Hello!
I have a huge problem!I tried to update the rom of my MDA Pro,but during the process some kind of error occurred,and the installer tried to recover the old rom.It said that I have to reset the device.I did it,but after that the program just quit and the device still didn't boot up.I am starting to panic,did I just kill my PDA?
Please help guys,any advice is greatly appreciated!
Clewer
I tried a method with MTTY,but I ran into problems again.
MTTY 1.42 doesn't show USB port,but I don't know why.I even uninstalled activesync,and the PDA is connected to the computer.I hope it isn't a brick yet!
Success!Now trying to install a WM 6.1 ROM,40%.I hope it works!
I can't believe it!IT WOOORKS!THANKS TO EVERYONE ON THIS SITE WHO PROVIDED INFORMATION ABOUT MTTY!!
Nice thread!
This is a nice thread.
Started,contributed(except me)and almost closed by the same guy.
Mods please close it.
Orb seems busy.
No hard feelings,I almost did the same but I read wiki more.
Related
Hello All!
I just got an XDA that has the oldest version of all three components. I was browsing the rom cooker last night and also found a RSU for 4.21 that i thought i could install (activesync install exe)... Oh boy what a mistake!
So now, after the "programme B" update that was in dutch was completed, i got a continuous pop-up in dutch that came up and stayed on every boot. I managed to remove the items from startup and i dont have that problem any more, but my radio does not work at all, and i cannot connect to active-sync to go back or try another RSU!!! It just seems that the usb on the device is messed up, as the PC tries to connect when i cradle it.
I believe my problem is that i did not use programme A first? i only discovered that program after screwing up the wallaby...
I am on my way to buy an SD card now to aid in the disaster recovery. In the meantime, if anyone would be so kind as to reply with a suggestion for fixing it, and how to properly update the components, i would Greatly appreciate it!
Thanks in advance, and i love the forum! Look foward to spending lots of time here
OK, so i found the GSM error thread and followed the instructions, but when trying to upgrade the RSU, i get the error: "Upgrade Failed! hit ok to reset device"
Any suggestions?
All Fixed! From zero to hero in a day!
gazorp said:
All Fixed! From zero to hero in a day!
Click to expand...
Click to collapse
How have you fixed it?
Maybe we can update the instructions....
Stefan
I followed the instructions here: http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
The only difference is that i did not copy to the startup folder and ran the update manually from the windows directory. Allowing the upgrade to run on startup always caused a problem like you described
Was trying to upgrade to the most recent T-mobile ROM, but it all seems to have gine horribly wrong!!!
Bought SPB backup earlier. Was feeling brave, so was gonna upgade rom and try and cook my own external ROM........... but now.....
Will not boot at all now, and a hard reset gives you the option to resttore factory settings, but then reverts to "loader" screen.........
Any help would REALLy be appreciated
I had exactly the same problem earlier today.
Unfortunately I can't remember the thread title for the solution but you will need to do a search for MDA and bootloader - then look for a thread that lets you download mtty and gives instructions involving typing set 14 0 in mtty - it should recover it fine.
SORTED!
Thanks for your help numanoids - greatly appreciated! 8)
Let the cooking commence!
I think I may be completely screwed but hopefully someone here can help me.
I tried running the shelltool program to flash to faria's wm6 rom and now my phone is completley bricked. It is stuck on the first screen when you power the device on, the screen that says T-Mobile and tells you what rom and radio version are installed on the phone.
I have tried running the RUU provided by T-Mobile and that didnt work and I have also tried re-flashing the rom using the shelltool program using the original rom. Nothing is working and I am desperate for help.
If anyone has any ideas, please help me as this is my only cell phone and I do not have the money to replace it.
Please, please help if you can.
reflash with the "wizard love rom" and its done you will recover your g4
Where do I find this rom and how should I flash it?
Read the wiki. You are not bricked. You need to get into bootloader mode.
People don't willingly help you if your not willing to help yourself, especially if you didn't read before flashing in the first place.
Hi guys,
I'm a newbie to the forum and for starters I want to apologise if I'm in the wrong section!
My question:- I want to upgrade WM6 to WM6.1 with the cube effect, what I want to know is where to find the right ROM? My ROM version is 3.4.
If I'm missing anything, can someone please let me know so I can update you guys!
Thanks in advance!
hello,
i've tested a few of the new roms thats floating around on this forum and so far for me the best has been the Ooops Black rom,,
http://forum.xda-developers.com/showthread.php?t=401062
i had to unlock my CID first using the USPL program and once i'd done that i could flash the custom rom,.
http://forum.xda-developers.com/showthread.php?t=308242
there's loads of really good roms available so just test until you find the one thats good for you.
Good Luck
i've unlocked the CID and downloaded the new ROM, but when i run the exe file that us ARTEMIS CUSTOMRUU error comes "the application failed to initialize properly (0x0000135)" now what to do?? how to run the exe file???
Are you using windowsXP??
i couldn't flash it with vista but when i used my laptop that had windows XP on and ran active sync to sync the device it worked no problem..
you have to have it sync'd with active sync.
hope this helps!
sometimes i find that if i put the device in to boot loader it works
so try update, it fails, stick device in to bootloader mode an try again.
thanks you very much
the error came on my pc becuse it did'nt had .Net framework installed..
after installin it everything went smoothly...
I have flashed my orbit with Oops Black ROM, although its very fast,but it has several bugs!! are there any better ROM's floating in this forum?? and if i want to restore my original Orbit WM6.0 OS what shud i do???
what type of bugs have you noticed?
mines running perfect!
yeah there's loads of roms available in the Windows Mobile 6 section of the Artemis forum.
you should have no problem upgrading to any rom available now.
@KevandLynds
Here are some bugs which i found
-> When using mouse mode, the pointer gets disappeared after sometime.
-> When Sliding your finger upwards (like when u wanna start that touchflo3D cube) an error comes and you have to restart the phone
-> Unable to view videos in Picture and Video tool.. although u can view pictures.
-> Cannot add menu items.
some of those are touch flo problems, 6.1 by its self it very good in my opinion, dont have any issues except that if i do a soft rest whilst plugged in to and synced with a PC it wont sync afterwards, need to rest unplugged, bizzar but doesnt happen to often
Guys I'm geting a 270 error.
I've hard reset the artemis and tried it, still doesn't make a difference!
Any ideas?
Thanks in advance guys
KevandLynds said:
hello,
i've tested a few of the new roms thats floating around on this forum and so far for me the best has been the Ooops Black rom,,
http://forum.xda-developers.com/showthread.php?t=401062
i had to unlock my CID first using the USPL program and once i'd done that i could flash the custom rom,.
http://forum.xda-developers.com/showthread.php?t=308242
there's loads of really good roms available so just test until you find the one thats good for you.
Good Luck
Click to expand...
Click to collapse
must be the biggest piece of crap sofware yet stops your phone working and cant put any programs on phone avoid this one
Hi all,
I'm a newbie here so sorry of this type of problem has previously been solved in a later thread. If so I couldnt find it.
Several months ago I returned from China to Germany with my Dopod C858 with stock windows in English, I found a link on how to upgrade the PDA to a cooked rom ( I cant quite remember which one but I worked fine and looked quite smart compared to the standard windows layout) nedless to say several days later I was not quick enough with the charger and let it run flat. After charging nothing worked anymore!! I can get boot loader (ISPL 1.09.0001 SPL 1.09.0001) and thats it. I have tried every possible way appart from gold card to reinstall a rom but always have either error 240,264,300 take your pick its different every time. I am running vista 32 (Prophet tools vista driver ). Please help with some suggestions or guidance how I can restore it..
Ps Active sync or even widows mobile device centre doesnt recognise it though if I go into Properties/Device Manager it comes up as a HTC Mobile device
Many thanks
You need to flash your original carrier ROM. Go into bootloader, hook up your phone via USB and flash it. Then you should have an updated IPL/SPL of 4.xx.xxxx, after which you can then apply HardSPL and flash another custom ROM if you like.
1. This is NOT a ROM Development thread. I moved it. Please post in the correct sectio next time.
2. It has been covered many times.
3. You flashed using USPL or HardSPL but your SPL is below 4.0 They're both incompatible with your SPL.
4. Your only fix will be a gold card. Search for it and you will find detailed instructions on how to fix it.
Moved?
Where did you move my thread to please?
It was moved here.
ivanmmj said:
It was moved here.
Click to expand...
Click to collapse
LOL, wow.