Gsensor adjustment on hero. Help! - Hero, G2 Touch General

Hi all, I'm a newbie of this 4rum. Recently i got a bit problem with my hero, it sometime disappears the Gsensor function, I think so. Due to it's automatically unable to change horizontal interface in sms, web browser, picture performance. Although I've tried to adjust Gsensor calibration, nothing went on at all. After that, I did reset factory, it returned initially. everything was ok. however, it just meet again now . So kindly let me know the most effective solution. thanks in advance

Related

Touchscreen occasionally stops working

Hi,
i have an intermittant problem that is getting more and more annoying...
The touchscreen stops working in normal mode (i.e. keyboard not out) but still works when I slide the keyboard out. If I slide the keyboard back in, the touchscreen stops working again!
Has anyone come across this? Is there a microswitch somewhere that isn't being turned on or off or something relative to the keyboard position?
Any help appreciated,
Cheers,
Liamo
yes I'm having the same problem over here and I'm in the middle of a buiness trip. earlier it got so bad I had to hard reset my phone because soft resetting the phone to fix the problem stopped working. so I lost every number I had in the middle of an important trip, costing me money. I'm so pissed. I did nothing special. I have molski's aku 3.2 rom with my own tmobile mms/gprs settings extended rom installed. I had it overclocked to 240 (i thought that was the problem). I had magic button, battery status plugin, aim hacked, mxcalculator, win live messenger, yahoo go!, a couple of basic registry hacks, all installed. let me know if you had anything in common so we can narrow down this problem. this has never happened before even with overclocking so I'm very worried.
I'm having the opposite problem. When I start to slide mine open it stops working.
yea im having the exact problem, i tried opening the phone up and checking all the connections, but no luck.

My Wizard has multiple bugs, need help solving

I understand that this forum is filled with developers. So I am hoping for some informed help. If you have any of these same problems please respond as well. I would like to know if these are isolated to my setup
I migrated from a cel phone and a PPC running WM2003/2003se. Mainly for the converged device, but also for the persistent storage. I run a small business, and and am very busy and rely on my phone and schedule all day everyday.
I have only had the wizard (MDA) for about 3 weeks and experienced odd problems since the first weekhttp://forum.xda-developers.com/images/smilies/eek.gif
. Unfortunately I did not buy new, so I am not sure if any of these are covered by warranty or not... I am just going to list the problems:
1) If I leave my phone plugged in at night to charge than by the time I wake up the phone will not come out of standby. I have to press the soft reset button to get the unit to work again. This happens intermittently
2) I use an alarm program so that the unit acts like an alarm clock. If the phone is plugged in at night, and does not experience problem number 1, than the alarm just won't go off. I turn on the phone and the alarm program is open, but it did nothing. If the phone is not plugged in than the alarm works fine.
3) Soft buttons. I have the registry set to remap what the soft buttons do. I use Agenda Fusion (Latest Version) so i have them set to open the calendar and the contacts to Agenda Fusions view of them. This works most of the time. On occasion the soft buttons just stop working except for running through the menus for reminders.....
4)The other day i went to take a photo, the camera said that it could not proceed because there was not enough memory. At the time I had 30 megs of storage free, about 12 megs of program free and about 900 meg left on my sd card...
5) Every so often the unit won't launch a program, it says that the exe is unsigned or not trusted. It works every other time though.
6) I use cLaunch. Every so often cLaunch disappears from the today screen. The only wat to get it to reappear is to remove it from the today screen from the today items menu, wait a couple of seconds and then return it to the today screen.
7) Every so often the unit stops recognizing the sd card..have to remove and re-insert
8) I use reminders for all my calender and to do items. Occasionally the reminder will go off for a certain item 24 hours in advance, even though the setting is correct in the item...
I feel like I am missing a few problems. But you get might point, WM5 is weird. All of the above can be corrected with a soft reset. But sometimes the problems show up multiple times a day. Causing me to have to soft reset in the most inconvenient times, several times a day.http://forum.xda-developers.com/images/smilies/mad.gif
I did not have these problems under WM2003. I have a friend who uses a Verzion phone that is similar to the wizard (made by a different company though, not HTC...it has an external antennae and that is where the stylus is stored as well) She and I were comparing phones today. Hers runs WM5 but she said that she has never experienced any of these problems in the 1 year that she has owned hers...
Is this an HTC Wizard problem? A WM5 problem with the wizards? Would it help if i installed on of the alternate roms that I read about here on XDA developers? I am considering a hard reset and starting from scratch but I don't want to go that route unless it is the only way. And if I do, I may just use one of those roms.....What does everybody think?http://forum.xda-developers.com/images/smilies/confused.gif
Sorry for the long winded post....
Seems like a software problem based on (1) and (2). Is the ROM an official ROM?
Re:
Hello Hanmin Thanks for responding,
Re Number 1. I just saw that some one else posted with that problem. So I will see if they have they same alarm program installed. I have wondered if everything is software related. Thats why I am hoping to see if others are having these types of problems, and if so, what programs they are using...
Re the rom...yes it the official T-mobile release, version listed in my sig.
Thanks again
New problem
I have just encountered a new problem:
While picking up my voice mail the system would not register my button pushes. Weather on screen or the hardware buttons. I could not interact with voice mail, nor could I end the call with the hardware button or the soft button....I had to reset the phone to end the call!!
How frustrating is that
Have you tried reflashing the original ROM? Being a used phone that would be the first thing I would do. It's going to wipe out all your data and return it to an "out of box" state, so i suggest backing up anything important and sync to your PC. If that doesn't work then you have a hardware issue but I'm willing to bet that should take care of it. You can find the original ROM on HTP's website. Good Luck
Thank you
Thanks for that suggestion....I am hoping to not go down that road, if I can help it. But I will do it if there are no other options. So If I may ask: How many votes does re flashing old Rom Get? And are there any other ideas?
Again Thanks. I am going to download the rom in case it does come to that....
wait...the phone dosen't wake up unless you push the small button on the top of the phone? That is not the default setting on the MDA, however it's acting naturally. Our phones go on a standby to save power. Click the battery icon in the lower right hand corner-->Click the Advanced tab--> uncheck Turn off device on external power
Misunderstanding....
When the phone is plugged in over night and reaches %100 charge some times it won't "Wake Up" even hitting the power button on top. The only thing that will turn it on is the "Soft Reset" button on the right side, beneath the IR sensor.
bump
no text
No text
Just bumping
It sounds like you have software problems - possible a corrupt notification queue - personally i would do a hard reset of the device - probably in the process of this i would soft reset before the t-mobile extras install - taking details of gprs, mms settings before this.
I would run the phone without installing software to see that its not a hardware problem. Then reinstall programs one by one and see how it goes. Some software like claunch is not made for wm5 so expect some glitches (i use claunch and get occ glitch)
If you dont want to hard reset check the notification queue for duplicates and rogue scripts using check notifications - attached - install via pc. Dont delete notifications important for system running - common duplicates are clock\calendar.
alarm problems
Hi,
frankly i had similar issues - less critical but annoying: alarm clock not waking me up, slow system, notification queue mess, difficult resets, camera issues, bluetooth a2dp skipping. I upgraded my Qtek multiple times, and finally i can say that 2.26 roms (i use molski's) are exceptionally stable and reliable. The problem is not Wm5, the problem is how buggy many released versions are. So, my suggestion: look to the forum, find roms that appear to have a reliable history, cross your fingers and...upgrade. Then, resist in upgrading to any rom that just came out and appear to be faster, cooler, nicer. Unless you have an issue to be solved, and you see 100 messages confirming that the rom is stable and does the job...
Thank you meschle and pzucchel for the thorough answers. I am going to try the notification queue first.
@ Meschle: where do I find the gprs, & mms settings? And should I just copy them down by hand? Then after re-starting w/out tmobile crap, do I just put these settings in the same place as where I found them?
@ Pzucchel: Do you believe that Molski's 2.26 is more stable than the Tmobile factory installed 2.26?
Thanks again
cameraddict said:
Thank you meschle and pzucchel for the thorough answers. I am going to try the notification queue first.
@ Meschle: where do I find the gprs, & mms settings? And should I just copy them down by hand? Then after re-starting w/out tmobile crap, do I just put these settings in the same place as where I found them?
@ Pzucchel: Do you believe that Molski's 2.26 is more stable than the Tmobile factory installed 2.26?
Thanks again
Click to expand...
Click to collapse
Write them down manually its the safest way - there are cabs available but often dont work.
GPRS - settings\connections\connections\manage existing connectons - settings should be here prob named t-mobile
MMS - go into messages\menu\options\MMS\servers click on prob t mobile again.
Thanks again!

Issue with Auto-Rotate

I have encountered an unusual issue (bug?) on the HD and wondered if anyone else had seen the problem (and found a solution!)
First the issue:
When I rotate the device to landscape, applications initially rotate properly. However, after a few seconds the phone dialer screen appears (in landscape mode). It blinks once or twice (like the screen is redrawing) and stays there for perhaps five seconds before switiching back to the original app. However, even though the device is still held i landscape, the application is now in portrait mode too and the only way to get it back to landscape is to rotate the device back to portrait then to landscape again...at which point the whole cycle repeats.
Things I have tried to clear the problem:
So far, all I have tried is a soft reset, which I thought had cleared the problem at first. Sadly, however, it's back.
Repeatability and conditions:
I've only done one soft reset so far as I wanted to investigate a bit further first
It initially happened in Opera with GSen off (it is installed though)
It happens whether or not GSen is active
It happens in all applications, not just Opera (obviously GSen is active when it happens in other applications)
I don't have a HD (yet) but i've read somewhere that GSEN is not working correctly on the HD. There is suppused to be a tool called "Gyrator2" which does the same but is more stable on the HD.
regards jan
hausen said:
I don't have a HD (yet) but i've read somewhere that GSEN is not working correctly on the HD. There is suppused to be a tool called "Gyrator2" which does the same but is more stable on the HD.
regards jan
Click to expand...
Click to collapse
May be an option, but I haven't had any problems with GSen and I seem to get the issue whether or not GSen is active. I have even had it in an instance where GSen had not been activated since the previous reboot.
Thanks for the thought though, I'll investigate...
please don't use GSen since it's heavily bugged atm for the HD.. Gyrator2 is an option even though consumes a lot of cpu power (device become slow whenever Gyrator2 rotates the screen)
iain.fraser said:
I have encountered an unusual issue (bug?) on the HD and wondered if anyone else had seen the problem (and found a solution!)
First the issue:
When I rotate the device to landscape, applications initially rotate properly. However, after a few seconds the phone dialer screen appears (in landscape mode). It blinks once or twice (like the screen is redrawing) and stays there for perhaps five seconds before switiching back to the original app. However, even though the device is still held i landscape, the application is now in portrait mode too and the only way to get it back to landscape is to rotate the device back to portrait then to landscape again...at which point the whole cycle repeats.
Things I have tried to clear the problem:
So far, all I have tried is a soft reset, which I thought had cleared the problem at first. Sadly, however, it's back.
Repeatability and conditions:
I've only done one soft reset so far as I wanted to investigate a bit further first
It initially happened in Opera with GSen off (it is installed though)
It happens whether or not GSen is active
It happens in all applications, not just Opera (obviously GSen is active when it happens in other applications)
Click to expand...
Click to collapse
Will the problem go away if you uninstall GSEN? I mean, not just making it inactive, but to completely remove it.
eaglesteve said:
Will the problem go away if you uninstall GSEN? I mean, not just making it inactive, but to completely remove it.
Click to expand...
Click to collapse
Annoyingly enough (in one way) I've not had the issue since I soft reset a few hours ago. I'm keeping a close eye to see if i can trap what I have been doing just before the issue recurs.
I have suspicions about PCM Contacts but have no good reason to, other than the fact the problem started at roughtly the same time as I installed the latest version.
Next step is to try removing GSen, as you suggest, but I want the issue to recur first to see if I can make some sense of what's happening...
The problem isn't with Gsen.
This happened to me while browsing, it just kept flicking back to portrait and then coming out of Opera.
As a result I thought I'd install Gsen and everything worked perfectly for about an hour. I left the phone (locked) for a while to attend to a few other things and then it started again.
Now I've not had the phone long 10 days or so but I have installed a lot of cabs and applications. At first I thought it might be a bug on the HD but unfortunately it could be anything.
What I will say is that I didn't have this problem before I added new tab icons (manilla), installed Schaps AC or changed the calc skin. Gsen was next on my list.
A soft reset seemed to work for me.
Hope this helps.
Mav.
Switching the phone on and off seems to clear the problem for a while. Anyone solved this?
My solution
Just wanted to say that i had this exact problem.
Fugured it had to be a problem with som custom stuff i had installed, and so it was.
Started uninstalling backwards from the last installed thing, and found that the problem was caoused by a custom status icon cab I installed.
Named Colored Top Bar WWE ST.cab
If you have something similar, this could be the problem.
(BTW, I'm not bashing the author of this file at all. Everyone should know that installling custom stuff is your own responsibility)
Mavrick said:
The problem isn't with Gsen.
This happened to me while browsing, it just kept flicking back to portrait and then coming out of Opera.
As a result I thought I'd install Gsen and everything worked perfectly for about an hour. I left the phone (locked) for a while to attend to a few other things and then it started again.
Now I've not had the phone long 10 days or so but I have installed a lot of cabs and applications. At first I thought it might be a bug on the HD but unfortunately it could be anything.
What I will say is that I didn't have this problem before I added new tab icons (manilla), installed Schaps AC or changed the calc skin. Gsen was next on my list.
A soft reset seemed to work for me.
Hope this helps.
Mav.
Click to expand...
Click to collapse
i cannot conclusively say if it's a problem with GSEN or not. but i had the exact same problem with GSEN installed, but not activated. i couldn't solve the problem so i did a hard reset (i didn't bother uninstalling gsen and try it again). i don't have problems anymore, but i do have all my old applications installed, except for GSEN. i currently do not have gyrator or any other screen rotating app installed. i don't have a need for them at the moment. so i don't conclude anything, you can deduce from here.
Bascha said:
J
Fugured it had to be a problem with som custom stuff i had installed, and so it was.
Started uninstalling backwards from the last installed thing, and found that the problem was caoused by a custom status icon cab I installed.
Named Colored Top Bar WWE ST.cab
Click to expand...
Click to collapse
I have the same Top Bar and don't have the issue you guys have been describing.
my problem is kinda similar but a little different, my opera works fine w/ landscape and portrait, but when I try to access My Faviorite in landscape mode, it would only display in portrait even though I was holding it landscape and the second half of the screen was still the page content. it's weird and I still didn't got time to do a hard reset first, any one experience this?
I have this issue (damnit), and I am using those color-top-bar-icons. However, I have never been using GSen, I am using gyrator 2. Can anybody confirm that it is top-bar-icons that's causing the problem?
I have the issue and I don't have the top bar colored icons installed.
I do have Gyrator 2 but the problem still occurs when Gyrator 2 is not running.
I don't know why it occurs and it goes away by itself...seems sporadic.
I got Gyrator2 on mine too, but I don't see people in Gyrator thread complaining about this happening...um...do I really need a hard reset for this?
(by the way, I disable all rotation and only enable the programs I used, of course Opera is disabled)
update from mine, I just did a hard reset the the landscape favorite in Opera still got messed up, so I restored my device and gave up. gotta wait for new official ROM maybe...

HD2 Auto soft reset

Hi guys,
i wondering if anyone of u had this problem.
I always encounter auto reset whenever i use some program.
Like for example
I was watching Youtube, watch half way it will just auto reset itself. sometime it will auto reset a few time b4 it becomes stable. there was once i on google map, same thing happen to me, auto reset. the latest was that i was on MSN, and listening to music at the same time, leo seem not able to take it. just auto reset on me again.
Seriously it is getting frustrating... wondering if anyone out here got solution to it? i realized my phone seem to be quite warm during charging. apparently there a time where i was on charging mode, i on msn and surf net, it just auto reset on me again! Also sometime when i use some app it seem warm to my HD2 also. dont know it is just me or im thinking too much.
I suggest you hard reset your phone and don't install any third party software, see if it resets again.
If it works, start installing third party software one at a time to see which software is conflicting.
you know what. just now my fren called. i was on charging mode, the moment i pick up, it auto reset!
I'm having the same problem and a hard reset didn't help. Any solutions would be welcomed.
Mike
I had the same problem with my Kaiser. Turned out the culprit was cheap chinese replacement battery I installed. For some reason the power could be interruped for a moment causing soft reset. This was never happening when the phone was just lying on a table, but every time this happned I was doing someing with the phone. When I installed the OEM battery, this problem disappeared.
but it can't be my batt, cos im using the orginal batt provided by HTC. *sigh*
I'm same problem, hard reset or install new rom is not help (I'm do all think about OS. and software) check in xda forum
h_t_t_p://forum.xda-developers.com/showthread.php?t=716288
some of problem fix by send HD2 back to HTC. they are replace mainboard and problem gone.
For me can not send HD2 back to HTC. because I'm in Thailand but by HD2 from SIS. Hongkong.
Hope some one can help us to fix this problem.

G-Sensor and call problems

Well first of all I love Android, but I have some problems. The first problem I have is the G-Sensor, it used to work, but suddenly it stopped working properly. Now when I want to rotate the screen I have to hold it the way I want it to turn for 20 seconds, is there a solution to this problem?
Now my second and most important problem is calling. I have multiple problems with it. One of them is when I'm being called while the phone is in lockscreen I try answering it but I have to wait ten seconds before it actually answers, mostly the caller is already connected to my voicemail. My second problem is the End Call button when is press it, it says ended but I also have to wait ten seconds before it actually ends the call. Does anyone have the solution to these problems?
For further information, I use Froyostone 3.2. And sorry for my poor English.
Could anyone please help me, sorry for the bump?
Also I notice that my hardware buttons light up randomly.
I also have the same problem. Well at least with the g sensor. Running android 2.2 the problem with my g senor is whenever I flip messages they will not flip back. (along with anything else that does flip) I've done the re-calibration on the phone and this is what happens.. x axis is fine y axis either stays all the way up or goes all the way down. When I start the calibration the y and x axis both go to the middle but after when calibration is done the y axis goes right back up or right back down.
Thanks in advance if any one can help.
The same thing happens to me when I'm trying to calibrate it. Also have you tried holding your device for 10-20 seconds the way you want to turn it? This solves the problem for me, but I would like it to happen a little faster.
I calibrated the G-sensor when I first put on Android, bad mistake, the Bubble just stayed at the top and nothing rotated properly. The Sensor worked fine in WinMo so I guessed I'd screwed it up.
Since read somewhere on here that you shouldn't Calibrate it in Android.
Had to reinstall Android fresh to get it to work again, but its been working fine since.
Was on froyostone 3.1, when I reinstated upgraded to 3.2, all is great
Sent from my HTC HD2 using XDA App
Okay that could be the solution. Do you also know if I need to put a new data image on it. I would like to keep my old one, but I thinks the problem lies there or doesn't it?
You might be able to calibrate your G-sensor in Android. Click the calibrate button and place your phone screen down on a flat surface. For some reason, calibrating only seems to be working when you face your phone screen down. It did the trick for me, fixed the offset and it's working just fine now.
Daan0 said:
Okay that could be the solution. Do you also know if I need to put a new data image on it. I would like to keep my old one, but I thinks the problem lies there or doesn't it?
Click to expand...
Click to collapse
I tried changing the data image from 3.1 to 3.2 but the g-sensor was the same, i just used Titanium Pro to backup the data i wanted to keep and reinstalled.
Try the Phone on its screen re-calibrate as suggested, ive read that may work as Roeltjuh suggested, but that was after i had reinstalled
That seem to do the trick, thank you!
Does anyone have the solution to my other problems? Also I've noticed a new problem, sometimes my WiFi won't turn on till I reboot. In the settings menu it says shutting down WiFi. But its already been shut down, and because of the loading it takes to shut down wifi, I can't turn it back on and my data connection says that it will be turned on when my WiFi is shut down. So I always have to reboot.
Sorry for all the questions, but I believe some of them can be fixed and they're too annoying to ignore. And again sorry for my poor English.

Categories

Resources