced it is sending by bluetooth
thanks for your help
clive
You're welcome. It is not very clever design, hiding the BT interface in the infrared beam menu, but it does work! Be sure it is sending by BT, for infrared there has to be a line of sight connection, so putting your Nokia in a drawer rules out infrared.
I have been a pocketpc windows CE user for years and I loved the "send via bluetooth" and "send via email" options whenever I pressed and held on a file or a selection.
What happened to those?
How do you email 63 pictures from your phone?
i think its called beaming now. beam through bluetooth.
Ok I go to:
File Explorer
Press and hold on a file name
Select Beam File
"To beam, select a device.
Searching
NO RESPONSE.
Here is funny part!
I select more than one file and the SEND AND BEAM both go GREY!
Send...
Beam File...
maybe u have to do it one at a time
also, the BT device that its going to has to be on and ready to accept BT files before you can even see the device when searching. some devices have to be configured also.
If you got a Commanager with a Beam button it has to be enabeld to. Then you´ll find other BT-Devices
Thanks everyone
BEAM?
The wing doesn't have IR, does it?
no but BT works for me only with Beam enabled...
hkbladelawhk said:
The wing doesn't have IR, does it?
Click to expand...
Click to collapse
Basically BT took over infrared when you refer to beam.
That is correct, the Beam... feature actually uses bluetooth. The problem is that is does not show your paired devices or even the device names around you. So if I have 10 bluetooth phones around me and I want to send a picture to my friend sitting next to me, I may end up sending it to a stranger (90% chance)
u can see who send to
as long as the recipient has their name in their owner information on thier phone, it will show thier name on the list... you just have to wait a few more seconds before it shows on the list... i send files from my mda to wing and it shows unknown device first, and then a few seconds later it shows the name of the device
I spent a couple hours sorting through blog posts, downloads, cabs, blah blah blah... with the goal of getting my forsaken Treo Pro (WM6) to use VOIP through my office's SIP/Asterisk setup.
To save you all some headaches, here's the distilled version of what I found to be the best combination of software and quick hints for install:
I started with this blog post, to give credit..
http://voipguides.blogspot.com/2008/05/voip-sip-client-for-windows-mobile-6.html
But I used different software... so I've included a zip with the package of all the stuff I installed to make the damn thing work.
1) Install all of these:
- voipdrivers.cab
- custelvoip.cab (works better than MajikVOIP.cab)
- sipconfig.cab (originally named SipConfigTool_2_0_1.CAB)
- audioroute.cab (from http://www.teksoftco.com/index.php?section=freeware)
I've also included setupvoip.cab .. which is a fancier SIP setup tool, and may work better than sipconfig... but I used sipconfig originally, so that's what I'm writing up here.
2) Restart your phone
3) Run sipconfig ... enter all of your sip configuration details, and also use the menu option to enable VOIP over 3G if you desire it.
4)Now go start -> settings -> personal -> Phone. Choose ther Internet Calling tab. Set the option for "whenever available".
5)On the main/Today screen you will see a phone icon with description VOIP ( you entered name of provider VOIP in (step 4). It'll show you the status of whether or not it has registered with SIP. A Hint, you might need to trick the phone into connecting to 3G first... e.g. by browsing the web... otherwise WM6 at least doesn't seem to auto-connect to 3G for SIP.
6) After connecting using 3G or wifi, You will see the status displayed as VOIP: Available.
7) You can now make calls as normal, or receive calls in.. and everything is routed through VOIP.
8) You'll notice that many WM phones will route the audio through the rear speaker (annoying) .. which is why you installed audio router from teksoft... it adds a little icon on your top system tray to let you change between earpiece and rear speaker for audio. There's a bunch of audio switchers out there. This is the best one by a mile. And it actually works.
Cheers,
Andrew Eross
Thanks for your effort. Similar tool is already posted as Schap - Setup voip Tool -
http://forum.xda-developers.com/showpost.php?p=1364611
Thank you!!!
I've looked around for a guide as clear as yours. You've the best guide all around... Thank you a bunch...
Thanks for your great job. I new on Windows Mobile so I need a lot this kind of help.
I download and followed your installation procedure on a HTC 3G+, T3238 (chinese version of the HTC 3G, manufacturer HTY Taiwan)
Works well, Hope others also will be successfull
By the way, is there an also simple way to sending DTMF tones for remote control of my answering machine? When I try to send numeric keys after the call is connected it looks like I start a new connection with numbers actually for remote control of my answering machine.
Hi, I'm also in the club that has browsed hundreds of post looking for a setup of VOIP and also looking for a solution on good incoming sound level when using Voip on phone. Your files solved all my problems!
Phone: HTC HD2 Norwegian with Rom 1.66. Use the Norwegian company www.iplink.no for VOIP at home / office and (now) on my mobile phone.
Made my own ipdialplan.xml which can be found attached to this post.
Done some testing calling people through Voip: after approx 1 minute the connection falls down. I looks like I'm still connected to the other part (interface shows that a call is going on) but none of us can hear the other part. I then have to cancel the call in the phone interface. Make new call to same person, after approc minute the connection goes down again...
Is there some kind of registry setting that controls this "timeout"?
Hi, this tools does work also on windows mobile 6.5?
I know that on the HTC Fuze some of the wmvoip.cab installs breaks the GPS - anyone test this yet?
THanks!
does this work on hd2
I've done everything you said, but I can't find the option to show internet calling is available. I have Kumar 1.5 installed, and am about to try another ROM (maybe Laurentis, the SIP drivers are cooked in). What are you running?
shah_vm said:
does this work on hd2
Click to expand...
Click to collapse
yes, it does!
Best Voip All in one solution. Try This
http://forum.xda-developers.com/showthread.php?t=596682
I tried last night to no avail. I am guessing that using a WM6.5.x ROM stops me, because I can't access the right settings (start-settings-personal-home or phone) because my settings button takes me straight to the black screen of text version. I even tried to go to a 6.5 ROM (cooked with VOIP drivers in), and even then I couldn't get the VOIP phone icon to appear on the today screen. Every time I selected it from the Internet tab in the setting, it would just ignore my changes.
I would love to get this working with a nice cooked 6.5.x ROM, and am not giving up yet, but man is this frustrating. As a side note, I am learning lots about the workings of WM.
sidelait said:
yes, it does!
Click to expand...
Click to collapse
thanks for the reply. i have also installed i was able to receive incoming call but unable to make outgoing call. are you able to make outgoing call?
Okay, I feel like an idiot, but I figured out how to enable the internet calling tab on my HD2. I am still apparently learning lots about WM6.5. After I disabled Sense, I could add tabs to the today screen. I did everything right, but the voip tab just either says searching or not active. And it somehow disabled my data connection. Not sure anymore, almost through trying ROMs. Is everyone else running this on a stock ROM, or are there certain features that interfere with this?
VOIP almost working
I've implemented Internet Dialing and have SIP configured my my provider and I am able to receive calls. But, I notice that when I dial out a "9" is put in front of the number I'm dialing making it impossible to dial a number correctly. How can I change this?
forepj said:
I've implemented Internet Dialing and have SIP configured my my provider and I am able to receive calls. But, I notice that when I dial out a "9" is put in front of the number I'm dialing making it impossible to dial a number correctly. How can I change this?
Click to expand...
Click to collapse
You need to edit your ipdialplan.xml. It's in your windows directory. Basically it is set up by default to dial a 9 and in area code 425... If you look at it you should see where to edit it... There's also a utility knocking about here to set up a basic one for other countries...
Can't svae ipdialplan changes
I can open Total Commander find the file and make the changes to ipdialplan.xml by taking the "9" out of the 10 digit plan and the 7 digit plan, but I can't save the changes. I get "Error, could not create file" every time.
It's either open or write protected. Edit on the PC. Copy it over with a different extension. Rename the original, and then rename the new one to the right name.....
I have this very strange problem.
I have tried to install all this, but it works only partially.
Outgoing calls work and the receiving party can hear me. However, I don't hear them. Also, on incoming calls my phone doesn't respond at all.
Does anyone have any idea what is the problem?
I'm having a Topaz @ WM65.
ive tried the voice command software that came with my hd2. and works really well. i cant get it to compose a text message or email... does the preinstalled voice command allow us to compose a text message by voice? are you guys using tell me? which app is the best app for controlling media, text messages,opening programs, calling contacts, viewing appoinments etc with the hd2?
Thank You
Voice cammand is great, Tellme not so much
Voice command, as you may have already learned, works great with no training. You can voice dial, control media playback, hear your next appointment, and have callers annouced through your BT. Absolutely essential for me while driving. It will not allow you to dictate texts however. Thats really the piece that I was hoping Tellme would fill in, but it just doesn't seem to work as advertised on their website. To be fair, I've never seen it used on a device that came with it installed. It might work like a champ on those handsets, but it's never worked at all for me.
EDIT: I see you can't edit the title of your post. . .
Voicecommand not announcing bluetooth?
Crissg. In your reply you mention Microsoft Voicecommand announcing callers in bluetooth headset. Have you gotten that feature to work? I tried to get it to announce calls through bluetooth for two days with no success. Does yours work. If so how did you set it up.
Voice Command
Hi! As a "newby", I can't find any voice command on my HD2. Is it buried somewhere or was it a download. I'm in GB with Vodafone. LOVE MY HD2!!
Thanks!!!
wlm... start, settings, menu, all settings, personal, voice command.
in regards to settings as wlm wrote. is it ok for us to make a folder named control panel, and cut all our settings programs and move them to the control panel folder? anyone do this before?
xtacybyme said:
wlm... start, settings, menu, all settings, personal, voice command.
That's it.
in regards to settings as wlm wrote. is it ok for us to make a folder named control panel, and cut all our settings programs and move them to the control panel folder? anyone do this before?
Click to expand...
Click to collapse
Not sure. Making a folder with shortcuts to the setting might work, but personally I wouldn't think about moving that stuff from where it lives.
polera257 said:
Crissg. In your reply you mention Microsoft Voicecommand announcing callers in bluetooth headset. Have you gotten that feature to work? I tried to get it to announce calls through bluetooth for two days with no success. Does yours work. If so how did you set it up.
Click to expand...
Click to collapse
No set up needed other than ticking the option in the settings menu.
wlm said:
Hi! As a "newby", I can't find any voice command on my HD2. Is it buried somewhere or was it a download. I'm in GB with Vodafone. LOVE MY HD2!!
Thanks!!!
Click to expand...
Click to collapse
It is a download. Do a search and you will find plenty.
I can make the VC work on the phone just fine, but I have an ANT in the car, for BT.
When I try to talk with no car noise, or with car noise, the phone goes stupid, does nothing, well, beeps some kind of talk back, like dumb ass I did not understand you
Tried everything to get bluetooth voice announce
Crissg, I have checked the box to announce calls actually spent two days with Tmobile tech trying to get Voicecommand to announce over bluetooth but no luck. That is why I was wondering if you have this working on your phone. If so did you do any registry changes. I tried everything
Hi CRISSG,
Thanks - tried to locate it, but it's not there. Must be a download. Is the one you are using a WM app? IF so, where did you find it? There seem to be many apps - some with real problems, and I don't want to go that route!! HTC HD2, on Vodafone.. THANKS!!!!!!!
It is there in the T-Mobile US ROM, my understanding is that not all ROMs include it by default.
It came preinstalled
bigfry said:
It is there in the T-Mobile US ROM, my understanding is that not all ROMs include it by default.
Click to expand...
Click to collapse
Looks like the files are in the Windows directory of the device. I'm not educated enough to pull it out in a usable fashion. Have you checked the ROM threads? Possibly one of the chefs has already cabbed it up?
I just realized that I'm almost always the one doing the calling from the car, and I hadn't actually recieved a call on the new HD2 (while driving) to verify the annoucement function yet. I just tested it, and it is ringing in the s9 headset, but annoucement comes over the speaker. Interesting. Commands for calls and media and calendar are working fine. As soon as I can get my wife off her phone, I'll get her to text me while I've got the headset on to test that as well.
Edit: It plays the assigned sound for recieving a text over the headset, but is not announcing the message like it did on my Tilt. Sorry if I gave the impression that it was. Like I said, I use it every day, but I make way more calls than I recieve when I'm in the car. Now I'm with you guys wondering why we've lost funtions that we had before.
Edit #2 Was just in the car, and got a text. It was announced through my Jabra earpiece. So it might have something to do with the BT profile being used, as annoucements didn't work with the s9 that I use around the house.
No option of Voice Command in my T8585
xtacybyme said:
wlm... start, settings, menu, all settings, personal, voice command.
in regards to settings as wlm wrote. is it ok for us to make a folder named control panel, and cut all our settings programs and move them to the control panel folder? anyone do this before?
Click to expand...
Click to collapse
Regretfully in my HD2 , T8585, ROM: 1.48.405.2(71294), Manila:2.5.19211619.0
- there is no such option at all in the
above mentioned path: start, settings, menu, all settings, personal, voice command.
another HD2 n00b
I have been trying for a few days no to get voice set up. I too am UK with vodafone. No voice buit in. I have bought retail MS voice command 1.6 and it fails to install. Cyberon voice speed dial installs. The next problem I have is that, I want to be able to trigger voice calls vial my bluetooth headset. (plantronics 370 explorer) Neither this or my old Jawbone bt headset will trigger voice calls.
I really want to get the MS voice command to work as it looks great and ou don't need to train it. Any help really appreciated..
For all the uk users just do a Google search for microsoft msvc 1.6.21725
I am using this on my HD2 with no problems.
Announcements of callers doesn't work though.
Thats great thanks for this. Appeared to install fine. Not sure if it insatlled right though. I can find it in setting>other>voice command. Looks only to be settings in here. I can't get it to run or prompt for voice.
try pressing and holding the green send key
Thanks for this. I have a green "Talk" button when in phone. Pressing this or long press just call the last number.
The button on my Jawbone activate the voice, which is cool, but the button on the plantronics explorer still does nothing. I guess it is something incompatible with this. Typical eh as this is my favourite headset for out walking. It is great on a windy day.
xtacybyme said:
ive tried the voice command software that came with my hd2. and works really well. i cant get it to compose a text message or email... does the preinstalled voice command allow us to compose a text message by voice? are you guys using tell me? which app is the best app for controlling media, text messages,opening programs, calling contacts, viewing appoinments etc with the hd2?
Thank You
Click to expand...
Click to collapse
What Voice Command Software came with the HD2? Which version of the phone are you referring to?