Hi, I was trying to install a Rom..
everything was ok until my HD2 restarted and end up with a colored screen but later it stops the connecting to the PC using USB.
I tried several times and never run.
now my device is showing white HTC background and nothing more.
Now I think I've deleted my original Rom and my PC stopped recognizing my HD2.
how can I reinstall the Rom again without connecting to my PC??
I am on Windows7.
Please help me
Follow the install from Micro SD section of the following FAQ
http://forum.xda-developers.com/showthread.php?t=609477
EDIT :- You probably want to read and understand the whole FAQ since you have not made it clear whether or not its a custom rom or an official one, or if you have a HardSPL installed ..
Thank you so much
the problem solved.
I restart the device while I'm holding Volume button down.
Related
Hello all,
I'm not sure but i think my blackstone is on its last legs.
It all started after i flashed to Dutty's last rom the r15 one. Did the usual uspl and eveything went to plan. Then about a week ago the phone frooze, i could'nt get it to reset so had to take the battery out (no biggy). Then tried turning it back on, and it just frooze again right at the windows start-up screen. So did a hard reset and the phone seemed very slow and jumpy.
Then i thought maybe the download of dutty's rom wasn't the best. So today i had planned to install a different rom and see if it was just a bad download or sumthing. And heres the big problem, i can't get the bootloader to connect to my pc.
And what seems strange is that when i enter the bootloader it flashes up with the re/green/blue/white screen andt ehn it shows a grey screen with "loading......." for about 10 seconds then comes back the normal bootloading screen. As usual serial pops up at the bottom, but when connected to my pc it won't show USB!!
I have win7 64, but i have set it up so i can flash using USPL as thats how i got dutty's R15 rom on there.
Any help would be great and hopfully i can get this sorted swn as i love my hd.
p.s
i've spent the past 2 hours searching here and havent found anyone with the same problem.
Thanks
Antony
if you could update from the sd card that would solve some of your problems.but i realy do not know if it is working if you do not have HSPL.
maybe you can find some info on the forums about updating via sd card without HSPL.
or you could try to connect to a computer with other operating system than windows 7.
i am now installing the stock rom.
hopefully then i wil be able to install a cooked rom again.
berbecverde said:
if you could update from the sd card that would solve some of your problems.but i realy do not know if it is working if you do not have HSPL.
maybe you can find some info on the forums about updating via sd card without HSPL.
or you could try to connect to a computer with other operating system than windows 7.
Click to expand...
Click to collapse
Thanks for the help,
I will see what the outcome is from the stock rom. And if i can't get it working again with win7 then i'll have to set up my mini pc (made a pc inside an old nintendo SNES) as thats got xp running
thanks once again
just for my curiosity what method are you using to flash a stock rom if you cannot connect to computer through usb?
berbecverde said:
just for my curiosity what method are you using to flash a stock rom if you cannot connect to computer through usb?
Click to expand...
Click to collapse
Well after more hours spent reading thro web page after web page, i stumbled over someone saying that it could be down to the usb cable and i have a few mini usb one, so tried them all, finally got the bootloader to show the usb.
I was then going to install a cooked rom, but thought i'd be the best to go for stock first.
All is working ok now. I'm not sure if it was down to the usb cable totally tho as it was a bit strange the whole grey loading screen on the bootloader which has gone now with the stock rom.
ah well looks like its fixed for now.
i have a tmobile wing and i have vista so i wanted to update my phone with a knew rom version....so i installed windows mobile device center 6.1 ...but it would not sync ,i uninsalled it then reinstalled it no go....so im wondering how can i hard spl my phone without my pc ....and install a rom ...now i tried my wifes touch pro 2 on the windows mobile device center and it works but my wing wont ....anyone ran into this problem or has a solution ...i read a few threads saying hard reset but that did not work
Do you intend to flash with the flash center using the USB cable or have you considered using an SD card to flash your ROM?
If you are using USB to flash have you tried putting your phone into bootloader mode? While pressing the camera button, press the soft reset button below the volume control with the stylus and continue to hold the camera button until the tri colored screen pops up. When it does, look in the bottom left ( if I recall correctly ) to see if it recognizes the USB connection. It will say USB in that bottom left spot if it is connected and you are ready to flash. Ideally you want to be connected via Active sync but it is possible to flash from the bootloader screen.
Consider flashing via SD card. There are many different threads on this and it really is a very simple process. I hear it is also better for flashing because if you unplug the USB cable during a flash you can brick your phone. Just an idea.
Good luck.
yes i would like to flash from wmdc if possible....ill try the bootloader mode first
i just tried it the bars come up and it says usb in the corner ...but wmdc would not recognise it ...is there some settings on the wing i need to do to get it to sync
1milenia said:
i just tried it the bars come up and it says usb in the corner ...but wmdc would not recognise it ...is there some settings on the wing i need to do to get it to sync
Click to expand...
Click to collapse
To flash from the boot loader screen you just need to go through the steps in the flash center. I never looked to see if my computer recognized the phone while plugged in; I just assumed it did not because active sync was not running. You should be able to initiate the flash through flash center and as you go through the steps it should recognize which rom you have loaded and it should read the rom you plan to install (which should be placed in the RUU folder within the flash center). I personally had to do this process about two flashes ago and can verify that it worked for me without having to "be connected" as far as Window's was concerned.
My advice, just go through the steps in flash center and you should see some progress. Good luck.
i went through the process it tells me nothing is connected then i have to exit
1milenia said:
i went through the process it tells me nothing is connected then i have to exit
Click to expand...
Click to collapse
I would then go through the steps to format a 2gb or less MicroSD card and place the ROM file in the root directory and renaming it HERAIMG. From what I hear, this is a safer way to flash anyway so this should be your method whenever possible. There are many threads describing this process. The hardest part for me was to find a way to properly format my card in my computer. My best advice if you have a Dell or another laptop with an SD slot built it, would be to use another port to plug into. I tried for days to find a way or a program to format my MicroSD card in the built in SD slot but no matter what I did, it would not work. Finally, after much frustration, I tried a usb card reader and managed to successfully format the MicroSD on the first try and have been flashing with this method ever since. Hopefully this is all it takes to get you back up and running again. Good luck once again; I'll have my fingers crossed.
HELLO
Please my phone htc p4350 just going to boot loader and not read an activ sync please iwant soulation
Hi all,
I just did my first experiment at cooking a ROM (did some tweaking and built the ROM) using OS Kitchen. After I copied the ROM to my phone using ROM Update utility, the phone is stuck at this screen:
"Preparing the phone for first use. The Today screen....etc etc"
I am now not able to establish an active sync connection to my PC in order to load a new ROM. What can I do? Pls help...
I have installed the HSPL by jocky
Thanks in Advance
Whew!!! Got it working. For a moment, I thot I had bricked my phone. These r the options I considered:
a) Booting the phone using the mini sd card. I guess one has to use Gold Card for that but I didnt have a mini sd card reader on my PC in the first place so that option was out.
b) Next I read in the forums abt starting the phone in boot loader mode, and this is what finally worked. It seems, as an alternative to getting an activesync connection, one can connect the phone to the PC using USB and then start in bootloader mode (by pressing vol down and end call). This way, a connection via USB is established between ur phone and PC. Now flashing any ROM is just a cinch using stock roms or custom roms (using the custom RUU)
Pfew
Got stuck too and used this trick to load stock rom.
Thx a million
Hey guys.
I have a bricked HTC HD2 here. I installed Android 2.2 on it, and it ran fine for a long time. But a few days ago, it got stuck in a bootloop. It gets stuck on the Android logo and doesn't get past that point at all.
What I've tried (in chronological order):
1. AD Hardreset from aMAGLDR: erased all data, but didn't fix the problem. Kept going in bootloop.
2. AD Recovery: Failed. Doesn't get past the "GO GO GO!!"
3. Repair aMAGLDR using HD2 NAND toolkit: tried repairing (150MB partition size) and installing Clockwork Mod (150MB). Same exact results when trying to get into AD recover. Only diffrence is that I now don't have a ROM on my NAND anymore.
4. Install a diffrent rom: Tried a few of them, but they all keep getting stuck on their bootlogo (HTC, Android, ...).
5. Restore STOCK ROM WM6.5: I'd love to, but I can't get into the three-colors-bootscreen. It goes straight to aMAGLDR, even when I boot holding the right buttons (volume down + power [both short click and long hold]). I had set up the ROM files correctly on the SD card.
6. Install the STOCK ROM using the HD2 NAND TOOL: after going to USB Flash mode and installing the default microsoft drivers (it didn't want to accept the Google Android drivers or HTC drivers I downloaded earlier), the flash utility keeps getting stuck on ERROR 264: CONNECTION. The only thing I can do in the HD2 NAND UTILITY is repair aMAGLDR. Other options result in the same error. Task29 can't find the phone either.
Bottom line, I cannot (ABSOLUTELY not) get into the tri color boot screen. It sends me straight to magldr. Also, my volume buttons are working just fine.
I really don't know what to do anymore. I hope someone can help me, any help would be greatly appreciated
Did you try this?
Download an original win 6.5 ROM for your HTC device from HTC webside.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button
powerofthink said:
Did you try this?
Download an original win 6.5 ROM for your HTC device from HTC webside.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button
Click to expand...
Click to collapse
Did you even read the OP's post, clearly I think not. The OP says several times that they can not get the device to the multicolor WINCE bootloader.Without being ably to boot into the bootloader they can notflash via SD card.
At the OP you can stop trying to flash via USB flasher in MAGLDR, it is only for flashing Android RIMs, WP7 ROMs, and Custom Android recoveries. If you are positive your volume down button works then you probably have some bad NAND blocks, but that is just a guess, with out access to the bootloader you are pretty much only left with flashing Android or WP7 via USB flasher in MAGLDR.
That's problematic... The HD2 NAND utility can't flash any ROMs, since the utility can't find the device (error 264).
I've tried 8 diffrent ROMS (from http://android.hd2roms.com/) by putting them on the SD card and use the "AD SD boot" function, but none of them can get past their bootlogo... All ROMs keep hanging on HTC / Android logos. Some of them used to work in the past, I recall...
Here, try these fixes and read the WHOLE POST :
http://forum.xda-developers.com/showpost.php?p=21725062&postcount=7
Thanks for the link. Unfortunately, none of the solutions worked. The battery pins were indeed bent, but after putting them back in place, the problem persisted.
I left my phone powered down all night and tried booting it in bootloader this morning. It didn't work. So that rules out solution 3 awell.
I've even put it in the freezer for half an hour (solution 5), but nothing changed.. Browsed through the last thread aswell, but there was no stuff I haven't tried yet. I can't even start tetris, since it keeps hanging on a blank screen aswell
The guy in solution #4 was facing the same issue (I think).
Especially the second part of the solution, where he talks to the OP. Read it carefully, and check out the post and thread he referred to.
Holy freakin..
After reading various threads through links in the one you suggested, I stumpled upon something called American Android. I was able to install it through the USB Flasher. Guess what, it booted PERFECTLY!!
My phone works again, thank you VERY much!!
Lorre851 said:
Holy freakin..
After reading various threads through links in the one you suggested, I stumpled upon something called American Android. I was able to install it through the USB Flasher. Guess what, it booted PERFECTLY!!
My phone works again, thank you VERY much!!
Click to expand...
Click to collapse
horayyy for the HD2 & for the guys that gave the solutions!
need information in case of not getting into the bootloader
how can I use the american android + USB flasher method to work for my hd2 if
I am not able to boot it,
can't soft/hard reset it,
can't get into the bootloader (using volume down + end key pressed).
I used android installed on SD card.
It is totally unresponsive for now. volumn keys worked perfectly when it is was working lastly !
Please tell what can bo done to it to get it working or where does the problem lies.
check your battery pins and also battery if it is charged.
and,
Download an original win 6.5 ROM for your HTC device from HTC webside.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card(formatted FAT32.)
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume or without press
Click to expand...
Click to collapse
and then you can try an android rom again..
Another solution?
I had the exact same problem. And I am under the impression that there is no solution for every case. But for me it worked to press the volume down button very softly. I tended to push the button as hard as I could, however when I only pressed the volume down button slightly it went straight to the triboot color.
Hopefully this works for some of you.
Can someone help?
Hi,I want to refresh post, becouse i have exact same problem - can't get to serial bootloader, and in MAGLDR i can use only the USB FLASHER option. If someone could tell me how to flash any new rom only through FLASHER ? Last thing i can say: my problem started from installing this app from google Play play.google.com/store/apps/details?id=eu.chainfire.livelogcat.lite (sry for that, but I can't post URL yet) it might messed up my kernel and i have no idea what to do.
Hello,
I recently found back my hold HTC HD2 and when I tried to start it up..It just hangs on the HSPL/SPL coloured screen. When I first powered it up HSPL by Cotulla was on it and it always ran Android.
So I download the Stock Windows Phone ROM from the Internet and installed it, but it still hangs on the HSPL Screen. So I installed the Stock SPL but I didn't help..
Can someone please help me? I really want to use the phone again but it seems there is a problem. There still is a SD-Card in it which has 4GB...Can someone please explain me how to get the phone back to Stock windows phone?
Can someone please help me?
Try removing sd card.
If still same issue leave sd card out & reflash ROM from links below.
flash hard spl 2.08
http://forum.xda-developers.com/attachment.php?attachmentid=522724&d=1298224028
flash htc rom
http://www.androidruu.com/Leo/RUU_L..._Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
* If it a T-Mobile USA hd2 (red endkey & green callkey) then use that model ROM linked below
http://www.androidruu.com/Leo/RUU_L...adio_15.42.50.11U_2.15.50.14_LEO_1.5_Ship.exe
When rebooting also use the soft reset button next to battery & try it a few times if unsuccessful first time booting.
Maybe useful thread > http://forum.xda-developers.com/showthread.php?t=1344958
load of ROM links (working) , tools & HD2 useful info > http://forum.xda-developers.com/wiki/HTC_HD2
I had the same problem bro, do you want android or windows on the phone?
I want the original Windows Phone back on it.
Mister B:
I followed your steps but it didn't fix the problem. When I start up the phone, the three coloured display shows up and it says 'Serial' on the bottom. Tried the reset button several times and even holding down both Volume-buttons to Hard Reset the phone, but it didn't fix the problem.
The phone always worked fine, what is the problem?
Have you tried doing Task29(full wipe) via HD2 toolkit?
Yes, I already tried Task29 before flashing Hard SPL and Original ROM. I really want to get the Phone working again so my Mom can use it!
Hopefuly someone can help my out with this annoying and weird problem.
After installing the stock rom, what did the phone do? Did it restart to the HSPL screen?
Yes, it restarted back to the HSPL screen. It also shows 'Serial' on the bottom and when I connect USB cable It shows 'USB' on the bottom.
Try flashing stock rom from sd card rather than via usb & see what results you get.
I tried flashing the Stock ROM from the SD-card but it didn't help. It still is stuck at the SPL-screen showing 'Serial' on the bottom when I start up the phone.
Which exact ROM do I need to use for a Netherlands(Europa) HTC HD2 (NON-TMOUS!)?
I hope to hear back from you as soon as possible!
Can someone help me please? Tried everything!