Related
Hi,
I bought an herald not blocked to any operator, i tried to upgrade it
to WM6 but it crash during te update (don't know why).
I tried to re-flashed it with RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship.exe
but i got an invalid vendor id something like message.
I try to find a no vendor id with no success.
Please Help!!
Regards
Herc.
There are VERY much posts of people who are havig the same prob's. And yes there is a good possibility that your device is bricked. BUT wich ROM was installed on yur device? you could try these two ROM's first before messing around!
-http://superiorgadgets.com/software/RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship.exe
-http://superiorgadgets.com/software/RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe
first to to is putting your device in bootloader mode: HOLD Camera and then press soft reset once. then connect to pc via USB, then run the RUU and follow the steps. good luck
Hi,
I already tried both of these roms and even more, even roms from other
models but always with the same error: INVALID VENDER ID
I think the solutions will be:
-Right or NoVendorId Rom. (Like for the prophet)
-Mtty trick but with right Commands and values
-SD Boot trick via HERAIMG.nbh well signed.
Please someone to help us
Bye
Herc.
News here??
bayxsonic said:
News here??
Click to expand...
Click to collapse
You could flash back no problem by flashing back to original shipped ROM......problem is though you need to find out which ROM came with your phone, then you need to get your hands on it.
Hi all
I have installed Dutty's ROM, and sometimes its unresponsive, when i click on the screen. So I wish to flash the ROM again and install the Windows Mobile 6.5. However, I cannot connect my device through USB, its not even detecting it.
What can I do to fix this problem?
Thanks a lot for your help and advice
jmonfu said:
Hi all
I have installed Dutty's ROM, and sometimes its unresponsive, when i click on the screen. So I wish to flash the ROM again and install the Windows Mobile 6.5. However, I cannot connect my device through USB, its not even detecting it.
What can I do to fix this problem?
Thanks a lot for your help and advice
Click to expand...
Click to collapse
What have you tried? Have you pulled your USB out of Phone and PC?
Have you soft reset your phone?
Put a bit more detail and we can help
ok so first i used the Unsigned_HardSPL_for_Blackstone_OliNex with ActiveSync and that worked fine. Then I moved the BLACIMG.nbh into the BlackstoneRUUWrapper to install the new ROM, and that worked fine too, 100%. Then I removed the USB cable and restarted the device. Now I am noticing that the device is working properly for maybe 10 secs, but then it freezez, and I have to resett it
jmonfu said:
ok so first i used the Unsigned_HardSPL_for_Blackstone_OliNex with ActiveSync and that worked fine. Then I moved the BLACIMG.nbh into the BlackstoneRUUWrapper to install the new ROM, and that worked fine too, 100%. Then I removed the USB cable and restarted the device. Now I am noticing that the device is working properly for maybe 10 secs, but then it freezez, and I have to resett it
Click to expand...
Click to collapse
Usually after a flash its recommended to Hard reset atleast 2 times did you do that?
Did you follow crackwhores instructions completely?
When I have flashed I wait till the finish screen on pc shows the phone should shut down and restart itself thats when i disconnect USB
when phone shows welcome screen i pull battery out and hard reset
oh so when everything is finished, and there is the FINISH screen on the PC, you should take the battery out and hard reset! Did not do this. New to all this. Managed to connect my device again by USB, and putting Miri's WM 6.5. Will hard reset after that
jmonfu said:
oh so when everything is finished, and there is the FINISH screen on the PC, you should take the battery out and hard reset! Did not do this. New to all this. Managed to connect my device again by USB, and putting Miri's WM 6.5. Will hard reset after that
Click to expand...
Click to collapse
Cool
have a reread of crackwhore thread its very helpful
thanks mate
jmonfu said:
thanks mate
Click to expand...
Click to collapse
No Problem
I have been help all through this site
its great bunch of people
Hi Ozmoran
I still have problems with my device, first it works for a number of minutes, then freezes, then after around 5 minutes comes back to normal. And secondly, cannot get my reception to work, ie cannot receive calls and messages at the moment. Its asking me, "Do you want to turn the phone on?" and when i click on yes, nothing happens.
This is the exact procedure I am following:-
1) Unsigned_HardSPL_for_Blackstone_OliNex. After 100%, I click on Finish on the PC, and remove USB cable. I remove the battery off and on again and I hard reset (from the small button on the back right?)
2) I do the same procedure for BLACIMG.nbh and that works fine too, 100% finished.
After this, first I notice that the colours are not vivid colours, but like an old PC colours, so i turn off and on the device (from the button at the top). Then after loading, its asking me to click on the "+" to align the screen, which I do, follow the next screen, and the ROM is working.
However as I said, sometimes its unresponsive, and cannot get reception from my mobile provider.
What am I doing wrong?
Thanks a lot for your help, I am a complete newbie
ok found this thread
http://forum.xda-developers.com/showthread.php?t=505377
will follow it this eve and see what happens
Reason you are experiencing this discolourization and not reception/signal is due to you most likely not following flashing procedure properly and possibly using wrong HSPL before flashing rom.
You need to use HSPL 1.56 to flash a 1.56+ based rom. Any previous version you need to use 1.14 HSPL.
I notice you have already found cRaCKwHoRe's guide. If you follow it, you will be fine. If you get stuck, just post a query inhis thread and someone will help you!!
great
i downloaded everything from that post and will do it this evening since the phone is at home.
Hopefully I can use my phone again very soon
If you also read this section in the wiki, it refers to your greenish discolourization as well and offers assistance. Though if you follow cRaCKwHoRe's guide you'll be fine
thanks guys
any preference on any particular ROMS that are popular?
I was going to try Miri's WM6.5
jmonfu said:
thanks guys
any preference on any particular ROMS that are popular?
I was going to try Miri's WM6.5
Click to expand...
Click to collapse
Good rom to start with if you want wm6.5, would also try EnergyROM HD by NRGZ28. Both excellent roms. As for wm6.1, IMHO Duttys is the best.
For you, I would try each and make your own opinion
Thanks
Will try Miri than and see how it goes
Last question (hopefully), once I will install the Hard SPL, there is no need to install it again if I want to flash the ROM again right? Just install the ROM i want
Thanks a lot for all your help!
jmonfu said:
Thanks
Will try Miri than and see how it goes
Last question (hopefully), once I will install the Hard SPL, there is no need to install it again if I want to flash the ROM again right? Just install the ROM i want
Thanks a lot for all your help!
Click to expand...
Click to collapse
Yes, once you install HSPL its permanent and you have no need to re-install it. You can restore default SPL at a later stage if you want.
USPL is temporary and needs to be re-used before every flash to new radio or rom
If I were you, I'd read up on both USPL & HSPL in the wiki for a better understanding before you jump in head first!!
yeah i will read more about it, just wanted to experiment.
Thanks for all your help!
Hey guys
managed to do it! Flashed the ROM and working perfectly now!
Thanks a lot for your help and time
Hi guys, I have a trinity for a few years and never had a problem whit the rom update process. Now I want to restore to a Rom that already was installed on my device and never had any problem, but when I try to start the update process it goes until 1% and a message appear on the update utility "the image file is corrupted. Please check your Update Utility". I don't know what to do anymore. This rom was used before and it's in perfect conditions. Now I tryed with another rom's but I have the same problem. Can someone help me on this?? Thanks in advance.
toxicrainpx said:
Hi guys, I have a trinity for a few years and never had a problem whit the rom update process. Now I want to restore to a Rom that already was installed on my device and never had any problem, but when I try to start the update process it goes until 1% and a message appear on the update utility "the image file is corrupted. Please check your Update Utility". I don't know what to do anymore. This rom was used before and it's in perfect conditions. Now I tryed with another rom's but I have the same problem. Can someone help me on this?? Thanks in advance.
Click to expand...
Click to collapse
hi, try to flash an original shipped rom and then any rom you like, or try to flash via sd
bye
You've bricked it
You'll need to use the SPL exploit to reset it so you can reapply a ROM
http://forum.xda-developers.com/showthread.php?t=308691
lotuschap said:
You'll need to use the SPL exploit to reset it so you can reapply a ROM
http://forum.xda-developers.com/showthread.php?t=308691
Click to expand...
Click to collapse
HI
I have no problem to update my p3600 until 2 days ago.
My mobile suddenly stopped working and when I tried to reboot it, it showed me the screen where I have to tap to set the screen....but it didn't work.
I made an hard reset and now my mobile is working, but if try to connect to pc to start an update ROM it stays always on Serial.
The usb port is working (if I connect the mobile windows recognized it and I can surf in it).
Do you think I need to do the exploit too?
Thanks in advance.
Best regards
hi guys,
im attempting to update my hd2 but cannont. i sync it with active sync, start the update and it changes the phone to the tri color screen, but immediately disconnects on the computer, and a 1 minute later i get the error [260] connection screen.
can anyone assist me with updating? i also heard there is a way to update from the memory card...that might be the best way for me if someone can help me with that. THANKS
trexxcrap2 said:
hi guys,
im attempting to update my hd2 but cannont. i sync it with active sync, start the update and it changes the phone to the tri color screen, but immediately disconnects on the computer, and a 1 minute later i get the error [260] connection screen.
can anyone assist me with updating? i also heard there is a way to update from the memory card...that might be the best way for me if someone can help me with that. THANKS
Click to expand...
Click to collapse
What are you trying to update it to?
secano said:
What are you trying to update it to?
Click to expand...
Click to collapse
the new update that came out a few days ago....
trexxcrap2 said:
im attempting to update my hd2 but cannont. i sync it with active sync, start the update and it changes the phone to the tri color screen, but immediately disconnects on the computer, and a 1 minute later i get the error [260] connection screen.
Click to expand...
Click to collapse
Here is a link to the error codes. Your error means you need to go back to SSPL before you can flash that ROM.
trexxcrap2 said:
i also heard there is a way to update from the memory card...that might be the best way for me if someone can help me with that. THANKS
Click to expand...
Click to collapse
Here is a link to my tutorial on how to flash via SD card.
i am having the same issue each time i attempt to update my rom. error 260.
jenelson said:
i am having the same issue each time i attempt to update my rom. error 260.
Click to expand...
Click to collapse
You are still using the original SSPL (Soft Second Program Loader) which will only accept official update ROMs.
In order to flash the custom ROMs available here, you will need to flash in a HSPL (Hard Second Program Loader).
I don't know if you are totally new to flashing ROMs or not, since you didn't say and your post indicator said that was your first post here, but I would advise you to be very, very careful. In the early days (last month, actually) a TON of people were bricking their phones because they accidentally downloaded the European ROMs for the 512Leo. Ours is the 1024Leo and only ROMs designed for our phones will work.
The phone I am using is actually a replacement from TMO. I was having issues with the original device I purchased.
How do I use a HSPL or whatever... I am slightly confused but I can catch up quickly...
Thanks.
same thing happened to me, what i did was i restarted the update without disconnecting the phone from the computer, and it worked.
nyaznteen said:
same thing happened to me, what i did was i restarted the update without disconnecting the phone from the computer, and it worked.
Click to expand...
Click to collapse
I encountered the same problem and it appeared that my computer was slow in "re-recognizing" the phone. For some reason, it had to reinstall drivers before continuing with the update. After the device was again recognized, I restartde the update (without disconnecting the phone) and it continued without issue.
I had been worried that the phone had become a paperweight when I saw the tricolor screen, but everything has been fine and the upgrade appears to have worked correctly.
jenelson said:
The phone I am using is actually a replacement from TMO. I was having issues with the original device I purchased.
How do I use a HSPL or whatever... I am slightly confused but I can catch up quickly...
Thanks.
Click to expand...
Click to collapse
Think of HSPL as your BIOS (it isn't, but it may help you to think of it as such). You don't have any control over the options, but you need it to load or install your OS. Installing HSPL is simply a matter of following the directions in the link that I posted last time: http://forum.xda-developers.com/showthread.php?t=653614
Once you have HSPL installed, you should be able to "flash" any ROM. Of course, this also allows you to flash ROMs that are not meant for your phone, so that's the danger behind it.
When you visit a thread that offers a ROM, it should either have instructions or a link to instructions on how to install. If it does not, a google search for "xda how to install a custom rom" should give you a million helpful links. (This is actually beyond the scope of this post so I won't go into details)
Hope this helped some...
Same problem but i have hspl?
not sure what im doing wrong here I've installed hspl 1.42 which was enough trouble for what seemed like a pretty straight forward job. now whatever i try to install all i get is error 260? on top of this i don't seem to be able to send message tho i can receive and the camera on my phone no longer seems to work?
i am a newbie but Ive been reading and clicking and trying to install stuff for hours and hours and so far all Ive managed to do is install hspl and reduce my phones usability.
i got windows mobile device center 6.1 tried it with and without allow usb connections.
my antivirus and firewall is off.
.net framework 4 installed.
tried different usb ports
ive tried installing Duttys_Leo_Sense_2.5_5.23569.5.5.0_2.14_Holy_Grail_576MB_V4.3_WWE and a stock rom
my computer has vista 64 on it.
im hoping im just being a bit dense here please help me i just wanna join in on all this flashing fun!!
mumbles85 said:
not sure what im doing wrong here I've installed hspl 1.42 which was enough trouble for what seemed like a pretty straight forward job. now whatever i try to install all i get is error 260? on top of this i don't seem to be able to send message tho i can receive and the camera on my phone no longer seems to work?
i am a newbie but Ive been reading and clicking and trying to install stuff for hours and hours and so far all Ive managed to do is install hspl and reduce my phones usability.
i got windows mobile device center 6.1 tried it with and without allow usb connections.
my antivirus and firewall is off.
.net framework 4 installed.
tried different usb ports
ive tried installing Duttys_Leo_Sense_2.5_5.23569.5.5.0_2.14_Holy_Grail_576MB_V4.3_WWE and a stock rom
my computer has vista 64 on it.
im hoping im just being a bit dense here please help me i just wanna join in on all this flashing fun!!
Click to expand...
Click to collapse
just for kicks did you try a different ROM, find another ROM that is Compatible and try it, not saying there is anything wrong with Dutty's , but could just be the download , but not sure since you tried stock too ...
You may need to reinstall HSPL3, if you tried to flash a stock rom, and even if it failed it could have removed HSPL ...
Also try plugging the USB cable into the back of the machine
error 260 1024hd2
Hey guys,
I am having the same issue although I may know the answer but not sure how to fix it. Prior to flashing chuckyRom, I installed HSPL but I don't think I installed the correct version (still worked). So does anyone think this entire problem is attributed to initially installing the wrong hard SPL. If so, how can this be fixed? android is running great on chuckyRom but it would be nice to use a rom that is used for more than running android.
Please help, I have been in misery trying to solve this for over two weeks now.
Error 260, T-mobile HD2
Error 260 during ROM update
I had the same problem and tried everything (?)
Finally I got it work.
After I started the update the first time, I got the message, driver was not installed successfuly ...blabla
I ignored the message, tried and the connection disconnected every time again.
At the end I used another usb port and it asked me to download the CDMA driver. After download and installation, the update was in 5 min. done
Snarksneeze said:
You are still using the original SSPL (Soft Second Program Loader) which will only accept official update ROMs.
In order to flash the custom ROMs available here, you will need to flash in a HSPL (Hard Second Program Loader).
Click to expand...
Click to collapse
He was trying to install the OEM rom. I'm doing the same and have the same issues.
Error 260 on Htc Hd2 running windows mobile 7
I cannot get data on my hd2 when I installed win7 so I wanted to downgrade the os back to 6.5 but I get Error 260 when I connect to my phone to my cpu via usb. Is there a work around?
Dizzle88 said:
I cannot get data on my hd2 when I installed win7 so I wanted to downgrade the os back to 6.5 but I get Error 260 when I connect to my phone to my cpu via usb. Is there a work around?
Click to expand...
Click to collapse
Put the phone into BootLoader Mode then connect to the PC. Run the ROM.
Error 260 connection in HTC HD2
Dear all;
i have this problem in windows 7 each time i connect my phone with pc it gave me error 260 , so when i connect the usb cable i choose the first choice sync not the default one storage and it worked for me .
Ahmed Hosni
thanks for the note
fred_up said:
Put the phone into BootLoader Mode then connect to the PC. Run the ROM.
Click to expand...
Click to collapse
First time flashing the radio and kept getting error 260 from CustomRUU.
Read so many threads and all say sync the phone with your PC and run CustomRUU. Nobody said to run it under BootLoader Mode.
This simple note helped a lot for a newbie like me.... thanks
Error [260]
Hello
I want to try to update my HD2 from 2.2 to 2.3.x but I always geht thr Connection error.
I´ve flashed my HD2 from Windows Mobile 6 to Android.
I thank you for your help.
So earlier today i got my hands on a t mobile htc hd2 off a friend. So the phone has problems i guess, not sure what the problem is hoping maybe someone experienced enough here that could help me out with procedures on how to fix it. i've attached pictures of what it looks like when i turn my phone and try to boot from sd card.
i try to use this file to flash my phone. xxx.2shared.com/file/MAsa78Yo/leoimg.html
please any help is really appreciated.
anyone care to help? please
anl617 said:
So earlier today i got my hands on a t mobile htc hd2 off a friend. So the phone has problems i guess, not sure what the problem is hoping maybe someone experienced enough here that could help me out with procedures on how to fix it. i've attached pictures of what it looks like when i turn my phone and try to boot from sd card.
i try to use this file to flash my phone. xxx.2shared.com/file/MAsa78Yo/leoimg.html
please any help is really appreciated.
Click to expand...
Click to collapse
You need to read through this a few times and eventually Hard-SPL the device (allowing you to flash cooked/custom ROMs on the device).
You need to read through this a few times and eventually Hard-SPL the device (allowin
so install the hspl file on to my hd2 sucessfully. when i try to install the rom it would freeze up around 42 percent the first time i try to install. the second and few times after it went into recovery mode it didnt make it past 16%. can some one help me out ? i was trying to install the energy leo cookie rom for tmboile.
try flashing a cooked rom, in the hope that it doesnt try to flash the radio, since it looks like its the radio causing problems. (This isn't the only thread with the dreaded 'RSA Fail' next to teh radio.)