Related
I have a ZyXEL P-2602HW-D1A Wireless router. I have tried all combinations of security, even NO SECURITY WHATSOEVER, and still the device won't transfer data.
Not working;
Firmware: 1.5, Build: CR817
Wifi Router: ZyXEL P-2602HW-D1A
Security: Tried All; WPA2, WPA, WEP & None.
Problem: Connect under all conditions but no data is sent
Please help.
Have you tried another WiFi access point to check the devices WiFi module actually functions?
No, I haven't tried that yet, but don't really see the point... I've connected effortlessly to the same WiFi network with my HTC Touch Diamond.
jbelman said:
Have you tried another WiFi access point to check the devices WiFi module actually functions?
Click to expand...
Click to collapse
For some reason my N800 wouldn't connect to MY ZyXEL P-2602HW-D1A unless I set the device (N800) to disable any kind of wifi powersaving features it had.
On another note, how did you get your hands on the device so early? I'm guessing you are using a Cybercity internet connection? (I'm in copenhagen myself)
edit: I actually came to that solution when i noticed I could connect to OTHER accespoints, but not the Zyxel ones.
Same problem here in France with a Freebox as router
I've noticed under the router's WLAN client list that the device does not have a "Host Name". Would that present a problem?
It is assigned an IP address by the router without any problems, though.
Also the device seems to lose connection and reconnect constantly (every 5-10 seconds).
I done some digging around in the router settings and found an "AnyIP" feature. Would that possibly help?
There are a number of issues floating around. Support for WPA2 seems iffy and some people can just change to WPA or WEP and all work fine.
There are however a number of people (such as me) who can get a connection perfectly, it shows connection OK, they get an IP from the DHCP server etc, they can even browse a page for a few seconds... but after that no data is sent and everything times out. This is happening on any security from none through to WPA2.
I have seen no solution to this anywhere and believe me I have looked. Some people have given up and got a new router, but this is not a solution.
Can someone confirm that this has been recognised as a fault with the magic and is being investigated, rather then assuming it's a user or router error. There are far too many instances of this across many brands of router for it not to be an issue with the HTC Magic.
zyborg said:
No, I haven't tried that yet, but don't really see the point... I've connected effortlessly to the same WiFi network with my HTC Touch Diamond.
Click to expand...
Click to collapse
What I mean is have you tested the device on ANY other AP except the ZyXEL?
No, but since I'm by far the only one having this issue (try searching the web; see my last post), I didn't feel it was necessary. Just want some input from xda-dev that might solve the problem, if any.
jbelman said:
What I mean is have you tested the device on ANY other AP except the ZyXEL?
Click to expand...
Click to collapse
I've had exactly the same problem earlier with the N800 on the zyxel. Exactly how you describe it.
Did you find out if you could turn off any powersaving features on the HTC?
same problem here
in france with a freebox
I don't exaclty know what router is in the box
but I have excalty the same
I set on never the wifi sleep(powersaving) mode.
i found it in setting wifi menu button then advanced and "never"
but the problem is still here
zyborg said:
There are however a number of people (such as me) who can get a connection perfectly, it shows connection OK, they get an IP from the DHCP server etc, they can even browse a page for a few seconds... but after that no data is sent and everything times out. This is happening on any security from none through to WPA2.
Click to expand...
Click to collapse
I have the exact same problem on mine. I just hope it is not a hardware issue...
Could be DHCP lease time problem. Did anyone of you tried to set up Magic with Static IP?
Yes, I tried that also - didn't help one bit.
TheRookie said:
Could be DHCP lease time problem. Did anyone of you tried to set up Magic with Static IP?
Click to expand...
Click to collapse
I also have this problem. Im in Denmark with a Zyxel P660HW-p1.
Another user of Cybercity in Denmark with the same problem.
ZyXEL P-660HW-D1
The android is the only device that doesn't work. I have tried with Iphone and laptops.
I've tried to change the settings on the router to no avail.
Enable 802.11g+ mode [on/off]
RTS/CTS Threshold [2432/4096]
RTS/CTS Threshold [2432/4096]
Max. Frame Burst [600/1800]
The device shows up in the device list with no hostname, the HTC Magic gets the right ip address (using the program WhatIsMyIp to view it)
I had the same problem before, when I set my TP-LINK draft N router with WEP security my HD can see it, connect to it (but speed was slow tho), and my HTC Magic just keep saying its not in range. However, when I set it to open security it works, so I recognise its probably the security setting... so I changed that to WPA2 and then it works.
In my case, I see different device have different tolerance to some settings (in my case, draft N + WEP is OK with laptop, HTC HD, but not Magic), so its still worthwhile to try a few different settings, and try a public wireless access point also to double confirm?
Power save?
I have Zyxel (P-2602R-D1A) router.
I had exactly the same problem with my HTC Vox (winmo)... but that was solved by boosting the WiFi in the phone.
WiFi -> Best performance
So Im guessing magic is in some WiFi "power save" mode...
I dont know how this works, but I thought maybe you could change some WiFi settings behind the hood - that is if the hardware is capable of it.
Zyxel (P-2602R-D1A) router
I am having the same issue with this router as the other posters. The phone connects perfectly and reports an excellent signal, but barely sends or receives any data. I have used a terminal emulator to ping the router and it reports an 82% packet loss. This must be a big problem for many Danish users as it is the standard wifi router provided by two of the major ISP's.
same issue here with my vodafone uk magic.
wifi connects and i can browse for a few seconds then get a connection error and can't browse until i re-start wifi on the magic...
i've actually given up using wifi at home now due to this.
router is a talktalk supplied Huawei Echolife HG520b using 128 bit WEP
i can connect fine via wifi at the office so i don't think it's an issue with the handset, just with certain routers or router configs...
this issue has been reported on the vodafone uk forums but as yet no solution.
http://forum.vodafone.co.uk/index.php?showtopic=31937
Please help, ive had my hd2 for a few days now and have had nothing but problems, might just give it back!
It picks up my home router but simplify wont connect, it just displays a small rotating circle likes it working but nothings happening.
When i remove the settings and retype the key code it keeps saying incorrect code but it isnt,
Anyone any ideas, can i some how reset the wifi settings, its taken me a few days to customize the phone so i dont really want to do a hardwear reset. Ive already a software restset.
Bloody htc!
What protocal are you using on your router? WPA, WEP?
Oh if your using an older Belkin router, I know of about 3-4 models that used to have trouble with WinMo, an update Router flash fixes it though.
Give us some more info on your router etc and Im sure we can help though
Sure your using the right password/key? if it says its wrongs it is probably wrong lol. Maybe try changing it to a more basic password as a test? like "password" and see if it can get connect.
knightrider66 said:
Please help, ive had my hd2 for a few days now and have had nothing but problems, might just give it back!
It picks up my home router but simplify wont connect, it just displays a small rotating circle likes it working but nothings happening.
When i remove the settings and retype the key code it keeps saying incorrect code but it isnt,
Anyone any ideas, can i some how reset the wifi settings, its taken me a few days to customize the phone so i dont really want to do a hardwear reset. Ive already a software restset.
Bloody htc!
Click to expand...
Click to collapse
Hi
Calm down. Give some information about your router and the type of security You use.
try these
1. Reset the router once
2. If you use MAc access list on the router then add your device's MAC to the list.
3. If you use N router then in the settings untick N mode protection.
Give more details about the third party software on the hd2 using radios (eg: tomtom, igo,gpstuner like these)
Good luck
HI guys thanks for helping out.
Obvious first - yes the key code is correct i use it on my laptop and iphone.
security mode says WAP-PSK/WPA2-PSK. Its a siemens ive been on the ip server addres and cant see any issues, im on my laptop using the wifi now and its working perfet.
Ive tried everything, changing passwords, settings both on the router and on the phone.
The hd2 is full of really stupid bugs!
Try to hardreset the PPC.
If it won't work, try to update your ROM to the latest available.
If it doesn't want to work, then try to connect to another WiFi without password and see the connection is successful.
If it works with an unprotected WiFi, try to connect to a different router but with protected WiFi.
If it works, then there is a problem with your router and I suggest to update your router's firmware.
funny wifi
the problem wit my hd2 is most of the time it shows wifi connected but i cant surf the internet and sometimes out of the blues it connects to the internet,cant figure out wats happening....
HI kholk, thanks for the help, ill work my way through it and hopefully get it sorted!
knightrider66 said:
HI kholk, thanks for the help, ill work my way through it and hopefully get it sorted!
Click to expand...
Click to collapse
Have you found the solution? I can help you my friend i had the same situation
I tried to connect yesterday my hd2 with my router. First it wasnt working aswell. Then i set the next things. Channel 9 (was auto), Encryption AES (was tkip and AES). Network mode is Mixed. Further have you installed Mac Filter? I installed this also. So if i have a connection thats it. I must fill in my macadres from my phone for i get fully connected.
Hi guys thanks all for you help call HTC UK support and their amazing advice was to do a full hard reset!
I really am having a lot of problems with this phone and i cant understand why their have been so many issues?!
Hi guys,
I have the same problem- HD2 shows it is connected, but no access to Internet(other- laptop, SE990 phone is connected and working OK)
For not to write about all, now situation is:
1. On router wrt54g2 temporary disabled wireless security, only mac filtering is on(laptop mac, SE mac, HD2 mac is allowed), router firmware is up to date
2.HD2 is like new after hard reset, no settings is done for connection to home network. HD2 wifi is on, looking for access points and connecting to only one available open network in my area- to my home network and shows it is connected but no access to Internet.
3. In router I can see all connected clients by mac. All 3(lap, SE, HD2) are connected. I use Network Magic software too but it is showing only my laptop and desktop are connected. SE is not connected according NM, but it is working OK.
P.S.
Do not know what else can help you in my problem(maybe some other router setting, but as other devices are connected without problems so maybe it is not important for now)
So only my HD2 can not access WWW
Can You guys help somehow please
I've got a similar problem with an HD2 over here. Wifi does switch on, but it just won't connect to my router. The cirkel that is supposed to show when connecting to a network doesn't show either. I'm using WPA2-AES security, and yes, i did use the proper network key. I haven't tried connecting to other networks/using an alternative encryption method because a lot of other devices will then have to be reconfigured and it's not my own place. My Touch HD and 2 laptop connect to the network without any problems. The only solution I came across until now is doing a hard reset, which I would rather not do... I'm using a stock dutch rom (V1.43). Is it possible that upgrading to the newer 1.48 will solve this problem?
Have you tried removing the wireless security password and trying again? Test to see if maybe you are indeed typing in the password wrong.
Also check your exception list on your router, it might be blocking any other devices coming in.
I have the same problem.. Get the spinning loading circle and thats it.. But if i turn my belkin wires g router running wpa2 off then straight back on again the phone connects fine. But if i then leave my house or disconnect from the network then try and reconnect it wont and have to do the same process again. Luckily im also running a speedtouch 585 modem router which the phone connects fine to.
hey maybe it takes only a WEP key and not WPA as most people have. this is certainly the case as mentioned in the Wifi router article below -
http://www.mobilityminded.com/5438/wi-fi-router-on-htc-hd2-application-overview
Again me
It seems that it is problem with my router. HD2 was able to connect to open wireless a.p. in my town and all sow to my friends router which is using WPA security. So my linksys is not compatible, or i will try some other settings on it, but as other router clients have no problems, i am loosing my hope to have my HD2 connected at home unless i change router. But then another problem- which router will be compatible with all my devices in prise range of 100$
And replying to blackheart2925 my friend is using wpa not wep, i do not know other settings on his router but it is not security problem.
One thing is strange for my HD2 shows it is connected, router shows mac of HD2 among connected clients, but only HD2 do not have access to internet
allann said:
Again me
It seems that it is problem with my router. HD2 was able to connect to open wireless a.p. in my town and all sow to my friends router which is using WPA security. So my linksys is not compatible, or i will try some other settings on it, but as other router clients have no problems, i am loosing my hope to have my HD2 connected at home unless i change router. But then another problem- which router will be compatible with all my devices in prise range of 100$
And replying to blackheart2925 my friend is using wpa not wep, i do not know other settings on his router but it is not security problem.
One thing is strange for my HD2 shows it is connected, router shows mac of HD2 among connected clients, but only HD2 do not have access to internet
Click to expand...
Click to collapse
how are you connected to internet is it router which dials to isp or you have made a broadband dial up on your desk top ...
if you have dial up shortcut on desktop then you can not use internet via hd then change setting in router
better way is hard reset router and then reconnect hopefully it will solve your issue ..........
commando0 said:
how are you connected to internet is it router which dials to isp or you have made a broadband dial up on your desk top ...
if you have dial up shortcut on desktop then you can not use internet via hd then change setting in router
better way is hard reset router and then reconnect hopefully it will solve your issue ..........
Click to expand...
Click to collapse
Router "dials" to my isp and share internet for all connected devices...
Yes, i am going to hard resset my router, but have not much hope i sucsess
PROB:
If your HD2 connects to router but you cannot enter any web site, do this:
SOLUTION:
enter your www router settings - wireless - access control - MAC Address Filtering Table ->>>>> add your HD2 MAC adress
enter your www router settings - firewall - access control ->>>>> add your HD2 MAC adress
so, you have to add your MAC adress of HD2 into router TWO TIMES into TWO PLACES!
I had the same problem and..... solved
Hello all,
I love my X10, but the frustration with getting it to connect to my Netgear DG834 router was getting to me, so I dedicated an afternoon to working out a solution and I've found one that works for me, so I hope it'll work for you too.
Summary of problem
--------------------
The phone will connect to the Router once, and once only. Any attempt to re-connect to the wifi will result in the phone disconnecting, scanning again, then discinnecting until the user gives up. Nothing will cause the phone to reconnect (telling it to forget the connection for example). The only surefire way to reconnect is to reboot the router each time - not ideal.
Manually adding a Static IP also doesn't work - which is weird as that is how I've solved it, see below.
Scale of problem
----------------
The problem seems to be with the router and not necessarily the phone as it appears to be on a wide range of phones (Hero, Droid, Touch HD etc.). Seeing at the DG834 is the most popular router in the world, and Android is growing all the time, there are a large number of people affected.
However Iphone and Symbian phones appear to be unaffected.
Reason for the problem
-----------------------
Currently unknown, but appears to be something to do with the handshaking procedure when a device asks the router for an address (DHCP) - though as to what I don't know.
Solution
--------
1) Download an app called WiFiStatic from the App Market. WiFiStatic takes each DHCP assigned IP address and stores it in a small database to be re-applied whenever you are back in range of the same Router again. It is not an ideal solution as you may have to re-scan and re-assign if you visit a busy hotspot, but this is a two press function, so it's not that onerous.
2) Turn off your Router. Make sure the WiFi on your phone is off too.
3) With the router off, clear your Remembered WiFi connections (or at the very least the Netgear connection). Once that's done, turn the Router on again and wait until it is full back up again.
4) When the Router is fully operational again, turn on your wifi on the phone and let is scan for and connect to the Netgear Router. You may need to tell it to connect from the Wireless Settings menu on the phone.
5) The phone should now connect to the Router successfully. If it doesn't, repeat the above procedure.
6) With the phone connected to the router, fire up WiFiStatic. Check Auto Switch and Show Visual Prompt if they are not already selected, then Tap Add configuration at the bottom of the screen.
7) The IP address and other settings assigned by your router should be displayed at the top of the screen, at the bottom should be the name of your router and its MAC address. If not then tap Menu > Generate to populate the form.
8)Tap Menu > Done when everything is ok.
That's it. Now when you move into range of your Netgear, you should get connected, though it does take a bit longer than normal (the Router still wants to assign an address first before accepting the static IP). You can speed this up by changing the Device table on the router to always keep the Phone's static IP open.
This shouldn't work as all my other attempts with Static IP failed, but I've had five days now of instant connection to WiFi at home, so something has been freed up.
i can not tell you how seeing this post was like finding bin ladin in the white house. Prob would have found him twice trying to solve this WIFI problem. And the strange thing is this is the 1st phone i have had that there are so few posts about it...is everyone on that icrack? scary. cheers to you...
Thank you for posting this.
I tried this with my and it seems it doesn't make a difference for me. I still can only connect once to the router and for me to connect again i have to restart the router again. Am i missing something?
Problem is when I connect for the first time at home it works then when i leave to the office i use the wifi there and never have any problems there but when i get back home it doesn't work. Do you guys switch the wifi off manually when you are not using it?
one thing that is almost always overlooked is updating the router's firmware. this usually solves a number of issues. I dont know about netgear but it's worth a try to update
bimmerboii said:
one thing that is almost always overlooked is updating the router's firmware. this usually solves a number of issues. I dont know about netgear but it's worth a try to update
Click to expand...
Click to collapse
That was one of the first thing i tried....it seems i have the latest firmware.
Is this an issue for a lot of people then? Ive one of these routers and never had an issue connecting any phones to it. Had 3 nokias and 3 different android phones, currently on the x10, and they all connected fine everytime.
i have some troubles in x10i wifi connection and holp someone helps me~
------------------------------
im chinese, my x10i have had the lastest firmware but the phone cant connect the AP which set the channel is "13". but i used it long before and suddy just one day i find it dosnt work~ it cant scan(and find) the AP anymore !
then i have tried and config the router in another wifi channel(just like 1,8,11..) and the phone can scan and refind the AP.
i have tried to reload the phone's default setting,but it dont work(in channel 13)ToT
---------------------------
someone tell me why? and someone give me some suggest?
in china , lots of router's wifi channel are using "13" by default(factory setting);so, if my x10i cant works in that channel means i couldnt find the "opend APs" which in the public place(like KFC~~)
THX to help~
StampedChipmunk said:
Hello all,
I love my X10, but the frustration with getting it to connect to my Netgear DG834 router was getting to me, so I dedicated an afternoon to working out a solution and I've found one that works for me, so I hope it'll work for you too.
<snip>.
Click to expand...
Click to collapse
Thank you! I have spent three days trying to get my phone to re-connect to a DG834v5.
Your solution has worked! I had gone as far as reserving an IP address on the router and linked it to the MAC of the phone... no dice. The phone would connect once and then never again until the router was reset. Really irritating because I have two PPPoe connections running through the router with a routing table that has to be re-loaded via telnet every time the router is reset. I was considering a new phone or a new router.
HI,
I have near the same problem.
But I found out that when I remove on the access point the hidden function ( SID ) then it works perfect.
so that is a bug in the ROM of the X10, I have the R2b026.
At the moment everone can see my Access Point but I can live with that solution.
Worked for me! Many many thanks this had been infuriating me...
Same problem here - never had an issue with any other router, so I blame Netgear...
Let's just hope this works - it's been driving me crazy for the past 5 days...
Neh, hasn't worked for me....
Stupid freakin' Netgear...
works on the HD2 aswell. Thanks alot!
Not just Netgear, maybe Android
k1sr said:
Same problem here - never had an issue with any other router, so I blame Netgear...
Let's just hope this works - it's been driving me crazy for the past 5 days...
Click to expand...
Click to collapse
I am having the same issue on my HD2 Android 2.3.4, connecting to a D-Link DIR-635. If I use Static IP, everything is fine...
WORKS! I can't believe it, finally i can disconnect and connect without having to reset my router everytime. BIG thanks man!
alright, it worked fine for the first 5-6 hours. then it went back to not connecting without rebooting the router. this problem happens only with my home router, at work i can connect fine, as well as in other places.
any thoughts or solutions? i mean it did work in the beginning, then why did it stop? shall i change my router?
P.S.: i noticed that every time i connect to my home router i get the same IP address and all the stats are the same.
After connecting to 3 different wireless connections and none of then working, I'm concluded that my wifi isn't working.
I go to settings and check wifi on, it finds the network, connects, but I lose my entire data connection for the duration wifi is turned on!
Is anyone else having this problem?
Sent from my Samsung Vibrant
I'm having the same issues with the wifi. I downloaded wifi analyzer to make sure I was on a good channel. Set it to the best channel and my signal strength is 100%. I will be able to connect for a little bit but for some reason it goes in and out, connection unsuccessful, yada yada yada. I messed with all the troubleshooting solutions for my router (dgl-4300) but nothing works. If anyone can reply with a fix or point me in the right direction, that would be greatly appreciated.
Same Issues
Any help is greatly appreciated. Data working fine when on 3G but Wifi = no data. Connection is fine, IP is fine.
UPDATE: It's working again on my home WIFI. Will have to see if it's just an "at work" issue. Hopefully IT can assist.
Same problem with Verizon MiFi
I have had ZERO problems connecting to the Linksys access points we have setup at my home and my office, but recently my work provided me with a Verizon MiFi (as well as an iPad - don't hate ) and I've had MANY issues trying to get my Vibrant to consistently connect to the MiFi.
My iPad, Motorola Droid, and Laptop have no issues connecting to the MiFi.
On my Vibrant I'm running the 2.1 stock ROM with root & the latest ClockWork recovery.
It will "connect" to the MiFi (I use quotes because I can't really tell - it AT LEAST receives an IP). But I'm unable to send and receive data. I can't even browse to the MiFi's internal configuration page .
To FINALLY get it to connect consistently I have to do some kind of random combo toggling the wifi off and back on and then turning the MiFi off and back on and it will EVENTUALLY connect and stay connected with data flowing freely.
I've customized my configuration a little bit on the MiFi so I'm going to reset it back to factory and not change the config to see if it makes a difference - because at lunch I was able to connect to my boss' MiFi with no problem. I'm thinking it may either be the phone or the mifi...
I've connected to about 10 different wireless networks with NO issues, at all. The connectivity is actually much better than my G1/Nexus.
HOWEVER, last night at a bar I was connected to their wifi, strong signal, but I was not able to use Data. I was in a very poor reception area for T-Mobile... don't think that could be an issue, bit the other places I use wi-fi that is not the case.
I just chalked it up as a fluke and moved on. Not sure what was wrong.
I had this happen to me today. I just rebooted and it went away. Toggling wifi didn't help, but I only tried it once. The phone reboots so quick I figured I'd give it a try.
I have set the phone up manually with static ip. Seems like its a problem with the dhcp.
robnil said:
I have set the phone up manually with static ip. Seems like its a problem with the dhcp.
Click to expand...
Click to collapse
I'm gonna try this.
Sent from my SGH-T959 using XDA App
Hi Folks,
I have been postponing this post but nothing ive seemed to do has worked. I THINK after i rooted my issues started. I am unable to browse the net or anything when connected to my wifi. I have reset the router, forgotten and rejoined the network with no avail. All my other devices do not have this issue. Im not really sure what else to say so maybe some of you gurus could pick my brain. Though this is a wifi only issue and on this network. When connected to other networks im fine. My setup is as follows. I have a hard line going from the router the ISP provided in the other end of the house to the router in my room. Like i said my phone is the only device that has issues on this network.
thanks in advance.
Dbrock1980 said:
Hi Folks,
I have been postponing this post but nothing ive seemed to do has worked. I THINK after i rooted my issues started. I am unable to browse the net or anything when connected to my wifi. I have reset the router, forgotten and rejoined the network with no avail. All my other devices do not have this issue. Im not really sure what else to say so maybe some of you gurus could pick my brain. Though this is a wifi only issue and on this network. When connected to other networks im fine. My setup is as follows. I have a hard line going from the router the ISP provided in the other end of the house to the router in my room. Like i said my phone is the only device that has issues on this network.
thanks in advance.
Click to expand...
Click to collapse
That's a pretty strange issue, not sure there is going to be much help... I've had some strange, random issues with my S5. I had issues with wireless, xposed and some other apps after rooting the first time. I got tired of it and used Odin to reflash the stock firmware, then performed a factory reset and rooted afterwords. I haven't had any problems at all after doing this... In all honesty, that's the route I would go if I were you. Sorry I couldn't be more helpful, hope you get sorted out
BadKarma81 said:
That's a pretty strange issue, not sure there is going to be much help... I've had some strange, random issues with my S5. I had issues with wireless, xposed and some other apps after rooting the first time. I got tired of it and used Odin to reflash the stock firmware, then performed a factory reset and rooted afterwords. I haven't had any problems at all after doing this... In all honesty, that's the route I would go if I were you. Sorry I couldn't be more helpful, hope you get sorted out
Click to expand...
Click to collapse
Just wanted to agree with BadKarma on this. I've not had your exact issue, but I have had some similar stuff after rooting originally. I used Odin to go back to stock and rooted again and have been no issues since. Hope it works out. . .
jpk17 said:
Just wanted to agree with BadKarma on this. I've not had your exact issue, but I have had some similar stuff after rooting originally. I used Odin to go back to stock and rooted again and have been no issues since. Hope it works out. . .
Click to expand...
Click to collapse
well i used odin and got back but it turns out it seems to be the router? im on stock with no root and still cant access the net or anything else when im connected to the router. any thoughts on this?
Can you reset the settings in the router via your pc?
Try connecting standing right next to the router. I had this issue with my Note 2 and it ended up being a physical issue with the wireless chip or antennas. It's actually the reason I'm not on a S5.
Not that u want to hear this, but I had to replace my router for the same reason. My router would only pick up certain devices, had to do with hardware and firewall security settings.
Sent from my SM-G900V using XDA Free mobile app
Ok so i changed to security in my router to aes and tkip and i was able to connect and browse the net and so forth. but i just got home and connected and wasnt able to get access to the net again. i tried forgetting network and re-entering it with no luck.
Dbrock1980 said:
Ok so i changed to security in my router to aes and tkip and i was able to connect and browse the net and so forth. but i just got home and connected and wasnt able to get access to the net again. i tried forgetting network and re-entering it with no luck.
Click to expand...
Click to collapse
First and foremost you have to isolate the issue to either ur phone or the router. In order to do that its very simple.... can you connect to wifi outside of your house like starbucks or friends wfii? If the answer is yes than the issue lies solely with your router. Let me know what you find out and I can help guide you <---- systems administrator Also please provide the make and model of your router as well as your modem and your ISP.
EDIT: I just read the line where you talk about having another router in your room. I can already tell you this is probably NOT an issue with your phone but rather your setup. The secondary router must be setup as a repeater or bridge OR on a different subnet. This gets very tricky for average home user and I do not recommend you tackle it on your own. Also your main router has to be able to play nice with the secondary and if it's one provided by your ISP it's probably a POS. Also your phone is probably not the only device having issues with this setup.... its the only one you are noticing having issues. Android OS is very sensitive to weird wifi setups and anything out of the norm will set it off. It's actually a great tool in diagnosing wifi issues.
armeN0317 said:
First and foremost you have to isolate the issue to either ur phone or the router. In order to do that its very simple.... can you connect to wifi outside of your house like starbucks or friends wfii? If the answer is yes than the issue lies solely with your router. Let me know what you find out and I can help guide you <---- systems administrator Also please provide the make and model of your router as well as your modem and your ISP.
EDIT: I just read the line where you talk about having another router in your room. I can already tell you this is probably NOT an issue with your phone but rather your setup. The secondary router must be setup as a repeater or bridge OR on a different subnet. This gets very tricky for average home user and I do not recommend you tackle it on your own. Also your main router has to be able to play nice with the secondary and if it's one provided by your ISP it's probably a POS. Also your phone is probably not the only device having issues with this setup.... its the only one you are noticing having issues. Android OS is very sensitive to weird wifi setups and anything out of the norm will set it off. It's actually a great tool in diagnosing wifi issues.
Click to expand...
Click to collapse
Hi there thanks for the reply. Yes i can connect to any other router without issue. The router is my Router Info:
Name N300 Wireless Router
Model F9K1002v5 (01B)
Firmware 5.00.15(Nov 1 2013)
Serial No. 12349GC2508237
Boot Loader 0.12
I use my tablet and other pcs within this wifi. It is under a different subnet as well. (i think so been a while since ive done any networking) The main router that comes in has the standard IP 192.168.1.1 and the IP for my router in my room (basically set up like this since my room is quite far and gets bad signal from the main router, Cable in -> Main Router -> Hardwire hooked into a port -> ethernet run to my room -> Connected to a port on the wireless router) 192.168.2.1. My ISP is Optimumn Online. My wifi was working fine until about 10 mins ago. seems to happen so often. I did change the security a while back to TKIP + AES on the router and made sure it was the same on the phone and it was working fine for days until like i said about 10 mins ago.
Broadley1 said:
Not that u want to hear this, but I had to replace my router for the same reason. My router would only pick up certain devices, had to do with hardware and firewall security settings.
Sent from my SM-G900V using XDA Free mobile app
Click to expand...
Click to collapse
This leads me to think that perhaps the router (however old or new) may have a setting, or an actual limit, on how many devices connect to it.
If not that, perhaps if you rooted, and tried removing bloat, you may have been a bit overzealous and removed something related to WiFi and are now having this issue as a result.
I have only removed the list of apps and bloat that have been posted on Ricks Rom HERE. The ONLY problem I have seen since removing this list, was that I can no longer access PhotoVault correctly. Gives me an error saying that it has no connection to the database, but my 4G is working fine at the time as I was downloading via steam and streaming a movie, and playing a PC game at the same time...
Dbrock1980 said:
Hi there thanks for the reply. Yes i can connect to any other router without issue. The router is my Router Info:
Name N300 Wireless Router
Model F9K1002v5 (01B)
Firmware 5.00.15(Nov 1 2013)
Serial No. 12349GC2508237
Boot Loader 0.12
I use my tablet and other pcs within this wifi. It is under a different subnet as well. (i think so been a while since ive done any networking) The main router that comes in has the standard IP 192.168.1.1 and the IP for my router in my room (basically set up like this since my room is quite far and gets bad signal from the main router, Cable in -> Main Router -> Hardwire hooked into a port -> ethernet run to my room -> Connected to a port on the wireless router) 192.168.2.1. My ISP is Optimumn Online. My wifi was working fine until about 10 mins ago. seems to happen so often. I did change the security a while back to TKIP + AES on the router and made sure it was the same on the phone and it was working fine for days until like i said about 10 mins ago.
Click to expand...
Click to collapse
You have the right setup with a different subnet. It's possible the main router is assigning the same IP address that your router has to another device. It would be best if you picked up another router that has repeater capabilities and set it up in repeater mode. Also reserve an IP address for your router from the main router to avoid IP conflicts.
Another possibility is simply the wifi on your router is deteriorating and it's time for a replacement. I recommend the Netgear Nighthawk R7000 if you don't mind spending the $$$. If your on a bit of a budget the Netgear N900 (WNDR4500v2) is the next best thing that supports repeater mode.
well its been still working intermediary. I have to unplug the router and plug it back in then i can browse the net on my phone. idk if id like to lay out that kind of money for a new router. there has to be something else thats causing it. i set the router to reboot everyday, also my phone. its odd though. sometimes it works sometimes it dosent.