Help! Storage Card Locked Message?? - P3600 General

Hi,
I recently installed an app that made my phone go into SAFE MODE -- So I uninstalled the app and realized messaging was gone. So I did the Clear Storage function and started from sctratch.
Oh -- I am using the Dopod ROM with GPS
Now once I started steeing my phone back up again, I noticed my "Memory Card was Locked" message when I directed the email attachments to be stored there. ALSO when I look at the Storage card memory in the SYSTEM/DEVICE INFORMATION screen -- it shows that my old stuff is still on there. But File explorer cannot read them.
ANY SUGGESTIONS?
Thanks in Advance!

diablonyc2 said:
Hi,
I recently installed an app that made my phone go into SAFE MODE -- So I uninstalled the app and realized messaging was gone. So I did the Clear Storage function and started from sctratch.
Oh -- I am using the Dopod ROM with GPS
Now once I started steeing my phone back up again, I noticed my "Memory Card was Locked" message when I directed the email attachments to be stored there. ALSO when I look at the Storage card memory in the SYSTEM/DEVICE INFORMATION screen -- it shows that my old stuff is still on there. But File explorer cannot read them.
ANY SUGGESTIONS?
Thanks in Advance!
Click to expand...
Click to collapse
When you do a "clear storage" it resets your device, but it doesn't erase your external storage card. The best policy is to take out your storage card, save the important files on your PC, then reformat it. Do your "clear storage" hard reset without the card in the device. This way you are sure that you are starting fresh without any old problems hanging around. You can then copy back to your card any important files, but not old messages...this is asking for trouble.

Thanks Matterhorn. I wound up purchasing a card reader and reformating the card. It took a while but I got everything up and running.

Related

MiniSD data disappeared, HELP!

Hey everyone,
for some reason, my MiniSD card looks empty all of the sudden.
didn't do anything special.
i just see a Outlook folder, and it had 1.8GB of music and programs.
when i click memory i see 1.8GB of 2GB used.
but i just dont see all my data.
what should i do to repair it?
If you have a card reader remove card from phone and put it in there, computer should see everything, then when you put it back in the phone it ought to be good.
otherwise just remove it reset the phone and then put it back in again, that might just about do it.
rootbit said:
Hey everyone,
for some reason, my MiniSD card looks empty all of the sudden.
didn't do anything special.
i just see a Outlook folder, and it had 1.8GB of music and programs.
when i click memory i see 1.8GB of 2GB used.
but i just dont see all my data.
what should i do to repair it?
Click to expand...
Click to collapse
Well, that didnt work.
i ran StorageTools on it, but then it just deleted the rest of the missing files and gave me the whole miniSD as empty.
so i did a hard reset and reinstalled all my software
and today it happened again
all the data is lost again
what do i do?
I have the same! Once in a while I loose files from my storagecard. I have to reinstall the programs.
I made a copy to my PC, so I can copy back if again I loose files. But I really don't know why this strange behaviour happens.
Maybe it's the card itself?
So its not even just me
anyone else had this issue? found how to solve it? i had it day after day.
do you also have the problem where the card looks like it hasent recovered the space?
It's an old problem. If you use search, it turns up few dozens.
Are you using WM6 or WM5? WM6 reportedly has better driver support for SD(HC).
I'm using WM5.
2GB cards arnt SDHC?
i tried searching but didnt find anything that looks like that problem.
want to help me out with a link?
I have this file loosing problem with WM6 and WM5, but not so often, maybe once or twice a month.
Hmm... it was reported that WM6 would solve this problem but it turned out that it's not true.
Perhaps you guys should try the application called sdsentry, which would save your day.
happened to me a few days ago.. something to do with losing power and killing the file allocation table (or something like that).. I used a program called 'GetDataBack for FAT' and got almost everything back.
MiniSD Data dissapearing workaround
1. Stop ALL programs running from miniSD (plugins, background progs, etc.)
2. Trinity On, remove miniSD card.
3. Soft reset Trinity.
4. Using File Explorer (since this could be the only option available), DELETE the "STORAGE CARD" directory.
4. POWER OFF Trinity.
5. Insert miniSD card
6. POWER ON, voila!
Use it at your own risk, it worked for me just fine.
For Admin: Since thius is a pretty common issue for Trinity owners it may be a good idea to make the message STICKY.
Cheers, Fanelul
Yeah this is a pretty common problem. I had a patriot 2gb nonSDHC card once which had this problem, recurred all the time, changed to kingston and never had it again.
This is probably gonna be your best choice unfortunately.
I had the same issue some days ago with my Trascend 2GB , that's what I did:
1- via a card reader I saved all data in the minisd to a tempdir on my desktop
2- reformatted minisd in FAT
3- copyed all files again from the tempdir to the minisd and reinserted in my Trinity
4- All my files are back again
This help only if you can see your files on the desktop via the card reader..obviously..
Bye
fanelul said:
1. Stop ALL programs running from miniSD (plugins, background progs, etc.)
2. Trinity On, remove miniSD card.
3. Soft reset Trinity.
4. Using File Explorer (since this could be the only option available), DELETE the "STORAGE CARD" directory.
4. POWER OFF Trinity.
5. Insert miniSD card
6. POWER ON, voila!
Use it at your own risk, it worked for me just fine.
For Admin: Since thius is a pretty common issue for Trinity owners it may be a good idea to make the message STICKY.
Cheers, Fanelul
Click to expand...
Click to collapse
fanelul,
how can you delete the "STORAGE CARD" directory since you removed the miniSD card before? As you know when you remove the card the directory disappear from file explorer list..
Bye
I've had this problem twice.
What I did when data diasppears was:
1) soft reset
2) use the file explorer of ppc
3) you should see 'storage card' AND 'storage card2'
4) delete 'storage card' and leave 'storage card2' alone
5) soft reset
6) you should get everything back whe the ppc reads 'storage card2' as the offset storage card when it changes back to 'storage card' minus the '2'
Hope this helps many.
isnt the case
Hey, this isnt the case, sorry.
i dont have Storage card2.
anyway, i just got this thing again
this time i lost all the folders on the miniSD
but the files that were flat on the miniSD are still there
i think ill try buying a new miniSD card.
if that dosnt work ill send the Trinity for repairs.
Hi,
I've same problem since I use a PNY 2 Go sd card.
To solve it quickly I switch off the screen (hard button on the right top), remove and replace mini SD, and it's ok.
No problem with my 1 go....
After my christmas trip I'll replace Wester_Europe map by French_map and burn my 2go card....
I had a similar problem too. But not all the data disappeared from my minisd.
I used to store images taken from the camera in the rootSD/MyDocuments/images.
My Trinity deleted ALL the data inside the MyDocuments directory, and the data inside Windows directory.
This happened after a soft reset. My Trinity was frozen and i had to soft reset through the lower button.
When it turned on again didn't find any of the programs installed.

Storage Card Issue

I had a 4g microsdhc card in the xv6800. Verizon btw.
Had a couple larger programs installed to the storage card.
Decided to upgrade a bit and got 8g microsdhc. Turned off
ppc, copied 4g's files to laptop, then copied to 8g.
Tried using Garmin gps, problem with that as I assume card id
has changed. Couple other card id generated serials did not want
to work either.
So I remove everything from storage, cept for some personal files
etc... And in the process of removing I came up with the brilliant
idea, hmm... new storage card, might as well try out the hard reset
feature and start fresh.
At the beginning everything was fine. I restored pim data with Sprite,
and when I installed Sprite, I installed to the storage card. Install went fine
but after the soft reset, its got default icon, and don't work. So I am thinking, ok, maybe its gotta be installed to the device. Yep that worked.
So I installed some other apps I thought should also go to the device, and they worked as well.
Came to some larger apps, Garmin first, and it works. But it's the only one
that works when I install to the storage card. Any app I have tried to install
to the storage card, after soft reset, has default icon, and won't open.
I searched thru the storage card, win folder, programs folder, my documents just in case, and they are all empty. and yes I am browsing with show all files checked.
Soz its prolly something real simple that I am overlooking. All I know is the
programs that I had installed to the storage card i assume aren't actually installing, cause there are no files, but same program will install to the device
and run/work.
Any takers want to point out my stupidity for me? What I doing/did wrong?
I really have NO clue what the problem is,
BUT,
I had an odd problem with files lost on my 4G card. I stuck it into a good card reader and plugged it into my laptop. I did a 'chkdsk' on it (checked it for errors) and it found a number of lost clusters. I let it repair those, and all was well.
Actually, I believe that when I saw the errors, I copied everything off the card and just reformatted it.
Don't forget the 'safe to remove' button on the PC.
thank ya very much.
done and done and working now.
formatted it using disc management in xp.
all good now.
thanks for pointing out my stupidity.
i forgot this is windows, when in doubt...format. lol

Opera Changing Storage Card name to Storage Card 2

Guys,
Am in need of some desperate help.
Up until tonight all was well with the HD2.
However, for some unknown reason every time I now launch Opera it changes the name of my Storage Card to Storage Card 2 which you then can not enter in Resco Explorer and in place creates a new folder named Storage Card and places 2 folders inside:-
OperaCache (with 264 files within)
Inbox.numbers (and inside this folder Mail Attachements which is empty).
What this means is because it has changed the name of the Storage Card I can't access any of my installed applications/photos/videos/music...nothing.
If you then soft-reset, as it is rebooting it is looking for items in the content of Storage Card but Storage Card was renamed and the consequence is the phone doesn't boot up correctly.
The only 'tempory remedy' (until I next use Opera) is when the Phone has finished rebooting, I launch Resco Explorer, Rename Storage Card to Storage Card 3 and again soft-reset.
This time when the Phone reboots Storage Card 2 (the real Storage Card) is renamed back to it's original name of Storage Card and the Phone boots up normally.
All seems well until I then load Opera again ........ which then goes through the whole process over again in renaming Storage Card and creating another.. etc. etc.
Help... help... help.
This is more than annoying as it is effecting my work and here we are talking patient care which is of paramount importance to me.
Note:
I have tried rolling back the system to a previous Backup point using Sprite Backup but no matter which Restore file I select once the system reboots to this restore point and I again launch Opera it does the same thing over again.
I got the same, it was because I had changed the cache location to the SD Card, but when I had the device plugged in via USB in Disk Mode it stops the phone seeing the SD Card.
I just moved the cache back to the phone, and the problem goes away!
stratplayer said:
I got the same, it was because I had changed the cache location to the SD Card, but when I had the device plugged in via USB in Disk Mode it stops the phone seeing the SD Card.
I just moved the cache back to the phone, and the problem goes away!
Click to expand...
Click to collapse
Are you talking about Cache Directory4 in the Opera:Config?
Edited:
Many thanks statplayer. Initial findings show this may have cured the problem.
I'll be doing some testing later tomorrow when I get up (bed time now).
The only thing I am totally baffled about is I did the Cache Directory switch to Storage Card quite some time back.
Since then I have used Opera and the rest of the system every day without any problems.
What's made it all of a sudden decide it wanted to react today and not on the day I first changed the Cache area???????
Obviously this I would love to know.
Anyway, if this has cured the problem I owe you a debt of thanks.
Will report back tomorrow.
In the meantime ~ Guys if you can offer any further advice on why it's not played up before, please chip in.
Beards
I had exactly the same issue in the situation specified regarding changing the Opera cache location to the storage card, accessing Opera with the USB plugged in (not activesync mode), and disconnecting the USB card then causing the phone to call the ACTUAL SD card "Storage Card 2" because Opera had already stolen the name.
It did cause a panick at first!
morpheus1982 said:
I had exactly the same issue in the situation specified regarding changing the Opera cache location to the storage card, accessing Opera with the USB plugged in (not activesync mode), and disconnecting the USB card then causing the phone to call the ACTUAL SD card "Storage Card 2" because Opera had already stolen the name.
It did cause a panick at first!
Click to expand...
Click to collapse
What I don't though is that I did this tweak quite some time back and until yesterday all was well.
I connect via USB daily and the same with Opera. Not once did I receive any errors.
Something triggered this all off and I would be grateful to whoever who can explain any reason why yesterday it all went 'pear-shaped' and played up.
Thanks Guys.
Beards

Post-root USB errors, anyone?

I finally got around to rooting mine earlier today..
Ever since, I can't get either of my computers (both Mac and PC) to recognize the phone for mounting the SD card. It charges fine via USB but is impossible to mount as USB storage. Any ideas on this?
Maybe a driver issue?
I thought that originally. But if that were the case, I wouldn't have been able to connect to them previously (no changes in drivers on the computers) or been able to connect to complete the root process. I'm kind of at a loss for ideas right now.
hmm strange... I'm a android newbie so i don't think i can help passed driver
Method?
myz06vette said:
I finally got around to rooting mine earlier today..
Ever since, I can't get either of my computers (both Mac and PC) to recognize the phone for mounting the SD card. It charges fine via USB but is impossible to mount as USB storage. Any ideas on this?
Click to expand...
Click to collapse
Hey what method did you use to root? If you can mount your internal storage but not your sdcard, can your phone read your sd card when the phone is booted normally? Perhaps you damaged your slot?
dreamersipaq said:
Hey what method did you use to root? If you can mount your internal storage but not your sdcard, can your phone read your sd card when the phone is booted normally? Perhaps you damaged your slot?
Click to expand...
Click to collapse
exactly what i was thinking, but myz06vette are you able to view content from your sd card using just your phone? ex: music, movies or pictures?
Yes, I can view content on my SD card and internal phone storage on the phone itself using Root Explorer or ASTRO. I didn't use the method that required me to pull the SD card out. I can play music stored on the card and view all my photos, so I know its reading okay. I even took the SD card out and put it in a memory card reader and it hooked up to the computer fine.. mounted right away. Just won't mount through the phone.
myz06vette said:
Yes, I can view content on my SD card and internal phone storage on the phone itself using Root Explorer or ASTRO. I didn't use the method that required me to pull the SD card out. I can play music stored on the card and view all my photos, so I know its reading okay. I even took the SD card out and put it in a memory card reader and it hooked up to the computer fine.. mounted right away. Just won't mount through the phone.
Click to expand...
Click to collapse
The development.apk packaged in many Dream/G1 ROMs has an option to scan for media. Try that
BTW, *#*#4636#*#* also works from the dialer to pull up phone/radio options, which will allow you to switch between cdma auto (PRL) --> cdma only -->> ev-do only. The latter two options should save you battery!
Thanks for the advice! I updated to CDMA-only right when I got the phone.. so I honestly can't say whether or not its saving me battery since I don't know what it was like set to CDMA auto PRL hahaa.
I tried installing the Dev Tools apk you attached, but each time I do, it says "Application not installed" with the yellow !triangle next to it.
myz06vette said:
Thanks for the advice! I updated to CDMA-only right when I got the phone.. so I honestly can't say whether or not its saving me battery since I don't know what it was like set to CDMA auto PRL hahaa.
I tried installing the Dev Tools apk you attached, but each time I do, it says "Application not installed" with the yellow !triangle next to it.
Click to expand...
Click to collapse
Sorry, man -- that .apk was from an Eclair build -- try the new one I put up -- it's from an Espresso build, I just installed in on my DI -- all good
Hah alright fair enough. This one loaded fine.
Checking it out now... will report back. Thanks!
Half of the options in the app force close.
Media scanner loaded, but isn't helping me mount the sd card to my computer.
Any more ideas?
myz06vette said:
Half of the options in the app force close.
Media scanner loaded, but isn't helping me mount the sd card to my computer.
Any more ideas?
Click to expand...
Click to collapse
So you've checked your settings in "Connect to PC" -- perhaps your "always ask" option is cleared and it's set to HTC Sync, for example? What do you get in the SDcard/Storage menu? Any stats for the SDcard? What happens when you elect to eject it in that menu?
Storage menu shows total space and free space like it should.
Connect to PC is currently set to Ask me everytime.. option for Disk Drive selected just to try and force it to mount..
Removed SD card.. did battery pull reset.. still nothing.
myz06vette said:
Storage menu shows total space and free space like it should.
Connect to PC is currently set to Ask me everytime.. option for Disk Drive selected just to try and force it to mount..
Removed SD card.. did battery pull reset.. still nothing.
Click to expand...
Click to collapse
That's frustrating. You might have to back-up your sdcard data on a PC and re-format the card, then copy the data back. I'm assuming you have a card reader.
I hadn't thought until just now to try another card. I've got a few sitting around here somewhere. I'll try that before taking the time to backup almost a full 16 gigs of stuff, format, then restore it all.
myz06vette said:
Storage menu shows total space and free space like it should.
Connect to PC is currently set to Ask me everytime.. option for Disk Drive selected just to try and force it to mount..
Removed SD card.. did battery pull reset.. still nothing.
Click to expand...
Click to collapse
Do you have some sort of app killer/task manager auto killing the obex service? Ive noticed i have problems when it isnt running, but when it is running it kills battery like mad. Try going to settings>applications>running services and see if its running next time you try to mount. It should show up under calendar. Hope this helps.
P.S. I only let this service run when i need to plug into my pc, since it seems to keep the phone from being able to "sleep" properly. So if you have something killing it, or the calendar app has been removed that may have a part in your problem.

Fryo I800 installation help!

Ok So I am here because I've posted in other places in these forums with no replies yet, So it would be better to create a thread specific to my problem.
I have an Omnia 2, thinking of acquiring the Fryo 2.2 OS, not specific about wether I want what version but here are the problems I come across before being able to install it.
1- plugging in my phone under Settings -> My storage will not show my storage on my computer, having the external SD option will show my 16GB SD card.
2- Backing up. How do I back up my storage if I can't see it on my computer? When I turn on active sync a blank storage appears other than my SD card (assuming its the internal storage) but the size seems rather small (167MB). I've been reading peoples' posts and I'm supposed to have around 2GB I believe, and either way the files I'm trying to put inside for the android OS don't seem to fit there.
3- Partitions? How can I set those up for both the internal and external storage? Is there a program or feature to do so? My SD card under properties says FAT-32 so I'm not sure on how to do it IF I need to.
4- Using a W7 computer, so that knocks off any ubuntu installations, and also link is broken for Almars Beta 1 file that I was thinking of using for an SD installation.
Any help would be appreciated, I've had this phone since 2009 and I'm really hoping I can come across some help to make it work since I do want to keep this phone for a bit longer before I spend more money on a different cellphone!
Thank you!
Try out the new CyanogenMod from the link below.
http://windows.modaco.com/topic/346446-cyanogenmod-beta1-omnia-2-updated-02122011/
It has the SD Card auto installer, try it..
Back up data on your SD card first and then format your SD card within the phone and then use auto installer to install it.
As you said your computer wont detect the My Storage, try the steps below..
Transfer your data from My Storage to external SD Card, then connect your phone to computer using My Storage mode in settings.
Download Mini Tool partition wizard and format your My Storage (Mini tool partition will be able to see your My Storage even though your computer doesn't).
After format, your computer should be able to detect My Storage.
Now copy the downloaded android files to My Storage and run the auto installer as instructed in the ReadMe file inside the download package.
PS: Don't forget to backup the data on SD Card to your computer
Hope this helps
Ok so what you meant by taking things from my storage is going to file explorer and basically copying everything from the "my device" to the SD card?
Just want to make sure because if it doesent work then I haven't gotten anything backed up right.
Went to file explorer -> copied everything in the top folder which is application date, connMgr, doc and setttings, program files etc. is this all thats needed basically?
Thanks
P.S some of the things I tried taking like global.txt or exe couldn't be copied because of violations or some weird error, is it alright not to have those?
Update: My storage is still not revealed by the mini tool partition program, went under usb settings -> my storage and refreshed disk information, nothing shows up ugh it might be impossible for me to do this after all....
nobody can help me in regards to this? well then I guess a new cellphone is in order
grrrrr I should've gone with a iphone 3G or BB 9700 at the time instead...
ClaudioPerez said:
Ok so what you meant by taking things from my storage is going to file explorer and basically copying everything from the "my device" to the SD card?
Just want to make sure because if it doesent work then I haven't gotten anything backed up right.
Went to file explorer -> copied everything in the top folder which is application date, connMgr, doc and setttings, program files etc. is this all thats needed basically?
Thanks
P.S some of the things I tried taking like global.txt or exe couldn't be copied because of violations or some weird error, is it alright not to have those?
Update: My storage is still not revealed by the mini tool partition program, went under usb settings -> my storage and refreshed disk information, nothing shows up ugh it might be impossible for me to do this after all....
Click to expand...
Click to collapse
I guess you will have to reflash the ROM again since your problem seems to be unsolvable. My suggestions is to flash a stock 6.5.3 ROM before you transfer the auto SD installer.

Resources