Related
Hello Buds,
I've upgrade my p 3300 a few weeks ago with Artemis_touch_1.0_WWE_rapid
IPL 1.14.0001
SPL 1.14.000
GSM 02.67.90
OS 3.7.0.0
After some days a freeze and soft reset, I made a hard reset, and re-use the upgrade soft ware.
Now its completly block on the boot page with HTC.
I use RUU(in( Artemis_touch_1.0_WWE_rapid) in the Bootloader but it run but after 3% : error 270
If a use a newer RUU ( Release_Aje_fr_1.90Full_YuanYuan) : error 260
please help me I completly lost !
Trux 13
HTC P3300IPL 1.14.0001
SPL 1.14.000
GSM 02.67.90
OS 3.7.0.0
I had almost the same problem. I intented to change my ROM with an WM6 but it faild and the PDA is some kind dead it freezes in the boot screen. is there some tool to change the rom to an original HTC rom or thre is no help. I hope somebady can help me. the version of the ROM that apears on the screen is:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 4.0.0.0
I've tried to :
Hello...
In bootloader run USPL
It run, to 0% >> to 100% but right after : error 270
Still block...
Trux 13
hmm i don`t know how i can get the device to boot loader mode can u tell me how
Bootloader
Go in ths Thread :
http://forum.xda-developers.com/showthread.php?t=306880
Trux13
hi i solved my problem i used one spanish version of the WM6 for P3300 and it works if u want hire is the link http://www.megaupload.com/es/?d=YZOQEF4H
u can install it and then change to one on english its what i will do today and i saw how to enter in 3 color bootloader mode ON/OFF boton + VOCAL + RESTART then holding the ON/OFF + VOCAL
Stillnot working
I tried your *.exe file but not working
Trux
me too . always the error
ipl 1,14,0001
spl 1,14,0000
g 02 67 90
os 1,14,00
i ll be crzy! jesus! someone help me!
how to run the uspl on this tm phone ?
Has anybody solved the problem? I have exactly same errors and can't do anything
Try This:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
i tried this already. Invalid certificate any other ideas ?
woojtekr said:
i tried this already. Invalid certificate any other ideas ?
Click to expand...
Click to collapse
Hi
if you need still help GG9735272
the only solution !!!!
woojtekr said:
Has anybody solved the problem? I have exactly same errors and can't do anything
Click to expand...
Click to collapse
to everybody who is stuck at HTC screen. The only,and i mean the ONLY way to fix this is to find the original rom for your provider !!! belive me,i`ve tried every possible other way.
SD Card Flashing wont work coz your devices are probably CID Locked,so it goes only to 3% flashing and restarts.Finally I found original o2 ROM (German) and it worked like a charm Even the original o2 (English) ROM did NOT work,it had to be the German one,coz probably the device came with German ROM originally !!!.
So my suggestion is,stop trying to flash it with different ROM`s and spend some time finding original ROM from your provider and it has to be the same language as your provider. even if it`s WM6 and your device was originally was WM5,as long as its from your provider and same language it should flash with no problem.I spent 2 weeks to find this out ))
Good Luck to everybody ))
savich said:
to everybody who is stuck at HTC screen. The only,and i mean the ONLY way to fix this is to find the original rom for your provider !!! belive me,i`ve tried every possible other way.
SD Card Flashing wont work coz your devices are probably CID Locked,so it goes only to 3% flashing and restarts.Finally I found original o2 ROM (German) and it worked like a charm Even the original o2 (English) ROM did NOT work,it had to be the German one,coz probably the device came with German ROM originally !!!.
So my suggestion is,stop trying to flash it with different ROM`s and spend some time finding original ROM from your provider and it has to be the same language as your provider. even if it`s WM6 and your device was originally was WM5,as long as its from your provider and same language it should flash with no problem.I spent 2 weeks to find this out ))
Good Luck to everybody ))
Click to expand...
Click to collapse
I have the same problem and I've come to believe that this is the only solution. Just one thing: I didn't back up ROM before I tried to flash (talk about a noob mistake).
So, I ask, I plead, I beg... can anyone tell me where to get an original Orange France ROM for the Artemis (SPV M650)?
To my knowlegde you cant backup the rom from your device. whenever you change your rom, use the USPL tool. It is a golden rule until something better is made.
Here are some tips:
First make sure you have a original factory rom from your provider/brand/etc.
Check with a soft reset if code: SPL 1.11000 appears on the the boot screen. (then it is CID unlocked) Any other number and it is locked so you have to USPL first before you change to any custom rom.
If you flash a factory rom then the SPL resets to a non SPL 1.1100 number again. Use USPL to CID unlock again.
Also avoid Vista (especially 64bit) to use the USPL tool. Do it on a windows XP machine. Also there reports of glitches in the usb connection and active sync when doing upgrades or USPL. So keep you system as clean as possible. Dont use a USB hub and disconnect any other usb devices just to make sure.
Also remove your SD / SDHC card before doing a upgrade.
Sometimes the new rom misses some stuff when flashing. When this happens just flash the rom again. But first make sure if its still CID unlocked by soft reseting and check if SPL 1.1100 else use USPL first.
Even if you did all that, there still can be things that can go wrong. So if you absolutely confident to do a custom rom then do it. Otherwise use original upgrades from your provider
brim
help i breaked my htc p3300
jai lereur 270 jai essaiyer tous les rom rien ne marche ::
p3300 work again
p3300 movistar work again
Flash ELF_USPL.nbh to HERALD phone using herald_uspl_beta.
its booted up normally, but white screen.
even i can see my phone screen with a software 'MyMobiler' from my PC.
can call & recv a call.
anyone help me.
I'm surprised you didn't brick your device completely and permanently. The Elf must have a similar SPL... Your device is not an ELF. Do not flash other devices ROMs into your device. Your the first person I see flashing a non-Herald NBH and have a working phone after.
I flashed an Elf OS.nb to my P4350 and it started up ok, After Booting I had the message "Sim Locked System Crash Call Service"
But did not flash Spl.
I cannot flash any rom. When 2% show a message 'INVALD COMMAND'
what mean?
ivanmmj said:
I'm surprised you didn't brick your device completely and permanently. The Elf must have a similar SPL... Your device is not an ELF. Do not flash other devices ROMs into your device. Your the first person I see flashing a non-Herald NBH and have a working phone after.
Click to expand...
Click to collapse
I agree, its the best way to make the device into a permanent brick, flashing a rom fromanother device.
DO NOT DO THIS
Not even to test and see if it might work.
Your luck in this precedure I compare with playing the lottery
You might win something
but most ppl loose
you should have used your luck on the lottery instead
cheers
Hello everybody,
i have major problems after trying to flash bepe rom 0.66. The rom before flashing was bepe 0.59. The flashing finished fine, but after automatic restart, the windows mobile failed to boot, it stuck on green WM6.1 screen. After all, i tried to hard-reset my device, but nothing helped.
I can enter bootloader, but it is bootloader version POLA200 SPL-1.25.0000. When i try to flash ram, the flashing stucks at 0% and the error 262 occured.
So i have no idea what to do, and how i can reanimate my polaris. I have some questions, in another thread i have read that it isnt possible to flash the rom with this bootloader, i have to install the HardSPL, but i dont know how i can install hardSPL?
Another question is, can i flash the original rom without hardSPL?
Incubant said:
Hello everybody,
i have major problems after trying to flash bepe rom 0.66. The rom before flashing was bepe 0.59. The flashing finished fine, but after automatic restart, the windows mobile failed to boot, it stuck on green WM6.1 screen. After all, i tried to hard-reset my device, but nothing helped.
I can enter bootloader, but it is bootloader version POLA200 SPL-1.25.0000. When i try to flash ram, the flashing stucks at 0% and the error 262 occured.
So i have no idea what to do, and how i can reanimate my polaris. I have some questions, in another thread i have read that it isnt possible to flash the rom with this bootloader, i have to install the HardSPL, but i dont know how i can install hardSPL?
Another question is, can i flash the original rom without hardSPL?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=1983845&postcount=4
i have tried this, but it changed nothing, always stuck in green WM6.1 Screen or by 0% flashing with error [262].
I'm not sure it works but you can try flashing hardSPL by microSD.
Take a microSD and format in FAT32, rename RUU_Signed.nbh in POLAIMG.nbh, insert microSD in Polaris, put it in bootloader, press the power button, it takes some seconds to start, wait.
If it works you can after flash the ROM with the same procedure.
Thanks for all replies!
This is a good idea batista, but i have some questions to this procedure.
Which rom would you take? first hard-SPL and after that a cooked rom?
How i can see that it works, cause you say you dont know wheather it works? Have you made experience with flashing from micro-SD?
Flash before HardSPL and after a ROM, i've Bepe 0.65 ITA.
You can see if it works if after you can flash a ROM, i've never flashed by miscroSD 'cause i've a PC with XP and i prefer to flash via usb but a lot of
people use to flash via microSD.
Trying to flash rom from microSD, has no satisfying effect as well. It stucks on a white screen with blue label "Loading...". Maybe its because 8GB microSD card and it is not able to load a rom from that one.
Please, i am happy about every post. Because i wont have destroyed 450 €
Do you format microSD before ????
Can you try with another one ????
If in FAT 32 doesn't work try in FAT 16.
No i cant try it with another one, but ordered another one on amazon, so on wednesday i hope i can try with another one. Formating with FAT16 is also impossible, i have no such choice in windows XP, but i think FAT32 would be the right one.
I think the main problem is, i have not installed hard SPL, but i dont know how to install without connection to windows xp. And i havent found any thread where it is mentioned to install hardSPL without connection to windows xp.
Have You tried to flash hardSPL via microSD or not ???
Same procedure of ROM flashing.
yes both hardSPL and direct bepe 0.66 but none of them worked. both stucking on loading... screen. Maybe there is a problem with 8GB hc micro sd?
Remove microSD and SIM and try flashing hardSPL via PC with Polaris in bootloader.
i also tried this, but it stucks on 0% updating and on windows xp the 262 Update Error appear. I will give this one a retry tomorrow. But i am not very hopefull.
I'm really sorry, i hope someone has a solution for your problem.
another user named sassa80 had exactly the same issue like you. he did not HardSPL first and tried to flash a new radio rom. the story ended with a RMA return of his HTC.
Hi Incubant,
You may try to flash an *original* ROM renamed to POLAIMG.nbh trought microSD. I used that procedure with a Sandisk 16GB, FAT32 and it worked ok. Before that, mine were kind of bricked on the SPL loader.
I think the step I may have missed the first time was to unplug and replug usb cable the first time I run the update on windows, right after the reset when on the palm screen it said to do so (after all on windows, the application were telling to *not* unplug the cable for 10 minutes). Anyway, if I recall correctly, I failed to update the SPL and at the end of flashing a beta of 6.1 it stopped at 99%. So... I was stuck - couldn't reflash anything. Nevertheless, the procedure that I mentioned on the first paragraph did solve it. After that, I had no problem installing the HardSPL and any other ROM.
Good luck
Another one here with the same problem.
Tried everything I can think of and still stuck on the 6.1 boot screen.
The people who are having problems above with the latest flash e.t.c, which brand of device you using? XDA Orbit II?
For me, it's an O2 Orbit II.
~J~ said:
For me, it's an O2 Orbit II.
Click to expand...
Click to collapse
I thought you might say that, I also have an XDA Orbit II and have noticed a different set of behaviours under the same conditions as compared to the HTC Touch Cruise users. It appears that an Orbit II and a Touch Cruise are both a Polaris but an Orbit II is not a Touch Cruise if that makes sense. Apart from the quite apparent visual differences between the two, are there any internal differences we are not aware of? The Orbit II always appears to act differently, some tweaks/roms/advice have outcomes different to the touch cruise, especially certain reg tweaks.
From using the latest bepe ROM it appears to be quite buggy, also reported by other users, look at bepe ROM thread. Hopefully bepe which deal with the bugs because his ROM, in my opinion, is by far the best.
I too had the STUCK-AT-GREEN-SCREEN issue when I flashed the latest ROM, I waited about 5 minutes, then HARD-RESET, then when presented with the GREEN-SCREEN again for a few minutes, I pressed one of the upper buttons (green phone / red phone).
I hope you sort the problem out.
I downloaded the tyler wing kit and copied the cabs over to the phone.. i installed the cabs and reset the phone and now it is loocked on the boot menu as follows :
(htc background)
IPL 5.04.0002
SPL 5.04.0000
GSM 02.79.90
OS 5.4.0.0
AND DOES NOTHING...
perform hard rest and fat format comes up and returns to same screen
removed battery and still the same .
I tried applyinf wm6 ruu since this happens, but will not apply as unable to sync to apply....
is it a brick now ? or is there anything else i can do to recover ?
hold fire on that for now... i managed to figure out the bootloader mode and am currently uploding a rom ...
looking to upgrade to wm6 with the touchflo interface... any hints would help ! .. ps the wm6 rom wouldnt load becasue of a vendor id mismatch ??
ok,,, managed it get it bac up and running with :
RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe
tried the tyler wing kit again and locks on boot after first 3 apps installed any ideas or links to getting wm6 with touch flo installed ? ( htc p4350)
montythegod said:
ok,,, managed it get it bac up and running with :
RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe
tried the tyler wing kit again and locks on boot after first 3 apps installed any ideas or links to getting wm6 with touch flo installed ? ( htc p4350)
Click to expand...
Click to collapse
What is the Tyler wing kit? Never heard of it...
found it here http://forum.xda-developers.com/showthread.php?t=327046
(sticky on main page
I managed to get wm6.1 rom on the phone now tho
hello guys,
I have a huge problem!! Today I went to restart my HTC HD Blackstone but the touchscreen does not work anymore! the phone has not been damaged or displaced ..
The phone is still under warranty HTC, but I changed the rom internal ....
I need to send in assistance to replace the original ROM but I can not install via SD ... I have SPL-1:56 ...
I can do ??????
:-(
.
"i think" you install the 1.14**** spl attatched where you get the olinex one from..
you must flash to original htc rom first
...
try soft reset first or have you tried that?
Touchscreen not Work
thanks, but How I can istal the SPL 1.14 without usce touchscreen?
:-(
connect device to the computer and flash from the ruu.exe file!
hope this helps