does anyone know of a company or repair service that will unbrick my hermes?
thanks
Whats wrong, maybe we can help...
Give us a brief rundown on whats wrong, and what you did to fix...
Well first of all,
the phone was bricked through unable to flash a rom
i didn't get a chance to check the SPL and IPL before the phone was bricked
the phone is only showing bootloader and the ok+power+soft reset doesn't work
ive tried the micro sd method and didn't work
i had just barely got the phone and was a noob at it so like every other person who doesn't take the time to read, didn't put the Hard SPL on the device.
i don't know what else to do now.
thanks for replying
Download the original SHIPPED rom.
Untick "allow usb connection" in activesync on your PC.
Reset into bootloader - hold power, OK button above flywheel and rset with stylus. This should bring you to thr tri-colour screen wher your IPL and SPL are shown. This is true bootloader, not a screwed up version. DO THIS...
Connect Hermes to pc.
Run RUU-Wrapper.exe of original rom.
This may or may not woirk, Good luck...
IF this works, go here - http://forum.xda-developers.com/showthread.php?t=296722
Download Hard SPL V7 & install it. Then you can use sd card method to flash roms, I find it safer...
Cheers...
ultramag69 said:
Download the original SHIPPED rom.
Untick "allow usb connection" in activesync on your PC.
Reset into bootloader - hold power, OK button above flywheel and rset with stylus. This should bring you to thr tri-colour screen wher your IPL and SPL are shown. This is true bootloader, not a screwed up version. DO THIS...
Connect Hermes to pc.
Run RUU-Wrapper.exe of original rom.
This may or may not woirk, Good luck...
IF this works, go here - http://forum.xda-developers.com/showthread.php?t=296722
Download Hard SPL V7 & install it. Then you can use sd card method to flash roms, I find it safer...
Cheers...
Click to expand...
Click to collapse
dude, thanks a lot!
last time my PPC was stuck at bootloading ( I guess my Hermes 100 can't support M2d due to lack of RAM ). Then I do the step as u mention, n it work!
Thank God. I'm feel relief now, knowing my PPC is revive.
ultramag69 said:
Download the original SHIPPED rom.
Untick "allow usb connection" in activesync on your PC.
Reset into bootloader - hold power, OK button above flywheel and rset with stylus. This should bring you to thr tri-colour screen wher your IPL and SPL are shown. This is true bootloader, not a screwed up version. DO THIS...
Connect Hermes to pc.
Run RUU-Wrapper.exe of original rom.
This may or may not woirk, Good luck...
IF this works, go here - http://forum.xda-developers.com/showthread.php?t=296722
Download Hard SPL V7 & install it. Then you can use sd card method to flash roms, I find it safer...
Cheers...
Click to expand...
Click to collapse
See the problem that i have with that is the fact that i don't know what my original rom was, all i know was that it was an htc windows mobile 5 rom, but i don't know what version..
could it help if i told you that it is a qtek 9600 (herm100)?
Owh, forgot to mention.
I already applied hardSPL. I guess thats why the process of recovering it quite simple. N I directly flash the ROM to WM6.1 v13.3 Cooked Rom. It works like a charm.
Bo0mcxh402 : sorry mate. I didn't know the original version of ur ROM. Maybe u can try to ask around. I'm sure there've lot of users out there also using the same phone as yours,
Try the HTC stock WM06 rom which you should be able to find somewhere on here... May work...
Cheers...
Bo0mcxh402 said:
See the problem that i have with that is the fact that i don't know what my original rom was, all i know was that it was an htc windows mobile 5 rom, but i don't know what version..
could it help if i told you that it is a qtek 9600 (herm100)?
Click to expand...
Click to collapse
It's irrelevant what your original ROM was/is. Follow these directions and use the T-Mobile ROM.
The T-Mobile ROM won't install. It will go thru a couple of steps (one of which is "Erasing" which is critical to get through) and then it will "Error" out. After the T-Mobile ROM "erases", your Hermes should be back to a state where you can flash any ROM you prefer.
Timtown said:
It's irrelevant what your original ROM was/is. Follow these directions and use the T-Mobile ROM.
The T-Mobile ROM won't install. It will go thru a couple of steps (one of which is "Erasing" which is critical to get through) and then it will "Error" out. After the T-Mobile ROM "erases", your Hermes should be back to a state where you can flash any ROM you prefer.
Click to expand...
Click to collapse
Well i Tried the method, but i can't even get the phone to sync even after i unticked the "Allowed USB connections," the phone is recognized as "HTC usb connection" but when i run the t-mobile rom, it says error 264, (USB Connection)
The reason I said to use the shipped rom is because Bo0mcxh402's device ISN'T supercid... If it was it could take ANY rom you want to throw at it BUT because its not you HAVE to have the STOCK CARRIER ROM it was shipped with (later update may work too as the cid should be recognised)...
Cheers...
Bo0mcxh402 said:
Well i Tried the method, but i can't even get the phone to sync even after i unticked the "Allowed USB connections," the phone is recognized as "HTC usb connection" but when i run the t-mobile rom, it says error 264, (USB Connection)
Click to expand...
Click to collapse
Did the T-Mobile ROM do *anything* or just immediately error out?
Timtown said:
Did the T-Mobile ROM do *anything* or just immediately error out?
Click to expand...
Click to collapse
I couldn't do anything because the t-mobile rom didn't recognize my hermes even though my computer did
That pesky CID again as stated so many times before. You need to find your stock carrier rom. The upgrade to WM06 will work as well as it has the same CID as the shipped rom.
ultramag69 said:
That pesky CID again as stated so many times before. You need to find your stock carrier rom. The upgrade to WM06 will work as well as it has the same CID as the shipped rom.
Click to expand...
Click to collapse
well i ended up trying that and nothing happened... the usb connection didn't work for the hermes, i know that there is nothing wrong with the usb connection because i used it on my t-mobile dash.
IVE GIVEN UP.. IS THERE A COMPANY FOR A REASONABLE PRICE THAT WILL UNBRICK THE PHONE?
On the PC - Untick "Allow usb connections" in activesync settings.
On Hermes - Hold OK button, power button and reset with stylus. This will bring you back to bootloader BUT it won't be the screwy bad flash bootloader.
Connect the Hermes to the PC via usb. Run the RUU_Wrapper.exe of the stock rom.
This should work, if it doesn't then there may be no help available. You don't want activesync trying to connect to the Hermes so its better to disable the usb connection settings, You might be able to get a successful flash this way without activesync screwing it up.
Can't say about any unbrick service. Don't think they could help, only thing they might do is replace the mainboard (if they can find) and that would be expensive.
Cheers...
Related
Hello,
Well to explain my problem. I had the RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID flashed onto my O2 XDA Neo. No problems, but sometimes I couldn't go back to desktop because "programms" didn't want to close. So I went to look for a dutch firmware. I found one and tried it. It didn't work, but my XDA Neo was already at 1% and didn't go further. So I pulled the cable out of the telephone. Now it doens't pass the red, green, blue screen when starting the phone. Hard reset doens't help eather. Wenn I connect it to the computer, activesync says "not connected".
On the screen it says:
RUU
IPL 2.15.0001
SPL 2.15.0001
Please help me out, because I really don't know what to do anymore
Encountered your case before while trying to downgrade with no success.
I suggest you try to turn back to dopod wwe rom and install it again before further attempts to brick your device.
Active sync tells it's not connected, that's normal because you connect a device which has no rom now.
You should see "USB" at the bottom of the screen once connecting to PC. Then start the rom update.
It will try to discover what's in your pda and will report you "nothing", which is logic. Click update and go. It should proceed...
Good luck.
g3k said:
Encountered your case before while trying to downgrade with no success.
I suggest you try to turn back to dopod wwe rom and install it again before further attempts to brick your device.
Active sync tells it's not connected, that's normal because you connect a device which has no rom now.
You should see "USB" at the bottom of the screen once connecting to PC. Then start the rom update.
It will try to discover what's in your pda and will report you "nothing", which is logic. Click update and go. It should proceed...
Good luck.
Click to expand...
Click to collapse
Thank you so much! I reflashed my old rom, and the device works fine again. But is it not possible to run an older rom? I would like to have the dutch version.
If your device is Sim unlocked, you may try the famous specific rom availIable at:
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=437&PN=1&TPN=1
This rom is for downgrading in a first step and cid unlocking in the second step exclusively and not for continous use . Once these two task are done, you can install any ROM you want.
Reminder: You can not install other language without CID unlocking.
g3k said:
Reminder: You can not install other language without CID unlocking.
Click to expand...
Click to collapse
It is not true. You can install any language ROM using NoVendorID patched reflashing utility.
Yes and no!
If the ROM to write is never "patched rom update utility" will bypass the CID check step and continue to install.
But it the new rom is older (ie 2.09 to write over 2.13) problems start there and you get an error in most cases. In that case we need to downgrade.
I've faced and practiced both cases.
Thanks for details...
Hi,
I started a new thread because on my previous post I did not receive that much reactions so I try a brand new one.
A few months ago I bought this, in my eyes, really cool HTC Trinity, aka the P3600. One of the main reasons I bought this device was because I read on some forums that this device had GPS functionality, but at that time it was not supported/ebabled yet by HTC but properbly would be in the future. Off course I could not wait, so I tried to install a Dopod version which should enable GPS functionality. Unfortunately I've got a Dutch version of WM5 running on my PDA, so a ROM upgrade was not possible, unless the CID lock is removed. In order to accomplish that I downloaded the tool SSPL, installed it, and executed it on my PDA. After that I tried to install the Dopod ROM, but during the upgrade it froze up. After rebooting, the device frooze up during the startup (when it is display the MS logo for push mail). After that I retried the to run the update, but unlucky me, it stucks at 1%, then device reboots, and I receive the "ERROR [294] : INVALID VENDER ID". on the screen of my PC. My PDA is now worthless because it still freezes up during tje startup.
I' m still able to access the bootloader menu however but none of the ROM updates that I have at my dispossal are working. Unfortunately I do not have the Dutch ROM in my possesion and a quest on the Internet lead to nothing. However, this week I will receive a Trinity at my work (exactely the same). Is it possible to make a backup of this ROM and then restore it back to my nearly dead PDA? Or should i deal with this dead PDA in anoter way to bring it back to live again.
Any help is more the welcome
Follow this thread to CID unlock then just re flash. This should take care of your invlaid vender issue.
http://forum.xda-developers.com/showthread.php?t=293957
RebelShadow said:
Follow this thread to CID unlock then just re flash. This should take care of your invlaid vender issue.
http://forum.xda-developers.com/showthread.php?t=293957
Click to expand...
Click to collapse
JolietJake's Trin is not booting to OS, he can't run SSPL
stepw said:
JolietJake's Trin is not booting to OS, he can't run SSPL
Click to expand...
Click to collapse
Yep, that's right... If I only could
You may have to suck it up and pay for the unlocker from IMEI-check. I may be wrong, but I think you run that from your pc and only have to connect your trin via usb. I'm just not sure if you need a valid activesync conncection to use it - as you probably can't get that with a "zombie" trin.
Do a little research first if you are going to try.
If you try it, good luck!
http://www.imei-check.co.uk/m700unlock.php
psargent said:
I'm just not sure if you need a valid activesync conncection to use it - as you probably can't get that with a "zombie" trin.
[/url]
Click to expand...
Click to collapse
I indeed need an active sync connection, which I have.....
....during 10 seconds or so (only just after I rebooted the TRIN)
I also tried to use this tool in Bootloader menu. It's able to set up a connection through USB, the screen on my PDA goes gray and the message ".....ERROR" appears on the screen of my PC. After that the TRIN reboots and freezes up again . Fortunately I did not pay for the tool yet, i just downloaded it)
However I appreciate your help very much!
psargent said:
You may have to suck it up and pay for the unlocker from IMEI-check. I may be wrong, but I think you run that from your pc and only have to connect your trin via usb. I'm just not sure if you need a valid activesync conncection to use it - as you probably can't get that with a "zombie" trin.
Click to expand...
Click to collapse
Too bad, it's the same story, it needs OS/ActiveSync to be running to re-enter boot and flash SPL.
anymore. :--(
Yesterday i^ve make a setup for the ext_rom but with a wrong update. It was been not for the Artemis..my fault.
Now i see only th et-mobile start screen and no more.
What can i do? Thanks in advance..
hmm, please flash your p3300 whith the original software with hope that it will be alive again. otherwise you can take an hardreset on your phone but i'm sure that there will not happened.
is your PDA an original fom HTC or from any other Provider?
it`s from t-mobile
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?
dr.moppi said:
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?
Click to expand...
Click to collapse
hello there!. i have the same problem, did you manage to get a usb connection? i can't flash it...
Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.
arvind09 said:
Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.
Click to expand...
Click to collapse
Please tell me how can i get the t-mobile stock rom or can you give me the link, thanks
Shipped ROM's in English - http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
To get into bootloader - hold down the record/voice command button (top left along the side of the phone) and use the stylus to press the recessed reset button on the lower left side of the phone (same side as the other boutton you hold down) Keep holding the record button as you hit and release the reset button, you will eventually see a screen with color bars on it. At this point you will be able to get a USB connection, but not an active sync. Try to start the ROM file when the phone is in this state and connected to your computer.
What is the original language/carrier for your phone?
MDA Compact III stops in T-mobile logo screen
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?
Hi I have the same problem. I have the B&B3.7 and get stuck in the splash screen. I could enter to the bootloader mode and use some commands of the mtty.
I have my old rom, how may i load it to the pda? I have a SD and a tytn to load something in it.
Thanks!
Hernan
ftsv said:
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?
Click to expand...
Click to collapse
run uspl first!!! you can then run installation from any provider of your choice.
http://forum.xda-developers.com/showthread.php?t=311403
USPL cannot be run if your phone is stuck into bootloader?
It starts counting, askts to copy the same information again several times, and get stuck at 50... how is this possible, anyone has the original HTC Dutch rom ? May be the WM5 also! Thanks!
same problem but with no display
i have done the same mistake
have tried to upgrade my T-MOBILE MDA COMPACT III(aka htc p3300) with the HTC TOUCH ROM
it started to upgrade and an error occured
then i have lost the display and all
when i connect it to my laptop using USB i hear a beep in my computer but active syn didnt find any device
i dont know what to do now..please help me it has to be recovered
there must be some way pls pls anyone help me to get my working phone back
will appreciate your concern
thanks
Regards
Faraz Feroz
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work
y_bother said:
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work
Click to expand...
Click to collapse
thanks Y_Brother
i have downloaded the new rom but it doesnt seem to work too
I have a Cingular 8525 running WM5 that is stuck in bootloader screen. I have tried to soft and hard reset ... just boots back to the same screen, I can't turn it off once in the screen and when i sync via usb to the pc i get the message that the "usb device that is connected is malfunctioning" I have not done any upgrading at all and the phone worked perfectly right up till the time i powered it down and restarted into the bootloader screen.
Please can someone out there help me with this issue?
Zulu137 said:
I have a Cingular 8525 running WM5 that is stuck in bootloader screen. I have tried to soft and hard reset ... just boots back to the same screen, I can't turn it off once in the screen and when i sync via usb to the pc i get the message that the "usb device that is connected is malfunctioning" I have not done any upgrading at all and the phone worked perfectly right up till the time i powered it down and restarted into the bootloader screen.
Please can someone out there help me with this issue?
Click to expand...
Click to collapse
same problems, run perfect before with schaps wm6 rom then flash to faria wm6.1... not feel good with faria. try to flash with other rom then the problem start ..
how to recover ....... please help
Asfarizal said:
same problems, run perfect before with schaps wm6 rom then flash to faria wm6.1... not feel good with faria. try to flash with other rom then the problem start ..
how to recover ....... please help
Click to expand...
Click to collapse
Manage to solve the problem ...thanks WIKI !!
Go to Bootloader mode: Hold side OK and POWER buttons together and reset with stylus
Then Flash to any ROM you want !!
Thanks .... But
Thanks for the reply ... but i have no idea how to do what you tell me, I am new to all this phone "stuff" as a matter of fact this is the first time that i am ever using one of these forums. I have read till i am cross eyed but dont actually understand what you are talking about ... now don't let that scare you away as i am willing to learn and i am not braindead ... you all had to start sometime in this, not so. I get that i need to try and reflash my rom...
so is there some type of rom update software that i need? ... what is a hard SPL?? ... and who is Schaps?? .. sorry guys to do this to you but i would like to get into this game and i need some ( well maybe a lot ) of pointers.
Thanks for your time.
1. Search for "mr vanxs guide" so you have an idea on what you're doing.
2. OK, as Asfarizal said "Go to Bootloader mode: Hold side OK and POWER buttons together and reset with stylus". If you cant work out what the buttons are, go to the manual. it will tell you.
3. type in "hard SPL" in search on the forum & download the .zip or .rar file. this should have 2 files inside when opened,
a). RUUWrapper.exe and
b). RUU_signed.nbh
sync Hermes and double click .exe file. follow prompts.
4. find a rom that you want (would suggest TNT SE as a fairly good rom for noobs... good and stable, no problems...) Again download, then (and this is personel preference) format an sd card fat 32 and copy RUU_signed.nbh into root directory. Rename it Hermimg.nbh. Put into Phone and put into bootloader(make sure the battery is more than 50%) follow prompts. This should get you out of trouble. You can also sync your Phone and double click on the RUUWrapper.exe HOWEVER, if you should reset your computer, pull out the usb cable or have anything else happen to the computer that interrupts the flashm, you could end up with a worse brick than you have now. try to read up on flashing (search for "mr vanxs guide") and this should help you a lot if you have other questions. Good luck and happy flashing......
Thank You
I will follow the instructions you gave and try to get it going this weekend.
Thank you so much for your time
Zulu137 said:
Thanks for the reply ... but i have no idea how to do what you tell me, I am new to all this phone "stuff" as a matter of fact this is the first time that i am ever using one of these forums. I have read till i am cross eyed but dont actually understand what you are talking about ... now don't let that scare you away as i am willing to learn and i am not braindead ... you all had to start sometime in this, not so. I get that i need to try and reflash my rom...
so is there some type of rom update software that i need? ... what is a hard SPL?? ... and who is Schaps?? .. sorry guys to do this to you but i would like to get into this game and i need some ( well maybe a lot ) of pointers.
Thanks for your time.
Click to expand...
Click to collapse
Looks like you've got a lot of reading to do, and a problem to sort out. Firstly a couple of answers...
Schaps is a Rom Cooking guru (makes custom versions of WM5, WM6 etc). When you get your phone sorted out I'd recommend trying one of his roms.
Hard SPL. The SPL is part of the bootloader which effectively dictates how a rom is flashed and what roms can be flashed. HardSPL is a custom version of this which allows you to flash any rom from any carrier. It also protects against a bad flash in many cases. It is recommended before you try flashing any new roms or radio roms. Use Hard-SPL-V7 at the bottom of the first post here.
The Rom upgrading software is contained in any of the cooked or carrier supplied roms. It is normally a .zip file which cotains 2 files: xxxxxRUU.exe and RUU_signed.nbh. You run the .exe file from your PC when connected to your phone via USB. More details of how to do this are in MrVanx's guides. Also other resources here.
Now to try to sort your phone out...
What is displayed on your screen when in bootloader mode? It should be something like this:
HERM200
IPL-1.04
HERM200
SPL-2.10.Olipro (This is HardSPL V7)
If you don't have an Olipro SPL then you need to get HardSPL onto your phone. If you haven't done any upgrading and have had the phone from new then I guess you don't have hardSPL.
Now you need to fix your USB Malfunctioning problem. I can't help too much here except to suggest trying a different cable, different USB port or different PC. Also, if you are running Vista try an XP maxhine. When you connect to the PC does your phone show Serial or USB on the screen? If you can't get a USB connection, all is not lost - you can re-flash your rom using an SD card, method here.
There is a thread about un-bricking phones which may help.
There are various diagnostic tools (which can also screw your phone if used incorrectly). The favourite of these is MTTY but you need a USB connection to use this.
If your phone is in warranty I'd recommend getting your supplier to sort it out, but if not I'd try to re-flash an ORIGINAL supplier rom (Cingular I guess). You can get links to the official supplier roms here.
I think (might be wrong) that sometimes when stuck in bootloader you need to flash an official rom, not a cooked one to recover your phone - then you can run HardSPL and then flash cooked roms again.
Cingular 8525 stuck in bootloader
Thanks for the reply ... lots of great input.
Now to answer some of your questions.
1) When I power up the phone (only pushing the power button ) it goes straight into the bootloader screen without pushing any other buttons, and it displays
HERM100
IPL-1.01
HERM100
SPL-1.06
Then at the bottom in the white bar it says "Serial"
The only way that i have found to power it down again is to remove the battery, there is no response from any single buttons after it is in bootloader
the soft reset and hard reset work but it just goes right back to the bootloader screen after.
2) The USB malfunction. This only started after the phone "crashed" and before that it worked great ... well i only used it to sync up to my work pc for the contacts and to get pictures onto my hard drive.
all the PC's that i use are running XP. I have tried my home PC and my Laptop
and the work PC and all of them have their own cables and they all say the same thing ... "the USB device is malfunctioning"
I am sure that when i get the phone going again the USB will start to function again.
3) Phone warranty ... I bought the phone off e-bay from a store in new york about 10 months ago as a "new unlocked cingular 8525" it was new and unlocked, but i have no idea how they unlocked it. I would assume that there would be no warranty now and in any case i live in Canada and would have to ship it down to the states to an AT&T repair center and that sounds like a nightmare to me with the customs and so on.
I will give you a little more background on the problem. the phone worked like a charm without any problems at all for the 10 months that i had it, then the morning of the crash the phones alarm did not go off in the morning and i was almost late for work ... i did not pay it any further attention untill at 3:26pm
that afternoon the alarm went off ??????? (it was set for 6:05am) so i checked the main clock time, it was right. I then checked the alarm time, it was right ??? So i figured that something must have just got confused, so i powered down the phone with the power button to just restart it and while it was powered down i removed the battery to take the oportunity to to clean all those fuzzies and dust that collect in the battery compartment out and put it all together and powered it up again (just by pushing the power button) and this wierd red, green, blue and white screen appeared and that is all that i have seen since ???
I hope that answers your questions and i will start going through the links that you sent and get to reading ... will there be a pop quiz ... lol
Thanks again for your time and i very much appreciate all the time that all of you have spent on me and my phone ..... I know that you all just feel bad for me because i now have to use a Motorolla V551 ... lol
Great Work
ultramag69 said:
1. Search for "mr vanxs guide" so you have an idea on what you're doing.
2. OK, as Asfarizal said "Go to Bootloader mode: Hold side OK and POWER buttons together and reset with stylus". If you cant work out what the buttons are, go to the manual. it will tell you.
3. type in "hard SPL" in search on the forum & download the .zip or .rar file. this should have 2 files inside when opened,
a). RUUWrapper.exe and
b). RUU_signed.nbh
sync Hermes and double click .exe file. follow prompts.
4. find a rom that you want (would suggest TNT SE as a fairly good rom for noobs... good and stable, no problems...) Again download, then (and this is personel preference) format an sd card fat 32 and copy RUU_signed.nbh into root directory. Rename it Hermimg.nbh. Put into Phone and put into bootloader(make sure the battery is more than 50%) follow prompts. This should get you out of trouble. You can also sync your Phone and double click on the RUUWrapper.exe HOWEVER, if you should reset your computer, pull out the usb cable or have anything else happen to the computer that interrupts the flashm, you could end up with a worse brick than you have now. try to read up on flashing (search for "mr vanxs guide") and this should help you a lot if you have other questions. Good luck and happy flashing......
Click to expand...
Click to collapse
Thanks a lot man & great work i unbricked my Herm100 with method u mention above thanks a lot & great job keep it up
I also have this problem.
I d/l Hard-SPL-V7
and when i run RUUWrapper.exe
I get an error saying the application failed to initialize properly (0xc0000135)
What's going on?
How do i fix this?
this happened when i was trying to unlock the phone.
Thanks
need help
when i switch on my orange herm100 it shows On the bootloader screen is displayed:
HERM100
I PL-1.01
HERM100
SPL-1.40.01ipro
history : i buy unlocked orange phone
fewdays back i found no imei ,
yesterday i try to flash by micro sd but in gsm stage its gets hang no progress after extrom stage
IPL - OK
BOOTLOADER - OK
SPLASH1 - OK
SPLASH2 - OK
EXTROM - OK
GSM - (NO ACTION)
OS -
i tryed several time no action, i cant connect by mini usb.
PLEASE help me
tell me which it the right rom to chose? step by step procedure..
how to rectify imei?
thanks and regards
kirtibas
kirtibas, sorry it took so long to reply, 1st thing I'd do is upgrade to SPL 2.10 olipro. This is safer to use than others. then I'd suggest reflashing a stock rom to see if that works. After stock rom works then use a cooked rom as your heart desires... Cheers...
Hey folkes
I dropped my phone yesterday. First the display would'nt show anything but this morning tha display worked fine but the touch does'nt work so i need to send it to the servicepartner that my provider uses.
Should i (un) hard spl and install a generic rom? Is there anything else i should do so they cant se that i used non generic roms?
/A from now on a Nokia N95 user again :-(
Yes, definitely.
Flash a generic ROM back on first, then flash the original SPL back.
I just hope you can do it without the touch facility working.
ZenithUK said:
Yes, definitely.
Flash a generic ROM back on first, then flash the original SPL back.
I just hope you can do it without the touch facility working.
Click to expand...
Click to collapse
You can do this from a computer with the RUU so there isn't a problem I guess.
Good luck dude!
If I were you, I try first to make a hard reset in order to see if touch is really dead or not...
Can i put back the stock SPL with the micro SD card? The problen now is that i cant run the RUU becurse i can't configure my device. I am pretty much stuck at "Tap the screen to configure your device" I knew before that i could get stuck here but i was able to flash the stock rom anyway after the hardreset.
But when i try to put the stock SPL back the RUU says "Connection error"
So my onlu option at this point is if this works with the micro SD method.
Any experience anyone?
Badankan78 said:
Can i put back the stock SPL with the micro SD card? The problen now is that i cant run the RUU becurse i can't configure my device. I am pretty much stuck at "Tap the screen to configure your device" I knew before that i could get stuck here but i was able to flash the stock rom anyway after the hardreset.
But when i try to put the stock SPL back the RUU says "Connection error"
So my onlu option at this point is if this works with the micro SD method.
Any experience anyone?
Click to expand...
Click to collapse
You can still run RUU, but make sure you flash the stock rom first.
To get RUU to work, start your x1 in boot loader mode (turn it off, then press and hold both power and volume down until the tri colour screen comes up), now connect your phone to your pc with the usb cable and run the RUU.