Database Users

o2 wizard doesn't connect to encrypted networks

my phone connects to any unencrypted open network from a router or my pc. but whenever I encrypt the network by wep and put a key on it. it fails to connect instead keeps showing the disappearing arrows that signify the phone is trying to connect how do I fix this?

turn off wpa security on your router or flash a rom which can handle it

Hey thanks for replying i have also tried t network it with my pc which does not have that security just the network key. Can you name a rom that can handle it? Even the original rom i had couldn handle it.

d3aded said:
Hey thanks for replying i have also tried t network it with my pc which does not have that security just the network key. Can you name a rom that can handle it? Even the original rom i had couldn handle it.
Click to expand...
Click to collapse
sorry, i don't understand very well what you just said. use your pc to adjust your router's security settings.
i don't know which - if any - roms can handle wpa security, but i spent months trying to work out the problem, then i turned wpa off and it now works. i have not bothered to turn it back on since, so i don't know if any roms work with it

Just don't use an auto-generated key but a WPA SHARED KEY (the option where you define your own wirless network password). Pay attention that you enter this password exactly as you did in the router! I tried plenty of ROMs before I was gone with a shipped version again and never had a problem with this settings! BTW: my router is a LINKSYS54GS.
Maybe it helps in future if people post their router model? At least we could locate which routers are the most common trouble makers for the WIZ ...

Junner2003 said:
Maybe it helps in future if people post their router model? At least we could locate which routers are the most common trouble makers for the WIZ ...
Click to expand...
Click to collapse
i read about belkins being a problem before i turned wpa off
mine is an inventel and came with the orange internet connection

hmmm the thing is i connect it with my pc since i dont have a wireless router, i dont use the infrastructure type of networking, i use the ad hoc type, but even when i took it to my friends place where he had a router and gave me the key it stil wouldnt work, and i dont want other people sneaking in on my internet, so theres no way to make a wep encrypted network work on the o2? and i put in my own key very carefully as a precaution
im surprised to find that other people have this problem as well

you'll have to read the networking forum in the general area. i read every threads first post until i found a couple which looked like they might help.

WiFi client detection software?

Hi, thanks in advance for help.
I have someone leeching off my Wifi net, who seems to be able to 'break-in' no matter how i secure the WiFi net.
Anyone know of any free Windows Mobile software that will show signal strength of Wifi CLIENTS nearby. Not Access Points, but CLIENTs.
I want to go find this guy.
thanks

Hi there!
If you got an "leecher" on your network I would recommend you to start your search on your router.
You didn't provide any specs, how did you find out that someone is on your network?
Next question, have you changed both, router pass and wlan key?
Are u using weak encryption (wep)?
Whats about your mac-filter?active?
I would guess you've got an dhcp server on your network/router... go there and check the dhcp releases. Any suspicious entrys? You should know all the devices listed there. If you have found a IP you don't know, ping it and check if its alive (those packages can be ignored by the host), try to access it via smb, you could also try a demo of languard and try to read out details like os, user, owner...
I'm almost shure you can't use your wm device to locate a client of a network, unless you can switch your wlancard to ap-mode and he connects to you ^^

Nope, need signal strenght reader if poss.
Thanks for the comment, but I'm pretty security savvy, and have done most of what you recommend.
I actually can't believe he's still getting in when I've locked down so tight.
Anyway, it's a CLIENT signal strengh program that I'm trying to find.

Rogue clients are malicious wireless client devices that either try to gain illegitimate access to your WLAN or try to disrupt normal wireless service by launching attacks. There are numerous ready-to-launch wireless attack tools freely available on the net. Many of them are open sourced and work pretty well with most Wireless client cards. This turns any curious mind to professional hacker in minutes. Many do it simply for the pleasure of being able to disturb someone remotely. All these developments force WLAN administrators to give a second look at any wireless client that is misbehaving.

What means most of that what i recommended?
Did you actually change the router password AND the wlan key?
Sorry, I don't think that you can trace him with your mobile. as long as hes not connected to your mobilephones wireless network (wich requires your mobile wlan device to switch to ap-mode).
Forget about that.
Please tell us, why do you think somebody is on your network, how did you find out... whats the "evidence" for you that there is somebody.
I'd like to help u, but i need some further details to lock him out.
I hope you know that its just a matter of minutes to break a wep key. GPUs are used to decode it, which is damn fast!
So please provide more specs about your network.
Greetings

1: Use WPA instead of WEP.
WEP is crackable in a matter of seconds.
2: Assign access control/MAC filtering
3: Use your network in ad-hoc mode
Well, WPA is crackable too.
The person in question might change his MAC to yours and create collisions anyways

Can you be sure that he has really associated with your router. I have noticed some client/router combinations "apparently" associate but all traffic is blocked because they did not provide the right key.
As others say - use WPA WPA2 and use a strong (non dictionary) passphrase
get a computer that can run airodump or something similar.
run airodump with it set to the channel of you router - not in hopping mode as you will miss lots of packets.
Airodump will tell you the strength of the signal from his computer so if you have this on a laptop you can move around and possibly can an idea roughly where he is

Thank you, i will try Airodump
Thanks in particular Scote.
I didn't list the router config simply becuase I am confident it's pretty secure:
Router is a new Belkin N1
- 63 random char password from grc.com/passwords
- SSID is "netgear" even though its a Belkin : intention to mislead for access URL.
- WPA2-PSK AES encryption
- SSID not broadcasting
I didn't bother with MAC filtering, as I understand a good 'hacker' can spoof it : If this guy can get through WPA2 I would say he can probably MAC spoof.
My 'evidence', is that up to 3 unkown computers turn up on the 'Clients List', around 4 hours after I change the SSID/password : Each time.
I have 2 laptops, so I will try Airodump or maybe Backtrack (suggested elswhere) on these as a 'direction finder' based on signal strength.
Hmmm...I did read somewhere you can set a Kaiser to be an access point...
Thanks all

Yes you can.
Someone found his stolen Wii/mobile phone (don't remember which one) that way.
There was even an article on the net.

[Q] WiFi Problems AFTER Internet Sharing

This is an embarrassing question for two reasons. First, I’m sure it’s a simple answer that is just getting past me. Second, every search string I try comes up with dozens of pages talking about setting up Internet Sharing, none that I could find addressing my problem. After reading through numerous pages and double checking the terrific collection of FAQs that mmalka put together for the Rhodium Energy ROM, I decided to ask here.
My problem is with connecting to the Internet through a WiFi connection on my TP2 AFTER having used the Internet Sharing app.
I use WiFi at home all the time and I never have any issues setting it up after flashing – this time was no exception. It’s been working flawlessly since flashing the ROM in my signature several days ago. But I needed independent Internet access at work yesterday to test out a VPN/remote desktop connection on a laptop and decided to try the Internet Sharing app on our phones. VERY impressive! A couple of quick buttons pushed and viola’! Worked like a champ!
However, back at home I had trouble getting my phone to connect to my home WiFi router again. I discovered that when I tried turning on the WiFi, it was looking to be used as an Internet Sharing point again. So I deleted that connection (“forgot” it) and it successfully connected to my home WiFi router. However, it will not actually go to the Internet – everything faults out with “Connection is currently unavailable”. Switching to the T-Mo 3G connection, everything works great.
Has anyone else had this issue? Any suggestions short of a hard-reset?
Many thanks in advance.

Solved!
Well, judging by the number of looks with no reply, either this was a simple solution that I should have been able to easily figure out or no one else is having the issue to know what to do. But I finally figured it out and just in case anyone else eventually comes across the same issue, I thought I tell you what I found.
After digging around, I found that the Internet Sharing application changes the Broadcom 802.11 DHD Network Adapter to a local IP address. So all I had to do was change it to “Use server-assigned IP address” and everything worked. (Settings tab, Wireless Controls, WiFi - Connect to WiFi Network, Advanced, Adapters and Networks, Network Adapters, edit Broadcom 802.11 DHD Network Adapter, Use server-assigned IP address.)
I have no idea whether going back to a standard wireless connection should automatically switch it back, but it doesn’t in my case. If anyone has a simpler way of address this, I’d love to hear about it.
Regardless, I hope this help someone.
Thanks

gregb882 said:
I have no idea whether going back to a standard wireless connection should automatically switch it back, but it doesn’t in my case.
Click to expand...
Click to collapse
OK, so I stumbled into another revelation. It seems that if you remain in the WiFi Router application (or simply go back to it) and use the "Stop" command to discontinue the service, the Broadcomm Network Adapter does get reset to "Use server assigned IP address". The few times I used Internet Sharing, I was in other apps when I finished and simply turned off WiFi.
Oh well, live and learn.

I had a similar issue recently.
my new router was connecting fine to another mobile, but not my EnergyRom mobile.Thought it was my new routers band G/N compatibilty issue. however your post help remind me that i had used internet sharing on my HD2 for my laptop a few days earlier..Checked out my settings and well broadcom adapter was set to static at 192.168.1.1...switched it back to server assigned Ip and voila wireless is connected now
Really appreciate your post..Thanks so much for posting the solution, Gregb882

Wi-Fi issues out of the box

My Tab is brand new from Staples bought yesterday. After unpacking and charging,
wi-fi won't connect to my Verizon DSL wireless router. The Tab has v3.0.1 software.
I've read about plenty of wi-fi issues with the 3.1 upgrade, but, are there know issues with v 3.0.1 software.
I am looking for suggestions and help. Thanks

jostarr said:
My Tab is brand new from Staples bought yesterday. After unpacking and charging,
wi-fi won't connect to my Verizon DSL wireless router. The Tab has v3.0.1 software.
I've read about plenty of wi-fi issues with the 3.1 upgrade, but, are there know issues with v 3.0.1 software.
I am looking for suggestions and help. Thanks
Click to expand...
Click to collapse
a little more info might help, like what the wifi does, does it just join, but just says remember, or does it not find at all, or does wifi say error completely??

jakomo73 said:
a little more info might help, like what the wifi does, does it just join, but just says remember, or does it not find at all, or does wifi say error completely??
Click to expand...
Click to collapse
Thanks for your reply.
I never got connected. It says trying to obtain an IP address, or something like that. I also tried several resets using the paper clip procedure to no avail.

And is your router secured with a key? If so, were you prompted to add it before trying to connect? Did you add it correctly?

gammaRascal said:
And is your router secured with a key? If so, were you prompted to add it before trying to connect? Did you add it correctly?
Click to expand...
Click to collapse
It never asked for the password because it never got an IP address assigned to it.

jostarr said:
It never asked for the password because it never got an IP address assigned to it.
Click to expand...
Click to collapse
It can't get an IP address unless it has the WEP key to connect to it.
I take it your router isn't secured then.
Or maybe it's different for DSL *shrug* I don't know.

gammaRascal said:
It can't get an IP address unless it has the WEP key to connect to it.
I take it your router isn't secured then.
Or maybe it's different for DSL *shrug* I don't know.
Click to expand...
Click to collapse
I may be wrong, but I think it must first have an IP address assigned to it by the router. Then, you must give the password to get connected.
That's how it works for my laptops and iPod Touches.

jostarr said:
I may be wrong, but I think it must first have an IP address assigned to it by the router. Then, you must give the password to get connected.
That's how it works for my laptops and iPod Touches.
Click to expand...
Click to collapse
Take it back and exchange it.....
my first one had wifi issues as well... hardware issue.

jostarr said:
I may be wrong, but I think it must first have an IP address assigned to it by the router. Then, you must give the password to get connected.
That's how it works for my laptops and iPod Touches.
Click to expand...
Click to collapse
I don't know. That might very well be a "DSL" thing. But in order to connect to a wireless router (which has been secured with a WEP key) one must first add the WEP key to the device then, and only then, will the device be able to connect - not the other way around.
Don't confuse 'password' with 'WEP key'. While their job is similar (preventing unauthorized users from connecting) the lack of a WEP key prevents connection, period, while a password requires a connection first.
But like I said, for DSL routers, maybe it's different - the only thing I can think of would be for you to log into your router from your laptop/desktop and check the wireless settings to see if it is indeed secured with a key - if so, write it down and try again from the tab, making sure that you input the key before it tries to connect.
Of course it *could* be a hardware issue. but it sounds to me like you're missing something.

gammaRascal said:
I don't know. That might very well be a "DSL" thing. But in order to connect to a wireless router (which has been secured with a WEP key) one must first add the WEP key to the device then, and only then, will the device be able to connect - not the other way around.
Don't confuse 'password' with 'WEP key'. While their job is similar (preventing unauthorized users from connecting) the lack of a WEP key prevents connection, period, while a password requires a connection first.
But like I said, for DSL routers, maybe it's different - the only thing I can think of would be for you to log into your router from your laptop/desktop and check the wireless settings to see if it is indeed secured with a key - if so, write it down and try again from the tab, making sure that you input the key before it tries to connect.
Of course it *could* be a hardware issue. but it sounds to me like you're missing something.
Click to expand...
Click to collapse
If it says it is still waiting for an IP address, I can't type anything in....WEP key or password. I may have not been clear with the problem. It "sees" my router, but is constantly trying to obtain an IP address. Sorry for the confusion.

There's no confusion. Of course it will see your router if the router is broadcasting its SSID. That still doesn't mean you *can* connect to it.
Log into your router and check if your wireless is secured with a key. If it is, then you need to add it to your tab *before* it can get an IP address. I can't be any clearer about that.

gammaRascal said:
There's no confusion. Of course it will see your router if the router is broadcasting its SSID. That still doesn't mean you *can* connect to it.
Log into your router and check if your wireless is secured with a key. If it is, then you need to add it to your tab *before* it can get an IP address. I can't be any clearer about that.
Click to expand...
Click to collapse
Ok, thanks. I know the WEP key. But I don't low how\where to enter it into the Tab. I would appreciate it if you could post step by step instructions. Up till now, I have been trying to follow what the Acer manual pdf says:
"If you did not connect to a Wi-Fi network when you first started your tablet, or want to connect to a new network, tap Apps > Settings > Wireless & networks to manage your connection settings. Alternatively, tap the Wi-Fi status icon in the bottom-right corner of the screen.
If Wi-Fi is not on, tap Turn on Wi-Fi, and wait for your tablet to detect nearby networks. Tap the name of your network and enter a security password, if needed."

Right. Click on the network, add the WEP key where it says 'password'.

I'll try it later when I get home from work and will post my results. Thanks for you help.

What you're doing sounds strange. I too have a DSL router, but it works no different than any other router I've ever had. I've had several Android devices including tablets, and they all work the same. When you try to connect to a protected network, it will prompt you for a password. It cannot obtain an IP without the password, this step occurs after the password verification.
I have had issues where my remembered networks just sometimes sit at "Obtaining an IP address...", and never connect. Usually a reboot solves this problem. I tend to have more issues with WPA networks than WEP, but almost nobody uses WEP anymore.
But, there really shouldn't be a trick to it. Click on the network and it will prompt you for a password (WEP or WPA, works the same). If you've already done this, try rebooting.
I've never had the experience that jostarr has, where I needed to enter a key before a password.
Otherwise, like one of the other posters stated, it could be a hardware issue.

Problem solved.
I tried the Factory Reset from the settings menu. It took a few minutes to reset and reboot. A s soon as I went to the Wi-Fi settings, it found my router, got great signal strength, and was asked for my password. It then connected immediately.
I then went to settings, and looked for any updates. It found the latest update, so I downloaded and installed OS v3.1. It took about 1 hour to complete the download and installation. My tab works great now. I could not be more pleased with it.
Many thanks to all on this forum and elsewhere who contributed their suggestions and advice.

congrats on solving your issue Jostarr. I'm happy you got it worked out.

Cannot connect to WEP secured network

I have done about everything. I can connect to my Android phone (using tether), my house, other open networks PERFECTLY, but unfortunately my gym uses a WEP network and I cannot get my tablet to connect to their network.
I have rebooted, forgot the network and set it up again (a million times) I have done EVERYTHING. My Android phone can connect to the gym network perfectly. Any suggestions?

Anyone have any suggestions? Does anyone connect to a WEP secured network and know that this works?

I had the same problem and found out the solution changing some values in the set up router.
Sent from my X10i using XDA App

I'm connected to our home browser which uses WEP. I think it's a matter of settings/wireless and networks/Wi-Fi settings/add wi-fi network. Once you are in the 'add' page, it asks about security, you should be able to input the data.
Jim

I have had same problems, honeycomb handles WPA and WPA2 enterprise networks weird compared to gingerbread. I have had problems with connections too. Try to use the "wifi advanced config editor" and make sure settings are correct for that network (after you attempt to connect to it in settings app). I hope google fixed this problem in ICS or i will be furious. Most of these kind of bugs are laziness on coders or just people who missed lines of code and then don't want to release an update (or wait till next update release rather than a hotfix).

1337GameDev said:
I have had same problems, honeycomb handles WPA and WPA2 enterprise networks weird compared to gingerbread. I have had problems with connections too. Try to use the "wifi advanced config editor" and make sure settings are correct for that network (after you attempt to connect to it in settings app). I hope google fixed this problem in ICS or i will be furious. Most of these kind of bugs are laziness on coders or just people who missed lines of code and then don't want to release an update (or wait till next update release rather than a hotfix).
Click to expand...
Click to collapse
So just to make sure I understand...
Basically the way I originally connected was that I let the tablet scan for networks, and it found the gym network. Once it found the gym network, I selected it and entered the password. I left the proxy and DHCP settings alone and pressed connect, and cannot get it to connect.
What you are suggesting that I do is delete the network, and add the network MANUALLY (where I input securtiy, SSID, passcode, etc.).. Is that right?

So I installed the Advanced Wifi tool, to no avail.
Here is the funny thing. I have a Samsung Epic 4G phone which uses Gingerbread, and it connects to the WEP just fine. I installed the Advanced Wifi on there as well, and went through the settings that were autoconfigured for the gym. Each setting matched my tablet perfectly, yet my tablet cannot pull an IP address, but my phone can.

I'm having the same issue. Thought it was the tab, just received replacement and still a No Go! Every other device in my house connects to this network. And the Gtab also connected perfectly until recently... no clue what to do now.