Related
Hi
After upgrading my XDAII to T-mobile ROM, MMS composer doesn't work. . I click the composer icon but nothing happens?
EzWAP v2 MMS also doesn't work. Please help me. Others work well.
Sonadt
I also have the same problem ater T-Mobile upgrade, you click on the MMS composer, but the program never starts
John
applecom said:
I also have the same problem ater T-Mobile upgrade, you click on the MMS composer, but the program never starts
John
Click to expand...
Click to collapse
you guys probably don't have mmreg in your startup folder.
Not sure if its the same thing
I had similar with i-Mate upgrade and found it was something in the 'Files' Sync followed by a soft reset. I had to hard reset and make sure I did not sync 'Files'.
I eventually made a new 'My Documents' on my PC, copied over what I needed and then syncd 'Files'. Don't let it sync the old stuff.
It was very odd :?
I've found the reason MMS and even SMS can not work properly (can not receive any SMS but you can send it).
That problem happens after restore back our data which I did backup by Pocket backup.
So the solution is:
- hard reset again
- install all programs again
- sync with PC to get personal data (you may lost some but contact, calenda, note... are OK)
Maybe new version is not compatible back with Pocketbackup.
T-Mobile USA MMS Setup
I've followed around the MMS+tmobile threads but don't see the specific setups parameters for the iMate XDA2 running WM2003. Questions I would have:
In MMS Composer->Servers tab:
1. what is TMO's gateway IP addr and server address?
MMS Composer Preferences tab:
1. In Connect Via:, chooices are: My Work Network, My ISP, Work, Secure WAP Network, The WAP network, The Internet. Which of these would be setup to connect to MMS server?
In Start-Settings-Connections-Connections-(My ISP) Manage Existing Connections, I've tried internet2.voicestream.com, wap.internet.voicestream.com and internet3.voicestream.com
but don't seem to have the options configed correct.
Any help on the forum would be appreciated.
T-Mobile USA MMS Setup
I've followed around the MMS+tmobile threads but don't see the specific setups parameters for the iMate XDA2 running WM2003. Questions I would have:
In MMS Composer->Servers tab:
1. what is TMO's gateway IP addr and server address?
MMS Composer Preferences tab:
1. In Connect Via:, chooices are: My Work Network, My ISP, Work, Secure WAP Network, The WAP network, The Internet. Which of these would be setup to connect to MMS server?
In Start-Settings-Connections-Connections-(My ISP) Manage Existing Connections, I've tried internet2.voicestream.com, wap.internet.voicestream.com and internet3.voicestream.com
but don't seem to have the options configed correct.
Any help on the forum would be appreciated.
I've just recently upgraded from the E200 to the SPV M1000. I'm fairly new to all the functions as I just used the E200 just as a phone.
Am I doing something wrong as I can't seem to recieve MMS any more, or set seperate ring tones to particular contacts.
Also I've noticed there is a ROM updade to 1.72, what benifits would this give me, and where can I get hold of it...
Thanks, in advance
seperate ringtones require a 3th party program
mms require that it's setup in mms composer and under connections
I am in the same position, I have just upgraded to an M1000 to find no MMS, the problem it seems is not setting up the MMS connection, it is that there is no version of MMS Composer installed on the phone. Does anybody know where I can get this software? I understand EzWAP might solve the problem but it has mixed reviews and some people say MMS doesn't work on the M1000 with it.
I think the software that is used by other networks is made by Arcsoft, but I can't find anywhere to download the software from,
Cheers in advance of any help
I'm surpised to hear Orange don't supply an MMS Composer? I use an XDAII on Orange and the MMS Compose O2 supplied works fine when configured for Orange. You can happily use the MMS Composer .cab file found here. Just copy to the m1000 and double click to install.
If you feel up to it you can unhide and unprotect the extended ROM, copy the cab file there and edit the config.txt file, then re-protect the extended ROM. That way if you hard reset, the MMS Composer .cab will automatically be re-installed. More details on doing this (it's relatively straightforward) can be found here.
Thanks for the link, it has installed fine on my phone. Do you know where to get the Orange settings for MMS? I was told I need to set up a new connection then configure the Composer, but I rang Orange and the best they could do was send a SIM update which did nothing at all!!
Cheers,
Fin
Yes, forgot that part! See here, the guide is for XDAII users but if you read through it you'll find the relevant sections for configuring MMS which apply to the Orange network regardless of whether you use an m1000, XDAII etc.
Dont know if yo will see this message seeing as it was last week but on the orange website there is now a rom upgrade which gives you a mms composer i have just downloaded it and it works fine....takes a while to upgrade though :lol: :lol:
Thanks, I meant to put something on this thread about the new ROM update, downloaded it the other day and it is great! Orange are bizarre though, I emailed them about a new ROM only a few days before and got a reply saying that MMS was not going to be supported at all on the M1000, so I was a bit shocked to see the update only two days after!
New Rom update
Thanks, I spoke with Orange yesterday about the MMS and they told me there is a new ROM update. I've downloaded it and applied. However when I restored all the data via xBackup the menu and application had gone. I tried this twice from the hard reset and the same applied, so I just rebuilt it manually.
Hey all,
i have found a new mms program that is currently in beta testing that seems to work so far in wm05. the address is http://electricpocket.com/products/pixermms.html you can find the download there near the bottom, the correct one is where it mentions xda.
i however am unable to test send/receive features because i cant work out how to set up gprs/wap in magneto some help with this would be appreciated.
THNAKS IVANT .. yes CONFIRMED PIXER can send MMS using MAGNETO .. but i cant receive an MMS (need to confirm yet) .. at least this is a good start .. .. thanks again..
PS dont use local number coding instead use international Number coding
example
09173xxxxxx4 <- local
+639173xxxxx4 <-international
if you cant connect to GPRS you need to connect manually
(Start->Settings->Connections tab->Advanced Tab->Select Networks Button->Edit Button->Tap and Hold the Modem Connections then connect)
try any of this three cab see which one will work for you
MMS
I wasn't able to get this to work. Stayed stuck on "0% Connecting" even when my GPRS connection was established prior. Funnily enough, if i DIDN'T establish the GPRS connection manually then it said "Authentication OK" even though it wasn't connected to anything! Then it would just hang.
I have to soft-reset to get out of it as "Cancel" does not work.
Using:
WM2005 1.50g
Radio 1.17
i-mate PocketPC
Vodafone NZ
I have not had any joy with MMS Composor 2.0.0.20 for Magneto either (hence why I'm trying this). I am about to install EzWAP 2.5 and try that again. Had some issues with it though, will try again. MMS is just handy to have. You wonder what messages you're missing out on without it
toenailed said:
THNAKS IVANT .. yes CONFIRMED PIXER can send MMS using MAGNETO .. but i cant receive an MMS (need to confirm yet) .. at least this is a good start .. .. thanks again..
PS dont use local number coding instead use international Number coding
example
09173xxxxxx4 <- local
+639173xxxxx4 <-international
if you cant connect to GPRS you need to connect manually
(Start->Settings->Connections tab->Advanced Tab->Select Networks Button->Edit Button->Tap and Hold the Modem Connections then connect)
Click to expand...
Click to collapse
Toenailed,
Does this use the Smart/Globe MMS Settings or the Smart/Globe Internet(GPRS) Settings from the Autoconfig app?
Thanks
Sending is work perfectly, but the receive...
pixar 4
hello to all
i have allready tryed that prog and it keeps saying that the messege was reject for unknon reason and to check my card for mms etc
card as mms enable
it says that allways the diference now is the international nunber format now it says 10% 20% to 100% them it gives me the error
i manualy conect but no luck
so i get Messagw rejected- no reason given
wap service unavailable
Please check with you operator ....etc etc
help needed
thanks
toenailed said:
THNAKS IVANT .. yes CONFIRMED PIXER can send MMS using MAGNETO .. but i cant receive an MMS (need to confirm yet) .. at least this is a good start .. .. thanks again..
PS dont use local number coding instead use international Number coding
example
09173xxxxxx4 <- local
+639173xxxxx4 <-international
if you cant connect to GPRS you need to connect manually
(Start->Settings->Connections tab->Advanced Tab->Select Networks Button->Edit Button->Tap and Hold the Modem Connections then connect)
Click to expand...
Click to collapse
Toe,
Could you post your settings for Pixer4?
My settings are below and I cant seem to send nor receive..
Thanks..
hi jenellej.. just run the GPRS cab ..
under in Service use Globe MMS Settings or Smart MMS Settings or Sun MMS Settings
for sun
"Gateway"="202.138.159.78"
"MMS URL"="http://mmscenter.suncellular.com.ph"
for GLobe
"MMS URL"="http://192.40.100.22:10021/mmsc"
"Gateway"="192.40.100.20"
for Smart
"MMS URL"="http://10.102.61.238:8002"
"Gateway"="10.102.61.46"
i already try the GLOBE and SUN .. but i havent try it with SMART yet
one last thing .. during sending .. the connectivity will not popup that it is connecting to GPRS .. but Pixer4 will say it connects .. suprisingly it does send without the GPRS Connecting notification appeared .. so its normal that you though it doesnt established a connection but in fact it does ..
PS Dont install also ArcSoft MMS COmposer
I manually configured my connection settings. But there should be no problem using toenailed cab. I used to have problems, maybe because it causes conflict with Arcsoft MMS. I uninstalled it, then it worked!
still doenst work
can ´t get it ti work in vodafone.pt i have tryed every possible combination and still get the message rejected for unknown reason
i will not give up lol
gateway 213.30.27.63
url http://mms/servlets/mms
port 9201
After sending--- device Hang
Hi, after I send the MMS using Pixer, the device just freeze. Any help? I'm using manual configuration for DiGi Malaysia.
Re: After sending--- device Hang
muhelen said:
Hi, after I send the MMS using Pixer, the device just freeze. Any help? I'm using manual configuration for DiGi Malaysia.
Click to expand...
Click to collapse
it takes time for it to send. just wait for it. it will seem it hanged but in fact it isn't. it takes time on "authenticated-ok" but after a while, it goes on smoothly.
for SMART (philippines):
here's the settings for Pixer..
Start/Settings/Connections/Connections
Click Advanced Tab, choose Select Networks
Under "Programs that automatically connect to the Internet should connect using:", click new.
Under General Tab:
Enter a name for these settings: Smart MMS
Under Modem Tab:
Tap new, enter a name for the connection, select "Cellular line (GPRS)" then tap next.
Access point name: mms
Click Next then Finish.
NOw open Pixer4.
Tap Options/Preferences/Advanced.
Wap Gateway IP Address:
10.102.61.46
MMS URL:
http://10.102.61.238:8002
Service:
Smart MMS
Click OK, check "Get Message Immediately" then OK.
for GLOBE and SUN settings, refer to toenailed's post above.
i was working on a cab with toenailed's help (thanks toe!!!), but i still can't get it to work. maybe later i'll figure it out when i'm not too busy. :wink:
I can send using Pixer4 on the Orange network. Not sure about receiving yet.
My Pixer4 settings:
Wap Gateway IP Address:
192.168.224.10
MMS URL:
http://mms.orange.co.uk
Service:
Orange MMS
works perfectly on sending MMS message (Etisalat) Operator & 1.5 WM but recieving is not working even when retrieve option is ticked, but that could be because of the workarounds am doing with MMS composer, am trying to replace the pop3 account in my inbox with MMS composer but no success so far :shock:
How abaut EzWAP MMS
i'm not try it yet but i thought it work.... :roll:
Re: After sending--- device Hang
mariolouis said:
muhelen said:
Hi, after I send the MMS using Pixer, the device just freeze. Any help? I'm using manual configuration for DiGi Malaysia.
Click to expand...
Click to collapse
it takes time for it to send. just wait for it. it will seem it hanged but in fact it isn't. it takes time on "authenticated-ok" but after a while, it goes on smoothly.
Click to expand...
Click to collapse
mariolouis, thanks for the explanation. It's really take time to send. Infact, I'm waiting more than 10 minutes, but still the same!
try this MMS Composser
this two cab must instaled
Re: try this MMS Composser
mwilmar said:
this two cab must instaled
Click to expand...
Click to collapse
Are these files the same ones with WM2003SE(Arcsoft?)? Or is the MMS Composer also Pixer?
Re: try this MMS Composser
jenellej said:
mwilmar said:
this two cab must instaled
Click to expand...
Click to collapse
Are these files the same ones with WM2003SE(Arcsoft?)? Or is the MMS Composer also Pixer?
Click to expand...
Click to collapse
Arcsoft MMS Composer 1.6
I've recently acquired an xda mini s from 02 as a free upgrade, however i want to put a vodafone sim card in it.
I've got the gprs working, but the mms isnt at all.
I've tried numerous cab files, can anyone help? maybe typing the settings in by hand?
please
Jaxx
sounds like you've done a soft reset after a hard reset bypassing the extended rom install? The only way to get the MMS application is to hard reset and do a "Basic" install then remove the O2 stuff from the Windows startup folder. Once you've done this you'll have the MMS app with O2 settings that you can just change to Vodafone settings.
Ok, tried this and still not workin.
What is going on here?!
do you meand MMS isn't working still or you still don't even have MMS in Pocket outlook
Do a search for removing the O2 stuff, there are many topics with the cab files to install to recover the MMS inbox
If however you have the inbox, just not the settings call vodafone and get them to tell / e-mail you
or go here http://www.filesaveas.com/gprs.html
I managed to fix this problem finally.
The problem was that the MMS software was trying to connect using the vodafone Live access point, which isn't correct. had to set up a whole new connection for the MMS settings, it is now working fine.
Any chance you could post those settings here as I'm having exactly the same problem?
SMS is fine it's just the MMS I cant get working, Inbox is there just the setting that seem to be wrong.
This helped me out:
http://www.expansys.com/forumthread.asp?code=124833&thread=29&man=QTEK
I can now send, but not receive MMS with my voda sim on my mini-s
Perfect Thanks,
I can now send and recieve MMS, SMS and Surf the "world wide wait"
Not sure why you cant recieve MMS though, I followed your instructions to the letter and all worked straight away, albeit a bit slow but then I think that's a tarrif thing with Vodafone. (I'm on a corporate contract with my own unlocked Mini-s)
I dont suppose you know the URL to access the Vodafone live site as well do you?
Hello, I have the same issue. But l'm on O2 , using o2 mini S , device. I can receive and download MMS , but I can't send MMS to another person. Is the any thing I miss? l'm using corporate mode.
Not sure about the corporate mode but I do know that unless you have the settings in exactly the right places you will have problems.
This link from earlier in the post should help you solve your problem though.
The second link is for Vodafone but use it to give you an idea of where you should be setting up the various elements.
You could also try searching for "O2 MMS Settings"
http://www.filesaveas.com/gprs.html
http://www.expansys.com/forumthread.asp?code=124833&thread=29&man=QTEK
Hi,
I've just upgraded my Blue Angel (O2 XDA IIs) to Xplode's latest WM6 ROM and its working perfectly appart from MMS and GPRS.
I've installed both MMS cab files and I can compose an MMS message, but when I try to send the message, it will say sending, but the message will remain in the outbox and it will never get sent.
Similarly, I cannot access the internet through Internet Explorer with GPRS.
Can anybody please tshow me exactly how to setup my Blue Angel for this?
Thankyou,
Laser493
Laser493 said:
Hi,
I've just upgraded my Blue Angel (O2 XDA IIs) to Xplode's latest WM6 ROM and its working perfectly appart from MMS and GPRS.
I've installed both MMS cab files and I can compose an MMS message, but when I try to send the message, it will say sending, but the message will remain in the outbox and it will never get sent.
Similarly, I cannot access the internet through Internet Explorer with GPRS.
Can anybody please tshow me exactly how to setup my Blue Angel for this?
Thankyou,
Laser493
Click to expand...
Click to collapse
Your first problem seems to be GPRS setting. If that is not set properly, even MMS will not work.
GPRS: I am not familiar with O2 parameters, but you need to go to Settings > Connections > Connections and MY ISP and create a new or manage an existing connection. Parameters needed are : Connection name, modem of Cellular Line(GPRS), access point name, User Name (O2 's GPRS users name), and password.
This should be enough to set your GPRS settings.
Once this is set, you need to setup MMS. Open Messaging, then Menu > Options > click on MMS. Go to Servers Tab and click New, here you need to set Server name, Gateway, port number, server address and most important is the connect via, set My ISP (GPRS connection name). You are all set and set this MMS as your default.
Install HTC Network Wizard, go to Settings-Connections-Network Wizard, choose your country and operator, soft reset and voila!
DANDANA is right , it will work for you.
But as we know Network Wizard has limited list of operators so for example it is useless to me and i have to perform all of the settings manually, because my operator is not on the list
xplode said:
DANDANA is right , it will work for you.
But as we know Network Wizard has limited list of operators so for example it is useless to me and i have to perform all of the settings manually, because my operator is not on the list
Click to expand...
Click to collapse
Whilewe are on the mms/gprs subject:
at the moment, i have 2 settings on my gprs connection 1. gprs wap (internet) 2. mms
the way it works is, if i need to connect t internet then i need to set up connection to gprs wap MANUALLY, and the same thing for mms.
the problem is if my connection is set up on gprs, and there is an incoming mms, it fails to receive automatically.
how can i set it up automatically? I know there is "AUTO PICK" option, but I tried it before and it doesnt work.... or does it?
how do you guys set this up?
Thanks
Try this CAB
Or you can try to use Schap's Operator settings....