hi,
some of the hardware keys stopped working on my htc diamond...the only keys that work are. the power button, voluime buttons, up pad down pad and the center/ok button....everything else does not work, even the touch pad doesnt work...can any one please help me, OH and the buttons somtimes work for example when i somtimes press any button on the left side it will go to the home screen, for example when i press call button it will go to the home screen, same with the right side if i press the back button it will press the call end buton wierd eh? So basicly the buttons do respon (the litghts turn on when i press any hard ware button but they do not do anythin 99% of the time and if they do it is the wron function HELP GUYS!
Have you tried restarting the phone? Press and hold the powerbutten (if it works), and answer Yes to the question about shutting down. Take out your battery for 10 seconds, put it back in and fire up your phone... It might help
longice said:
Have you tried restarting the phone? Press and hold the powerbutten (if it works), and answer Yes to the question about shutting down. Take out your battery for 10 seconds, put it back in and fire up your phone... It might help
Click to expand...
Click to collapse
I have the same problem but it is only the home and answer buttons that stop working. If i do the restart it wirks but why should i keep having to do this
jsmith_00 said:
I have the same problem but it is only the home and answer buttons that stop working. If i do the restart it wirks but why should i keep having to do this
Click to expand...
Click to collapse
Hehe, can't answer that. I've had the problem only like twice in three months, so for me it's not a problem... I guess it's a software problem. Remember, it's not a Nokia The inside so much more complicated, so I guess we just have to live with some bugs...
Are you guys sure that this is a hardware related problem? I have the same prob and i was quite sure that i f**ked up the capacitative panel by playing kevtris manickly for quite a long time.
The capacitative screen is comprised by two parts folded.
I have opened the diamond and i found out that there is a lietle piece of metal that binds them together. This was bent(from kevtris probably) so istraightened it out with my bear hands. But it did not fix the problem. Do not try it anyway. Too messy if you have two left hands like me.
Have you ever seen a calibrator for the capacitative screen?
had the same problem only the power button would work , hard reset fixed it.
Have u installed S2U2..try uninstalling it...or install latest version 1.68 of S2U2
Related
Hi All
My power button on my phone is stuck down, It not longer sticks out. I can still get it to work if i push it down with the stylus.
I stuck a pin down each side of the button to ensure the button was not wedged under any part of the case but this has not resolved the issue.
Im not sure what to do and it is starting to become annoying.
Has this happened to anyone else and if so, how did they fix it?
Thanks
Fixed
My button is fixed. No idea how. I just pulled it out of my pocket and went to press the button and it was back to its old self again.
So if anyone has a broken button in the future, just give it a day or two and it will probably fix itself
Thanks All
lashko said:
My button is fixed. No idea how. I just pulled it out of my pocket and went to press the button and it was back to its old self again.
So if anyone has a broken button in the future, just give it a day or two and it will probably fix itself
Thanks All
Click to expand...
Click to collapse
You are exactly lucky.....the power button on my device has not been working for more than half of a year and I have to use a programs to soft rest or hard rest my device. The only problem is that I can't flash the rom without the power button if I'd like to.....
Hi All, I have owned a lot of HTC phones and now I have the HD, its the first time I see HTC phone with such small, thin, and hard to press power button !!
especially in the dark, I cant press it and wake up my phone easily !!
I MANAGED TO TWEAK MY HD and now I wake up my device pressing the volume button, but again I have new problem : sometimes when I carry my phone the volume get pressed by mistake and the ringer get muted or low and I miss some calls !!!
Any solution for this problem so I can wake up my phone from the standby without pressing the microscopic power button !!
Take out the stylus and insert it back again. That wakes up the device. Otherwise you might want to search for a G-sensor enabled "wake-up" application. "Shake_it_to_wake" so to speak...
ahmadddd said:
Hi All, I have owned a lot of HTC phones and now I have the HD, its the first time I see HTC phone with such small, thin, and hard to press power button !!
especially in the dark, I cant press it and wake up my phone easily !!
I MANAGED TO TWEAK MY HD and now I wake up my device pressing the volume button, but again I have new problem : sometimes when I carry my phone the volume get pressed by mistake and the ringer get muted or low and I miss some calls !!!
Any solution for this problem so I can wake up my phone from the standby without pressing the microscopic power button !!
Click to expand...
Click to collapse
Hello
Use S2u2
facet_ said:
Hello
Use S2u2
Click to expand...
Click to collapse
How can you use it to wake up the device? I don't see that option in the description, except the default stylus in and out...
...
I guess S2U won´t help you with waking up your device but if you use volume buttons it will protect you from accidental muting your phone.
I found power hard to press, too, but then I looked closely: This power 'button' is indeed non-symmetrical - at least on *my* device: it stands up a bit on one side, the left side, which is closer to the middle of the HD. So I press it *there*, because obviously enough that's the place where the sensor is located. It works easy every time.
ducatisto said:
I found power hard to press, too, but then I looked closely: This power 'button' is indeed non-symmetrical - at least on *my* device: it stands up a bit on one side, the left side, which is closer to the middle of the HD. So I press it *there*, because obviously enough that's the place where the sensor is located. It works easy every time.
Click to expand...
Click to collapse
Thats a brilliant tip. Thank you.
david-v said:
How can you use it to wake up the device? I don't see that option in the description, except the default stylus in and out...
Click to expand...
Click to collapse
Hello , use keylock.exe and set unlocking any key + s2u2,
ahmadddd said:
I MANAGED TO TWEAK MY HD and now I wake up my device pressing the volume button,
Click to expand...
Click to collapse
Can you tell me how?
Ducasito. Good observation. I wondered why sometime it was easy and sometimes hard. So the slight non-symmetrical button is not a manufacturing fault but a very subtle design feature. Now I know which side to hit. Thanks
Seems all HD's are different OR I have a very heavy finger.
All I need to do to get it to wake it lightly touch the power button and it comes on.
JanSchotsmans said:
Seems all HD's are different OR I have a very heavy finger.
All I need to do to get it to wake it lightly touch the power button and it comes on.
Click to expand...
Click to collapse
I suppose it is just a matter of "where" you push the button. Just push it on the left edge (where the small led is placed) and you will not need that much pressure to switch the device on or off. The button sensor is actually under that left edge. the picture shows the powerbutton part (picture taken from the HTC Touch HD service manual). Under the left edge of it is the sensor, so putting the pressure there is the best way of pressing the button
ahmadddd wrote:
"I MANAGED TO TWEAK MY HD and now I wake up my device pressing the volume button"
my question is: how did you manage it? with a special registry key?
....since a few months I`m searching for a solution....please help me
(my fingers are too big for the Power button)
many thanks, Michael
TFH said:
ahmadddd wrote:
"I MANAGED TO TWEAK MY HD and now I wake up my device pressing the volume button"
my question is: how did you manage it? with a special registry key?
....since a few months I`m searching for a solution....please help me
(my fingers are too big for the Power button)
many thanks, Michael
Click to expand...
Click to collapse
You can use AE button plus. I use this to convert my volum buttons to up and down buttons on single click, select/ok on double click, and volume on hold and press.
Thanks for your answer but I´ve a further question:
Do you "wake up" (from standby) the blackstone by using this AE button? I tried to use this software but I couldn`t wake up the Touch HD from standby by using the volume buttons.
The device and the touchscreen work, but none of the capacitive buttons (menu, home, back, search) are responding, even after reboot and even after a hard reset. Not even in recovery mode. Any suggestions ?
Hey Bud, Mine has about a bit similar issue but not quite exactly the same as yours because my button sometimes works and most of the time responds like really slow or like not at all - of which i have to tap on it twice or multiple times to make it work. the worst button takes a lot of time or less to respond was my capacitive back button, the rest works fine but not always. i suspect that it may have something to do with the internal hardware... anyone here please shed some miraculous light here...
Not sure how to fix your issue, but in the meantime you can jump on the Android Market site on your PC, install Button Saviour then launch it as a replacement for your capacitive buttons. That should cover your needs.
Hope that helps!
agc93 said:
Not sure how to fix your issue, but in the meantime you can jump on the Android Market site on your PC, install Button Saviour then launch it as a replacement for your capacitive buttons. That should cover your needs.
Hope that helps!
Click to expand...
Click to collapse
Thanks a million!
Still looking into the cause of the problem...
hello all im having a problem and wish to get some input on what the problem may be
my hd2 has been ****in up to say the least i installed a new miui rom on it after having touchscreen problems and the weird thing is i can get the touch screen to respond after holding the the green call button and the home button for one second making the flashlight turn on then holding the back and end buttons for one second waiting for the screen to turn off then turn back on
my question is does this have something to do with the kernel or power consumption it seems it might be the case but im no expert
what do you think?
Try to press once or twice the endcall (red) button. There is a common problem with the Leo's digitizer and it is located under the endcall button. So press it hard. It used to help me.
I suggest you to install button savior or any app with softkeys to preserve the physical buttons.
Greetz,
Dodi
damn that definitely helped it along
thanks
the problem still exist but at least i can use the phone
alas i think its time to move on
that sucks i really liked my phone
Not responding touch screen
Is the keypad fully connected with the touchscreen? Because my keypad flex cabel is broken, and my digitizer doesn't respond. Do i need to buy a new digitezer or just flex cabel? Can somebody help me? Thanks
i haven't checked the good thing is i have a spare digitizer but its a hassle still ill probably end up trying eventually
since yesterday, i have this nasty problem with my touchscreen. when i press the power button to wake the phone, or to get into the power-menu, the touchscreen stops working. this does no happen if i press any other button.
sometimes, i can use the phone again if i wait until the screen turns off and then wake it up by pressing any other button, but most of the time i need to pull out the battery and restart the phone. even when i pull out the battery, the screen won't work sometimes, and i have to restart the phone again.
when i first experienced this problem, i was using the nexushd2 v2.0 rom, i then updated to the v2.1, which didn't help. i tried reinstalling the rom, wiping the /data/ , the cache and the dalvik cache (multiple times) and eventually changed to the typhoon cm7 rom (with repartitioning and reinstalling the magldr), the problem is still there.
the phone did never get wet, fall down, or anything the like. pulling out the sd card makes no difference.
i hope someone can help me there
May be it´s a hardware problem, some HD2 have it.
You can test it, if you go back to windows.
its the good old digitizer its right under the power button press the end button hard and it should work again but if you press it again it will corrupt use softkey or remap your hardware buttons
http://forum.xda-developers.com/search.php?searchid=22866591
Kameirus said:
http://forum.xda-developers.com/search.php?searchid=22866591
Click to expand...
Click to collapse
Lol, I was about to do that
@OP, in future please use the search button before posting. There are far too many threads in this forum with exactly the same issue as Kamerius has just proved, so why couldn't you save both us and yourself some time and search first? Anyway, what you have is a digitizer issue, but a quick temporary solution is to simply press as hard as you physically can on the end call/power button. The screen should work after that. Use a button remapper or some sort of widget to enable you to use the phone without ever touching the end call button, and make sure to use other buttons to wake the screen.
Nigeldg said:
Lol, I was about to do that
@OP, in future please use the search button before posting. There are far too many threads in this forum with exactly the same issue as Kamerius has just proved, so why couldn't you save both us and yourself some time and search first? Anyway, what you have is a digitizer issue, but a quick temporary solution is to simply press as hard as you physically can on the end call/power button. The screen should work after that. Use a button remapper or some sort of widget to enable you to use the phone without ever touching the end call button, and make sure to use other buttons to wake the screen.
Click to expand...
Click to collapse
lol
i have the same problem with the endkey but with the rom in my sig
it actually has a softkey button that can be setup with a power softkey ..longpress on the softkey and it pulls up the power menu
just like it would do if you used the hardware power button
Yeah I thought there were softkey power buttons but I wasn't sure and I'm on my phone so couldn't be arsed to search
Sent from my HTC HD2 using XDA
Kameirus said:
link that doesn't work anymore
Click to expand...
Click to collapse
Nigeldg said:
many words
Click to expand...
Click to collapse
well, sorry dunno why i didn't search the forum before
pressing the power button hard worked , but i think i'll keep using soft buttons and wake the device pressing any other button (i don't think the brute force method is a good idea as i want to keep my phone some time longer )
Touch Screen Problem in HTC HD2
Thanks for your reply
Well i had HTC HD2 and i had install Android 4.0.3 and it was working fine from last 1 month but today suddenly it stop working touch screen and after 1 hour it started again but i wont able to touch every where it randomly working
So after then i read you reply and i try it i had press Hard Power button and then its started working fine and its work for 1 hour and then again stop so i again press hard power button and its started and also iam not using power button for any use
so you can let me know what is the permanent solution for this do i need to change touch screen completely it is damaged
pls let me know i will very thank full to you because 8 month back i already replace touch screen once and today again same problem
thanks
nrvjain said:
Thanks for your reply
Well i had HTC HD2 and i had install Android 4.0.3 and it was working fine from last 1 month but today suddenly it stop working touch screen and after 1 hour it started again but i wont able to touch every where it randomly working
So after then i read you reply and i try it i had press Hard Power button and then its started working fine and its work for 1 hour and then again stop so i again press hard power button and its started and also iam not using power button for any use
so you can let me know what is the permanent solution for this do i need to change touch screen completely it is damaged
pls let me know i will very thank full to you because 8 month back i already replace touch screen once and today again same problem
thanks
Click to expand...
Click to collapse
I am facing the same issue except no matter how hard I press the red button....LCD doesn't works. I have even replaced the thin metal strip which rests under hardware buttons.
Anyone?
Exactly, the same issue started to happen yesterday!!!
mwuahjaan said:
I am facing the same issue except no matter how hard I press the red button....LCD doesn't works. I have even replaced the thin metal strip which rests under hardware buttons.
Anyone?
Click to expand...
Click to collapse
I tried changing the metal strip too. But it still the same. Doesn't work.
Sent from my GT-N7100 using Tapatalk 2