Guys,
Am in need of some desperate help.
Up until tonight all was well with the HD2.
However, for some unknown reason every time I now launch Opera it changes the name of my Storage Card to Storage Card 2 which you then can not enter in Resco Explorer and in place creates a new folder named Storage Card and places 2 folders inside:-
OperaCache (with 264 files within)
Inbox.numbers (and inside this folder Mail Attachements which is empty).
What this means is because it has changed the name of the Storage Card I can't access any of my installed applications/photos/videos/music...nothing.
If you then soft-reset, as it is rebooting it is looking for items in the content of Storage Card but Storage Card was renamed and the consequence is the phone doesn't boot up correctly.
The only 'tempory remedy' (until I next use Opera) is when the Phone has finished rebooting, I launch Resco Explorer, Rename Storage Card to Storage Card 3 and again soft-reset.
This time when the Phone reboots Storage Card 2 (the real Storage Card) is renamed back to it's original name of Storage Card and the Phone boots up normally.
All seems well until I then load Opera again ........ which then goes through the whole process over again in renaming Storage Card and creating another.. etc. etc.
Help... help... help.
This is more than annoying as it is effecting my work and here we are talking patient care which is of paramount importance to me.
Note:
I have tried rolling back the system to a previous Backup point using Sprite Backup but no matter which Restore file I select once the system reboots to this restore point and I again launch Opera it does the same thing over again.
I got the same, it was because I had changed the cache location to the SD Card, but when I had the device plugged in via USB in Disk Mode it stops the phone seeing the SD Card.
I just moved the cache back to the phone, and the problem goes away!
stratplayer said:
I got the same, it was because I had changed the cache location to the SD Card, but when I had the device plugged in via USB in Disk Mode it stops the phone seeing the SD Card.
I just moved the cache back to the phone, and the problem goes away!
Click to expand...
Click to collapse
Are you talking about Cache Directory4 in the Opera:Config?
Edited:
Many thanks statplayer. Initial findings show this may have cured the problem.
I'll be doing some testing later tomorrow when I get up (bed time now).
The only thing I am totally baffled about is I did the Cache Directory switch to Storage Card quite some time back.
Since then I have used Opera and the rest of the system every day without any problems.
What's made it all of a sudden decide it wanted to react today and not on the day I first changed the Cache area???????
Obviously this I would love to know.
Anyway, if this has cured the problem I owe you a debt of thanks.
Will report back tomorrow.
In the meantime ~ Guys if you can offer any further advice on why it's not played up before, please chip in.
Beards
I had exactly the same issue in the situation specified regarding changing the Opera cache location to the storage card, accessing Opera with the USB plugged in (not activesync mode), and disconnecting the USB card then causing the phone to call the ACTUAL SD card "Storage Card 2" because Opera had already stolen the name.
It did cause a panick at first!
morpheus1982 said:
I had exactly the same issue in the situation specified regarding changing the Opera cache location to the storage card, accessing Opera with the USB plugged in (not activesync mode), and disconnecting the USB card then causing the phone to call the ACTUAL SD card "Storage Card 2" because Opera had already stolen the name.
It did cause a panick at first!
Click to expand...
Click to collapse
What I don't though is that I did this tweak quite some time back and until yesterday all was well.
I connect via USB daily and the same with Opera. Not once did I receive any errors.
Something triggered this all off and I would be grateful to whoever who can explain any reason why yesterday it all went 'pear-shaped' and played up.
Thanks Guys.
Beards
Related
Hi,
I recently installed an app that made my phone go into SAFE MODE -- So I uninstalled the app and realized messaging was gone. So I did the Clear Storage function and started from sctratch.
Oh -- I am using the Dopod ROM with GPS
Now once I started steeing my phone back up again, I noticed my "Memory Card was Locked" message when I directed the email attachments to be stored there. ALSO when I look at the Storage card memory in the SYSTEM/DEVICE INFORMATION screen -- it shows that my old stuff is still on there. But File explorer cannot read them.
ANY SUGGESTIONS?
Thanks in Advance!
diablonyc2 said:
Hi,
I recently installed an app that made my phone go into SAFE MODE -- So I uninstalled the app and realized messaging was gone. So I did the Clear Storage function and started from sctratch.
Oh -- I am using the Dopod ROM with GPS
Now once I started steeing my phone back up again, I noticed my "Memory Card was Locked" message when I directed the email attachments to be stored there. ALSO when I look at the Storage card memory in the SYSTEM/DEVICE INFORMATION screen -- it shows that my old stuff is still on there. But File explorer cannot read them.
ANY SUGGESTIONS?
Thanks in Advance!
Click to expand...
Click to collapse
When you do a "clear storage" it resets your device, but it doesn't erase your external storage card. The best policy is to take out your storage card, save the important files on your PC, then reformat it. Do your "clear storage" hard reset without the card in the device. This way you are sure that you are starting fresh without any old problems hanging around. You can then copy back to your card any important files, but not old messages...this is asking for trouble.
Thanks Matterhorn. I wound up purchasing a card reader and reformating the card. It took a while but I got everything up and running.
Hey everyone,
for some reason, my MiniSD card looks empty all of the sudden.
didn't do anything special.
i just see a Outlook folder, and it had 1.8GB of music and programs.
when i click memory i see 1.8GB of 2GB used.
but i just dont see all my data.
what should i do to repair it?
If you have a card reader remove card from phone and put it in there, computer should see everything, then when you put it back in the phone it ought to be good.
otherwise just remove it reset the phone and then put it back in again, that might just about do it.
rootbit said:
Hey everyone,
for some reason, my MiniSD card looks empty all of the sudden.
didn't do anything special.
i just see a Outlook folder, and it had 1.8GB of music and programs.
when i click memory i see 1.8GB of 2GB used.
but i just dont see all my data.
what should i do to repair it?
Click to expand...
Click to collapse
Well, that didnt work.
i ran StorageTools on it, but then it just deleted the rest of the missing files and gave me the whole miniSD as empty.
so i did a hard reset and reinstalled all my software
and today it happened again
all the data is lost again
what do i do?
I have the same! Once in a while I loose files from my storagecard. I have to reinstall the programs.
I made a copy to my PC, so I can copy back if again I loose files. But I really don't know why this strange behaviour happens.
Maybe it's the card itself?
So its not even just me
anyone else had this issue? found how to solve it? i had it day after day.
do you also have the problem where the card looks like it hasent recovered the space?
It's an old problem. If you use search, it turns up few dozens.
Are you using WM6 or WM5? WM6 reportedly has better driver support for SD(HC).
I'm using WM5.
2GB cards arnt SDHC?
i tried searching but didnt find anything that looks like that problem.
want to help me out with a link?
I have this file loosing problem with WM6 and WM5, but not so often, maybe once or twice a month.
Hmm... it was reported that WM6 would solve this problem but it turned out that it's not true.
Perhaps you guys should try the application called sdsentry, which would save your day.
happened to me a few days ago.. something to do with losing power and killing the file allocation table (or something like that).. I used a program called 'GetDataBack for FAT' and got almost everything back.
MiniSD Data dissapearing workaround
1. Stop ALL programs running from miniSD (plugins, background progs, etc.)
2. Trinity On, remove miniSD card.
3. Soft reset Trinity.
4. Using File Explorer (since this could be the only option available), DELETE the "STORAGE CARD" directory.
4. POWER OFF Trinity.
5. Insert miniSD card
6. POWER ON, voila!
Use it at your own risk, it worked for me just fine.
For Admin: Since thius is a pretty common issue for Trinity owners it may be a good idea to make the message STICKY.
Cheers, Fanelul
Yeah this is a pretty common problem. I had a patriot 2gb nonSDHC card once which had this problem, recurred all the time, changed to kingston and never had it again.
This is probably gonna be your best choice unfortunately.
I had the same issue some days ago with my Trascend 2GB , that's what I did:
1- via a card reader I saved all data in the minisd to a tempdir on my desktop
2- reformatted minisd in FAT
3- copyed all files again from the tempdir to the minisd and reinserted in my Trinity
4- All my files are back again
This help only if you can see your files on the desktop via the card reader..obviously..
Bye
fanelul said:
1. Stop ALL programs running from miniSD (plugins, background progs, etc.)
2. Trinity On, remove miniSD card.
3. Soft reset Trinity.
4. Using File Explorer (since this could be the only option available), DELETE the "STORAGE CARD" directory.
4. POWER OFF Trinity.
5. Insert miniSD card
6. POWER ON, voila!
Use it at your own risk, it worked for me just fine.
For Admin: Since thius is a pretty common issue for Trinity owners it may be a good idea to make the message STICKY.
Cheers, Fanelul
Click to expand...
Click to collapse
fanelul,
how can you delete the "STORAGE CARD" directory since you removed the miniSD card before? As you know when you remove the card the directory disappear from file explorer list..
Bye
I've had this problem twice.
What I did when data diasppears was:
1) soft reset
2) use the file explorer of ppc
3) you should see 'storage card' AND 'storage card2'
4) delete 'storage card' and leave 'storage card2' alone
5) soft reset
6) you should get everything back whe the ppc reads 'storage card2' as the offset storage card when it changes back to 'storage card' minus the '2'
Hope this helps many.
isnt the case
Hey, this isnt the case, sorry.
i dont have Storage card2.
anyway, i just got this thing again
this time i lost all the folders on the miniSD
but the files that were flat on the miniSD are still there
i think ill try buying a new miniSD card.
if that dosnt work ill send the Trinity for repairs.
Hi,
I've same problem since I use a PNY 2 Go sd card.
To solve it quickly I switch off the screen (hard button on the right top), remove and replace mini SD, and it's ok.
No problem with my 1 go....
After my christmas trip I'll replace Wester_Europe map by French_map and burn my 2go card....
I had a similar problem too. But not all the data disappeared from my minisd.
I used to store images taken from the camera in the rootSD/MyDocuments/images.
My Trinity deleted ALL the data inside the MyDocuments directory, and the data inside Windows directory.
This happened after a soft reset. My Trinity was frozen and i had to soft reset through the lower button.
When it turned on again didn't find any of the programs installed.
I had a 4g microsdhc card in the xv6800. Verizon btw.
Had a couple larger programs installed to the storage card.
Decided to upgrade a bit and got 8g microsdhc. Turned off
ppc, copied 4g's files to laptop, then copied to 8g.
Tried using Garmin gps, problem with that as I assume card id
has changed. Couple other card id generated serials did not want
to work either.
So I remove everything from storage, cept for some personal files
etc... And in the process of removing I came up with the brilliant
idea, hmm... new storage card, might as well try out the hard reset
feature and start fresh.
At the beginning everything was fine. I restored pim data with Sprite,
and when I installed Sprite, I installed to the storage card. Install went fine
but after the soft reset, its got default icon, and don't work. So I am thinking, ok, maybe its gotta be installed to the device. Yep that worked.
So I installed some other apps I thought should also go to the device, and they worked as well.
Came to some larger apps, Garmin first, and it works. But it's the only one
that works when I install to the storage card. Any app I have tried to install
to the storage card, after soft reset, has default icon, and won't open.
I searched thru the storage card, win folder, programs folder, my documents just in case, and they are all empty. and yes I am browsing with show all files checked.
Soz its prolly something real simple that I am overlooking. All I know is the
programs that I had installed to the storage card i assume aren't actually installing, cause there are no files, but same program will install to the device
and run/work.
Any takers want to point out my stupidity for me? What I doing/did wrong?
I really have NO clue what the problem is,
BUT,
I had an odd problem with files lost on my 4G card. I stuck it into a good card reader and plugged it into my laptop. I did a 'chkdsk' on it (checked it for errors) and it found a number of lost clusters. I let it repair those, and all was well.
Actually, I believe that when I saw the errors, I copied everything off the card and just reformatted it.
Don't forget the 'safe to remove' button on the PC.
thank ya very much.
done and done and working now.
formatted it using disc management in xp.
all good now.
thanks for pointing out my stupidity.
i forgot this is windows, when in doubt...format. lol
Hi,
What happened
Yesterday when I had more time I started installing some applications on my HTC Touch HD.
I installed:
1).NET Framework 3.5
2) Advanced Configuration
3) Total Commander
4) Gyrator 2
I had already installed IGO 8 a few months ago.
After installing Advanced configuration I tested the IGO and it was working, I had no problem.
However after I installed Gyrator 2 and with Gyrator 2 on I tried to start Igo8, the IGO8 didn't want to start. After further attempts and investigation I came to the conclusion that the SD Card is corrupted.
Symptoms of the SD Card(original one that came in the box with the device):
1)While reading it from PC only the root directory of the card is visible with all the folders inside but I can access only one folder out of 15. for the others I get an error, cannot read from the device...
2) From the HTC touch HD I can even enter all the folders but while accessing some files, not all of them, I get errors saying that the files could not be opened.
3) I had to do many restarts so only two times the first screen that you see after you power-on the device is the "Smart mobility" and then after a few seconds you get the details of the ROM and two other rows in the bottom right corner. So for two times the "Smart mobility was not centered" as well as the bottom right corrner data they were not at their position. However now after 5-10 more power-on power-off manipulation the first screen seems to be ok.
Possible causes as I see it are two:
1) Gyrator 2 and IGO8 do not lik eache other very much, and some how when IGO8 started maybe the orientation of the screen just changed from portrait to landscape. It is just a theory, as I'm not an expert I cannot say if it's correct or not.
2) After installing the Gyrator2 I have somehow unplugged the USB cable while the computer might still have had a connection to the PC. That's ulikelley because I allways do the "Remove USB device" before unplugging, but I did it so many times that I do not remember exactly that time. However I trust my instincts even though I cannot exclude the possibility of an error.
The cause 2) might be realated as well with the usual problem of choosing the action needed when you connect he HTC Touh HD trough the USB cable. It happened many times that an option is preselected(read the Storage card) but I want to actually synchronise the device with ActiveSync, so initially the PC opens the SD card as an external drive and then after I click on the phone to choose the ActiveSync connection it closes the external drive and makes the connection.
Is there a better way to choose between the modes of connectivity to PC, taking into account that when you want to install some software on the device you have to either copy the file on the device itself and start it there or install it on the PC and use ActiveSync to install it as well on the device.
My main question is related with the helthcheck of my HTC Touch HD.
a) Is there a risk that the internal built in flash storage of the device is corrputed as well? I have checked all the files almost with no problems of accessing any of them. It seems ok to me. The only thing that worries me a bit is the problem with the splash screen as I explained it under possible cause 2) which now doesn't seem to appear anymore.
b) is there any other part that I should verify to make sure that my device is ok.
c) Less important, if you could help me find out what happened to make sure that I won'trepeat it again and break the next SD Card.
d) Can I recover/repair the SD Card itself, the data that I had on were not very important I have them on my PC in proportion of 90%. I downloaded some tool from SanDisk called usb-test-tool.exe but it fails to see the card(I think the tool is not the right one), or I shouldn't even bother because there is a risk of having problems afterwards.
Most probably I'll have to buy another SDMicroCard I'll try to buy the same brand maybe for 16GB, I do not know the prices yet.
Sorry for the long pot, but I wanted to give allt he details.
Thanks for your support!
And now most probably I'll have to uninstall the applications that were installed on the SDCard, I hope it will work out and there will be no left-overs in registries or on the filesystem.
coincidence
well. Mine got bricked too yesterday. it was a 16GB sd-card. Only my phone can access it and the data is gone. Data was firts messed up (like chaotic named folders and files) and then disappeared. I can create new folders and files there but it is full of lost chains and clusters (found by mobile apps) and reports the same free space as before (40%) but there are no content visible. When I connect it to laptop either as an disk drive from mobile or directly with sd-adapter I get high cpu usage of interrupts and a frozen usb managment and need to restart.
Hi,
There have been other topics on SD card corruption, then loss :
SD card not shown
HELP ME! Flash has gone wrong
Help! My HD cant find my micro-SD
SD HC_problem
foulke said:
Hi,
There have been other topics on SD card corruption, then loss :
SD card not shown
HELP ME! Flash has gone wrong
Help! My HD cant find my micro-SD
SD HC_problem
Click to expand...
Click to collapse
Yeah but once its bricked it IS bricked. I got my 16G changed thanks to warranty. I actually think I fried it with overheated device.
And people: A L W A Y S B A C K U P Y O U R S T U F F !!!!
darfri said:
well. Mine got bricked too yesterday. it was a 16GB sd-card. Only my phone can access it and the data is gone. Data was firts messed up (like chaotic named folders and files) and then disappeared. I can create new folders and files there but it is full of lost chains and clusters (found by mobile apps) and reports the same free space as before (40%) but there are no content visible. When I connect it to laptop either as an disk drive from mobile or directly with sd-adapter I get high cpu usage of interrupts and a frozen usb managment and need to restart.
Click to expand...
Click to collapse
Same happened to me with my 16gb Sandisk card.
Card reader said is was write protected and could not format using SDFormatter.
Solution after a search found on the Raphael forum was to download http://www.cnetx.com/format/download.asp and install to main memory.
Success !
Then I could read it and formatted again with SDFormatter
Hope this helps
r
Andrew
i have a weird problem with my mini sd card. Every time i format, there is always two files that come up, autorun and svchost. The text in autorun is:
[autorun]
shell=verb
open=svchost.exe
action=Open folder to view files
shell\open=Open
icon=%SystemRoot%\system32\SHELL32.dll,4
no matter what i do, it keeps coming up. Even done a hard reset but still same problem.
Noticed those files in sd card couple days ago.
also the only thing so far i noticed it affects is that you cannot open removable device from my computer, says it cannot open it, but it opens when you go thru start->run.
anyone else have this problem and know a solution
thanks
Do you format the card with your computer? The svchost file with autorun.exe are often used by viruses on a Windows Computer. Try to scan your pc. Maybe this solves the problem.