My Call and End Call sometimes doesn't work.... with the exception of these 2 buttons, all other buttons on my phone works fine. This is getting more and more annoying as the frequency of these malfunction have been increasing.
I have a feeling there is something wrong with the wire contact because when it malfunction, buttons won't light up (where as when it is working properly pressing the Call/End Call button will make them light up)
Any idea how to fix this?
Related
I have an issue that has gotten to be rather annoying with my Wizard. When I'm no a call, My case sometimes presses the center button on the D-Pad, and results in my call being put on hold. I thought that setting the device to turn off after one minute would eliminate the problem (my device is set to only power on using the power button when in standby. The problem is that this rule has an exception during a call. The call answer button is still active, and when the case presses it, I get my call put on hold again. There is also warning sound of any kind when the call is put on hold. Is there a way to deactivate the call answer button when on a call to avoid this issue?
hi
almost every call i make, it hapend to be on hold in the middle of the call, i found out, that this hapens, when i speak thru my bt headset, and the device stays, in side the case, so even the screen is dark, the send key is pressed suddenly.
i need a solution how to lock this key during a call.
thanks.
up up up up
can someone explain me why when i pres down key it acts lik i`m pressing left key and when i press left sometimes goes down and sometimes goes left?is any solution.is keypad damaged?and when i pres one of two keys it sounds like i`m pressing more keys sametime.
thnx
I am having a similar issue with my prophet's keypad. It doesn't act reserve like yours but some of the buttons don't function at all. Center key, UP , Right keys aren't functioning. Anyway, i've disassembled the phone 5 times to solve this issue but it just doesn't work. I am sure that my keypad board is %100 functional.
For your problem, i can suggest to dissamble the phone and check if the keypad flex connector is well connected. If that doesn't help, your keypad board might need replacement.
ever since i got my hd2, i've got this really annoying problem: when i make a phone call and hold the phone at my ear, it's supposed to shut off and lock the screen using the approximity sensor. but often, this wont work right, the sensor keeps enabling/disabling the screen, causing me to unwillingly press this football-field-sized "end call" button or to activate the phone pad and pressing those buttons.
this problem seems to occur more often when holding the phone at my right ear then at my left.
anyone know a solution? (maybe keeping the screen shut off during the whole call until pressing the windows button or something?)
I noticed this the other day, but figured it was just a fluke thing......I've now made about 10 calls on my OnePlus 2 and when I'm finished with my call, I don't have a hang-up button! I have to hit the home button, then swipe down and choose "Hang Up" from the little window there. Doing this is a quite a chore because the sensors detect when the phone is by your face and shuts off the screen, so when I try to touch my screen it will shut off the screen. I eventually get it, but it sometimes takes about 30-45 seconds to end my call doing it this way.
Am I missing something? Is one of the softkeys (on the phone) now the hang up button?
u have to press the dialer keys button and it will minimize and reveal the round, red end call button. yes, kind of strange. but u can also set your power button to be an end call button i believe.
kramer987 said:
u have to press the dialer keys button and it will minimize and reveal the round, red end call button. yes, kind of strange. but u can also set your power button to be an end call button i believe.
Click to expand...
Click to collapse
Thanks!
But, something weird just happened.... I lost my "clear all recent's" and read if you boot into safe mode, that will fix it..... So I booted into safe mode and it fixed my missing "clear all" X......But it also seemed to have changed the behavior of my dialer??!!?! Now, I have the red hang-up button that shows all the time (like it should).
So it just sounds like it's a little buggy still?