MMS problems -how to debug? - Touch Diamond2, Pure General

Ok.. The problem is that I can't send mms's with almost all ROMs.. And with a few it works -its not stable and the message size must be below 50k (with my carrier, [email protected], it is possible to send/receive atleast 300k messages). My HSPA internet works just fine and SMS's work fine but no go on MMS.
Ive tried many Cheetahs, Natalys and currently am on Duttys 7.1 WWE multilingual that has no working MMS. I install the roms from SD and do a hard reset after that. I've tried auto connection setup and setupping MMS server and modem manually but no go (I even tried different wap profile and port since they give different port to windows mobile devices).
So is there a program that intercepts MMS traffic or is there a log that MMS system writes when it fails.. Or should I suspect that there is something wrong at carrier side?

Related

updated rom all is OK apart from MMS wont send!

I have updated the tmobile rom using the K-JAM_WWE_216901_2169101_020710_ship.exe rom. Everything seems ok apart from the fact that i can send mms messages
I am using the setup for tmobile connections and the internet works fine. When i click send for mms it automatically states that unable to send your messages your message will remain in the outbox!
any ideas?? Thanks in advance
you need to setup mms configuration, search for MMS settings.
sorry i dont know the settings but they are available on the forum.
good luck
R
rob thanks for the reply.
i have setup mms configuration with the following:-
server name: T-Mobile MMSC
Gateway: 149.254.211.10
port number: 9201
server address: http://mmsc.t-mobile.co.uk/
connects via: My Work Network
sending size limitation: 100k
WAP version: WAP 1.2
still not working, dowsnt even seem to attempt to connect automatically comes up with the unable to message!!!
You dont say your location but my uk settings are
Server name: T-Mobile UK
Gateway: 149.254.201.135
Port No: 8080
Server address:http://mmsc.t-mobile.co.uk:8002/
Connect via: T-Mobile Internet
Sending size: 100k
Wap version: 2.0
They are the bog standard settings preloaded
Hope this helps
i'm on O2 paygo and have to use the wap network to get my mms to work, this maybe different for tmobile.
there may be some cab files on the ftp to help get the settings working.
i've just upgraded my rom so need to do this myself but for O2.
good luck if you find a solution please post it to help other tmob users
regards
Rob
guys many thanks for your advice, checked my settings and it appears i had location work nettwork selected - i think this may have been installed from the tmobile cab settings - i changed that to the internet and now i can receive mms - havent tested send yet but assume it will be ok!
JPHCCFC said:
I am using the setup for tmobile connections and the internet works fine. When i click send for mms it automatically states that unable to send your messages your message will remain in the outbox!
Click to expand...
Click to collapse
i've had same problem few days ago, despite i didn't change anything ins MMS settings. i've had to reenter and confirm the same settings again and it just started work fine.
glad u got it sorted :wink:
I can again no longer send mms. I have reverted to a previous backup i had and can no longer send mms. I checked all my settings and they were as above - the settings that worked previously - I have definately got The Internet selected for connecttion. I have also tried demoniks settings for tmobile and stil no joy! the strange thing is i can receive messages just cant send any! Any ideas woudl be greatly appreciated!
may not be relevant but a recent Atom ROM upgrade messed up MMS sending but only
if you insert the contact, if you manually type the number to send to it works.
cheers mate for the response. I tried that but i still get the unable to send error! This is the most buggy phone i have ever had! It is a really good phone but appears to have so many issues!! Its a full time job trying to get fixes for it! I have three issues at present:-
1) No sound when SMS is received
2) Wont turn on at certain times
3) MMS wont send
does anyone have a handset anda build with no bugs?????

Reciving MMS while on ActiveSync PROBLEM

Hi,
I believe the image from factory supported this (i'm 99% sure) but all new images i've tried does not, i'm not sure where the problem lies though.
Has anyone tried this?
Afaik, an MMS is basically a WAP link sent through SMS, which will then be downloaded over GPRS - but as this is over internet it might as well be done over the ActiveSync internet connection instead ?
Please tell me there's a tweak to make this work, as i work with MMS and WAP, and like to view the screen of my phone on desktop (through AS) for display on projector for demonstration.

ArcSoft MMS Composer issues on the Qtek 8500, 9100 and HTC TyTN

Has anyone experienced problems with the ArcSoft MMS composer software not being able to process the image sent to the device when set to WAP version 2.0. and displaying unable to send from the device when set to WAP version 1.2? I believe it is a software version issue with the ArcSoft MMS composer software. Any version older then 3.2 seems to have various send or receive issues. I recently updated my rom on the HTC TyTN and the new version of the mms composer works just fine (MMS Composer Version 3.2.0.15)
I have worked with my WAP/MMSC provider to capture packets at the gateway and we are seeing a NACK message being sent from the handset prior to loosing the session. The mms receive log (when set to WAP version 2.0) ends with a Receive result: 413. What does this mean?!
Would it be possible to update the AcrSoft MMS composer within the ext rom on these devices to a version equal to 3.2.0.15 or higher?
Please help!
Problem with MMS Composer
JSarg said:
Has anyone experienced problems with the ArcSoft MMS composer software not being able to process the image sent to the device when set to WAP version 2.0. and displaying unable to send from the device when set to WAP version 1.2? I believe it is a software version issue with the ArcSoft MMS composer software. Any version older then 3.2 seems to have various send or receive issues. I recently updated my rom on the HTC TyTN and the new version of the mms composer works just fine (MMS Composer Version 3.2.0.15)
I have worked with my WAP/MMSC provider to capture packets at the gateway and we are seeing a NACK message being sent from the handset prior to loosing the session. The mms receive log (when set to WAP version 2.0) ends with a Receive result: 413. What does this mean?!
Would it be possible to update the AcrSoft MMS composer within the ext rom on these devices to a version equal to 3.2.0.15 or higher?
Please help!
Click to expand...
Click to collapse
I work with many different brands of HTC and ofcourse there is a lot of problems with MMS. 95% of the cases it is due to wrong configuration. The last 5% it is either memory, previously installed 3rd party software, loosing MMS Config. under Messasing, loosing MMS cathegory, etc. but nothing that couldn't be fixed.

MMS Not Working

Hello, sorry if I am double posting. After 3 years of WM 2003 I went for it. Helmi - thank you - Xplode, thank you.
My Blue Angel is almost perfect. MMS does not work though. Every time I hit send/receive I get an "Error Synchronising" It does not even try to connect to the GPRS connection I tell it to. I have tried with your original ROM and cabs and also with Xplode's cabs - How do I install an xml file anyway?
I have searched XDA, Google Blah Blah, no luck.
Thanks for listening,
Los.
you need to install the 2 MMS files inside the cabs2.rar from The original WM6 release thread.
Then you'll need to setup your MMS and GPRS server settings.
Ive tried installing ArcsoftMMS and MMSenabled cabs but still not working.. and i installed a network wizard for my network configurations but still cant send..
MMS
Yep - mine seems to have a problem that even though I tell it to use my GPRS connection in the settings, MMS does not fire up the connection when I do a send/receive.
MS
Hi - got it to connect to the GPRS and it says "Sending" but it does not send (stays in the outbox). I also receive notifications that I have an MMS message but I cannot receive it.
Any ideas - I have gone through the settings with my provider and they appear correct?

Cant get MMS on 8525, TNT.19199

for some reason my MMS will no longer receive messages at all... I have no idea why and its not due to any changes I made because I didn't make any. I used the auto connection config on WM6.1, for ATT and USA, and my internet works fine, I can receive e-mails and send them (only after removing the proxy), but all that works, I can send SMS and receive those no issues but I just cant do MMS, or I cant receive them. Not sure if I can send them or not I haven't tested that.
Connection settings are wap.cingular user id [email protected] pass CINGULAR1 configured for that being the internet connection...
MMS settings
gateway:
wireless.cingular.com
port:
80
server address:
http://mmsc.cingular.com
connect via:
MEdia Net
send limit:
100k
WAP version:
WAP 2.0
Retrieval mode set for auto, attempts is 3, and reject msgs is NOT checked off...
Any input?
Any time I go to an ATT or Cingular store they are always dumbfounded and don't know what to do since I have a 8525 with a non cingular ROM, and WM6.1 instead of 5.
Same here
I have the same issue...
Look for Arcsoft cab file. Run it then run the network wizard again...
MMS Works Now...
Yeah, uninstall Arcsoft MMS program from your phone, do a soft reset, re-install it on your phone, do a soft reset, run the connection wizard, do a soft reset. That finally worked for me.
so the new 5.x version of mms arcsoft doesnt work with MMS's? Either way I went with a more blan ROM for the meantime, and I just ordered a 8925 so I wont be worrying about this anymore.
I have many many many
Many Arcsoft MMS Composers has diferent kind of things the 4.2.8.1 works in a separated folder for sms and the newer 5.0.70 works inside of the SMS folder so... try wahtever the 5.0.70 supports 399K and dont have WAP type (1.2 or 2.0)
Enter to this site
http://winmodevelopers.freeforums.org/portal.php
go to software for all link and download the arcsoft and mms enable cabs

Categories

Resources