Related
does anyone know of a company or repair service that will unbrick my hermes?
thanks
Whats wrong, maybe we can help...
Give us a brief rundown on whats wrong, and what you did to fix...
Well first of all,
the phone was bricked through unable to flash a rom
i didn't get a chance to check the SPL and IPL before the phone was bricked
the phone is only showing bootloader and the ok+power+soft reset doesn't work
ive tried the micro sd method and didn't work
i had just barely got the phone and was a noob at it so like every other person who doesn't take the time to read, didn't put the Hard SPL on the device.
i don't know what else to do now.
thanks for replying
Download the original SHIPPED rom.
Untick "allow usb connection" in activesync on your PC.
Reset into bootloader - hold power, OK button above flywheel and rset with stylus. This should bring you to thr tri-colour screen wher your IPL and SPL are shown. This is true bootloader, not a screwed up version. DO THIS...
Connect Hermes to pc.
Run RUU-Wrapper.exe of original rom.
This may or may not woirk, Good luck...
IF this works, go here - http://forum.xda-developers.com/showthread.php?t=296722
Download Hard SPL V7 & install it. Then you can use sd card method to flash roms, I find it safer...
Cheers...
ultramag69 said:
Download the original SHIPPED rom.
Untick "allow usb connection" in activesync on your PC.
Reset into bootloader - hold power, OK button above flywheel and rset with stylus. This should bring you to thr tri-colour screen wher your IPL and SPL are shown. This is true bootloader, not a screwed up version. DO THIS...
Connect Hermes to pc.
Run RUU-Wrapper.exe of original rom.
This may or may not woirk, Good luck...
IF this works, go here - http://forum.xda-developers.com/showthread.php?t=296722
Download Hard SPL V7 & install it. Then you can use sd card method to flash roms, I find it safer...
Cheers...
Click to expand...
Click to collapse
dude, thanks a lot!
last time my PPC was stuck at bootloading ( I guess my Hermes 100 can't support M2d due to lack of RAM ). Then I do the step as u mention, n it work!
Thank God. I'm feel relief now, knowing my PPC is revive.
ultramag69 said:
Download the original SHIPPED rom.
Untick "allow usb connection" in activesync on your PC.
Reset into bootloader - hold power, OK button above flywheel and rset with stylus. This should bring you to thr tri-colour screen wher your IPL and SPL are shown. This is true bootloader, not a screwed up version. DO THIS...
Connect Hermes to pc.
Run RUU-Wrapper.exe of original rom.
This may or may not woirk, Good luck...
IF this works, go here - http://forum.xda-developers.com/showthread.php?t=296722
Download Hard SPL V7 & install it. Then you can use sd card method to flash roms, I find it safer...
Cheers...
Click to expand...
Click to collapse
See the problem that i have with that is the fact that i don't know what my original rom was, all i know was that it was an htc windows mobile 5 rom, but i don't know what version..
could it help if i told you that it is a qtek 9600 (herm100)?
Owh, forgot to mention.
I already applied hardSPL. I guess thats why the process of recovering it quite simple. N I directly flash the ROM to WM6.1 v13.3 Cooked Rom. It works like a charm.
Bo0mcxh402 : sorry mate. I didn't know the original version of ur ROM. Maybe u can try to ask around. I'm sure there've lot of users out there also using the same phone as yours,
Try the HTC stock WM06 rom which you should be able to find somewhere on here... May work...
Cheers...
Bo0mcxh402 said:
See the problem that i have with that is the fact that i don't know what my original rom was, all i know was that it was an htc windows mobile 5 rom, but i don't know what version..
could it help if i told you that it is a qtek 9600 (herm100)?
Click to expand...
Click to collapse
It's irrelevant what your original ROM was/is. Follow these directions and use the T-Mobile ROM.
The T-Mobile ROM won't install. It will go thru a couple of steps (one of which is "Erasing" which is critical to get through) and then it will "Error" out. After the T-Mobile ROM "erases", your Hermes should be back to a state where you can flash any ROM you prefer.
Timtown said:
It's irrelevant what your original ROM was/is. Follow these directions and use the T-Mobile ROM.
The T-Mobile ROM won't install. It will go thru a couple of steps (one of which is "Erasing" which is critical to get through) and then it will "Error" out. After the T-Mobile ROM "erases", your Hermes should be back to a state where you can flash any ROM you prefer.
Click to expand...
Click to collapse
Well i Tried the method, but i can't even get the phone to sync even after i unticked the "Allowed USB connections," the phone is recognized as "HTC usb connection" but when i run the t-mobile rom, it says error 264, (USB Connection)
The reason I said to use the shipped rom is because Bo0mcxh402's device ISN'T supercid... If it was it could take ANY rom you want to throw at it BUT because its not you HAVE to have the STOCK CARRIER ROM it was shipped with (later update may work too as the cid should be recognised)...
Cheers...
Bo0mcxh402 said:
Well i Tried the method, but i can't even get the phone to sync even after i unticked the "Allowed USB connections," the phone is recognized as "HTC usb connection" but when i run the t-mobile rom, it says error 264, (USB Connection)
Click to expand...
Click to collapse
Did the T-Mobile ROM do *anything* or just immediately error out?
Timtown said:
Did the T-Mobile ROM do *anything* or just immediately error out?
Click to expand...
Click to collapse
I couldn't do anything because the t-mobile rom didn't recognize my hermes even though my computer did
That pesky CID again as stated so many times before. You need to find your stock carrier rom. The upgrade to WM06 will work as well as it has the same CID as the shipped rom.
ultramag69 said:
That pesky CID again as stated so many times before. You need to find your stock carrier rom. The upgrade to WM06 will work as well as it has the same CID as the shipped rom.
Click to expand...
Click to collapse
well i ended up trying that and nothing happened... the usb connection didn't work for the hermes, i know that there is nothing wrong with the usb connection because i used it on my t-mobile dash.
IVE GIVEN UP.. IS THERE A COMPANY FOR A REASONABLE PRICE THAT WILL UNBRICK THE PHONE?
On the PC - Untick "Allow usb connections" in activesync settings.
On Hermes - Hold OK button, power button and reset with stylus. This will bring you back to bootloader BUT it won't be the screwy bad flash bootloader.
Connect the Hermes to the PC via usb. Run the RUU_Wrapper.exe of the stock rom.
This should work, if it doesn't then there may be no help available. You don't want activesync trying to connect to the Hermes so its better to disable the usb connection settings, You might be able to get a successful flash this way without activesync screwing it up.
Can't say about any unbrick service. Don't think they could help, only thing they might do is replace the mainboard (if they can find) and that would be expensive.
Cheers...
Hello. This is my first time when I'm upgrading my Blackstone ROM and I get some problems so I cannot upgrade it
I think the problem is with active sync, but just I think like that maybe I'm wrong. First of all my active sync cannot connect the phone if the box is ticked for "Enable Faster Data Sync" I tried to reinstall active sync, version still not working. When the box is not ticked the active sync connect the phone but when I go into Rom upgrade setup and try to upgrade the ROM the phone restarts ant freezes in 0% of upgrade, then I get a windows with Connection Error. I take the battery out ant turn on my phone normally again.
Do you know how to solve this error? Or can you tell me other ways which I can upgrade my ROM? I know that its possible to upgrade via memory card but I don't know how. Thank you!
dnlaod any ROM, extract the file then u'll see a file named "ruu_signed.nbh"
change its name to "BLACIMG.nbh" then put it into ur storage card.
Go to bootloader mode then press power button n wait.. after ROM upgrade jus Hard reset it..
PS : read the WIKI
Sw1pe said:
Hello. This is my first time when I'm upgrading my Blackstone ROM and I get some problems so I cannot upgrade it
I think the problem is with active sync, but just I think like that maybe I'm wrong. First of all my active sync cannot connect the phone if the box is ticked for "Enable Faster Data Sync" I tried to reinstall active sync, version still not working. When the box is not ticked the active sync connect the phone but when I go into Rom upgrade setup and try to upgrade the ROM the phone restarts ant freezes in 0% of upgrade, then I get a windows with Connection Error. I take the battery out ant turn on my phone normally again.
Do you know how to solve this error? Or can you tell me other ways which I can upgrade my ROM? I know that its possible to upgrade via memory card but I don't know how. Thank you!
Click to expand...
Click to collapse
have u updated ur SPL... or r u using USPL..
IF u have then just boot into the boot loader and connect to USB and flash..
ignore the RUU saying that u need to be connected in active sync...
Moved out of development
cvchetan said:
have u updated ur SPL... or r u using USPL..
IF u have then just boot into the boot loader and connect to USB and flash..
ignore the RUU saying that u need to be connected in active sync...
Click to expand...
Click to collapse
I don't even know what SPL or USPL is. I told you this is my first time so i don't know those sort words. Can you explain properly what is those spl or uspl? thanks
bjy8138 said:
dnlaod any ROM, extract the file then u'll see a file named "ruu_signed.nbh"
change its name to "BLACIMG.nbh" then put it into ur storage card.
Go to bootloader mode then press power button n wait.. after ROM upgrade jus Hard reset it..
PS : read the WIKI
Click to expand...
Click to collapse
Thanks! I'm going to try your way today when I'm gonna come back to my home.
Sw1pe said:
I don't even know what SPL or USPL is. I told you this is my first time so i don't know those sort words. Can you explain properly what is those spl or uspl? thanks
Click to expand...
Click to collapse
This is all explained in the wiki. Before you do anything, best advice I can give you is to read up on SPL, USPL first!!!
Also, if you follow cRaCKwHoRe's guide (see my signature) you cannot go wrong.
Fallen Spartan said:
This is all explained in the wiki. Before you do anything, best advice I can give you is to read up on SPL, USPL first!!!
Also, if you follow cRaCKwHoRe's guide (see my signature) you cannot go wrong.
Click to expand...
Click to collapse
Ok. I will read it later. Thanks!
I'm still having a problem I have have read a wiki and I follow Dummies guide steps but I'm still having a same problem ( Stuck at 0% )
HSPL1 - Downloads
* (HSPL1a) HSPLWrapper_Blackstone_156OliNex.zip
* (HSPL1b) A 1.56+ based rom- Dutty's XT 3.7 linked here
* (HSPL1c) BlackstoneRUUWrapper.zip
* (HSPL1d) Extract each item to its own folder
HSPL2 - Flash new SPL (1.56.OliNex)
* (HSPL2a) Place your phone into its bootloader.
* (HSPL2b) Run HSPLWrapper_Blackstone_156OliNex.exe from the download in step (HSPL1a) and follow it as normal.
I follow these steps but at the last one my phones just freezes at 0% of update, so I can update to 1.56.OliNex SPL
Is me here doing something wrong or is it something wrong with my phone?
Does any one know whats wrong?
never mind. fixed by my self
Sw1pe said:
never mind. fixed by my self
Click to expand...
Click to collapse
how?? i have same problems..
Hello everyone!
I got a HTC Prophet with english windows mobile. I've wanted to install a german ROM, and used this:
http://www.handy-faq.de/forum/htc_p...ophet_touch_ix_rom_deutsch_download_1005.html
I've runned a .bat file and the installation startet. But then i closed the window with the installation insinde (undeliberate). and now the prophet won't load windows. it always stops at the boot screen, where the infos are:
IPL 2.15.0001
SPL 2.20.0001
I can run the BootLoader mode and connect the Prophet to my PC. on the left bottom it says "USB" but when I run the installation again it says "no device connected".
i got windows 7 ultimate in 32bit version.
I hope you can help me, 'cause it's the phone from my dad and i won't get him angry
Greetings from Germany!
Bianca
geffi said:
Hello everyone!
I got a HTC Prophet with english windows mobile. I've wanted to install a german ROM, and used this:
http://www.handy-faq.de/forum/htc_p...ophet_touch_ix_rom_deutsch_download_1005.html
I've runned a .bat file and the installation startet. But then i closed the window with the installation insinde (undeliberate). and now the prophet won't load windows. it always stops at the boot screen, where the infos are:
IPL 2.15.0001
SPL 2.20.0001
I can run the BootLoader mode and connect the Prophet to my PC. on the left bottom it says "USB" but when I run the installation again it says "no device connected".
i got windows 7 ultimate in 32bit version.
I hope you can help me, 'cause it's the phone from my dad and i won't get him angry
Greetings from Germany!
Bianca
Click to expand...
Click to collapse
Hi this is a easy problem to fix dont worry but first u need to read this http://forum.xda-developers.com/showthread.php?t=353547 you need to hardspl your device first then install the NVID rom in the link read the recovery solutions carefully oh and about active synce try this
Go in to Active Synce settings and uncheck allow usb connections that will help to detect your device when flashing the NVID rom after that just use any flashing tool to install the rom on your device problem solved just read the link if u dont understand as this happened to all of us before so we understand how u must feel
Hope this helps
Heya and thanks for your answer!
I did read the terms of use in the post u linked, but I got always the same problem:
No device is found. on the BootLoaderScreen it says "USB" and Windows 7 detected the Mobile Phone.
But the HardSPL didn't found the phone
I try to take the battery out and put it in after one minute, but it didn't work
geffi said:
Heya and thanks for your answer!
I did read the terms of use in the post u linked, but I got always the same problem:
No device is found. on the BootLoaderScreen it says "USB" and Windows 7 detected the Mobile Phone.
But the HardSPL didn't found the phone
I try to take the battery out and put it in after one minute, but it didn't work
Click to expand...
Click to collapse
Did you try flashing the NVID - AKU 2.* WM5 rom for recovering your Prophet on your device first then hardSPL your device? you need to install the rom first then hardspl it after that flash any other rom here http://www.4shared.com/file/57952591/3955ed98/NVID_RUU.html?dirPwdVerified=2948f2e flash this to your device and remember to uncheck allow USB Connections in active sync and just it should work if u still need more help al be happy to help you out and since ur using windows 7 use this tool to flash any rom to your device ok http://forum.xda-developers.com/showthread.php?t=534707 since am using both vista and xp and they work well so remember flash the NVID rom first then hardspl and try flashing back the rom you wanted to use on your device ok
hey!
i installted Windows XP and then load the HTC Prophet in BootLoaderMode.
I do HardSPL and it works. Then I install thisNVID. The phone rebootet, but windows didn't load. when i try to install the rom (i posted the link in first post) but it says already, that no device is connected.
the phone didn't load windows
geffi said:
hey!
i installted Windows XP and then load the HTC Prophet in BootLoaderMode.
I do HardSPL and it works. Then I install this NVID. The phone rebootet, but windows didn't load. when i try to install the rom (i posted the link in first post) but it says already, that no device is connected.
the phone didn't load windows
Click to expand...
Click to collapse
Sorry but first you need to recover your device by first installing the NVID rom and good u have windows xp did you did what i said about active sync uncheck allow usb connects then flash the NIV rom then use lazytool thats what i use on my windows xp to flash the rom u wana use what happened when u try to install the NVID rom? first you must manualy go too the bootloader menu in other to flash it you know reset the device and hold both the commanager and camura button until you enter the bootloader menu then flash the NVID rom if it works then do a hardspl then flash any roms using lazytool it should work when u said the phone rebooted but windows did not run what did you see on the screen? after the reboot? also the NVID rom is windows mobile 5 so you device should boot up windows but al look into this for you ok
PS this is important you should know that your device is G3 or G4 and from the looks of you spl it looks like a G4 device this is very important beouse if u flashed with G3 you can damage ur device but dont worry the guys here have managed to fix this so if ur flashing any rom use the G4 option ok but please look over these instructions http://forum.xda-developers.com/showthread.php?t=353547 as they helped me when i had the same problem
I just Private message you check ur inbox
Hi guys!!
Is there any way to full format htc hd device without using task29?
Two weeks ago I flashed ROM via SD card, and since then ActiveSync doesn't work and I can't establish connection with my HTC HD and computer.
Now I can flash ROM only through an SD card. When I get into Bootloader mode does not recognize USB, but remains on the Serial....
Hard reset does not help because it only erase contacts, emails and other crap. I need something to wipe the device.
Any possible ideas??!!! Please....
didnt you by any chance disable USB connection in your activesync settings?
check that, maybe that prevents you from connecting...
if that's not the case, try updating your drivers...
if that fails, then AFAIK Task29 is the only way to format your device...
I tried to change everything in USB2PC and it didn't work. I took the device to servis and the repairman told me that he doesn't know what is the problem. He thought that maybe some port is broken or something like that and will replace it but none of that. Everything in device works fine. That he told me.
I think I made a mistake. When I flashed ROM via SD it all went great but in the end (after message: update complete 100%) I didn't make a soft reset. Instead I pulled the battery out to re-started device. Could it be the reason?!?!
So this AFAIK task29... what does it mean?!?!
how can i do this?! can you be more specific, some steps or something... please
and thank you for reply
oh yes, and i forgot to mention, when I connect device to PC it start to chargining battery normaly so can't be problem with USB cable as well
be sure to check your activesync or Windows Mobile Device Center settings...click the settings for mobile device or similiar and make sure Allow USB connection is checked...
AFAIK means "as far as I know"..
Task29 is a process with which you can completely erase your system partition...this little process solves a lots of issues..
Let me help you out.
First of all, connect your phone via USB to computer in bootloader.
Run USPL
Download the attached package - it is Task29 with Blackstone Radio 1.17
Extract archives and run Task29.exe
Follow the instructions - it is the same as flashing process
After task29 your phone will reboot but wont boot because there is no OS.
Take out battery and get into bootloader again.
Connect to PC via USB, run USPL and flash your favorite ROM.
I recommend Topix or Duttys.
Let me know if this worked out for you.
PS: Sorry that there are so many archives but I could not get it to smaller size
PS: Also do not forget to backup the data!!! this erases completely everything...
Sopis said:
be sure to check your activesync or Windows Mobile Device Center settings...click the settings for mobile device or similiar and make sure Allow USB connection is checked...
AFAIK means "as far as I know"..
Task29 is a process with which you can completely erase your system partition...this little process solves a lots of issues..
Let me help you out.
First of all, connect your phone via USB to computer in bootloader.
Run USPL
Download the attached package - it is Task29 with Blackstone Radio 1.17
Extract archives and run Task29.exe
Follow the instructions - it is the same as flashing process
After task29 your phone will reboot but wont boot because there is no OS.
Take out battery and get into bootloader again.
Connect to PC via USB, run USPL and flash your favorite ROM.
I recommend Topix or Duttys.
Let me know if this worked out for you.
PS: Sorry that there are so many archives but I could not get it to smaller size
PS: Also do not forget to backup the data!!! this erases completely everything...
Click to expand...
Click to collapse
OR You can try to flash a Stock ROM from SD ... probably works like Task29
Try using MTTY. Check firs for bad blocks. There is a command that will format the device.
Check Hermes WIKI, there are a lot of explanations about MTTY and how to use it. Also there are explanations about commands. Just be careful, you can destroy your device.
As far as I know mtty works on all win devices.
Cheers
I can't use anything...
The device can't recognize USB when I connect usb cable with it (it stays on SERIAL in bootloader), so I can't use task29, MTTY or similar applications or even flash new rom with RUU.
I think there is a malfunction on motherboard.
I tried to flash a stock rom with stock SPL 1.14 and this what happened:
It stays in bootloader mode with this error report
BLAC100 32M
SPL-1.14.0000
MicroP-BlackStone (LED) v6
Upgrade ROM code error
Please try again (in green field)
I tried to flash stock rom again and I get error code 00028002.
Stock ROM can't be flashed through SD card so now I can't use my guarantee......
so what do you do next to fix ..sorry my ingles
sollution!!
delete your previous connections in activesync, and then you need to HARDSPL your device, and after that you will be able to install romms from your sd card
there is a Thread for Task 29 for the Blackstone, please refer to it to minimize
redundancy.
jigners said:
there is a Thread for Task 29 for the Blackstone, please refer to it to minimize
redundancy.
Click to expand...
Click to collapse
As per above post, please use existing Task29 thread
Thread closed
hey guys..hope to be in a good health
this is my first theard ever here.. and honstly i found xda more useful,more likly to me rather than any websits else..so i'd like to thank guys here "u rocks guys "
now i'd like to ask about flashing anew rom for my HTC touch HD t8282
running win-mo 6.1 with arabic supported language..touch flow 3d..etc
but now i'm bored with original rom and i was looking for some roms around here and i found what i excatly wanted
but..(i'm sorry for that question :$) i dun know how to flash a new rom to my blackstone..i used search fuction and dummies guide also but..rofl i didn't get what they were takin about
so i was asking if someone could provide me with smplified way to install a new rom using HSPL
Thanks in advance and sorry for z long topic
basically, flashing a winmo phone is an easy process:
1. bootloader mode (power on with VOL- button pressed)
2. flashing
3. hard reset
however, there are a few preparations if your device was never flashed before, you need to install hspl on your phone and make sure you have the correct driver installed on your pc. the driver for the device in bootloader mode might vary from the driver used to sync the device, when switched on.
1. the driver:
if you have windows xp, connect the phone in bootloader mode and look, whether it changes from serial to usb on the bootloader screen, you should be fine by then.
on windows vista/7 you connect the device in bootloader mode, and might actually take some time for it to download another driver from windows update. if it changes from serial to usb, first try to connect using mtty, before attempting to flash, because the connection might not yet be stable and you might want to have a look at the thread (ref updating the usb drivers).
2. hspl
to quote the dummies' guide thread:
(HSPL2a) Place your phone into its bootloader.
(HSPL2b) Run HSPLWrapper_Blackstone_156OliNex.exe from the download in step (HSPL1a) and follow it as normal.
(HSPL2c) If successful, go to step HSPL3. If the flashing process sits at 0% and you get Error [260] connection after some time, go to step (Troubleshooting).
pretty easy, in other words, just connect the device in bootloader mode and run the package on the pc, it will unlock the spl and flash hspl.
if all went well, you are ready to flash, download any rom you like from the rom development section, and flash it using the .exe file that comes with them, might be updater.exe, blackstone RUU.exe or something else. if your rom download only consists of an .nbh file, like ruu_signed.nbh or BLACIMG.nbh, download advanced RUU and use it to flash.
alternatively, if this is to complicated for you as a beginner, you can rename the rom file to BLACIMG.nbh (if it is not already named like that) and put it in the root of the sd card, by then entering bootloader mode, it should find the rom and give you detailed instructions on how to install it.
last step, hard reset, as described in the original manual, switch on, while pressing VOL- and VOL+ and follow the instructions onscreen.
Chef_Tony said:
basically, flashing a winmo phone is an easy process:
1. bootloader mode (power on with VOL- button pressed)
2. flashing
3. hard reset
however, there are a few preparations if your device was never flashed before, you need to install hspl on your phone and make sure you have the correct driver installed on your pc. the driver for the device in bootloader mode might vary from the driver used to sync the device, when switched on.
1. the driver:
if you have windows xp, connect the phone in bootloader mode and look, whether it changes from serial to usb on the bootloader screen, you should be fine by then.
on windows vista/7 you connect the device in bootloader mode, and might actually take some time for it to download another driver from windows update. if it changes from serial to usb, first try to connect using mtty, before attempting to flash, because the connection might not yet be stable and you might want to have a look at the thread (ref updating the usb drivers).
2. hspl
to quote the dummies' guide thread:
(HSPL2a) Place your phone into its bootloader.
(HSPL2b) Run HSPLWrapper_Blackstone_156OliNex.exe from the download in step (HSPL1a) and follow it as normal.
(HSPL2c) If successful, go to step HSPL3. If the flashing process sits at 0% and you get Error [260] connection after some time, go to step (Troubleshooting).
pretty easy, in other words, just connect the device in bootloader mode and run the package on the pc, it will unlock the spl and flash hspl.
if all went well, you are ready to flash, download any rom you like from the rom development section, and flash it using the .exe file that comes with them, might be updater.exe, blackstone RUU.exe or something else. if your rom download only consists of an .nbh file, like ruu_signed.nbh or BLACIMG.nbh, download advanced RUU and use it to flash.
alternatively, if this is to complicated for you as a beginner, you can rename the rom file to BLACIMG.nbh (if it is not already named like that) and put it in the root of the sd card, by then entering bootloader mode, it should find the rom and give you detailed instructions on how to install it.
last step, hard reset, as described in the original manual, switch on, while pressing VOL- and VOL+ and follow the instructions onscreen.
Click to expand...
Click to collapse
thnx 4 help really usefull and easy,i apperciate it
thnx again
@ blackspyker
did you successfully flash the hspl and a new rom?
(just seeing if this thread is solved or not)
Rn
just like me dear, please help us. but mine is English version
just like me dear, please help us. but mine is English version
blackspyker said:
hey guys..hope to be in a good health
this is my first theard ever here.. and honstly i found xda more useful,more likly to me rather than any websits else..so i'd like to thank guys here "u rocks guys "
now i'd like to ask about flashing anew rom for my HTC touch HD t8282
running win-mo 6.1 with arabic supported language..touch flow 3d..etc
but now i'm bored with original rom and i was looking for some roms around here and i found what i excatly wanted
but..(i'm sorry for that question :$) i dun know how to flash a new rom to my blackstone..i used search fuction and dummies guide also but..rofl i didn't get what they were takin about
so i was asking if someone could provide me with smplified way to install a new rom using HSPL
Thanks in advance and sorry for z long topic
Click to expand...
Click to collapse
download this, extract all the files, take micro SD out of device, connect device to active sync and then run HardSPLWrapper_Blackstone.exe on your pc, it will now start to flash a new SPL, when complete confirm you got it installed, go into bootloader mode (tricolour screen! {hold volume down and press the reset button under the back cover}) now verify the screen shows 1.56.OliNex, which is the new Hard-SPL version.
when complete you will be able to flash any rom to your touch hd/blackstone
note: if you do not flash a new rom you will have graphical issues with the current rom, however this gets fixed as soon as you flash a new rom
if you have any trouble, click me and go to the first post
good luck