Related
Hello, all, i have stock 1.14 rom, where can i find an hspl for this rom. Anything, that can put hspl on this rom plz/ Please help, new to this forum..
Elite_ said:
Hello, all, i have stock 1.14 rom, where can i find an hspl for this rom. Anything, that can put hspl on this rom plz/ Please help, new to this forum..
Click to expand...
Click to collapse
Here you go mate. Bottom of first post in this thread. Don't forget HSPL 1.14 is only to be used used on roms based on pre 1.56, i.e. everything before 1.56. You will need to use HSPL 1.56 for all roms based on 1.56+
Thxs mate, as i said am new, a bit confusing.. U refered me to the site, but, it says "New version will work on SPL 1.54 or above ROMS ". so what should i do ?
Elite_ said:
Thxs mate, as i said am new, a bit confusing.. U refered me to the site, but, it says "New version will work on SPL 1.54 or above ROMS ". so what should i do ?
Click to expand...
Click to collapse
SPL 1.54 and a rom based on 1.56 are 2 completely different things.
What rom are you trying to flash? If its just for a stock 1.14 rom then all youi need is HSPL 1.14
There is also this dummies guide fore flashing 1.56+ roms
OMG, am sorry, didnt know about the 'unsigned' before, doing the update now, thxs /
I used the unsigned version to flash my stock 1.14 rom , it became olinex, all were good. but when i used the energy rom[standard] from NRGZ28, it went ok but my blackstone screen is messed up with colours , everthing is wrong concerning colours.. What should i do ? I also wanted to do a hard reset but its not working !! I dunno what to do / plz help
Elite_ said:
I used the unsigned version to flash my stock 1.14 rom , it became olinex, all were good. but when i used the energy rom[standard] from NRGZ28, it went ok but my blackstone screen is messed up with colours , everthing is wrong concerning colours.. What should i do ? I also wanted to do a hard reset but its not working !! I dunno what to do / plz help
Click to expand...
Click to collapse
As I stated above you need to use the correct HSPL for whatever rom your using. If you want to use latest NRG rom you need to use HSPL 1.56. If your use incorrect HSPL you get colour distortions and unable to connect to make calls etc etc
Upgraded to latest hspl , and everything is fine.. Thxs//
No probs, just glad you got it sorted
Flashing Radio guide !!!!
Fallen Spartan said:
No probs, just glad you got it sorted
Click to expand...
Click to collapse
Hi,
I couldn't find any detailed guide about flashing radio ...
I want to put 1.09 radio (that came in a 1.14 rom) in my HD that have 1.14 stock spl but now have Miri 21882 rom that entered there with USPL GUI v 2.5 ...
Now I must use USPL GUI v 2.5 again to flash the radio ?
May I just have to flash the radio because my SPL is 1.14 and radio 1.09 came from a 1.14 rom ?
Is possible put any radio in any rom ???
I did not find any guide for that !!!
Help !!!
Thanks.
Marne Jr said:
Hi,
I couldn't find any detailed guide about flashing radio ...
I want to put 1.09 radio (that came in a 1.14 rom) in my HD that have 1.14 stock spl but now have Miri 21882 rom that entered there with USPL GUI v 2.5 ...
Now I must use USPL GUI v 2.5 again to flash the radio ?
May I just have to flash the radio because my SPL is 1.14 and radio 1.09 came from a 1.14 rom ?
Is possible put any radio in any rom ???
I did not find any guide for that !!!
Help !!!
Thanks.
Click to expand...
Click to collapse
It is possible to put any radio on any rom...yes. Just re-use USPL and then flash radio. A number of roms come with radio's included. If you do not want this radio, after you have flashed rom, just re-use USPL again and flash your desired radio
dear friends
is it possible to downgrade from wm7 to wm 6 or 6.1 ?
i have wm7 now running on htc touch Elf (originally bought with wm 6) .
thanks
mokmail said:
dear friends
is it possible to downgrade from wm7 to wm 6 or 6.1 ?
i have wm7 now running on htc touch Elf (originally bought with wm 6) .
thanks
Click to expand...
Click to collapse
You have WM7??
Can you send some pics?
Where did you get it from?
I'm guessing it's WM6.5.X not WM7. There have not been any leaks yet.
dwizzy130
dwizzy130 said:
I'm guessing it's WM6.5.X not WM7. There have not been any leaks yet.
dwizzy130
Click to expand...
Click to collapse
LOL....yes, you have 6.5.
Step 1 is to make sure you have a hard spl for your device (this protects your phone from being destroyed)
Step 2 is to download a rom that has 6.1.
You will find everything...<<HERE>>
its wm 7
it runs too slow on my htc
i will post some pics as soon as i can , it looks really bad , i prefer not to update and wait till the last version released.
ah..... it´s welcome screen is not green its orange
band27 said:
LOL....yes, you have 6.5.
Step 1 is to make sure you have a hard spl for your device (this protects your phone from being destroyed)
Step 2 is to download a rom that has 6.1.
You will find everything...<<HERE>>
Click to expand...
Click to collapse
---------
thanks for your reply
what is the hard spl and how to get it , sorry , i have no idea , i was good in upgrading not downgrading ,
thanks againg
spl
band27 said:
LOL....yes, you have 6.5.
Step 1 is to make sure you have a hard spl for your device (this protects your phone from being destroyed)
Step 2 is to download a rom that has 6.1.
You will find everything...<<HERE>>
Click to expand...
Click to collapse
---------
thanks for your reply
what is the hard spl and how to get it , sorry , i have no idea , i was good in upgrading not downgrading ,
thanks againg
mokmail said:
it runs too slow on my htc
i will post some pics as soon as i can , it looks really bad , i prefer not to update and wait till the last version released.
ah..... it´s welcome screen is not green its orange
Click to expand...
Click to collapse
If it's WM 7, I would like to see the pics....thx!
can u upload the wm7 rom for us so we could try it out
Plzz post some screen shots otherwise at least give the link frm where u downloaded dat.. v wanna try...
Dear All
Link updated.....Solved the error of ONBL
I am Tahir, an OPAL owner from India
To all the OPAL lovers here I present my first 6.5 ROM based on build 21889
I know its a quite old build now, but I liked it the most & have been testing it for past 10 days
My special thanks to my friend Sumit also K/as Krazy about Technology from Gene forum who is my Guru to this windows mobile world. he has been a tremendous support to me for all my queries & setting up the basics for this ROM.
Some of the EXT packages & folder customization have taken from Sumit's ROM for Gene.....by the way I myself own a New Gene
This ROM is free of bugs to my best knowledge rest I leave to you all my freinds
Feedback is most awaited & I hope you would like this release
Feature
- Based on original stock ROM of OPAL OS version 1.35.0.0
- EXT replaced with Mega ROM to reasonable extent
- With all stock drivers from OPAL
- Highly stable....( although you people will give more feedback)
- Unlike other ROMs, home settings tab now working fine
- Customized folder & few apps taken from Sumits ROM have been added...Thanks to Sumit
- Plain Winmo 6.5 look....no customization
- Registry tweaked to enhance battery life
- 65-69 Mb free RAM at startup & 128 Mb device storage
- Soft key menus & selection bars specially edited to make them more finger friendly
- Idea Operator flash logo removed...( as its irritating for people abroad)
- List of packages included
AdobePDF
Advanced_Configuration_Tool_v3_3
HTC Album
Arcsoft_MMS
AudioBooster
AudioManager
Battery Tweaks
BootLauncher
ClearTemp
GoogleMaps
JBed_3dMod
LockStreamDRM_1_1_080625_O9_02=True§
EzInput_Western
PhoneCanvas
PictureEnhancement
PIM_Backup_Dotfred
RandomAccess
RingtonePlugin
RSSHub_2_1_1_1069_00=True§
SecurityWarningOff=True§
Settings+=True§
ShareDLL_2.0.070522.0000=True§
SKTSync
SmallUtils
StreamingMedia
TaskManager
UCWeb_Browser V6.3
USBToPCPopUp
VoiceRecorder
XDAShutdown
YouTube
Zip
And many more....
Guidelines for flashing
Although it does not require different flashing procedure but I thought its better to avoid any mishap
*flash it using RUU available for OPAL
* after flashing wait for few minutes & then proceed to Screen alignment, it will help to avoid lagging in screen cursor
*Set the time zone, tap on screen for completion
* then the phone would go for customization, please don't stop it by any means. It is not OEM customization, it install few registry settings setting provided by some great chefs at XDA
* let the customization complete, be patient it may take more than 6-7 minutes
*After the device restarts, again do a soft reset
* some users may encounter the problem of home settings not working after loading msgs & contacts...buts it tempoarary problem...soft reset your device it will work
Now ur phone is ready to use
Give your feedback
Links: http://www.4shared.com/file/WmQqnrtp/ruu_signed.html
please post some screenshots, did you include EzInput ?
xtitan said:
please post some screenshots, did you include EzInput ?
Click to expand...
Click to collapse
Screen shots not required as it a deflaut winmo 6.5 ROM, no extra themes
All original grphics available in winmo 6.5
Ezinput is included....
Nice imblfmstr, congrats.
I can't try as you know my slow internet. But iam sure it will be nice. Btw my wm 6.5 version on the way.
I will sure try it
jagan2 said:
Nice imblfmstr, congrats.
I can't try as you know my slow internet. But iam sure it will be nice. Btw my wm 6.5 version on the way.
Click to expand...
Click to collapse
Thanks Jagan
I will sure try ur ROM, My office internet is too good....fingers crossed
I hope the ROM will be up today, so that I can download it tomorrow
By the way can u sent me the list of ur EXT in text file, my manilla2d is not working just wanted to confirm what all packages are required additonal
I haven't cooked m2d yet when i cook i will send you the list, and yes some packages are essential to make m2d work.
Please help, my Opal has ONBL 1.27.0000, SPL 1.26.cmon
when I flash your rom, my Opal stay at bootloader screen with this text
"Your OS ROM isn't customzed for your hardware"
xtitan said:
Please help, my Opal has ONBL 1.27.0000, SPL 1.26.cmon
when I flash your rom, my Opal stay at bootloader screen with this text
"Your OS ROM isn't customzed for your hardware"
Click to expand...
Click to collapse
Sorry dear I think the data you have given is not correct
your SPL should be 2.00.cmon, Just check in the forum for hard SPL thread if you can upgrade to 2.00.cmon
By the way my device has ONBL 1.35.0000 and I have cooked this ROM with stock ROM from my phone...so might be compatibility issue because higher version on ONBL
imblfmstr said:
Sorry dear I think the data you have given is not correct
your SPL should be 2.00.cmon, Just check in the forum for hard SPL thread if you can upgrade to 2.00.cmon
By the way my device has ONBL 1.35.0000 and I have cooked this ROM with stock ROM from my phone...so might be compatibility issue because higher version on ONBL
Click to expand...
Click to collapse
imblfmstr while cooking you included, onbl too?
If yes remove it, problem would get solved i think. Btw just using indian stock rom drivers wont creat prob coz i have once tried to use spanish stock rom driver and it worked fine.
jagan2 said:
imblfmstr while cooking you included, onbl too?
If yes remove it, problem would get solved i think. Btw just using indian stock rom drivers wont creat prob coz i have once tried to use spanish stock rom driver and it worked fine.
Click to expand...
Click to collapse
I don't know how to remove ONBL....
If u can tell...I will recook
This ROM is working awesome on my phone....I am very happy with this
Its just like official Upgrade....no glitches...no errors...
absolutely fantastic...even I could not believe how I did this....
imblfmstr said:
I don't know how to remove ONBL....
If u can tell...I will recook
This ROM is working awesome on my phone....I am very happy with this
Its just like official Upgrade....no glitches...no errors...
absolutely fantastic...even I could not believe how I did this....
Click to expand...
Click to collapse
i think onbl 1.35 work fine with those who have stock onbl 1.27
myself use onbl 1.27 on my stock onbl 1.35.0000
when you flash rom with onbl 1.35 your onbl that is 1.27 will change to 1.35.0000
Bug...
I have the error "Your OS ROM isn't customized for your hardware", with SPL 2.00.cmon...
Tuxologue said:
I have the error "Your OS ROM isn't customized for your hardware", with SPL 2.00.cmon...
Click to expand...
Click to collapse
also happened to me
Its working fine with me
aidinvm_ultimate said:
also happened to me
Click to expand...
Click to collapse
I don't know why its happening with you guys.....
Mine is working absolutely fine & superb battery life...
will look into it...might the the ONBL problem as said by Jagan
@jagan...if u can pls suggest buddy...
@imblfmstr: Okay do one thing download this.
Then open your rom in that editor, then u delete everything except the os part thats it.
jagan2 said:
@imblfmstr: Okay do one thing download this.
Then open your rom in that editor, then u delete everything except the os part thats it.
Click to expand...
Click to collapse
Thanks Jagan will try this...
ONBL 1.35
Can someone post onbl 1.35 for download?
Not working
imblfmstr said:
Thanks Jagan will try this...
Click to expand...
Click to collapse
Sorry Jagan....nothing is shown wen i open the ROM with this app
Great ROM
Hi Tahir ( imblfmstr ),
This is really a very nice ROM. Initially it felt bit slow but after 3 to 4 Soft resets this problem was solved. Now the ROM is fast and battery life is very good.
Is it possible to cook a ROM like this for 6.5.3 (The one with Start Icon at the bottom). I feel 6.5.3 is more finger friently.
Thanks for the nice ROM. Waiting for your next 6.5.3 ROM .
mail2eswar said:
Hi Tahir ( imblfmstr ),
This is really a very nice ROM. Initially it felt bit slow but after 3 to 4 Soft resets this problem was solved. Now the ROM is fast and battery life is very good.
Is it possible to cook a ROM like this for 6.5.3 (The one with Start Icon at the bottom). I feel 6.5.3 is more finger friently.
Thanks for the nice ROM. Waiting for your next 6.5.3 ROM .
Click to expand...
Click to collapse
Thanks buddy.....
It takes 3-4 soft reset to make it smooth because I have included 5 different sets of registry tweaks made by some great XDA developers....intially it takes time to make the changes...
Hi Dear Guys ,
Is it possible to flash stock rom of different seriel ( Region ) with out doing bepe hspl2 , i mean if i have stock rom with asian wwe and i download eu wwe from official htc site , can i flash that stock shiped eu wwe rom on my asian wwe serial hd2 with out doing any hspl or sspl
Thanks
Wow! Really important indeed!
If you'd have taken the time to read the stickies, you would know that it's not gong to work and you'll get an 'Invalid vendor ID' error message.
Why would you not want to flash HSPL? With HSPL2 available, it's easy to revert to stock SPL and flash a stock ROM, should you need to send your device for repair or anything.
No, you'll need to use either hspl or sspl.
@ tomasz
i was used before kovsky that was my 1st htc brand and its much differ with black stone
Dear Guys ,
according to study , stock spl only revert back by usb method , and my second question , after hspl2 can i use official ruu (htc offcial updater) for updating custom roms ? as i think if i use it to flash i dont need task29 as offcial updater clean even binary files .. any idea ?
newstar said:
@ tomasz
i was used before kovsky that was my 1st htc brand and its much differ with black stone
Dear Guys ,
according to study , stock spl only revert back by usb method , and my second question , after hspl2 can i use official ruu (htc offcial updater) for updating custom roms ? as i think if i use it to flash i dont need task29 as offcial updater clean even binary files .. any idea ?
Click to expand...
Click to collapse
HSPL2 can also be used to revert back to stock spl. After installing hspl, the flashing is the same as got the Blackstone, ie run the RUU. Some have used the official RUU instead of the CustomRUU to flash, but I haven't tried it and I just use Task29 prior to flashing. The whole thing from Task29 to installed rom takes only 5 minutes.
@ ClydeB1 Thanks
My stock HSPL is 1.66.0000
i can do any hspl2 version for me ?
You can do anything you want - HSPL2 is used to flash ALL version of HSPL and SPL
newstar said:
@ ClydeB1 Thanks
My stock HSPL is 1.66.0000
i can do any hspl2 version for me ?
Click to expand...
Click to collapse
As long as you choose one of the spl's ending in HSPL and not 0000 you can flash to any cooked or stock rom. Use HSPL2 again to return to your original spl when needed.
sory for my bad english iam using wm 6.1 and rom 1.56.0.0
i would like to install a rom not funcy bad fast and if someone knows a rom with greeke lang thanks in advance.would it be posibal to restor the original rom?because my blackstone its brand new (1 month )
gagdos said:
sory for my bad english iam using wm 6.1 and rom 1.56.0.0
i would like to install a rom not funcy bad fast and if someone knows a rom with greeke lang thanks in advance.would it be posibal to restor the original rom?because my blackstone its brand new (1 month )
Click to expand...
Click to collapse
look at http://forum.xda-developers.com/showthread.php?t=462235
thanks my friend bud the links are died .do you know if i can use one of the roms for wm 6.5?
gagdos said:
thanks my friend bud the links are died .do you know if i can use one of the roms for wm 6.5?
Click to expand...
Click to collapse
try to download it from here
You can find a lot of WM 6.5 ROM for your device at http://forum.xda-developers.com/forumdisplay.php?f=453
...
install hslp 1.56 olinex to your device.
once you have this on your device, you will be able to flash to any custom rom for blackstone.
download link for HSPL 1.56 OLINEX
Rn
gagdos said:
...do you know if i can use one of the roms for wm 6.5?
Click to expand...
Click to collapse
Forget about speed in WM6.5. It's not designed for Blackstone. Stay with 6.1
teti77 said:
Stay with 6.1
Click to expand...
Click to collapse
+1 for wm6.1
ok i can understand :
1.for speed i must stay in roms for wm 6.1 can you give me some links?
2.i can install roms for wm 6.5 ,although i am using wm 6.1 ,but the speed will be ?
3.is it possible after installing a rom to reinstall the original and if yes how can i backup tthe original?
thanks for all the answers in advance
MOD EDIT - Thread moved to General forum. All queries should be posted here. Only rom development is allowed in rom development forum
...
1.you can test my 6.1 rom that im currently making if you want? (private message me if you would like to test it)
2.personally i found the speed is slightly faster on 6.1roms
3.visit the xda touch hd wiki for the original rom dumps, its too much work to dump the rom yourself so just download one thats already been done. to be honest, you wont even need it.. there is a wide variety of differant custom roms avaliable. (+ the original roms are crap )
Rn
any ather suggestions ?for the rom?
1. Kwbr_Topix_3.5_Weather_WM6.1, M2.1
2. Park's ROM Basic 1.3 WM6.1, M2.1
Two fastest ROMs on the planet (both WM6.1)
You can still find them in ROM section
i can find them in the forum or iam doing something wrong, do you have them ?or someone else.
PARK's ROM:
http://forum.xda-developers.com/showthread.php?p=5466130
TOPIX:
http://media.celogeek.com/roms/kwbr/Kwbr_HD_3.5_Weather_WM6.1.rar
Good Luck and enjoy!
raving_nanza said:
install hslp 1.56 olinex to your device.
once you have this on your device, you will be able to flash to any custom rom for blackstone.
download link for HSPL 1.56 OLINEX
Rn
Click to expand...
Click to collapse
Thank you. Now my german HD is english. Is there any chance zo make it hungarian?
...
i didnt see any hungarian roms avaliable but here is the wiki list:
blackstone custom rom wiki
Rn
Predi76 said:
Thank you. Now my german HD is english. Is there any chance zo make it hungarian?
Click to expand...
Click to collapse
Check blackSTONEhenge ROMs.
I see hungarian flag under cook's name, and I think Wajk cooked at least one ROM in/with hungarian language...
[EDIT] Oooops.... now I see... Wajk did 6.5 ROM... check it anyway... [END EDIT]