can someone explain me why when i pres down key it acts lik i`m pressing left key and when i press left sometimes goes down and sometimes goes left?is any solution.is keypad damaged?and when i pres one of two keys it sounds like i`m pressing more keys sametime.
thnx
I am having a similar issue with my prophet's keypad. It doesn't act reserve like yours but some of the buttons don't function at all. Center key, UP , Right keys aren't functioning. Anyway, i've disassembled the phone 5 times to solve this issue but it just doesn't work. I am sure that my keypad board is %100 functional.
For your problem, i can suggest to dissamble the phone and check if the keypad flex connector is well connected. If that doesn't help, your keypad board might need replacement.
Related
Hi,
my P3600 has a problem - pressing call and hang-up button as well as ok, menu and 2 function buttons on the top keybad do not work.
However, center and direction buttons do work.
This happened before, then worked again, now happening again.
Any ideas anyone? a HW problem or a ROM / hardspl problem? (tried different roms same thing happens)
thanks for your help.
Needs a bump
Just bumping the thread cause I have the exact same problem on my phone. I had it in my camera bag on a hiking-trip this weekend and I think either it was pressed against something or the moist got it. The center buttons still work, but I dont think its on the same connector inside.
My Call and End Call sometimes doesn't work.... with the exception of these 2 buttons, all other buttons on my phone works fine. This is getting more and more annoying as the frequency of these malfunction have been increasing.
I have a feeling there is something wrong with the wire contact because when it malfunction, buttons won't light up (where as when it is working properly pressing the Call/End Call button will make them light up)
Any idea how to fix this?
hi,
some of the hardware keys stopped working on my htc diamond...the only keys that work are. the power button, voluime buttons, up pad down pad and the center/ok button....everything else does not work, even the touch pad doesnt work...can any one please help me, OH and the buttons somtimes work for example when i somtimes press any button on the left side it will go to the home screen, for example when i press call button it will go to the home screen, same with the right side if i press the back button it will press the call end buton wierd eh? So basicly the buttons do respon (the litghts turn on when i press any hard ware button but they do not do anythin 99% of the time and if they do it is the wron function HELP GUYS!
Have you tried restarting the phone? Press and hold the powerbutten (if it works), and answer Yes to the question about shutting down. Take out your battery for 10 seconds, put it back in and fire up your phone... It might help
longice said:
Have you tried restarting the phone? Press and hold the powerbutten (if it works), and answer Yes to the question about shutting down. Take out your battery for 10 seconds, put it back in and fire up your phone... It might help
Click to expand...
Click to collapse
I have the same problem but it is only the home and answer buttons that stop working. If i do the restart it wirks but why should i keep having to do this
jsmith_00 said:
I have the same problem but it is only the home and answer buttons that stop working. If i do the restart it wirks but why should i keep having to do this
Click to expand...
Click to collapse
Hehe, can't answer that. I've had the problem only like twice in three months, so for me it's not a problem... I guess it's a software problem. Remember, it's not a Nokia The inside so much more complicated, so I guess we just have to live with some bugs...
Are you guys sure that this is a hardware related problem? I have the same prob and i was quite sure that i f**ked up the capacitative panel by playing kevtris manickly for quite a long time.
The capacitative screen is comprised by two parts folded.
I have opened the diamond and i found out that there is a lietle piece of metal that binds them together. This was bent(from kevtris probably) so istraightened it out with my bear hands. But it did not fix the problem. Do not try it anyway. Too messy if you have two left hands like me.
Have you ever seen a calibrator for the capacitative screen?
had the same problem only the power button would work , hard reset fixed it.
Have u installed S2U2..try uninstalling it...or install latest version 1.68 of S2U2
Hello guys
I have my volume keys are not working at all
and my hard keys like home send end etc... sometimes work and sometimes not the screen turns on when i push them but its unresponsive :/ what should i do? what i need to buy to repair at my self should i buy
keypad key button flex ribbon cable
or a digitizer?
SnakeBites said:
Hello guys
I have my volume keys are not working at all
and my hard keys like home send end etc... sometimes work and sometimes not the screen turns on when i push them but its unresponsive :/ what should i do? what i need to buy to repair at my self should i buy
keypad key button flex ribbon cable
or a digitizer?
Click to expand...
Click to collapse
The problem is difficult to diagnose from your description alone, there could be various factors involved, from faulty flexes, to digitizer and mainboard connectors.
I suggest if you are asking what you need to repair, you need to talk to a professional. And if you can potentially manage the assembly/disassembly, the volume key membrane is a part of a main flex that connects pretty much everything, it cannot be purchased separately or attached.
hello all im having a problem and wish to get some input on what the problem may be
my hd2 has been ****in up to say the least i installed a new miui rom on it after having touchscreen problems and the weird thing is i can get the touch screen to respond after holding the the green call button and the home button for one second making the flashlight turn on then holding the back and end buttons for one second waiting for the screen to turn off then turn back on
my question is does this have something to do with the kernel or power consumption it seems it might be the case but im no expert
what do you think?
Try to press once or twice the endcall (red) button. There is a common problem with the Leo's digitizer and it is located under the endcall button. So press it hard. It used to help me.
I suggest you to install button savior or any app with softkeys to preserve the physical buttons.
Greetz,
Dodi
damn that definitely helped it along
thanks
the problem still exist but at least i can use the phone
alas i think its time to move on
that sucks i really liked my phone
Not responding touch screen
Is the keypad fully connected with the touchscreen? Because my keypad flex cabel is broken, and my digitizer doesn't respond. Do i need to buy a new digitezer or just flex cabel? Can somebody help me? Thanks
i haven't checked the good thing is i have a spare digitizer but its a hassle still ill probably end up trying eventually