Database Users

My Cruise is died

I have installed Hard SPL.
Before to install new rom I use MTTY:
task 32
task 28
task 2A
info 8
task 8
after this, the Cruise don't restart.
I think it's died.
It is possible to recover it?
The Pc recognize the Cruise as Data Interface and try to install a driver that I haven't.
Please help me, if possible....

Same thing happened to another user in Italy, he tried every solution but no one worked, you have to send your Polaris to the assistence.
I think Mtty doesn't work with the Polaris.

This is dumb! Why did you use mtty? Flash HardSPL and then flash any ROM you like. Why did you ruin your Cruise?
Do you still get to the bootloader? (Hold Camera and push Reset pin with stylus)
Try to flash a ROM from SD-Card: http://forum.xda-developers.com/showpost.php?p=1941363&postcount=6

I hope you would be more lucky 'cause the other user tried also to flash from MicroSD but nothing

He erased the bootloader then? Cleared the whole ROM? Why do ppl do that? There is NO INSTRUCTION give in either the HardSPL nor the HardSPL+Unlocker thread to do that.
You could play around with the PC Emulator and then transfer the bootloader onto the device, but it's very complicated and a novice user won't be successful.

Another problem was the unrecognizement of USB port, i think Mtty erased many parts of the flash memory.

I'm a stupid... I think to use MTTY before to flash rom so I have my Cruise to a clear format status. (Excuse for my bad english)
I hope this is as an example for others....
Tomorrow I'll run to assistance, I'll hope the Service will repair the Cruise in guarantee....

Don't say them what you done, simply say it doesn't work anylonger.

Dude you're a member of this forum since 2005, didnt the idea that a PPC is completely different than a regular PC ever cross your mind? There is no such thing as a key combination for example which will boot your Vista in an original and clean state
However, only follow instructions given in the thread and nothing more, nothing less.
I highly doubt it that theyll repair it on warranty, HTC put warnings all over the place, the website and every ROM Updater that the actions you do are on your own risk. And ppl replacing the bootloader with a hacked one (altho it probably got erased as well) isn't really what they had in mind... But keep us updated!
Edit: hell yeah, dont tell anything about what you did! You synched it with your PC as usual. You left it connected over the night to charge and this morning there was a driver search dialog on your PC's screen and the device was laying next to the PC, dead, still connected to the USB port...

schaggo said:
You could play around with the PC Emulator and then transfer the bootloader onto the device, but it's very complicated and a novice user won't be successful.
Click to expand...
Click to collapse
I have installed WM6 Pc Emulator on my Pc, I use it to try a program, but the problem is:
- the unrecognizement of USB port
- how transfer the bootloader onto the device
However...Thanks at all and excuse for my bad english...

Never mind, your English is rather good compared to what you can read on this board I'm not a native speaker either, so I don't care anyway.
I don't know those mtty commands, but I guess you wiped the WHOLE memory unit, meaning everything, including bootloader and the very basic stuff. So your Polaris is nothing more than some electronical components in a nice case.
However, I'd go to the support and lie, just lie...

However.... If someone have a solution I can try to test it....
Thanks

Did you already try that?
http://forum.xda-developers.com/showpost.php?p=1983845&postcount=4
Kill ActiveSync/Windows Mobile Device Center. Now when you connect your Polaris, does it ask for a driver you dont have or does it display Unrecognized/Unknown device? If asks for a driver, try browsing to the ActiveSync/WMDC directory and look in there for a driver. Then continue as instructed in the post.

Your device is really dead
http://forum.xda-developers.com/showthread.php?t=371567&highlight=bad+block
Post 5.

This problem has happened to me. Unfortunately it needs to bring him/it in assistance.
Hi Batista

fktsndr said:
http://forum.xda-developers.com/showthread.php?t=371567&highlight=bad+block
Post 5.
Click to expand...
Click to collapse
I have read the post....
Only solution.... The assistance...
Thanks at All

To me has happened Friday, i have been fortunate that were not passed
10 days, and brings it in the shop where I have purchased him and they have it to me replaced

robert_io said:
This problem has happened to me. Unfortunately it needs to bring him/it in assistance.
Hi Batista
Click to expand...
Click to collapse
Hi Roby

Edit: hell yeah, dont tell anything about what you did! You synched it with your PC as usual. You left it connected over the night to charge and this morning there was a driver search dialog on your PC's screen and the device was laying next to the PC, dead, still connected to the USB port...[/QUOTE]
hehe, good advice. it worked for a friend of mine, he gave a similar story a year ago when he messed up a device by not following instructions when installing a custom rom.
I'm feeling for ya man, it sucks being without a phone, especially when you just got a new one and it dies! Good luck, I'll be hoping that you get the situation resolved.

michaelangel said:
I have installed Hard SPL.
Before to install new rom I use MTTY:
task 32
task 28
task 2A
info 8
task 8
after this, the Cruise don't restart.
I think it's died.
It is possible to recover it?
The Pc recognize the Cruise as Data Interface and try to install a driver that I haven't.
Please help me, if possible....
Click to expand...
Click to collapse
set 16 0
INTER
task 8
INTER

Updating Xda Orbit To Wm6.1

Hi guys,
I'm a newbie to the forum and for starters I want to apologise if I'm in the wrong section!
My question:- I want to upgrade WM6 to WM6.1 with the cube effect, what I want to know is where to find the right ROM? My ROM version is 3.4.
If I'm missing anything, can someone please let me know so I can update you guys!
Thanks in advance!

hello,
i've tested a few of the new roms thats floating around on this forum and so far for me the best has been the Ooops Black rom,,
http://forum.xda-developers.com/showthread.php?t=401062
i had to unlock my CID first using the USPL program and once i'd done that i could flash the custom rom,.
http://forum.xda-developers.com/showthread.php?t=308242
there's loads of really good roms available so just test until you find the one thats good for you.
Good Luck

i've unlocked the CID and downloaded the new ROM, but when i run the exe file that us ARTEMIS CUSTOMRUU error comes "the application failed to initialize properly (0x0000135)" now what to do?? how to run the exe file???

Are you using windowsXP??
i couldn't flash it with vista but when i used my laptop that had windows XP on and ran active sync to sync the device it worked no problem..
you have to have it sync'd with active sync.
hope this helps!

sometimes i find that if i put the device in to boot loader it works
so try update, it fails, stick device in to bootloader mode an try again.

thanks you very much

the error came on my pc becuse it did'nt had .Net framework installed..
after installin it everything went smoothly...
I have flashed my orbit with Oops Black ROM, although its very fast,but it has several bugs!! are there any better ROM's floating in this forum?? and if i want to restore my original Orbit WM6.0 OS what shud i do???

what type of bugs have you noticed?
mines running perfect!
yeah there's loads of roms available in the Windows Mobile 6 section of the Artemis forum.
you should have no problem upgrading to any rom available now.

@KevandLynds
Here are some bugs which i found
-> When using mouse mode, the pointer gets disappeared after sometime.
-> When Sliding your finger upwards (like when u wanna start that touchflo3D cube) an error comes and you have to restart the phone
-> Unable to view videos in Picture and Video tool.. although u can view pictures.
-> Cannot add menu items.

some of those are touch flo problems, 6.1 by its self it very good in my opinion, dont have any issues except that if i do a soft rest whilst plugged in to and synced with a PC it wont sync afterwards, need to rest unplugged, bizzar but doesnt happen to often

Guys I'm geting a 270 error.
I've hard reset the artemis and tried it, still doesn't make a difference!
Any ideas?
Thanks in advance guys

KevandLynds said:
hello,
i've tested a few of the new roms thats floating around on this forum and so far for me the best has been the Ooops Black rom,,
http://forum.xda-developers.com/showthread.php?t=401062
i had to unlock my CID first using the USPL program and once i'd done that i could flash the custom rom,.
http://forum.xda-developers.com/showthread.php?t=308242
there's loads of really good roms available so just test until you find the one thats good for you.
Good Luck
Click to expand...
Click to collapse
must be the biggest piece of crap sofware yet stops your phone working and cant put any programs on phone avoid this one

MDA Pro Doesn't turn on,please help!

Hello!
I have a huge problem!I tried to update the rom of my MDA Pro,but during the process some kind of error occurred,and the installer tried to recover the old rom.It said that I have to reset the device.I did it,but after that the program just quit and the device still didn't boot up.I am starting to panic,did I just kill my PDA?
Please help guys,any advice is greatly appreciated!
Clewer

I tried a method with MTTY,but I ran into problems again.
MTTY 1.42 doesn't show USB port,but I don't know why.I even uninstalled activesync,and the PDA is connected to the computer.I hope it isn't a brick yet!

Success!Now trying to install a WM 6.1 ROM,40%.I hope it works!

I can't believe it!IT WOOORKS!THANKS TO EVERYONE ON THIS SITE WHO PROVIDED INFORMATION ABOUT MTTY!!

Nice thread!
This is a nice thread.
Started,contributed(except me)and almost closed by the same guy.
Mods please close it.
Orb seems busy.
No hard feelings,I almost did the same but I read wiki more.

Vogue refuse to flash a new rom

Hi all i try to flash wm6.5 rom to Vogue every time i have (error 270).
I try with different rom but same problem even when i try to unlocked with Vogue_unlocker_MFG_2.31 i have ( error 260).
It was wm6 before then i change it to wm6.1.

so 77 said:
Hi all i try to flash wm6.5 rom to Vogue every time i have (error 270).
I try with different rom but same problem even when i try to unlocked with Vogue_unlocker_MFG_2.31 i have ( error 260).
It was wm6 before then i change it to wm6.1.
Click to expand...
Click to collapse
Follow my upgrading guide. And just to be sure, re-download the unlocker. Also, try to use a windows XP computer to do this.
Good luck.

Hello my friend thanks for your help i re-downloaded the unlock and i have same problem.
Just when it says ( disconnect and reconnect ) i think i do it in wrong way can you please Explain it to me how and where to do that, thank you again.

so 77 said:
Hello my friend thanks for your help i re-downloaded the unlock and i have same problem.
Just when it says ( disconnect and reconnect ) i think i do it in wrong way can you please Explain it to me how and where to do that, thank you again.
Click to expand...
Click to collapse
You literally need to unplug the phone and then plug it back in... there is nothing special about that step
I would suggest that you read the whole guide first and try to make some sense out of it before proceeding as you may end up bricking your device otherwise.

HTC Wildfire ROOT problem

hi everyone, first of all happy new year..
I have bought a Wildfire for my brother, I have tried to Root the phone by using the instructions on this website but I couldnt manage to root it...
Unrevoked software starts to root but at the end it says "Internal error: Am reported error starting service"
What should i do to solve this problem.. Thanks
Android 2.1 is installed and simlock free and unbranded
Using Unrevoked 3.3

I have exactly the same problem

If u turn of phone n restart n restart unrevoked make sure u have phone. On debugging also u may have to install the drivers on ur PC/laptop easyest way download HTC sync install all restart comp uninstall HTC sync connect phone go to device manager n plug in phone then see if it reconise ur phone will come up under android as my HTC the restart unrevocked shud. Work a dream
Sent from my HTC Wildfire using XDA App

If confused with wat I put I can. Break it down if u would like
Sent from my HTC Wildfire using XDA App

daddyspud said:
If u turn of phone n restart n restart unrevoked make sure u have phone. On debugging also u may have to install the drivers on ur PC/laptop easyest way download HTC sync install all restart comp uninstall HTC sync connect phone go to device manager n plug in phone then see if it reconise ur phone will come up under android as my HTC the restart unrevocked shud. Work a dream
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
will u tell these step by step and by giving more detail please?

Yh. Sure give me ten to get laptop bud
Sent from my HTC Wildfire using XDA App

1---- install htc sync from this web link
http://www.htc.com/hk-en/SupportViewNews.aspx?dl_id=982&news_id=712
go to bottom of the page and download
2--- install htc sync once installed restart computer/laptop once restarted connect phone
and go to device manager on ur pc ( start- search- device manager ) and at the top u should see android and underneeth it will say my htc if u see this on device manager u have the wildfire driver installed.
3-- uninstall the htc sync dont worry the driver will stay installed on ur pc
4--- once u have uninstalled go to ur wildfire go to setting-applications - development and tick udb debbugging
5-- connect phone to pc and run unrevoked and it should work perfect.
this is the way i had to do it took me a few days to figure it out but this will do the trick
any more help dont hessitate to ask

Thanks i will try this now and gonna inform you

sagorap said:
Thanks i will try this now and gonna inform you
Click to expand...
Click to collapse
no prob sud work a dream

I have successfully rooted. I tried another way before your instruction..
I was using Unrevoked 3.3 then I have tried Unrevoked 3.21 and DONE...
THankks for your helps anyway
So I dont have market installed on Wildfire.. Which ROM do you prefer

sagorap said:
I have successfully rooted. I tried another way before your instruction..
I was using Unrevoked 3.3 then I have tried Unrevoked 3.21 and DONE...
THankks for your helps anyway
So I dont have market installed on Wildfire.. Which ROM do you prefer
Click to expand...
Click to collapse
fear enuf lol well if ur goin to be doin some hack etc like adb shell if ur into that u need the htc driver so remember to just donwload htc sync and uninstall it after ur done much easyer than harder way lol....
erm there a few good roms out there at the min most popular at the min is the wildpuzzle version 7
ps before u install any roms remember to do android backup in recovery just incase ur phone messis up

daddyspud said:
fear enuf lol well if ur goin to be doin some hack etc like adb shell if ur into that u need the htc driver so remember to just donwload htc sync and uninstall it after ur done much easyer than harder way lol....
erm there a few good roms out there at the min most popular at the min is the wildpuzzle version 7
ps before u install any roms remember to do android backup in recovery just incase ur phone messis up
Click to expand...
Click to collapse
thanks again I actually have HTC Desire I install 1 one rom each week But rooting wildfire made me sick at last i managed it too
I have downloaded wildpuzzle 7

sagorap said:
thanks again I actually have HTC Desire I install 1 one rom each week But rooting wildfire made me sick at last i managed it too
I have downloaded wildpuzzle 7
Click to expand...
Click to collapse
ok fear enuf ur used to flashing etc coolio injoy

Have you installed the HBOOT USB Driver before you use unrevoked3?
Uninstall HTC Sync (Important)
Download driver and extract it.
You need to turn your phone into HBOOT (Hold power button)
Connect it with a computer with USB cable
Go to device manager, select 'Android 1.0'
Right-click, select update driver
Select the driver route to the place you've extracted the driver (e.g. D:\Wildfiredriver\)
Launch reflash package after done.

Hii All., happy new year.
I have a same problem with my wildfire when i try to root it. the error absolutly same with sagorap, "Internal error: Am reported error starting service". i've done do step by step from that daddyspud tell but the problem still same.
can you help me to fix this problem ? what should i do ?

tedot said:
Hii All., happy new year.
I have a same problem with my wildfire when i try to root it. the error absolutly same with sagorap, "Internal error: Am reported error starting service". i've done do step by step from that daddyspud tell but the problem still same.
can you help me to fix this problem ? what should i do ?
Click to expand...
Click to collapse
Try with Unrevoked 3.21:
http://downloads.unrevoked.com/recovery/3.21/reflash_package.exe

Oh Dear
My firmware is far to new for me to ROOT

i can't download the file, can u help me?
but i have download a new unrevoked from the site, but its still show a same problem.

tedot said:
i can't download the file, can u help me?
but i have download a new unrevoked from the site, but its still show a same problem.
Click to expand...
Click to collapse
its work Thanks kris. ^^