Hi there,
when I plug my phone into my PC, it doesn't connect anymore. It charges but I don't get any connection options on my phone and my pc doesn't see it.
Also tried resetting the phone, no luck.
Go to the settings tab and go to Menu, All settings, Connections, USB to PC and make sure that "Ask me first about USB blah blah blah..." is ticked. Also, tick whatever you want as the default USB connection type (ActiveSync, Disk Drive etc..)
Hope this helps
Activesync and "ASk me.." were already ticked. I tried changing the options and then changing them back to see if I could force it to take effect but no luck
ftr2k8 said:
Activesync and "ASk me.." were already ticked. I tried changing the options and then changing them back to see if I could force it to take effect but no luck
Click to expand...
Click to collapse
I expienced the same problem, caused by TomTom Home. This piece of ugly written software started at boottime, preventing to use activesync (even when I choose not to be a drive). I disabled it and now it works perfect, whem I need TTH for updates I start it manually.
hoorn666 said:
I expienced the same problem, caused by TomTom Home. This piece of ugly written software started at boottime, preventing to use activesync (even when I choose not to be a drive). I disabled it and now it works perfect, whem I need TTH for updates I start it manually.
Click to expand...
Click to collapse
I don't have Tom Tom installed unfortunately!
When you choose diskdrive, is the HD2 then visible in your browser as an external drive?
No, but now I'm getting "One of the usb devices attached to this computer has malfunctioned" errors
I've tried in various ports on my pc
Try reinstall either activesync or mobile device center. Try also to connect the phone to another PC or laptop and check if the phone is responding ok (eliminate the good parts)
hoorn666 said:
Try reinstall either activesync or mobile device center. Try also to connect the phone to another PC or laptop and check if the phone is responding ok (eliminate the good parts)
Click to expand...
Click to collapse
I think I've reached the problem. Dunno why it took so long to check this - it's so obvious. My new puppy is a bit of a chewer, and there's now some exposed cable on the wire. Enough intact to charge, I guess, but no data.
Typical type b-micro, yes? Can easily get a replacement.
Related
Hi,
My hdd gave up in my laptop other day bought another 1 installed vista
now im having connection problems both with bluetooth and via usb with my
t-mobile ameo
does any 1 know if there is a update some where to get them working again
ive done a windows update and installed windows mobile device centre
thanks
Im running Vista business edition and had no problems at all - even updated my rom!
What do you get when you plus the Ameo in? Does it show up in the Device centre?
sync centre has just got the usual offline folder
windows mobile device centre 6.1 has the mobile device settings and the not
connected bit at the bottom
its so weired it all synced b4 theres nothing different installed setup etc...
on the device it says "to synchronize this device, you must install activesync 4.5 or newer on your desktop computer"
thanks
How Wierd.... mine lliterally just fired up autoomatically.
In your PPC, go to SETTING -> CONNECTIONS -> USB TO PC. Untick the "ENABLE ADVANCED NETWORK FUNCTIONALITY". Remove the connection by unplugging your USB cable and the plugging it again. No guarantee this will work, but you may try.
IT Works
i tried the unticking the advance option still didnt work...
i thought about the user account control in vista this came as my mobile
data card for my laptop wasnt installed correctly and after checking out the
install log and it saying access control n a load of other stuff saying
permission denied etc.... i thought id turn vistas user account control off this
fixed my data card problem ......i then pluged my t-mobile ameo in and hey
presto it picked it up as a black HTC Advantage due to my mobile 6 rom
upgrade
I believe Active Sync won't work on Visat, you need Mobile Device Center, available here
http://www.microsoft.com/downloads/...ea-9df9-4920-af33-3a0e2e4e7beb&displaylang=en
Makes sense as I have crappy user control switched off as it annoyed me greatly!
Vista Utlimate Connects but refuses access.
This solution worked instantly for us.
cayotte said:
In your PPC, go to SETTING -> CONNECTIONS -> USB TO PC. Untick the "ENABLE ADVANCED NETWORK FUNCTIONALITY". Remove the connection by unplugging your USB cable and the plugging it again. No guarantee this will work, but you may try.
Click to expand...
Click to collapse
We had downloaded the upgrade device driver and the Windoze Vista replacement for ActiveSync... as Vista dictates on first connection.
We got the sound effect acknowledging USB connection, but Windoze Mobile Device Centre obstinately ignored the connection.
We tried the tricks suggested by the mages and sages, like adding ports etc. to the firewall, and deleting the driver in the Vista Device Manager... forcing it to re-install. None of it worked for the Ameos.
We removed the Mobile Device Centre and the upgraded driver, resolving to connect to the Ameos only via our XP Tablet instead.
It seemed that the USB connection was being made, but something else was blocking it.
Then this possible solution (reproduced here) caught our eye.
It was the work of a moment to follow the path and remove the check in that item.
Imagine our surprise and delight when we connected to Windoze Vista Ultimate again... and remember that there is no upgraded driver or Mobile Device Centre installed now... and we got the "what shall I do with this device" dialogue box. We checked the item to open the device in a folder each time and... it did... and does... just that.
We do not need synchronisation for our use of the Ameos since all of the significant email and document traffic occurs on the laptops and Tablet, but we can appreciate why someone would want that Mobile Device Centre to be re-installed. We won't be doing that anytime soon though.
Congratulations to you cayotte, and this forum as a whole.
BTW, I read about the problems folks have with the Microdrive. We have two Ameos. One works great with the Microdrive, the other one does not, and we have to leave it for data files only.
The older unit is the one which works well.
We already had the User Account Control turned off so I cannot say if that had any effect.
QF
cayotte said:
In your PPC, go to SETTING -> CONNECTIONS -> USB TO PC. Untick the "ENABLE ADVANCED NETWORK FUNCTIONALITY". Remove the connection by unplugging your USB cable and the plugging it again. No guarantee this will work, but you may try.
Click to expand...
Click to collapse
On my old PC my 8525 connected to XP no problem, than I upgraded to Vista (dual-booted actually) and it just stopped working on both XP and Vista. Now I have a new pc and my problem still remains. I connect my 8525, sometimes the orange light goes on, sometimes it doesn't. When I installed WMDC (newest version) it didn't recognize the 8525 as being connected, so it installed drivers for an unrecognized device or something along those lines. Then sometimes when I connect the 8525 to my pc, it installs drivers for the 8525, and the box that says "enter your passcode" pops up. I enter it, and it'll either say it's wrong ( when it's right ) or the box will disappear and nothing will happen. It just never connects and I really want to put music on it. Any advice is much appreciated.
Edit: I went into ActiveSync on the phone and deleted all the PC's it had partnerships with already.
Read MrVanx's guide. It contains just about everything you'll ever need to know
I tried the guide but it didn't work because in Device Manager nothing shows up... no matter which USB port I put the 8525 in, it doesn't show up anywhere.
delete partnerships off the PC also, and temporarily remove your passcode.
try unchecking the advanced network functionality box in settings/connection/usb to pc
if worst comes to worst, backup stuff on your pocket pc and hard-reset
>>try unchecking the advanced network functionality box in settings/connection/usb to pc
Look for a "Windows Mobile Remote Adapter" in the network section of Device Manager. If you've already tried to connect with the "Advanced Functionality" checkbox checked, then the mobile remote adapter may have gotten installed. Once that happens, changing the "advanced functionality" won't help, and you won't be able to connect your 8525.
You need to unplug the 8525 from USB, then go into device manager and remove the mobile remote adapter, then change the "advanced functionality" checkbox on the 8525, and then connect your device again..
This is what happened to me, and how I finally got it working. Hope it helps you.
Brian.
There was nothing in Network Adapters or anywhere in Vista about it. I tried removing the password and connecting it without the thing in USB to PC checked off, still no luck. I would back everything up and hard reset but I've seen so many posts by people saying they've hard reset, lost everything; and then they came to realize it still didn't work =(
8525_b0tch said:
There was nothing in Network Adapters or anywhere in Vista about it. I tried removing the password and connecting it without the thing in USB to PC checked off, still no luck. I would back everything up and hard reset but I've seen so many posts by people saying they've hard reset, lost everything; and then they came to realize it still didn't work =(
Click to expand...
Click to collapse
Isnt that the point of backing up, so that you DONT lose everything?
^^ I still lose all of my programs and all of them are on my old pc
8525_b0tch said:
^^ I still lose all of my programs and all of them are on my old pc
Click to expand...
Click to collapse
If you get a trial version of spb backup and do a full one, it does more than just contacts and such, it'll do EVERYTHING, so when you put everything back its exactly the same as when u left it. Programs included.
I'm at a complete loss with activesync. I've done everything I can think of and I can't get my computer to see my 8525. I've reinstalled activesync and hard resent my device. When i plug in it says
one of the usb devices attached to this computer has malfunctioned and windows did not recongnize it
usb root hub (2 ports)
- unknown device
- usb composite device
Am I missing some sort of driver somehow? I don't know what to do..please help.
Hey i had the same problem. Is this your first time installing/using activesync??
Well what I did was this:
-Install activesync 4.2 from the CD (CD that came included w/unit).
-Uninstall activesync 4.2 (don't delete any drivers installed by the CD)
-Install activesync 4.5 (download it from Microsoft Website)
-Plug in your 8525 to the PC via USB cable, and your PC should NOW recognize it.
This is what I did and it helped. There may be a better/alternate way in doing this, but I FINALLY got Activesync to work!
Oh and see if you can help me with the prob. that I'm having.
http://forum.xda-developers.com/showthread.php?t=383065
Ya I can't find the CD that came with my phone for the life of me.
ok found disc and tried that. Nothing. Could my phone be broken?
heres what I had to do to get AS working again.
Delete the current version of AS from your PC
Go into c:/wondows/program files and delete the AS folder (Windows may not let you delete some DLL's.
Go into the registry and delete any AS entries you can find, or do what I did and use Ccleaner registry clean up program (Google it, it's freeware)
Restart the PC
Install AS 4.2 from the AT&T/Cingular disk.
Install AS 4.5 from MS.
Hook up your 8525 and all should be well.
Tried that....didn't work.
Still hoping someone has some advice. I've tried two different usb cables and used different ports as well so it's not that.
quick update...
I searched through the forums and googled a few things and from what I can tell other people have had this problem and not found any solution. I am considering trying bluetooth but I don't have bluetooth for my PC...can i get some sort of adapter? Also...Is there a specific driver I can download for the HTC hermes that might fix this issue?
Yea your situation sounds like the one I used to have.
Do you have a firewall?? If so DISABLE it. I have COMODO and even though I would press "accept", the drivers wouldn't install completely.
This is what I did:
-Start your PC.
-Uninstall Activesync through the Add/Remove.
-Delete the Microsoft Activesync folder in the Programs folder.
-Restart your PC
-Wait till your firewall loads up. Disable it.
-Go through the procedures I mentioned in my 1st post.
Oh and make sure you have internet access. I'm not 100% sure if internet access helps, but it could help with the drivers.
Even though I just got my 8525, I don't mind helping someone
tried that. no go. I think i'm going to just have to get a new phone.
Did you try disabling the Advanced Network Functionality?
START -> SETTINGS -> CONNECTIONS -> USBtoPC
Yes. when I do that it makes windows see my device, but windows does not know what my device is. Thats why I think some sort of driver might be missing, but I don't know how to fix that.
branden7 said:
Yes. when I do that it makes windows see my device, but windows does not know what my device is. Thats why I think some sort of driver might be missing, but I don't know how to fix that.
Click to expand...
Click to collapse
So... with the RNDIS checkbox UNCHECKED and your FIREWALL OFF, you get the USB Device not recognized error? In that case, ENABLE it and look at these other settings:
1. In the PPC open ActiveSync, then select Connections... from the menu and make sure the Synchroinize ALL PC's using this connection: USB option is checked.
2. In Windows (XP) check your ActiveSync connection settings (see image).
3. Did you try the AS 4.5 Connection Trouble Shooter?
4. You should also try another computer, just to double-check.
There is no driver to make AS work, AFAIK. Question: What happens when the RNDIS checkbox is enabled? Does Windows report an error or simply doesn't connect?
Tried all of those things, still device not recognized. I do need to try another computer but unfortunatly do not have access to one.
When i click that RNDIS checkbox nothing of interest happens. If it's clicked on when i connect windows very briefly see's the device (although it's not recongized) and then the little symbol for unknown device on my taskbar dissapears. If I then click it off windows will again see the device and the little symbol on my taskbar reappears, but it still doesn't recongnize the device.
Wow. That's a strange problem you have there. At this point, it could be a hardware issue. You could try installing WM5Storage or CardExport just to check if the USB hardware is working (bad cable?). Also, try checking your PPC registry, specifically, HKLM\Drivers\Usb\FunctionDrivers. It should look similar to mine (see pictures attached). I believe these keys tell Windows what to do with the device when connected thru USB. Other than that, try a flashing a new ROM from the SD Card, something like VP3G's which is known to work correctly.
Branden,
I have this problem from time to time. My solution is as follows: make sure the usb cable is connected to both the phone and the computer, even though you are getting the unrecognised error message.
Reboot the phone (soft reset) while still attached to the usb cable. Do not rush anything. Input any unlock passwords when prompted by the system but be aware that booting up can be slow, so give it time.
Once the phone has booted up you should then see activesync kick in. You may have to try this several times before it works but it always works for me.
One thing I would advise is to disable/deinstall any auto locking software, eg S2U2. These tend to kick in on long synchronisations and throw the usb status out.
Hope this helps.
WB
Hi! You didn't by any changeuse memmaid or something to clean up the notification queue? (if this sounds like gibberish, you probably didn't) Let me know!
branden7 said:
Tried all of those things, still device not recognized. I do need to try another computer but unfortunatly do not have access to one.
When i click that RNDIS checkbox nothing of interest happens. If it's clicked on when i connect windows very briefly see's the device (although it's not recongized) and then the little symbol for unknown device on my taskbar dissapears. If I then click it off windows will again see the device and the little symbol on my taskbar reappears, but it still doesn't recongnize the device.
Click to expand...
Click to collapse
Same Problem
Just to let you know your not alone ...
I am having the Exact same problem at the moment .... fortunately i do have access to another PC ... My Laptop connects to it with no problems what so ever .... so it obviously is a PC issue and not a Phone issue
I too have tried all the currently posted attempts at a solution to fix it but so far nothing has worked ... i am beggining to think that i may have to do a fresh intall of XP and that would Phiss me off
So any further suggestions would be doubley appreciated
Tried everything mentioned since my last post and still nothing. Also I am now getting the white screen issue again (Which I fixed originally by buying another hermes that had a crushed usb port and swapping the screens out). I think I may be about ready to move on to another phone as this is now my third major problem with this model of phone (although one of the problems may be an issue with XP).
I had the same problem. I updated my WM5 to WM6....and it stoped syncing with my computer. Went back to exchange it. Later, I learned it wasn't the problem with the phone syncing.....here's how you can fix the problem.
Click on Start>Settings>Connection Tab>USB to PC
Uncheck "Enable advanced network functionality"
Click on "ok"
I just upgraded to wm6 again and followed these steps....now it syns fine.
It worked for me.....hopefully it will work for you.
Peace
so i thought i'd give vista's "windows mobile device center" a try on my vista laptop, and wasn't surprised to find that i couldn't get it to recognize my phone. i was surprised to find that the xp computer that i've been using with activesync for a long time suddenly stopped recognizing my phone as well.
up to now i've hard reset phone (dcd 3.04, 3.37 radio) and reinstalled activesync 4.5. no dice. please if anyone can help me troubleshoot this thing i'd be way grateful. why has my phone stopped communicating with my computers?
For WM 6 devices, on Vista you must upgrade to Windows Mobile Device Center 6.1.
i downloaded and used 6.1 on my vista machine, but it didn't work. any other ideas? i think there may be something that changed on the phone, because now, activesync won't work either...
...bytheway, the phone will charge when plugged into either, but that's about it.
...bytheway, the phone will charge when plugged into either, but that's about it.
Click to expand...
Click to collapse
Just for ****s and giggles, have you tried the following:
1. Using a different usb port
2. Blowing the dust out of the port on the phone
3. Using the Y adapter that came with the phone in between the sync cable and the phone
First, plug into the USB, wait for the Windows new device chime, see if anything occurs in the WM Activesync.. If no Activesync connection is made (after the 'connecting' has stopped) then unplug and plug in back in another USB port. Do that at least 4 times (cycling between ports...even the same may eventually work) to see if you have a success.
Restart your PC, Soft-rest your phone and try again.
If still nothing, then don't bother plugging your phone in and then Run As An Administrator the attached batch file and then under View 'Show Hidden Devices.' You'll now see all devices that have ever been installed and retained for your OS, with the faded devices as those not currently attached/active.
Rather than the batch file you can open up a Command Promp Window with Administrator access (Start\Programs\Accessories\Right Click on Command Prompt and Run As An Administrator)
(I usually keep that batch file accessible in the root of my OS partition, just to keep it easy to clean out legacy device drivers that can cause problems.[/i])
Enter:
set devmgr_show_nonpresent_devices=1
start devmgmt.msc
Uninstall
Network adapters\Microsoft Windows Remote Adapter
Portable Devices\PocketPC
Then under Programs & Settings uninstall the Windows Mobile Device Center upgrade, and then reboot your PC. Reinstal that Device Center 6.1 update and then again connect your phone with the USB. (for the XP machine you can do all of the and unistall/reboot/reinstall the ActiveSync 4.5.
(note to self or another.....these steps to be added to the Wiki for ActiveSyn issues)
well, i'm thinking that the "****s and giggles" have it. i blew into the port, plugged her in, and it connected to my xp machine, just like days of old. after about 3 minutes though, the connection dropped, and i've not been able to get it going again since. i think this rules out any software/settings problem, and looks like it's a hardware issue. i'll try cleaning it one more time a little later, and if no go, i'll have to figure a way to re-flash the stock rom (i only have a 6gb card...) and send the beast back. thanx for the input, guys (specially keystone, dang man that was one badass post with some instructions that will help someone, i'm sure.)
Do you have the Y adapter that came with the phone? The one with the audio jack and the 5 pin mini usb on one end and the 11 pin mini usb on the other? The reason I ask is because for some reason HTC decided to put an 11 pin mini usb connector on our phones, yet supply us with a data cable that's standard 5 pin mini usb. If you have it, just humor me and try it and see if it keeps the connection.
Oh and P.S....the "****s and giggles" wasn't just a shot in the dark. I've solved many activesync problems for people before using all 3.
I actually hadn't used the cord without the Y-adapter untill today. both ways yeild the same result.
Another Activesync problem
I've been on vacation the last week and while away i had to do a clear storage..anyway, my phone was fine but when i connect thru activesync i get an error code : 85010014 and my contacts list doesnt get updated...:S can anyone out there give me some advice or do i hafto start from scratch?
Also is there a way to find my contacts on my comp?
jinx01 said:
so i thought i'd give vista's "windows mobile device center" a try on my vista laptop, and wasn't surprised to find that i couldn't get it to recognize my phone. i was surprised to find that the xp computer that i've been using with activesync for a long time suddenly stopped recognizing my phone as well.
up to now i've hard reset phone (dcd 3.04, 3.37 radio) and reinstalled activesync 4.5. no dice. please if anyone can help me troubleshoot this thing i'd be way grateful. why has my phone stopped communicating with my computers?
Click to expand...
Click to collapse
Well the hoop jumping is fun and all but I think if you uncheck the "Enabe advanced network functionality" in Start > Settings > Connection > USB to PC it may help.
Damn! That was simple. I unchecked the "Enabe advanced network functionality" box and I'm up and running! I'll save the hoops for later. Thanks!
treeboy said:
Well the hoop jumping is fun and all but I think if you uncheck the "Enabe advanced network functionality" in Start > Settings > Connection > USB to PC it may help.
Click to expand...
Click to collapse
This is the fix almost 90% of the time......
treeboy said:
Well the hoop jumping is fun and all but I think if you uncheck the "Enabe advanced network functionality" in Start > Settings > Connection > USB to PC it may help.
Click to expand...
Click to collapse
Worked for me. Thanks!
ok ive tried all except the hidden devices thing (gonna try it now) and no go will post if it works oh im on DCD's 3.2.6 rom and the 6.1 of device center and i dont think it has anything to do with it but i just installed 2007 outlook
treeboy said:
Well the hoop jumping is fun and all but I think if you uncheck the "Enabe advanced network functionality" in Start > Settings > Connection > USB to PC it may help.
Click to expand...
Click to collapse
Hi, thanks that work for me fine too
my mogul has been giving me crap with vista and xp for weeks. Nothing can solve it. I've re-flashed, downgraded, used different ports, different cables, modified the USB to PC settings.
Add this to the list of things that randomly seem to be a problem for this phone.
I had a similar situation, none of the software based suggestions fixed it. Wiggling the cord around would sometimes connect, but soon thereafter, my phone stopped charging. The USB port was the culprit, so be careful.
I'm sure everyone who was having troubles figured out solutions, just thought I'd add in my dealings with this.
I just had the phone activated today (yes I bought used) and brought it to work to sync with my work outlook, well the usb cord would charge the phone but give me nothing but errors in the way of actual data connection. I was a little bummed this afternoon thinking I bought a partially broken phone. But WHILE HAVING THE PHONE CONNECTED ( I bold because I had done this multiple times while not connected and had no results) I opened the Comm Manager and clicked on the sync button at the bottom, suddenly my computer could recognize my device and I was sync'ing like a mad man.
Very possibly a stupid thing I should have done from the start, but I don't know any better since I'm brand new to all of this. I only post in hopes of helping another bummed out soul as was myself
I an running a HTC TyTN-II 4550 phone (WinMo 6.1) on a desktop PC (WinXP).
I couldn't get Activesync 4.5 to work either, but there were obvious reasons--my version of Office 2000 isn't supported (2003 is the earliest, I think) and IE and Outlook are not set as my default mail clients (-and that's how I like it-).
I didn't really need Activesync but I did want to be able to get files on and off the phone from my desktop PC through the USB cable. When I'd connect the phone, Activesync would automatically start up and spin the little logo for a while and then say "connection couldn't be made" and then I couldn't do anything--even move files on and off the phone.
What I found works is this:
1) open the Task Manager, and kill the wcescomm.exe process.
2) navigate to the folder that Activesync is installed in, and run the file named WCESMgr.exe.
3) that will popup a window, asking if you want to sync, or cancel. Press [cancel]
4) the normal Activesync window will come up, and the choices for "Sync" and "Schedule" will be greyed out, but the "Explore" button should work.
Sometimes I can disconnect and reconnect the phone without going through steps #1-#4, but not always.
With the "Explore" window you can drag files on and off the device.
I tried dragging small Word and Excel docs on and off; both converted properly when dragged onto the phone, but only the Word file would convert again when dragged off.
The phone will access the internet through the USB when hooked up this way, also.
Hello
When I connect my hd2 to the pc throught the USB cable, the message on hd2 shows up to click sync but my computer can't see the hd2.
I went to device manager but it doesn't show up.
it worked 2 day ago, I even tryed at another PC.
I can recharge the phone from my computer...
deadmau said:
Hello
When I connect my hd2 to the pc throught the USB cable, the message on hd2 shows up to click sync but my computer can't see the hd2.
I went to device manager but it doesn't show up.
it worked 2 day ago, I even tryed at another PC.
I can recharge the phone from my computer...
Click to expand...
Click to collapse
Firstly, what operating system are you using on your PC?
Secondly, have you tried deleting the sync partnership on both your phone and the PC and recreating it?
Thirdly, try and connect your phone directly to the USB root hub on your PC and not via a hub.
The fact that the HD2 is identifying the physical connection suggest the problem may lie at the PC end. Recreating the sync partnership is probably all that's needed.
Hello
If you are using Vista or Win7 you need to download Microsoft Mobile Device Manager to get a successful connection. Once you download this and install all will be good.
There is an option (can´t remember where) where you can disable fast link for ActiveSync.
This fast option has created me a lot of problem.
i'm using win7, i reinstalled the mobile device.
If i disable enable faster data sync then I can sync the phone with the computer but if I enable faster data sync then the 3G band auto enables...
I have just in the last weekend somehow lost the ability to connect to any computer. I have an activesync connection with work and a connection via hsdpa to the server too, and then one via wmdc on my vista home computer.
All has been going swimmingly until the weekend when I noticed that it had stopped synching new appointments.
The computers (both) now no longer even detect the phone, although it does charge via the usb cables.
The settings are still set to sync on the phone (as opposed to say disk drive).
I've tried a bunch of things, and now annoyingly, have hard reset the phone, but no joy!! Now I have the joy of setting everything back up again... But still no synchronising with the computer.
Any thoughts would be greatly appreciated.
bcorgan said:
I have just in the last weekend somehow lost the ability to connect to any computer. I have an activesync connection with work and a connection via hsdpa to the server too, and then one via wmdc on my vista home computer.
All has been going swimmingly until the weekend when I noticed that it had stopped synching new appointments.
The computers (both) now no longer even detect the phone, although it does charge via the usb cables.
The settings are still set to sync on the phone (as opposed to say disk drive).
I've tried a bunch of things, and now annoyingly, have hard reset the phone, but no joy!! Now I have the joy of setting everything back up again... But still no synchronising with the computer.
Any thoughts would be greatly appreciated.
Click to expand...
Click to collapse
Did you reboot the PC? I occassionaly have problems with activesync stopping working suddenly. It doesn't really like being unplugged sometimes and get's a bit ansy about it. I've found that sometimes a soft reset of the phone does it, but sometimes I need to reboot the PC.
I hope you did try rebooting the PC before you did a hard reset. At least you wouldn't have wasted your time with having to set up your phone again!
Yes did indeed! Restarted both. But the fact that it's affecting 2 computers suggests to me that it's something wrong with the phone, and not computers themselves.
HTC haven't been any help as yet - just haven't responded to my requests.
bcorgan said:
Yes did indeed! Restarted both. But the fact that it's affecting 2 computers suggests to me that it's something wrong with the phone, and not computers themselves.
HTC haven't been any help as yet - just haven't responded to my requests.
Click to expand...
Click to collapse
The fact that it still doesn't work after a hard reset leaves me at a loss!
You're telling me!
Before anyone asks also, I've tried different cables and different usb ports on both computers too.
Any other thoughts out there? I'm starting to think now it's something inside the phone - i.e. the usb port?
Fixed for me!
After having sent off the phone to HTC, it was repaired in 8 days and that was sending it to and from Sweden to the UK!
Turns out the usb connector in the phone itself was not working. 10/10 for HTC repair service!
If you use the XPP OS.
You must select ‘To enable faster data synchronization’ (i dont konw how to translated that, sorry my English.) under the ActiveSyuc.
If you use the Vista OS.
You dont select this option otherwise you cannt connect you phone to computer.
me too,..i can't connect with my pc... my computer show me found new hardware & need 2 install driver,...tell me what kind of driver need...? thank!!!
me too,..i can't connect with my pc... my computer show me found new hardware & need 2 install driver,...tell me what kind of driver need...? thank!!!
Click to expand...
Click to collapse
Microsoft Corporation - Other hardware - PocketPC USB Sync
Download size: 11.1 MB
You may need to restart your computer for this update to take effect.
Update type: Recommended
Microsoft Corporation Other hardware software update released in May, 2007
At present, I'm confering with Microsoft about the issue I'm having with my Vista laptop. It finds the correct driver with windows update, but the driver fails to install even with a clean boot.... they're working on it...
deadmau said:
Hello
When I connect my hd2 to the pc throught the USB cable, the message on hd2 shows up to click sync but my computer can't see the hd2.
I went to device manager but it doesn't show up.
it worked 2 day ago, I even tryed at another PC.
I can recharge the phone from my computer...
Click to expand...
Click to collapse
I had the same problem and 'solved' it by trying every other USB port, and (of course) the last one did it correctly.
bcorgan said:
You're telling me!
Before anyone asks also, I've tried different cables and different usb ports on both computers too.
Click to expand...
Click to collapse
To make Active Sync work
Turn off Setup\other\USB to PC\ActiveSync Enable Faster Data Synchronization
The all will be ok
SOLVED!! Joy, joy, happiness glow... . I removed AVG 9.0, restarted, reinstalled WMDC and the driver (all of which installed automatically when I plugged my HD2 in to the USB port), and reinstalled AVG 9.0 and… Voila, MAGIC! I had AVG configuered correctly to allow WMDC to make connections and pass through the antivirus, but I still had to uninstall it to get the driver to install. Sometimes antiviruses are stubborn!
hi i had the same problem try this go to settings on your phone all settings connections usb to pc and uncheck the fast sync box if that dont work theirs an option that is somewhere on your pc where you can choose the pc to search for an update driver for that device
marquez2010 said:
hi i had the same problem try this go to settings on your phone all settings connections usb to pc and uncheck the fast sync box if that dont work theirs an option that is somewhere on your pc where you can choose the pc to search for an update driver for that device
Click to expand...
Click to collapse
I tried BOTH of those options prior to uninstalling AVG and no joy. Bytheway, I've switched to Microsoft Security Essentials and still have to uninstall MSE everytime I flash my HD2! UGH!