I have been a pocketpc windows CE user for years and I loved the "send via bluetooth" and "send via email" options whenever I pressed and held on a file or a selection.
What happened to those?
How do you email 63 pictures from your phone?
i think its called beaming now. beam through bluetooth.
Ok I go to:
File Explorer
Press and hold on a file name
Select Beam File
"To beam, select a device.
Searching
NO RESPONSE.
Here is funny part!
I select more than one file and the SEND AND BEAM both go GREY!
Send...
Beam File...
maybe u have to do it one at a time
also, the BT device that its going to has to be on and ready to accept BT files before you can even see the device when searching. some devices have to be configured also.
If you got a Commanager with a Beam button it has to be enabeld to. Then you´ll find other BT-Devices
Thanks everyone
BEAM?
The wing doesn't have IR, does it?
no but BT works for me only with Beam enabled...
hkbladelawhk said:
The wing doesn't have IR, does it?
Click to expand...
Click to collapse
Basically BT took over infrared when you refer to beam.
That is correct, the Beam... feature actually uses bluetooth. The problem is that is does not show your paired devices or even the device names around you. So if I have 10 bluetooth phones around me and I want to send a picture to my friend sitting next to me, I may end up sending it to a stranger (90% chance)
u can see who send to
as long as the recipient has their name in their owner information on thier phone, it will show thier name on the list... you just have to wait a few more seconds before it shows on the list... i send files from my mda to wing and it shows unknown device first, and then a few seconds later it shows the name of the device
Related
Has anyone noticed that when you enter contacts and select a person, once you try to access the "send via bluetooth" option as in wm2003se it seems to have dissappered in WM2005 on the imate jasjar,
Although a cool device, a bit on the slow side, i've had to hack the device to death in order to get any decent speed gains out of it. Bluetooth doesn't seem to offer any services like Obex file transfer. Could this be why all connection to other bluetooth devices fail seeing as the profile in Bluetooth is unsupported on Firmware version JASJAR_WWE_11353_137_10301.zip ??
Cheers
Cliff
this is in WIKI
To change the ability to receive files via Bluetooth (OBEX)
The setting is at 'HKEY_LOCAL_MACHINE\Software\Microsoft\Obex'
The 'IsEnabled' DWORD value should be set to '1' to enable OBEX and '0' to disable OBEX.
For example, to enable the ability to receive fles via Bluetooth
HKEY_LOCAL_MACHINE\Software\Microsoft\Obex\IsEnabled = 1
says receive so i dont know about send, try it!! might be it
how about explore other devices
I was beaming file to JasJar without the hack for some reason. Still works ok for me now :?
i aint tried, i hardly ever use bluetooth, soz bub
thanks a bunch Carnivor
will try this now
it worked !
I can now recieve files via obex
Cheers once more
kewl, i just recalled reading OBEX in WIKI, definatly worth a shot that worked for you.
If you turn on "receive incoming beams" u can receive BT files without the hack. The above is no longer just for IR, hence the red AND blue icon.
Any ideas what folder it puts the received files in?
Can you change it?
craigiecraigie4 said:
If you turn on "receive incoming beams" u can receive BT files without the hack. The above is no longer just for IR, hence the red AND blue icon.
Click to expand...
Click to collapse
So does this mean if we turn OFF "receive incoming beams" it also disables a part of the bluetooth functionality?
Sorry if this has been asked but i could not find it through search.
If i try to transfer file or picture or ringtone to another phone i dont have beam by bluetooth.
The manual says right click then beam file but this only opens infra red screen.
I dont seem to have bluetooth for transfering but i can connect to other devices and use hands free in car no problem.
Any ideas?
Clive
creynish said:
Sorry if this has been asked but i could not find it through search.
If i try to transfer file or picture or ringtone to another phone i dont have beam by bluetooth.
The manual says right click then beam file but this only opens infra red screen.
I dont seem to have bluetooth for transfering but i can connect to other devices and use hands free in car no problem.
Any ideas?
Clive
Click to expand...
Click to collapse
You need to edit the registry to enable OBEX transfer:
http://forum.xda-developers.com/viewtopic.php?p=289941#289941
it still doesnt work
even with that registry tweak, it won't show any options to transfer files. any other solution?
how do you see registry
cant find registry how do i get into it to edit it
clive
I found out that that reg tweak does the same as in Start-Settings-Connections-Beam. Tick the box receive all incoming beams and the setting in the registry switches from 0 to 1. I do not advise anyone to change it to a 1 in the registry, since that means that your infrared port is also active all the time, which is battery consuming.
For sending a file, turn on bluetooth and tap and hold the file in File Explorer. Than select beam file. It will start with looking for infrared ports but after it finds none, it will automatically continue to look for bluetooth connections. it will then ask the other device to accept the connection and start sending. For receiving a file, you have to tick "accept all incoming beams" in the settings-connections menu as well.
Concluding: there is no beam by bluetooth menu, it is the same menu that the infrared connection uses. It is somewhat tiresome that it starts with IRdA first, perhaps a reg hack can change that, but I don't use it often enough to find out.
looks correct
hmm !
seems to be ok i tried this and it transfered files i hid my nokia in the draw but it found it immediately on the infrared screen seems to be saying it is sending by infrared but i thought that would not work if they were lined up.
Will try with nokia in another romm then will be convinced it is sending by bluetooth
thanks for your help
clive
You're welcome. It is not very clever design, hiding the BT interface in the infrared beam menu, but it does work! Be sure it is sending by BT, for infrared there has to be a line of sight connection, so putting your Nokia in a drawer rules out infrared.
Hi,
I have this annoying problem with my Prophet. I cannot transmit or receive files through bluetooth. I thought it is a WM 5 thing, but it works on my friends smartphone and dell PDA.
Did i do the ROM upgrade incorrectly, or is this inline with the patch of bad luck that i am getting with my prophet?
Cheers,
Oz.
Hi
Go to settings>connections>beam and make sure its ticked to "recieve all incoming beams"
To send files just search them using the provided file explorer, tap and hold and then select "beam file"
IT will then search for nearby BT devices. Click tap to send.
You can beam to loads of ppl at once as well, so thats cool.
The one thing I cant work out as of yet is how to change my default recieve directory from My Documents. I want to recieve files on my storage card *grrr* but I guess it will ahve to do for now.
Beaming a file searches INFRARED ports nearby as far as i know.
To send files via bluetooth i (try to) use RESCO EXPLORER which has "send file to bluetooth recipient" command but i've never succeeded. The transfer windows opens but closes suddenly. Even with the desktop set to receive file via bt tray icon.
Any clue?
I only tried this once but it worked fine (and it's odd that it did).
I selected "beam file" from the built in explorer while BT was open and another device with open BT was near by. It opened the usual dialog for IR, but then a second line appeared, the BT device (which had no IR port) was detected and I successfully transferred the file.
Odd, that BT doesn't have a separate interface, but if it works, it works...
Oh yes. It works via BT by beaming from File Explorer. I succeded to send a file to my PC at last. Thanx for the trick...
However the PC must absolutely set to RECEIVE FILE via BT tray icon even though its bluetooth is active.
X1 is my first WinMo phone. So maybe the following problems are really newbie questions, but I do found them annoying:
1. A contact can only have 1 mobile number? I have some friends that do have 2 mobile numbers, but I didn't find a field like "mobile 2" in Contacts.
2. How to beam files via bluetooth to non-discoverable paired devices? For example, I paired X1 with my lap-top, and set both to non-discoverable mode. One day I take a photo in X1, and want to beam it to my lap-top. But the beam in File Explorer can't use paired devices. It must search for devices every time.
Sometimes I want to send songs or pictures via bluetooth other people, how I do it?
Can someone please get me a guide?
Tell me if I'm working right ...
I click the Send but a song does not appear there option bluetooth
ZinGale said:
Sometimes I want to send songs or pictures via bluetooth other people, how I do it?
Can someone please get me a guide?
Tell me if I'm working right ...
I click the Send but a song does not appear there option bluetooth
Click to expand...
Click to collapse
First, go to Start > settings > connections > beam and turn on 'receive all incoming beams'.
Now open up your file explorer and find song you want to send
Hold down cursor or finger on this song and you should be presented with a list of options.
Don't select 'Send...', but instead select 'Beam File...' and then follow instructions to find other device using bluetooth
for me i need to add other person to my list and save it before is not sending