Database Users

T-Mobile US settings for EZ WAP 2.5

OK, I'm a pretty technical guy and I'm still stumped. I've tried entering the T-Mobile provided info into EZ WAP but am obviously not mapping their connection settings info to the right fields in EZ WAP. AFter a couple of hours of tinkering and several searches here I'm caving in and asking for help.
Can somone post the "play by play" EZ WAP setup for T-Mo US?

Mad Max said:
I've tried entering the T-Mobile provided info into EZ WAP
Click to expand...
Click to collapse
what info did they give you?... When i calld, they gave me the run-around...plus I tried to ask them why I can't connect threw "internet2.voicetream.com"... & they sound like they gettin mad @ me, an start askin why I need to know all this...
...TMO needs an attitude adjustment

Unfortunately, I agree that the carrier's data specialists are often little or no help. Every question you ask, it turns out that they either:
a. Don't know
b. Pretend to know and give you the wrong answer
c. Assume you're with the Taliban and are trying to break in to their WAP system to threaten civilization
I got the T-Mo official settings at:
http://www.t-mobile.com/help/services/tz/configother.asp
and they are echoed at:
http://www.theody.com/t-mobile.html
Again, the info on these pages doesn't map directly into the connection settings on the PPC or to the settings in EZ WAP. I tries a few intuitive mappings and failed.

Mad Max said:
OK, I'm a pretty technical guy and I'm still stumped. I've tried entering the T-Mobile provided info into EZ WAP but am obviously not mapping their connection settings info to the right fields in EZ WAP. AFter a couple of hours of tinkering and several searches here I'm caving in and asking for help.
Can somone post the "play by play" EZ WAP setup for T-Mo US?
Click to expand...
Click to collapse
Ok here you go!
#1) Create a new connection with wap.voicestream.com as the APN
#2) EXWap settings:
General Tab:
Connection - WAP
Connect Automatically - Checked
Home Page - wap.myvoicestream.com
Connection Tab:
Connection tyoe - Gateway
Address - 216.155.165.050
Port - 9200
Connectionless gateway - Unchecked
WTLS secured connection - Unchecked
Push Tab:
Enable Puch - Checked
Connection Type:
Address - 216.155.175.050
Port - 2948
Connectionless push gateway - Checked
WTLS secured connection - Unchecked
MMS Tab:
Message Server - http://216.155.174.84/servlets/mms
Sender Address Type: Phone Number
Sender Address - +1(10 digit mobile number)
MMS Option:
Message Expiry: Max
Delivery Report - Checked
Read report - Checked
Hide Sender - Unchecked
HTH

Qman... I LOVE U!
you have noooo idea how many times u solved My xda problems hehehehe

ntabikha said:
Qman... I LOVE U!
you have noooo idea how many times u solved My xda problems hehehehe
Click to expand...
Click to collapse
Hey thats what its all about, Users helping Users and spreading the Love!
:wink:

Qman said:
Ok here you go!
Click to expand...
Click to collapse
Qman, you indeed are the eggman, you are the walrus, you are the eggman, koo-koo-kachoo. (Is that the xda-developers accepted spelling of koo-koo-kachoo?) :^)
I was pulling my hair out on this and have never found any of these settings you spelled out here or on any T-Mo site. It took a few minutes for you to type all that in and I appreciate it.
I was live on T-Zones about 5 minutes after I saw your reply, working perfectly.
Interesting observation, maybe it's an error on my part... I tried your settings in EZ WAP, but connecting through my usual internet2.xxx and the T-Zones stuff wouldn't come up. Other wap sites in EZ WAP would, like yahoo, but not T-Zones. I created a connection called WAP (like you used in your example) and made the APN wap.xxx and it works fine, AND nPOP pulled my mail through it to.
So I'm curious if these statements are true:
1. You can pull WAP and http/smtp through internet2.voicestream.com, but not necessarily T-Mobile's proprietary T-Zones WAP.
2. You can pull WAP, http/smtp, and T-Zones through wap.voicestream.com
If these are true, then I assume that wap.xxx and internet2.xxx are functionaly the same except that wap.xxx gateway has the t-zones subscriber authentication built into it, rather than on the content server.
Since my GPRS connection is always on, I don't want to have to switch connections between wap and nPOP/web sessions, would prefer to stay with one.

@Mad Max
I'm pretty sure your assumption abut that wap.xxx and internet2.xxx functionally are correct and thats why the wap.voicestream AP is my all around AP of choice (its my main T-Mobile AP).
FYI before upgrading to WM2003 the wap AP was also the only AP that would work with Pocket Hotmail 2.0, which now doen't work at all under WM2003. :evil:
Anyhow have fun!

anyone got the ATTWS Settings for this?

MMS and Tmobile US with XDA II
I finally received my XDA II this afternoon.. I have spent most of my afternoon trying to fix this MMS thing. I have used the base software, added EZWap 2.5... Tried every configuration.. Call the useless bozos on Tmobile but couldnt get this darn MMS thing to work...
Can someone please answer my 2 questions
1) What settings do you need with TMO?
2) What plans do you need with TMO?
19.99 All internet + 2.99 + 4.99 etc
Thanks

my MMS works fine, on 2002.
and though i have the internet from tmobile ($19)
goin about it via the wap.voicestream.com works just as good
for browsing net, and using tzones, and mms ofcourse.
the only drawback i hear, is you cant use secure servers on wap.
although i've checked my INBOX several times via wap, and it worked just fine for me.
check your settings from Qman again.
you maybe one digit off.
good luck.
ps: after you set it, if you want to test the mms, give me a buzz.

Hmm...
It is interesting, in my case the Pocket Internet Explorer works.. MMS doesnt and the EZWAP doesnt work...
It is bizzare... I have checked and rechecked each setup as provided by QMAN twice.. Had another person verify it for me...

Re: Hmm...
ratnamg said:
It is interesting, in my case the Pocket Internet Explorer works.. MMS doesnt and the EZWAP doesnt work...
Click to expand...
Click to collapse
If you're sure that the settings are OK, my next suspect would be an account setting issue. Unfortunately, getting help from the carriers in debugging that could be pretty tough.

more
more on the Xda ii. I am posting this message from the XDA. I still cannot send or receive MMS. I had a friend of mine send me a MMS and he got a error message that my phone cannot receive MMS and that a text message would be sent.
I received a notification about the MMS but couldn't retrieve it.
any suggestions

Finally got it working
Finally got it working... There was a MMS Server setting on the network that was missing and took me 18 calls and 95 minutes on the phone with TMobile to get it right.
I can now receive and send MMS to myself.. Looks like the MMS in TMO US is limited to TMO US customers only. I can only send MMS to other TMO US customers.

Re: Finally got it working
ratnamg said:
Finally got it working... There was a MMS Server setting on the network that was missing and took me 18 calls and 95 minutes on the phone with TMobile to get it right.
I can now receive and send MMS to myself.. Looks like the MMS in TMO US is limited to TMO US customers only. I can only send MMS to other TMO US customers.
Click to expand...
Click to collapse
What was the MMS server name? I'm in Austin, TX, just got a iMate XDA II and can't get my MMS working either.
Do you have to have a plan for MMS? I have the $20 internet already.
What parameters settings do you need in MMS Composer?
What parameter setting do you need in My ISP connection?
Thanks so much,
Craig

Re: Finally got it working
cshields1 said:
ratnamg said:
Finally got it working... There was a MMS Server setting on the network that was missing and took me 18 calls and 95 minutes on the phone with TMobile to get it right.
I can now receive and send MMS to myself.. Looks like the MMS in TMO US is limited to TMO US customers only. I can only send MMS to other TMO US customers.
Click to expand...
Click to collapse
What was the MMS server name? I'm in Austin, TX, just got a iMate XDA II and can't get my MMS working either.
Do you have to have a plan for MMS? I have the $20 internet already.
What parameters settings do you need in MMS Composer?
What parameter setting do you need in My ISP connection?
Thanks so much,
Craig
Click to expand...
Click to collapse
I have the unlimited MMS for 4.99 you will need that to send MMS. My MMS settings are all the same. I also have the unlimited WAP for 2.99 and I use the wap.voicestream.net for MMS...

MMS
I talked with T-Mobile. Since I already had the internet access service, T-Zones is already enabled. They said all I need for MMS is T-Zones. I set the right server, ip, etc. I could never receive a MMS picture message to myself. All that came through was the text portion witha download link to tap. Tapping it just brought another text header message. TMO was no help either. Afterwards, ALL my alerts (weather, sticks) started coming to my MMS but I couldn't read anything. I finally had to call TMO to have them remove my phone # off the wap server for t-zones to stop MMS and resume SMS messaging.
Any thoughts on this chain of events?

mms config telfort
got an xda1 with a custom rom, offcourse is there no autoconfig, i can't find the settings for mms in holland (telfort)

you need to install EzWAP 2.5 or its equivilant.
that will add MMS to xda1
good luck.

Possibly working MMS on Magneto

Hey all,
i have found a new mms program that is currently in beta testing that seems to work so far in wm05. the address is http://electricpocket.com/products/pixermms.html you can find the download there near the bottom, the correct one is where it mentions xda.
i however am unable to test send/receive features because i cant work out how to set up gprs/wap in magneto some help with this would be appreciated.

THNAKS IVANT .. yes CONFIRMED PIXER can send MMS using MAGNETO .. but i cant receive an MMS (need to confirm yet) .. at least this is a good start .. .. thanks again..
PS dont use local number coding instead use international Number coding
example
09173xxxxxx4 <- local
+639173xxxxx4 <-international
if you cant connect to GPRS you need to connect manually
(Start->Settings->Connections tab->Advanced Tab->Select Networks Button->Edit Button->Tap and Hold the Modem Connections then connect)
try any of this three cab see which one will work for you

MMS
I wasn't able to get this to work. Stayed stuck on "0% Connecting" even when my GPRS connection was established prior. Funnily enough, if i DIDN'T establish the GPRS connection manually then it said "Authentication OK" even though it wasn't connected to anything! Then it would just hang.
I have to soft-reset to get out of it as "Cancel" does not work.
Using:
WM2005 1.50g
Radio 1.17
i-mate PocketPC
Vodafone NZ
I have not had any joy with MMS Composor 2.0.0.20 for Magneto either (hence why I'm trying this). I am about to install EzWAP 2.5 and try that again. Had some issues with it though, will try again. MMS is just handy to have. You wonder what messages you're missing out on without it

toenailed said:
THNAKS IVANT .. yes CONFIRMED PIXER can send MMS using MAGNETO .. but i cant receive an MMS (need to confirm yet) .. at least this is a good start .. .. thanks again..
PS dont use local number coding instead use international Number coding
example
09173xxxxxx4 <- local
+639173xxxxx4 <-international
if you cant connect to GPRS you need to connect manually
(Start->Settings->Connections tab->Advanced Tab->Select Networks Button->Edit Button->Tap and Hold the Modem Connections then connect)
Click to expand...
Click to collapse
Toenailed,
Does this use the Smart/Globe MMS Settings or the Smart/Globe Internet(GPRS) Settings from the Autoconfig app?
Thanks

Sending is work perfectly, but the receive...

pixar 4
hello to all
i have allready tryed that prog and it keeps saying that the messege was reject for unknon reason and to check my card for mms etc
card as mms enable
it says that allways the diference now is the international nunber format now it says 10% 20% to 100% them it gives me the error
i manualy conect but no luck
so i get Messagw rejected- no reason given
wap service unavailable
Please check with you operator ....etc etc
help needed
thanks

toenailed said:
THNAKS IVANT .. yes CONFIRMED PIXER can send MMS using MAGNETO .. but i cant receive an MMS (need to confirm yet) .. at least this is a good start .. .. thanks again..
PS dont use local number coding instead use international Number coding
example
09173xxxxxx4 <- local
+639173xxxxx4 <-international
if you cant connect to GPRS you need to connect manually
(Start->Settings->Connections tab->Advanced Tab->Select Networks Button->Edit Button->Tap and Hold the Modem Connections then connect)
Click to expand...
Click to collapse
Toe,
Could you post your settings for Pixer4?
My settings are below and I cant seem to send nor receive..
Thanks..

hi jenellej.. just run the GPRS cab ..
under in Service use Globe MMS Settings or Smart MMS Settings or Sun MMS Settings
for sun
"Gateway"="202.138.159.78"
"MMS URL"="http://mmscenter.suncellular.com.ph"
for GLobe
"MMS URL"="http://192.40.100.22:10021/mmsc"
"Gateway"="192.40.100.20"
for Smart
"MMS URL"="http://10.102.61.238:8002"
"Gateway"="10.102.61.46"
i already try the GLOBE and SUN .. but i havent try it with SMART yet
one last thing .. during sending .. the connectivity will not popup that it is connecting to GPRS .. but Pixer4 will say it connects .. suprisingly it does send without the GPRS Connecting notification appeared .. so its normal that you though it doesnt established a connection but in fact it does ..
PS Dont install also ArcSoft MMS COmposer

I manually configured my connection settings. But there should be no problem using toenailed cab. I used to have problems, maybe because it causes conflict with Arcsoft MMS. I uninstalled it, then it worked!

still doenst work
can ´t get it ti work in vodafone.pt i have tryed every possible combination and still get the message rejected for unknown reason
i will not give up lol
gateway 213.30.27.63
url http://mms/servlets/mms
port 9201

After sending--- device Hang
Hi, after I send the MMS using Pixer, the device just freeze. Any help? I'm using manual configuration for DiGi Malaysia.

Re: After sending--- device Hang
muhelen said:
Hi, after I send the MMS using Pixer, the device just freeze. Any help? I'm using manual configuration for DiGi Malaysia.
Click to expand...
Click to collapse
it takes time for it to send. just wait for it. it will seem it hanged but in fact it isn't. it takes time on "authenticated-ok" but after a while, it goes on smoothly.

for SMART (philippines):
here's the settings for Pixer..
Start/Settings/Connections/Connections
Click Advanced Tab, choose Select Networks
Under "Programs that automatically connect to the Internet should connect using:", click new.
Under General Tab:
Enter a name for these settings: Smart MMS
Under Modem Tab:
Tap new, enter a name for the connection, select "Cellular line (GPRS)" then tap next.
Access point name: mms
Click Next then Finish.
NOw open Pixer4.
Tap Options/Preferences/Advanced.
Wap Gateway IP Address:
10.102.61.46
MMS URL:
http://10.102.61.238:8002
Service:
Smart MMS
Click OK, check "Get Message Immediately" then OK.
for GLOBE and SUN settings, refer to toenailed's post above.
i was working on a cab with toenailed's help (thanks toe!!!), but i still can't get it to work. maybe later i'll figure it out when i'm not too busy. :wink:

I can send using Pixer4 on the Orange network. Not sure about receiving yet.
My Pixer4 settings:
Wap Gateway IP Address:
192.168.224.10
MMS URL:
http://mms.orange.co.uk
Service:
Orange MMS

works perfectly on sending MMS message (Etisalat) Operator & 1.5 WM but recieving is not working even when retrieve option is ticked, but that could be because of the workarounds am doing with MMS composer, am trying to replace the pop3 account in my inbox with MMS composer but no success so far :shock:

How abaut EzWAP MMS
i'm not try it yet but i thought it work.... :roll:

Re: After sending--- device Hang
mariolouis said:
muhelen said:
Hi, after I send the MMS using Pixer, the device just freeze. Any help? I'm using manual configuration for DiGi Malaysia.
Click to expand...
Click to collapse
it takes time for it to send. just wait for it. it will seem it hanged but in fact it isn't. it takes time on "authenticated-ok" but after a while, it goes on smoothly.
Click to expand...
Click to collapse
mariolouis, thanks for the explanation. It's really take time to send. Infact, I'm waiting more than 10 minutes, but still the same!

try this MMS Composser
this two cab must instaled

Re: try this MMS Composser
mwilmar said:
this two cab must instaled
Click to expand...
Click to collapse
Are these files the same ones with WM2003SE(Arcsoft?)? Or is the MMS Composer also Pixer?

Re: try this MMS Composser
jenellej said:
mwilmar said:
this two cab must instaled
Click to expand...
Click to collapse
Are these files the same ones with WM2003SE(Arcsoft?)? Or is the MMS Composer also Pixer?
Click to expand...
Click to collapse
Arcsoft MMS Composer 1.6

Problems with new T-Mobile (UK) Rom

Anyone else having any?
Mine so far are:
People can't phone me (they say that the no comes back as out of service?)
I can't phone people
Voicemail msgs come through an hour (minimum) after they've been left
Can't send text msgs to any number but, can reply when someone sends me one?!
Can't send mms msgs at all (settings are correct)
All of which is becoming very annoying due to my "phones" inability to be a phone - Anyway is anyone else experiencing the above problems, or know of any fixes.
Thanks in advance

I am also running the new T-Mobile rom and have none of the problems you have...

T-mobile UK - AKU
I'm running their latest rom and it is a great improvement over their last rom.
I'm having no such problems.
Charlie Grillo

no problemns here either

I had the SAME problems when I upgraded to the T-Mobile NL ROM.
No one replied when I asked for configuration details :evil: :evil:
..but I can tell you that it is very simple. You will have to correctly configure all of your service settings such as Voice Mail & Text Service Centers (Settings > Phone > Services, Click "Get Settings" and change them to the proper service numbers).
That is all.
I ended up having to call Cingular to ask them for the numbers :roll:
It appears that apparently, the latest T-Mobile ROMs did not provide plug-n-play type auto-configuration which all of the other ROMs I have tried provided.

Had problems with the T-Mobile NL ROM. Would only receive absolutely tiny pictures on MMS. Pictures of any descent size got a message that the phone wasnt capable of receiving them. Went back to the corporate install of the latest O2 ROM.

The phone problem is "less intermittent" but the voicemail problem is still there :x
As for the MMS I'm about to throw the poxy thing - have tried various different websites (and T-Mobile) but to no avail
Have currently got MMS configured as:
Server Name: T-Mobile UK
Gateway: 149.254.201.132
Port Number: 8080
Server address: http://mmsc.t-mobile.co.uk:8002
Connect Via: T-Mobile Internet
Wap Version: WAP 2.0
Can anyone kindly post up their settings (that work)
thanks

my gateway is 149.254.201.135
i've been having problems where it takes loads of attempts before finally downloading the message.

pjam said:
my gateway is 149.254.201.135
i've been having problems where it takes loads of attempts before finally downloading the message.
Click to expand...
Click to collapse
Downloadings not the problem, sending is - will try your gateway though
*edit* It works had to change the gateway as above and change to T-mobile internet

Mine only downloads if i have 3 g if i have only grps then it just keeps trying and trying

Mms help needed please

Hiya
Ok so ive had my x1 a couple of weeks now and love it to bits, however im really struggling with mms and wondered if anyone else has the same problem or if theres a tweak for it
Im on three network in the UK, and have got all the right settings on it .. I can send sms, and can connect to the internet via my network, but when I try to send an mms it will let me compose it but wont send. It just sits in my outbox looking pretty but refuses to go!
Any help would be greatly appreciated .. thanks
Mella

Go into you sms\mms folder (where your sms's are)
Go Menu. MMS Options
Goto the Servers tab and check that it is using the correct mms server

You have to create a new connection for mms, and set it to default for mms so it changes connection when sending mms messeges

Hiya
Yeh I have the three mms settings and they are set as default, but it still wont go .. any more ideas guys?

Check the following, but change telstra to three:
Go to Start, Settings, Connections, then Connections again.
Go to the Advanced tab
Choose Select Network
Change the second drop down box to Telstra MMS
Make sure you soft reset after making these changes
If you are still stuck give the x1 support hotline a call. They have fixed a few problems for me.

Most operators have a service that sends you the mms settings through a text message. The phone can then automatically pick that up and config it.
Some operators don't support the X1 yet though.

Hi buzz, thanks for getting back to me again!
It doesnt give me that option in that box unfortunately .. I debranded my phone using the uk rom
I dont get how it will let me browse the internet using three internet settings yet not send an mms through them, and ive checked my mms settings so many times. Aggghhhrrr its driving me crazy!
Ooooh wheres the help line number? I think thats going to be my next option ..

Angelusz said:
Most operators have a service that sends you the mms settings through a text message. The phone can then automatically pick that up and config it.
Some operators don't support the X1 yet though.
Click to expand...
Click to collapse
Yes unfortunately three dont support this phone so will not send me the settings, but ive found the settings online aswell as checking through my previous phone so im 99% sure im doing it right

Ok, you need to make a new connection in that menu for the second drop down box.
The first drop down box should say Three Internet (or similar).
Click the "new" button below the second drop down box and use these settings:
3 MMS settings
Access Point Name: mms.three.co.uk
Username: blank
Password: blank
Gateway IP (proxy) address: 217.171.129.2
MMS Message (Relay) Server URL: http://mms.um.three.co.uk:10021/mmsc
Then go into your SMS/MMS inbox and check that 3 MMS is your default mms server.
Last of all... soft reset and you should be right.

Woohoo it worked it sent it!
My last phone wasnt half as technical as this so its taking me a while to learn the ins and outs, but im determined to perservere as I love it so much.
Buzz your an angel .. Thank you so much for your help
Mella

No worries.
Make sure you keep these settings somewhere (especially if you are flashing new roms).
It took me a while to get my mms settings working (no thanks to telstra), but I'm always happy to help.

cant send MMS

i cant send and download mms but gprs working perfect
what to do all the setting is ok

To make my MMS work I had to do (and this is translated so might differ a little):
Message tab -> All -> Menu -> Settings -> Settings -> Menu -> MMS-server -> your profile -> then the connection was set to GPRS or WAP, change this to My ISP or My work network.

its not working

loney_frsu said:
its not working
Click to expand...
Click to collapse
What ROM are you using? I do know that some of the more recent ROMs have this particular problem.

MMS not working on Vodafone HD2
I've followed the instructions on the vodafone.co.uk site carefully for MMS server settings but my device simply fails to send OR receive MMS. This is highly annoying for such a new device.
HELP! Someone must have it sorted.

I have exactly the same problem except im an o2 uk user, cant send or recieve mms when using a cooked rom.

chrisdadd said:
I've followed the instructions on the vodafone.co.uk site carefully for MMS server settings but my device simply fails to send OR receive MMS. This is highly annoying for such a new device.
HELP! Someone must have it sorted.
Click to expand...
Click to collapse
And the same for me on VF UK. Can't send or receive MMS. Did you ever get it sorted?

not sure about vf, but for o2, you need two data connections setting up. 1 is wap, for mms, and the other is for actual data. If you set the mms server settings to use the normal data connection, it simply wont work.
Problem is when you go to settings menu all settings connection connection select networks edit, it only shows the currently selected data connection, you cant see that there is another connection setting there. So, you need to change teh top dropdown to the second data connection (o2 active its called for o2, whilst the normal data is called mobile web) and THEN you can see/edit teh settings for that connection.
the mms server settings need to be told to use O2 active and not mobile web, else it wont work.
Just some thoughts.

O2 user - same problem
I've just come back from an O2 shop, where one of the "experts" there failed miserably to get my phone to send or receive an MMS. I share all of the above frustrations.
samsamuel - could you do a step-by-step guide to the set-up you describe? I would like to try this but I am struggling to follow your explanation.

the_rascal said:
I've just come back from an O2 shop, where one of the "experts" there failed miserably to get my phone to send or receive an MMS. I share all of the above frustrations.
samsamuel - could you do a step-by-step guide to the set-up you describe? I would like to try this but I am struggling to follow your explanation.
Click to expand...
Click to collapse
sorry, my hd2 is back at O2 being fixed, and its not easy to do a step by step from memory.
I shall bookmark this thread and try to remember to come back and write a manual guide when it comes back. (Should be teh end of this week, all being well)

The connection details I have for my O2 HD2 are:
(Under Message tab -> All -> Menu -> Settings -> Options -> Menu -> MMS-server)
Server Name:
O2UK
IP Address:
193.113.200.195
Port Number:
8080
Server Address:
http://mmsc.mms.o2.co.uk:8002
Connect Via:
My Work Network
Messages Size Limit:
300 KB
WAP version:
WAP 2.0

samsamuel said:
sorry, my hd2 is back at O2 being fixed, and its not easy to do a step by step from memory.
I shall bookmark this thread and try to remember to come back and write a manual guide when it comes back. (Should be teh end of this week, all being well)
Click to expand...
Click to collapse
Thanks for the reply. I'll check here in a few days.

the_rascal said:
Thanks for the reply. I'll check here in a few days.
Click to expand...
Click to collapse
no worries. if you still havent figured it out yourself and i havent replied by, say, monday, feel free to PM me and remind me. (I have the memory of a 90 year old goldfish)

ok, so heres what i did last time i manually set up mms for o2.
settings menu all settings connections connections add new modem
name o2 active (tho of course name doesnt matter)
modem cellular line gprs
AP name wap.o2.co.uk
user o2wap
pass password
domain blank
then, sms tab, all messages, menu settings options menu mms server new
name o2 active MMS (again, name doesnt matter)
ip 193.113.200.195
port 8080
server add h ttp://mmsc.mms.02.co.uk:8080
connect via **choose the name you gave the modem connection in part 1**
if you choose your normal data connection it wont work, it needs to be o2s wap server.
message size 300k
wap ver wap 2.0
soft reset, and it 'should' work.