Related
Hy..
belive me.. i tried nearly everything... and ive been through all of these posts... but i dint find anything helping me out with my problem...
ok, i try to explain in a short way!
I want to upgrade my "old" xda orbit (rom: 3.4.207.2GER, Rom Date: 18.04.07) wit a new rom ( something like "Artemis_Touch_4.02_Full_with_4_sided_cube")
BUT IT DOES NOT WORK!
Yesterday i updated my "new" DIAMOND to a new rom (Bepe 0.94)... so i basicaly know what to do..
But my ORBIT doesnt like to be upgraded..
USPL: doesnt work
RUU: doesnt work
Artemis_Touch_4.02_Full_with_4_sided_cube: doesnt work
downgrade to wm5: doesnt work (dindt find the correct one, i guess...)
now i am out of any more idears... ive got a lot of error messages... such as 260, 270 corrupt files, and many more...
wonder why my orbit is still running after all these unfinished and unsucessfull "updates" but still running with original german O2 WM6 system.
Does anybody can give me a hind what do do, how to update or where to look?
Thanks a lot...
Using Artemis USPL: in the DOS window always the message "program cannot be found".. running aprox up to 50% and stops, than closing the DOS windo
the orbit stays, after a short action showing the Linux guy, with a "white/black" display..
than using the RUU: still connected via usb to my pc.. still black display..green LED on top of the device on..checking the rom.. showing mine correct (3.4.207.2) to 9.99
clicking "next": starting updating... pda display gets threecolored.. than gray.. showing 99% and than 100% after just a few seconds..
Prog stops.. telling me that the file is corrupt (Error 270).. my device reboots and starts with the O2rom
I downloaded the Artemis USPL several times from several locations.. always the same message...
Hard to explain.. but i hope you got my point?!
Btw.. thats just one of the ways i tried.. and just one of my errormessages..
Thanks
Did you tried to remove your SD card before you flash?
Cheers
I Got It I Got It
Thanks "Zecanilis" for your answer.. but that was not my problem.... i took out the sd card as well as the sim card.. as i said.. i tried nearly everything!
But this morning ( i spent the whole night in front of my computer ) i foud the mistake.... an easy one!!
The "Artemis_USPL" file, you can find in all of these threads, is not working with my devices (pc and/or ppc)!?! i dont know why.. but it doesnt.
As i told you i always got messages in the DOS window "program cannot be found", "program cannot be used"... and the intallation skipped all files and stopped always around 50%.
but at 3 in the morning i found a USPL file in the net, with a different name, and it worked with the first try!!
The File is named "arte_uspl".
Just worked fine and smooth 10..20..30....... finisehd.
I am able now to install any rom I like!
Btw... i swithed to Mossis V2.2Ger - a very nice one i think.
But maybe i'll try some more...... because i am able to!
Take care and a lot of fun with your devices!
Bobo
I have the same problem
Where can i find/download the "arte_uspl"?
Thanks for your help.
well...good question
i didnt write down the link.... i dint save the link... sorry!
what i did was to save the file on my computer!
i tried to uplad it to this post... but it didnt work?! sure i am to stupid to do it right!?
so plase help me to post it here, and i will do so!
or gimme a mailadress to send it to!
sorry for beeing so stupid!
greetings
orbit do not boot, do not flash
Hello,
i am searching for a solution of my problem:
i updated my orbit with the new mossis ROM and everything was well, and i used my orbit after this update!
Yesterday i Reset my device and after this the orbit dosen't start again!
After showing the bootsplash the device hangs
So i try to flash the device again:
first i try this:
- start the bootloader manually (voice button + reset)
==> shows: IPL 3.04.0001
SPL 1.11.0000
- starting the ROM Update Utillity
==> the screen of my orbit is grey and shows the update bar (0%)
==> RUU shows the following mesage: ERROR[300]: INVALID UPDATE TOOL
(i used the original german o2 update file)
second try:
update with the SD-card:
- SD-card (512MB) formated with FAT32
- copy the image file xxxx.nbh to the SD-card and rename it to ARTEIMG.nbh
- start the bootloader manually (voice button + reset)
==> screen: Checking SD contens
==> Update SD Image?
- bushing the volume down button
==> screen is red green blue and shows IPL 3.04.0001 and SPL 1.11.0000
Update flash do not start!!!
if i try this sd-card based update with the RUU_uspl_signed.nbh file, the device bootloader start and update the ROM
have anyone an idea???
ohs said:
Hello,
i am searching for a solution of my problem:
i updated my orbit with the new mossis ROM and everything was well, and i used my orbit after this update!
Yesterday i Reset my device and after this the orbit dosen't start again!
After showing the bootsplash the device hangs
So i try to flash the device again:
first i try this:
- start the bootloader manually (voice button + reset)
==> shows: IPL 3.04.0001
SPL 1.11.0000
- starting the ROM Update Utillity
==> the screen of my orbit is grey and shows the update bar (0%)
==> RUU shows the following mesage: ERROR[300]: INVALID UPDATE TOOL
(i used the original german o2 update file)
second try:
update with the SD-card:
- SD-card (512MB) formated with FAT32
- copy the image file xxxx.nbh to the SD-card and rename it to ARTEIMG.nbh
- start the bootloader manually (voice button + reset)
==> screen: Checking SD contens
==> Update SD Image?
- bushing the volume down button
==> screen is red green blue and shows IPL 3.04.0001 and SPL 1.11.0000
Update flash do not start!!!
if i try this sd-card based update with the RUU_uspl_signed.nbh file, the device bootloader start and update the ROM
have anyone an idea???
Click to expand...
Click to collapse
Dear ohs,
There are many ppl, who have this Error 300 issue, but there is no help/solution available anywhere. Maybe the best option is to send your device to HTC, I guess they'll replace your motherboard, if in warranty you'll be lucky!!! unless they find out if you have messed up the device
xda orbit
same problem here,i tried eveything,my xda orbit wont flash it starts to instal the new rom but when it reaches 3% it resets himself ...any sugestion guys ? i tried upls,hard-spl etc arthemis rom everything . help please
Guys, I would suggest, if your device is under warranty, do send it to HTC Service center rather than breaking your head with it. Even I have been through such problems but ultimately I sent it to the service center and expecting my device in a couple of days with a motherboard changed.
If your warranty is not valid anymore then you are in trouble.
Good Luck
Xda Orbit
dose anyone knows the right stepts to flash this Xda Orbit German rom with a wwe rom ? please post it so we can try,i have this xda for 1 year now and iam still using the german rom on it,i what to start to use it but what can i do ? learn german ? somebody help ! i tried to flash it with RUU_Artemis_O2_UK_3.4.206.2_4.1.13.50_03.06.90_Ship all gose well untill 3 % from update the xda resets and gose back to his rom,please help me out ! i`ll mae a donation for this cause ! Thanks
arte_uspl
bob75 i found the rar arhive for your arte_uspl the link is : http://rapidshare.com/files/36943423/arte_uspl.rar
Hello,
i have a HTC Elf 128/256 with rom ONYX 3.0 (after hard reset ).
The USB connector in built-in the phone is a kind of broken:
can charge the battery with the USB cable but can't synchronize.
The device is discovered with errors in windows task bar.
I tried to sync some more phones and they work.
Now i want to use the warranty but the phone has a cooked ROM.
Is there anyway to reset the phone to a warranty supported ROM?
I have tried to flash with the sdcard but had no results in the tricolor menu.
If someone has any suggestion, i really need it!
Thanks!!
piriri007 said:
Hello,
i have a HTC Elf 128/256 with rom ONYX 3.0 (after hard reset ).
The USB connector in built-in the phone is a kind of broken:
can charge the battery with the USB cable but can't synchronize.
The device is discovered with errors in windows task bar.
I tried to sync some more phones and they work.
Now i want to use the warranty but the phone has a cooked ROM.
Is there anyway to reset the phone to a warranty supported ROM?
I have tried to flash with the sdcard but had no results in the tricolor menu.
If someone has any suggestion, i really need it!
Thanks!!
Click to expand...
Click to collapse
What kind of SPL do you have on your Touch? What;s your device CID?
You should be able to flash a stock ROM (if one exists) from SD for sure.
Hello,
here is the info you asked for:
Device ID: ELF010050
CID : HTC__506
IPL: 2.20.0002
SPL: 2.26.0000pof
ROM version : 2.27.80.1
ExtROM version : Cooked by dsixda
Operator version: Onyx 3.0
AKU version : 1.2.6
Page Pool: 8 MB
RAM Size : 128 MB
ROM Size : 256 MB
Model No. : ELF0300
Part Number: 99HEH034-00
MCC+MNC: Not found
I can access the Storage Card from the file Explorer in the ELF, but can´t flash the ROM.
I am trying to flash with a cooked rom (ONYX 4.0). This process should only bedone with stock ROM's or it works with cooked rom's too?
Thanks!!
I already tried to flash the ELF from the SD Card with the stock ROM that suits my CID and SPL.
No results flashing from the card.
When the ELF boots in tricolor mode, how can i start the flashing process?
Any help would be appreciated!!
Thanks!
Hello piriri
on the ELF upgrading forum, look for the one that says restoring your Touch via the bootscreen.
once on bootscreen, make sure you have the original stock rom (check the HTC site for details). ELF for ELF, ELFIN for ELFIN. If you're using an ELF, get the 1.11x rom, flash it and you'll be back. 2.20x for elfin.
make sure you uncheck the part that makes your usb connect "advance network connectivity" on your settings. then your elf will be fine.
peace
Hello Samaral
First thank you for your answer, but i can´t synchronize the ELF to computer through USB, i have the USB connector broken in the phone!
I need to flash a ROM without using the USB cable!
I tried flashing from the SD Card but it's not starting thr flashing process...
Maybe i can have a help from someone??please??
Thank you!
piriri007 said:
Hello Samaral
First thank you for your answer, but i can´t synchronize the ELF to computer through USB, i have the USB connector broken in the phone!
I need to flash a ROM without using the USB cable!
I tried flashing from the SD Card but it's not starting thr flashing process...
Maybe i can have a help from someone??please??
Thank you!
Click to expand...
Click to collapse
Make sure your SD is formatted in FAT32 not FAT
I've got the same problem,is it possible to do a rom update via bleutooth?
Hello
I have this problem since i change my rom to Onix( i don't remember what version)
Bu if you try several times one time it gonna work and then put the other ROM ( I put Onyx 4.0) and know works great.
Sometimes you have to put the cable and wait 5 minutes to start the sync.
Try and then tell us if you succeed.
joao M
It might be this..
On some devices I've noticed that the metal strips within the connector (in the phone, top part of the connector usually) looses away from its original position, this actually results in the problem you mentioned. If its not broken you may be able to unbend it and restore it to the original position with a thin pin or something of that sort. This should make things work again.
To prevent this from keep happening just be carefull when you plug/unplug your cables into it. Be gentle when inserting the cable and make sure to put the pressure to insert it only when its in the exact position.
hope this helps... good luck
Try first
Hi Piriri
another simple check before all the rom flashing,
1-change the cable, worked for me more than once.
2-go to Settings>>>Connections (in some roms System)>>>>Usb to Pc>>>>uncheck "enable...etc".
I hope it helps
Hi, what´s the name of file by flash from sdcard? in polaris the name is POLAIMG.* and in elfin?
Install the latest activesync
My guess is that your pc is running windows xp.. and you have not installed the latest activesync on your system.. you can download the latest activesync installer(version4.5) from www.microsoft.com/en/us/downloads.aspx/.. install that and then reconnect your device.. if you are running windows vista.. try to update the usb drivers.. again you can download these drivers from microsoft.. you will have to search for the appropriate drivers and then install them..
If you want to send it back under warranty, mine went back to tmobile with a cooked rom. they didnt say anything but flashed it with the rom that looked like a stock nike rom!
when you enter in bootloader mode before the trecolor screen you can see a white screen flasing, well, at this white screen is where you can flash from the sd, if your phone dont stay there and ask you to press power buttom to flash its cause you havent a proper sd, i meant fat 32 formated sd with ONLY one file in it named elf0img.nbh, if you use it correctly it have to work por narices
hi..
I installed a cooked rom.. but my p3600 has some problems and i have to send it to the brand. I have to install the original wm5 that i already have, but I don't know if the hard spl is automatically removed, or how to put it as it came originally to send it to the brand.
i dont have a lot of experience with this.. if anyone can help me please!
thanks
PlasticFX said:
hi..
I installed a cooked rom.. but my p3600 has some problems and i have to send it to the brand. I have to install the original wm5 that i already have, but I don't know if the hard spl is automatically removed, or how to put it as it came originally to send it to the brand.
i dont have a lot of experience with this.. if anyone can help me please!
thanks
Click to expand...
Click to collapse
You need to Cid unlock your mobile to flash with **** Roms
http://forum.xda-developers.com/showthread.php?t=293957
but i have flashed with cooked rooms.. and i want to put original to send to HTC because my pda have some problems.
its only need update with original rom? must remove hard spl (olipo v1.30) ?
and how?!
i don't think you can ... as your boot screen always shows even if you flashed FULL ROM from original (include SPL, radio, rom....)
when i press cam, power and reset button, i got this:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
(no more hard-spl 1.20 i think) is this ok ?
when i power on normaly, it shows the white screen "HTC" and some numbers and radio version.
Then the screen without the numbers and goes to WM5 that I updated from the file HTC P3600_RUU_Trinity_HTC_PTG_1.23.4...blabla.....
i think my p3600 is original ? and can i sent to the manufacturer now ?
(because my screen, somethimes have some lines and i must reboot, and then, sometimes the screens stills black..) :/
Hello people ...
not much to say ...
i think i bricked my phone .... =(
i installed one of the ROM downloaded from here ...
and it brick my device ...
what should i do ? :`(
it says on the screen :
" Your OS ROM isn't customized for you hardware.
Please refresh the proper ROM code or contact the service center. " ((
p.s. i cant install other ROM
couse it cant see the usb (((
i got the problem solved =)
guess it came from it self couse i was nurvios )))
i entered the hard boot menu pressed the UP (volume) button and then pressed 2 time i think the up(coluve) and down(volume) then it not entered the boot option but connected the USB ...
i installed other ROM and its working fine again ... )))))
so far I have seen 1000 people on xda developers that assume to have bricked their phone...and probably 1 out of 1000 has truly done something stupid to brick his phone.
[email protected] said:
so far I have seen 1000 people on xda developers that assume to have bricked their phone...and probably 1 out of 1000 has truly done something stupid to brick his phone.
Click to expand...
Click to collapse
And then there are the 999 who think they have done something clever, but still bricked their phone...
gladly im not one othe 1\1000 people that done it =)
i had my luck on this one =)
i guess i was celebrated too early...
i tryed to delete the HSPL
by the video tut ... ( yeh yeh ... what can be more easier )
well ...
it says to get a stock rom ( i did it )
it say to put it on the SD after formating it to 32 bit ( i did it )
then hard boot ... ( i did it )
power button ...
and ........... puff ...
now i get: ( On boot ):
PB81100 HX-BC
SPL-1.42.0000 XE
microP(LED) 0x05
microP(TOUCH) 0x03
Upgrage ROM code error
Please try again ...
WHAT IS THAT ? :`(
dose it means i brick it ?
(p.s.)
Tryed to install the HSPL again ...
the install is successfull. ... but no change on the device ...
you have used the wrong rom.
you must use the correct rom that was on the phone when you got it.
Or the correct region. In doubt, just enter your phone's serial number on the HTC download page (here for 1.66) to make sure you get the correct official rom.
Then extract it, put the nbh on your card, etc.
" Sorry, this software download is not suitable for your device. "
hhmm .... i had the hong kong rom originaly ...
maybe it means i have to download it from an hong kong htc site ?
yes....choose the hk site
Are you solved the problem?
How?
I have a similar problem.
I have the same screen at boot, but when I try load anything my device as stuck in progress bar (0%) even for shipped rom’s…
This happens when I try load a shipped rom from SD. Before that I have loaded several cocked rom’s from SD without problem.
the fix...
hold volume up and down together and insert the USB cable then run a different or a good ROM
Bricked friends hd2!!!?!?
PLEASE HELP... I was trying to install android throught NAND on my friends hd2,, in the process of flashing the ROM via Magdalr or whatever.. it froze so i pulled the battery.... and it doesn't turn on. I've pulled the battery on my other friends HD2 so im confused as to why this one in particular does not turn on! PLEASE HELP!!! SHE'LL KILL ME IF SHE FINDS OUT!!!
EDIT: PHEW i figured it out... but im having trouble installing these ROMs
Did i brick my phone??
So my brother was trying to do who knows what to my hd2 and now the hd2 powers on and it says "stick together" (its a t-mobile hd2) and it just stays on that screen.. I'm not the most tech savvy person so bare with me... usually below where it says "stick together" it would show a bunch of numbers and codes and after a few seconds it would load windows mobile and the phone would work fine. However, mine just stays on the stick together and theres no more of those numbers and codes on the bottom.
Did he just brick my phone? And if he did... HOW THE HECK DO I FIX THIS???
HELP :*( i need to use my phone!!
Thanks
Heh I'm in the process of doing my very first flash to get a full install of Andriod 2.2 on my HD2, once I find out a specific answer I've been looking for I'm gonna start the process
HD2 brick
I just bricked my HD2 (USA T-Mous). I tryied update RADIO when was progress on PC 100% in PDA 96% and freezed. I just pulled battery and phone is bricked. When I connect to PC via USB, i can listen twice short plug sound and this is all. No bootloader, nothing. Any reason? Thanks
Did you try to turn on your mobile pushing "vol down" to load usb mode ?
After that, you can flash an official rom.
That "saves" my Leo...
NarkotiQUE said:
I tryied update RADIO
Click to expand...
Click to collapse
if the radio had 51 in the version (example 2.07.51.xx) then it is a brick, dead, gone.
NarkotiQUE said:
I just bricked my HD2 (USA T-Mous). I tryied update RADIO when was progress on PC 100% in PDA 96% and freezed. I just pulled battery and phone is bricked. When I connect to PC via USB, i can listen twice short plug sound and this is all. No bootloader, nothing. Any reason? Thanks
Click to expand...
Click to collapse
Did you have any luck? Does your device have HSPL? Let me know if you still need assistance.
xtntx said:
Hello people ...
not much to say ...
i think i bricked my phone .... =(
i installed one of the ROM downloaded from here ...
and it brick my device ...
what should i do ? :`(
it says on the screen :
" Your OS ROM isn't customized for you hardware.
Please refresh the proper ROM code or contact the service center. " ((
p.s. i cant install other ROM
couse it cant see the usb (((
Click to expand...
Click to collapse
hi i'm looking for a motherboard htc hd2 bricked? can you sell yours?
hi,
my HTC TyTN II can't boot.
it stopes here
HTC
R 1.70.19.09
G 25.83.40.02H
D 3.34 shifu
that's happend after a reset
help please
have you solved your issue? if no try hard reset..
Hi,
yeah a tried hard reset , but nothing changes
now it works, thanks a lot Shifu
My phone is stuck again in the BIOS verification :s
reply please !
make sure its firmware is updated to latest one
i can't,the device is stuck,I cant connect it to my pc to update the rom
Flash using sc card
you can try to flash with SD Card, as described in the wiki: http://forum.xda-developers.com/wiki/HTC_Kaiser/Flashing
"How to flash your kaiser using the microSD card"
Greetings
cinq
thanks man ,you saved me. love you