Screen lock while using Igo 8 - HD2 General

Hi all,
I have an issue concerning the use of Igo 8 with my HTC HD2:
I have set a security password to lock the phone after 0 minutes (classic windows mobile pin code): while I am using Igo 8 the lock screen comes automatically after a few seconds and it is of course disturbing since I need to see the map while driving ;-)
On the settings of Igo 8 the "Backlight always on" option is activated...
For information I use to do the same with my former HTC TOUCH HD and it worked perfectly...
Thanks for your support.

Same problem here, even without a password.
Did you find a solution?

sys.txt
dont know the exact answer but try searching for sys.txt
sure i've seen this in a forum somewhere, its a line added to the sys.txt
good luck

i had the same problem, but to fix this, you have to set your windows device lock settings to something other than "0 minutes" i suggest "12Hours" then igo shouldnt go back to the lock screen, . but now the bad thing about doing this is you phone will not lock automatically, unless you manually lock it with the power button or lock button. doesnt matter to me but to some people it might be a bother. and also, make sure igo>> devive>> power settings is at "backlight always on"

Hello guys, I happened to find a working solution for this, though it's too late for your guys.
My Previous Setting:
1, Switch off backlight after 10 seconds and switch off device after 1 min;
2, Password protected using WM6.5 system Lock after 0 minute;
3, Igo set to "Backlight Always On".
So when igo is navigating, the device always locks itself after some some seconds;
My solution:
1, Install a very small app called SmartLock developed by Chobit Company, it's very small only about 50k!
2, Go to SmartLock's setting and tick "Dim Lock" and "Suspend after Lock"
Done! You still have your password lock future without being locked when driving. When not using iGo, 10 seconds backlight is off, so SmartLock triggers WM6.5 lock;
while when driving IGO backlight always is on which prevent system smartlock trigging the system lock. You can even uninstall smartlock afterwards and it still works!

Related

TomTom 5.21 with Cingular 8525 - screen turning off

Can't find any reference to this issue, so I'm hoping someone might be able to assist.
I installed a legal copy of Tomtom 5.21 on the 8525 and it works great, except for the fact that the screen doesn't stay on or locks when there's no device activity for more then 5 minutes. I have the device being used on battery and the power settings will only allow me to extend the backlight to 5 minutes. Since I use the Tomtom rather infrequently, I don't want to disable the backlight setting. Also the device is set to lock after 15 minutes, which I know is short, but trying to adhere to corporate standards on this setting. Shouldn't the Tomtom software handle the function to control overriding the device lock threshold? I know it should, because when I used the software on a Treo 650, the screen lock function was defeated while Tomtom was running. Am I missing something (a setting or reg key) that would give me the same functionality on the 8525? It is quite annoying to have to either unlock the device after it locks while driving, or risk the possibility of forgetting to re-enable the setting if I manually disable it.
Any advise is much appreciated.
TIA.
Try this:
Settings -> System Tab -> Power -> Advanced tab
uncheck the "Turn off device if not used for" box.
Start TeleNav, go to preferences. Make sure that backlight is set to always on. I have never had any problems with this. Hope it works
Thanks....both very good suggestions, but my main issue is the security kicking in, and the device locking after X minutes. As I stated previously, shouldn't Tomtom defeat the device lock while the software is active? Is there a way to defeat with an alternative method, such a a batch file that would disable the device lock, run Tomtom, then when Tomtom exits, re-enable the security of locking the device?
Any further input would be greatly appreciated.
TIA.

simulate user interaction every X minutes

Hi,
My mobile gets locked after 20minutes of user-inactivity due to corporate security restrictions. This can unfortunately not be turned on.
This is extremely annoying when I use my phone as navigation system (tomtom) as I have to press the screen or a key every 20 minutes or less in order for the phone not to go to the lock screen.
Does anyone know how I can simulate some user interaction? It should preferably be an action that does not actually activate anything (e.g. it does not actually do a screen or button press) as this could interfere with the software running (in my case TomTom).
thanks in advance
You can disable the lock.
First you need to enable the box under "Settings -> Personal -> Lock" again to be able to untick it.
This can be done in the registry:
HKLM\Security\Policies\Policies\00001023
0 = Enabled; 1 = Disabled
Then install Zenyee.com Stay Unlock.cab and soft reset your device.
This program will prevent the lock to be activated again.
thanks I will try that.
kimusan said:
Hi,
My mobile gets locked after 20minutes of user-inactivity due to corporate security restrictions. This can unfortunately not be turned on.
This is extremely annoying when I use my phone as navigation system (tomtom) as I have to press the screen or a key every 20 minutes or less in order for the phone not to go to the lock screen.
Does anyone know how I can simulate some user interaction? It should preferably be an action that does not actually activate anything (e.g. it does not actually do a screen or button press) as this could interfere with the software running (in my case TomTom).
thanks in advance
Click to expand...
Click to collapse
Hi kimusan,
I have a mortscript running in the background (Whenever I start my Navigation, because my screen will switch off after 2 minutes). The mort-script sleeps 60 seconds and after that it resets the timer. Then sleeps again and so on.
I start the the script directly with my navigation program and stop it after the window of the navigation does no longer exists...
If you need the script-file I will send it to you...
For my PPC it works really well.
Hope this will help.
huibuh_1
scroll down this page to find an app called 'KeepAlive'
http://www.scottandmichelle.net/scott/cestuff.html

HTC Touch HD Password Locking

Hello All,
I've just got my self a HTC touch HD and am very happy with it. I've moved from a Nokia N95 and have a couple of questions regarding locking and unlocking the Touch HD.
What I would like to do is
1. lock the touch pad with a time out or on demand when Im not using it.
2. Have a password lock set on the device on demand.
I can do number 1 if I dont put a password on the device lock but If I do then I cant do 2.
They way I am used to using the Nokia is I often want to lock the device with a pin.. e.g over night so no one can snoop.
If I set the PIN device lock, I have to set a timeout value but I can't do it on demand. Even if I set it to 0 minutes, it locks after a while which is annoying.
What I have done at the moment (until I find a better solution is) to set the PIN lock to 0 minutes and unlock it every time it locks when I have it on the desktop. I've also managed to get SU2?? to give me the slide touch screen lock. Not really what I would like....
So my question is... Is there any apps out there that can let me lock my deevice with a PIN on demand and also let me lock the key pad / touch screen without a PIN on demand?
Second query is regarding profiles. I would like to set up 2 profiles, I which has a phone ringtone and a sms message alert and a second profile which has a ringtone but no sms alert tone. I can't seem to set this on the Touch HD. Any one know how I can do this.
Any response will be greatly appreciated.
Regards
Domain105
Hi,
You can set the "end call" soft button to when you hold it down to either "lock" your device or bring up a quick menu for you to choose if you want to lock your device, turn on flight mode, end data transmissions etc.
Hope this helps
domain105 said:
Hello All,
I've just got my self a HTC touch HD and am very happy with it. I've moved from a Nokia N95 and have a couple of questions regarding locking and unlocking the Touch HD.
What I would like to do is
1. lock the touch pad with a time out or on demand when Im not using it.
2. Have a password lock set on the device on demand.
I can do number 1 if I dont put a password on the device lock but If I do then I cant do 2.
They way I am used to using the Nokia is I often want to lock the device with a pin.. e.g over night so no one can snoop.
If I set the PIN device lock, I have to set a timeout value but I can't do it on demand. Even if I set it to 0 minutes, it locks after a while which is annoying.
What I have done at the moment (until I find a better solution is) to set the PIN lock to 0 minutes and unlock it every time it locks when I have it on the desktop. I've also managed to get SU2?? to give me the slide touch screen lock. Not really what I would like....
So my question is... Is there any apps out there that can let me lock my deevice with a PIN on demand and also let me lock the key pad / touch screen without a PIN on demand?
Second query is regarding profiles. I would like to set up 2 profiles, I which has a phone ringtone and a sms message alert and a second profile which has a ringtone but no sms alert tone. I can't seem to set this on the Touch HD. Any one know how I can do this.
Any response will be greatly appreciated.
Regards
Domain105
Click to expand...
Click to collapse
If you go to Start/Settings/Personal/Lock you can set the phone to automatically lock after a period of time.
You can also go to Start/Settings/Personal/Phone/PIN/PIN2 and set a code for when the phone is first turned on to prevent thieves from using your phone.
Hope this helps
Try MobileMagic
You should try MobileMagic (search for it on this forum). I've set it to toggle screen when face down.. all I have to do to turn off screen is rotate my HD over its length axis...

How do you make the phone auto lock and auto standby

hello, i am wondering how i make my phone lock itslef automatically, ie im done using it, so i put it in my pocket, then it locks and goes on standby a few mins after i stopped using it. so that when i next take it out of the pocket see the windows lock screen, im using shadowlines 6.5 rom btw.
i use smart lock to make auto lock and auto standby i think you can find it in the settings -> Power Management.
I use this settings for auto lock
HKEY_CURRENT_USER\ControlPanel\BackLight, AutoDeviceLockEnable 0 change to 1
does that mean that, when the backlight fades out, it will lock?
yes, and you will have to unlock it each time...
Perfect
Neat solution -thank you
It doesntwork. Even on my topaz, the lights dimmed off, it will not lock
http://forum.xda-developers.com/showthread.php?t=505032
Go there !!!

HTC HD2 and Phone Lock problem

Hi,
Phone Lock on my HD2 is set to ask for password if phone is unused for 15 minutes. But my HD2 ask for Phone Lock password each time the screen goes off. Is it possible to change this behavior?
I have the same problem. The phone lock is set to 24 hours, but if the dispaly goes off and i power it on the hd ask for the phone lock password, too.
Can someone help?
Usually if I don't want the phone to lock, I just set the screen not to turn off at all. Under settings, display etc.
HI,
i want, that the screen is locked but only with the slider. At the moment i slide to unlick and then i have to enter the phone lock passwort. But this password should only appear if i restart my HD2 (for this reason i set the phone lock password option to 24 hours).
with my "old" HD this works great.
Download this cab file to your device > run > switch off > switch on
http://forum.xda-developers.com/attachment.php?attachmentid=246722&d=1258236796
Strange, does this fix work for everyone else?
After I installed it, once I press the power button to shut the screen off, when I press any of the hardware buttons, it dumps me to the screen that I was on, but no longer asking me to swipe. I guess I'm looking for the fix so that the below behavior happens:
1) If I press any of the buttons before my "timeout" happens, phone should ask me to swipe my finger to "unlock" the screen.
2) If I press any of the button after the "timeout", then phone should ask me to swipe but then also ask me to punch in a PIN or complex passwd, depending on the setting.
Are there any registry hacks that can do what I described? or does it do exactly that and it's my particular phone that isn't working?
thanks!
m1k1 said:
Download this cab file to your device > run > switch off > switch on
http://forum.xda-developers.com/attachment.php?attachmentid=246722&d=1258236796
Click to expand...
Click to collapse
Having been interested in exactly the same thing, it seems like this cannot be done at present. The lock is either there with a password or not there at all. My current compromise is to set a one digit pin, but that's a bit pointless really.
The slider can be added with S2U2 but this seems to defeat the object somewhat...
I have the same problem. I'd like to be able to lock the device (or at least to turn off the screen) without typing the password at each unlock. I set it to 24 hours.
The patch should be fine as temporary solution
Password lockout problem solved
Great,
this has solved my problem that intermittently and usually overnight I get 'incorrect password message' when I try to unlock, only solved by a soft reset which is rather worrying.
I don't want to have autolock, especially every time I switch on and off like you all.
This little add on allows manual lock (by setting widget on screen with SPB mobile shell), and I have set default to 12 hrs for password screen.
Many thanks
Rory
RoryC said:
my problem that intermittently and usually overnight I get 'incorrect password message' when I try to unlock, only solved by a soft reset which is rather worrying.
Click to expand...
Click to collapse
Ha! Think that's worrying? ...You're right.
I had this a few times in the past and each time was able to solve it by a soft reset.
Not the last time, though. After trying numerous soft-resets, I finally saw no other way out than to hard-reset my device. In the end, it didn't even display the "incorrect password" dialog anymore. I suspect I had entered an "incorrect" password too many times, but the device did not manage to present me with the "enter a1b2c3" prompt that it usually does when that happens.
Very, very frustrating. Some quick googling gives a few reports of this happening to other people, not just on HTC handsets either. Not too many though, so it sounds like it's pretty rare.
(For the record, running 1.48 WWE here, had a 7-digit simple PIN set as the device lock password, with Windows Default display)
i have the same problem it asks for password every time i unlock the phone and the bad thing is that sometimes even correct password doesnt seem to work so that i have to soft reset or wait for half an hour b4 trying the password again , just confused about it . australia
i took out my password for now. i have to reset once in 2 days now to unlock phone. i wont be able to make a call in case of an emergency so better option take it out.
mobilebuddha said:
Strange, does this fix work for everyone else?
After I installed it, once I press the power button to shut the screen off, when I press any of the hardware buttons, it dumps me to the screen that I was on, but no longer asking me to swipe. I guess I'm looking for the fix so that the below behavior happens:
1) If I press any of the buttons before my "timeout" happens, phone should ask me to swipe my finger to "unlock" the screen.
2) If I press any of the button after the "timeout", then phone should ask me to swipe but then also ask me to punch in a PIN or complex passwd, depending on the setting.
Are there any registry hacks that can do what I described? or does it do exactly that and it's my particular phone that isn't working?
thanks!
Click to expand...
Click to collapse
Is there any fix for this problem yet?
with S2U2 you can set up a password config. (require password every: 5mins/15mins/1hr/ 4hrs or 12 hrs) S2U2 seems to eat my battery up though, thats the downside. also you have to download the "disable autolock" cab for it to work from the tweaks an mods sticky in themes/ apps forum. its a shame about the battery drain as this app is awesome but definately worth a look.
sorry heres linkhttp://s2u2.ac-s2.com/
Same problem and no answer until now ?
I also have the problem that I cannot configure my HTC HD2 that the screenlock works without PIN. I like to start the secure lock only after a certain time i.E, but there is only the way everytime with PIN or at anytime with PIN.
Sometimes mostly overnight the device "forgets" the correct PIN and I have to make a softreset. After done this , I can enter the oriinal PIN.
Is there no solution until now ?
Is there any idea what to do.
Read tip 27 of the Sticky Tips and Tricks - http://forum.xda-developers.com/showthread.php?t=583638 - then the PIN will only be required after the timeout, not every time you lock the screen.
The bit where it doesn't accept the password is a known bug reported elsewhere, but there's no fix yet; I wish there was, because I get it occasionally.
Resolve screen lock issue by editing registry
Enable/Disable the Exchange security policy – HKLM\Security\Policies\00001023: 0 = Enabled; 1 = Disabled
Inactivity time
HKLM\Comm\Security\Policy\LASSD\AE\{50C13377-C66D-400C-889E-C316FC4AB374}\AEFrequencyType: 0 = No inactivity time; 1 = Activity time enable
HKLM\Comm\Security\Policy\LASSD\AE\{50C13377-C66D-400C-889E-C316FC4AB374}\AEFrequencyValue: number of minutes before timeout
thesedays74 said:
Enable/Disable the Exchange security policy – HKLM\Security\Policies\00001023: 0 = Enabled; 1 = Disabled
Click to expand...
Click to collapse
Until the buggers push it out again and you get fed up of having to set a PIN then edit the registry every day
Incidentally, is there a way to lock the screen without a PIN after a set period of time? All I can find is either a manual lock or a lock with a PIN.
Slidelock & pin code every time driving me nuts!
thesedays74 said:
Enable/Disable the Exchange security policy – HKLM\Security\Policies\00001023: 0 = Enabled; 1 = Disabled
Inactivity time
HKLM\Comm\Security\Policy\LASSD\AE\{50C13377-C66D-400C-889E-C316FC4AB374}\AEFrequencyType: 0 = No inactivity time; 1 = Activity time enable
HKLM\Comm\Security\Policy\LASSD\AE\{50C13377-C66D-400C-889E-C316FC4AB374}\AEFrequencyValue: number of minutes before timeout
Click to expand...
Click to collapse
I made these exact reg edits (my very first registry edit!) and it's made no difference at all, my HD2 still asks for pin every time I switch off & on.
I want to keep the slide lock to prevent accidental button presses when device is in my pocket, but the pin input is a pain my previous device only asked for it once every 24 hours or after powering up the phone. Has anyone solved this yet?
Should I change the registry back to pre-edited?
Disable hardware buttons
I realized one thing that is draining my battery is the accidental press on hardware buttons when my hD2 is in my pocket. Is there a way to disable the hardware buttons other than the end/power button when the screen is turned off ? It is silly that the press of any hardware button turn on the screen ...

Categories

Resources