I have an issue where I can easily setup and use Internet Sharing via bluetooth between my wing and a tablet pc when using the factory 6.1 rom.
But no matter how I try it, I just can't get any of the cooked roms to connect.
Trying cooked roms and installing the Internet Sharing cab - fails to connect.
Trying cooked roms with internet sharing preinstalled - fails to connect.
Trying the latest 6.5.1~6.5.3 roms have been connecting but local only (no internet on the tablet).
Has anyone else encountered this? and what solution did you come up with? Are you harvesting .dll files or registry keys from the factory 6.1 rom?
Any help or ideas appreciated.
can't believe no-one else is having any issues.
Im lost..
Which is the latest ?
I would guess that I am missing a step in the setup on the cooked roms that is pre-configured on the factory rom.
I just don't know what it is that I'm failing to configure.
Related
i have failed miserably in the attempt to get wifi working properly on my 8125 with the new IMATE rom flashed.
i downloaded the original cinular rom from the ftp and am going to flash it back. I notice 2 files on the ftp, a zip and an rar, i assume they are both the same .nba file because of size?
I am going to use aWizard to flash it back. I am not sure how the splash image portion should be done, and i want to make sure i do everything right.
Anyone done this yet?
Once i do it i will post my results on the 3 routers i have curently, and my success at logging into them with the wizard with the SAME settings ive been trying with the imate rom.
Anxious for any responses. thanks.
Dan
good luck. I have been using the 2.16.9.1 WWE rom on my cingular 8125 since the day the imate rom was noticed on clubimate's site. I have connected to 2 different access points (Netgear WG302 and a dlink xxx??) The netgear uses WPA TKIP and the dlink does not use any encryption. Both work flawlessly. did you install any original cingular cabs when you were using the I-Mate rom?
Re: To FIX WIFI, Going to reflash cingular ROM & test. O
danrw84 said:
i have failed miserably in the attempt to get wifi working properly on my 8125 with the new IMATE rom flashed.
i downloaded the original cinular rom from the ftp and am going to flash it back. I notice 2 files on the ftp, a zip and an rar, i assume they are both the same .nba file because of size?
I am going to use aWizard to flash it back. I am not sure how the splash image portion should be done, and i want to make sure i do everything right.
Anyone done this yet?
Once i do it i will post my results on the 3 routers i have curently, and my success at logging into them with the wizard with the SAME settings ive been trying with the imate rom.
Anxious for any responses. thanks.
Dan
Click to expand...
Click to collapse
I had same problem after upgrading MDA pro with new iMate rom 1.30
I use d-link DSL-G604T wifi router; can connect to home network but when try to surf the web from ppc it always connect through gprs; no access if phone is off.
Manually enter IP address could solve the issue?
ethorn said:
good luck. I have been using the 2.16.9.1 WWE rom on my cingular 8125 since the day the imate rom was noticed on clubimate's site. I have connected to 2 different access points (Netgear WG302 and a dlink xxx??) The netgear uses WPA TKIP and the dlink does not use any encryption. Both work flawlessly. did you install any original cingular cabs when you were using the I-Mate rom?
Click to expand...
Click to collapse
Same rom for me too. I can detect the routers but cannot connect...
I just ran K-JAM_WWE_216901_2169101_020710_ship.exe, let that instal, and also let the customizations install. Nothing else.
Any ideas?
is it not detecting, not getting an IP, or getting an IP but not getting out?
ethorn said:
is it not detecting, not getting an IP, or getting an IP but not getting out?
Click to expand...
Click to collapse
I have the same problem. In fact I started a thread about it a couple days ago. It connects, but doesn't allow data to pass (I do get IP Addy). I also can't use passthrough on the laptop.
I loaded a very few of the Cingular cabs and actually narrowed it down to one of two that totally killed my WiFi connection. However, if you find the thread I made, I also found a registry entry referring to a preferred connection, and MEdia Net was in there (I'm thinking is the problem, but don't know how to change).
Used aWizard and sucessfuly installed the Cingular ROM i got from the XDA ftp site.
WiFi works like a charm, with the same settings that the unit had with the new IMATE ROM. This is very upsetting!
Anyone have any clue why this is?
Also - since I am not using the IMATE ROM anymore, any way to restore the original boot screens, delete the HTC one, and the IMATE screen and replace it with the Cingular? Reason I ask is i need to exchange this phone within my 30 day return period because the keyboard is loose.
Thanks
Hi everyone...
I noticed that I can't get the internet shared from my PC by activesync, I can't use IE or Device Update, but Opera Mini is working, I thought that it's +QuePC's rom problem, and he did his best to help me but no, his ROM is fine, I flashed some other rooms and it didn't work there too.....
is it about proxy? or maybe there are some settings I have to make on my PC?
Hi
I have acquired HTC HD mini recently. I upgraded its ROM to new version 1.36.720.X. But still I am not able to connect Windows Marketplace via my mobile. My GPRS connection is set correctly as I am able to connect Facebook and My Phone successfully. I am facing issue with Windows Live and Marketplace.
I always get error while trying to connect Market place that
"There may be a problem with the Marketservice now. Check your internet connection and try again later."
Can anybody provide me solution for this.
Registry value for HKLM\Systems\Versions\Aku is .5.3.3 (Which is due to latest OS version came with ROM) . Hence that earlier fix of changing value of Aku is not workable though I tried it.
I think that there are many unfortunates like me who have faced same problem.
Thanks in advance for help.
regards,
Pranit
me too having the same prob....am from india...
Still no reply .. No solution from anyone !!! Friends i am dying to get solution..
Hey everybody.
Since updating to the OTA 1.25.405 update, USB internet connection sharing seems to be broken. It used to work before the update.
Phone gets registered as a USB 3G modem
Connecting works, getting an IP (192.168.100.100) works.
... but the default gateway (192.168.100.254) is unreachable when using the connection, so actually retrieving data is not possible.
I'm running the stock HTC Rom on a rooted wildfire - see attached file for software details.
Is anyone else experiencing this behavior?
Have you tried on several OS yet ?
It works for me, as we figured out on IRC yesterday, but not 100% sure of my ROM. Systeminfo shows Puzzle ROM but i am sure i used the RUU from shipped-rom then a backup of my data.
Yep, same behaviour on several OS'es. Device registers fine, but default gateway does not respond.
Forceflow said:
Hey everybody.
Since updating to the OTA 1.25.405 update, USB internet connection sharing seems to be broken. It used to work before the update.
Phone gets registered as a USB 3G modem
Connecting works, getting an IP (192.168.100.100) works.
... but the default gateway (192.168.100.254) is unreachable when using the connection, so actually retrieving data is not possible.
I'm running the stock HTC Rom on a rooted wildfire - see attached file for software details.
Is anyone else experiencing this behavior?
Click to expand...
Click to collapse
This happened to me after an OTA upgrade
I am doing a factory reset tonight and will post the result if it makes things work again (albeit losing my data)
The same problem with USB connection sharing
http://cleanimport.xda/index.php?threads/802404/ - Here I describe exactly the same problem I also have a rooted (unrevoked) wildfire with the original rom with update 1.
What I discovered about it is that the problem does not exist until first restart after a hard reset (factory defaults). I am in the Polish gsm provider Play.
Please help us as I believe there is more of us.
Greetz,
Bronek
Wildfire problem with USB sharing / tethering solved
shipped-roms.com/shipped/Buzz/RUU_Buzz_HTC_WWE_1.37.405.1_Radio_13.53.55.24H_3.35.19.25_release_151892_signed.exe
THe problem existed in 1.25.405.1 ROM . It does not exist after installing the 1.37.405.1 to which I give link above. It is a later version of original ROM. It includes Polish, Romanian, English and STH cyrylic alphabet.
I installed it from an WinXP machine with drivers from the SD card. I encountered problems trying to do it from Win7 originally.
Greetz!
EDIT: Though I experienced some problems with accessing the app market after flashing 1.37.405.1.
same problem here
the same story, after update to 1.25.405.1 sharing stopped working
funny - among many failed attempts to connect, one time was successful!
Hi All,
I have recently installed the DFT ROM om my HD2, I want to sync my contacts using my Windows Live account.
I got this message every time I tried to access the network data connection:
"can't connect
We're having a problem connecting to windows live. make sure you have good reception. if you do, the problem may be on the other end. wait a little while and try again"
and if I tried to access gmail:
"Not updated We're having a problem connecting to m.google.com. try again later.
Error Code: 80072FA8"
I tried both data connection and 3G connection.
does this ROM have such problems? what is the best ROM to install instead of my current ROM?
All the other roms are directly based off the original DFT rom. Only major difference would be the chevron is built in. Was fantastic for me since I had all sort of connect problems with chevron. I would use a rom that has that built in.
As far as data goes you would probably have to enter your apn. I had to. Or an easier way would be to load a rom that had chevron built in and download HTC Connection Setup from the market or sideload it and that should straighten that out.