HEY ...
IVE IMATE PDA2 , TELL ME WHICH WIDCOMM BLUETOOTH STACK SHOULD I INSTALL TO RUN BUZZONE 2.0 SOFTWARE HOW SHOULD I UPGRADE MY ROM (IF THERE IS ANY UPGRADED VERSION FOR ROM SO MENTION ITS DOWNLOADING LINK), WHEN I RUN BUZZONE IT HANGS MY DEVICE ...WHAT TO DO TELL ME ALL SOFTWARES & THEIR DOWNLOADING LINKS ...WILL IT WORK OR NOT ? ? ? THNX IN ADVANCE ... :roll:
i have htc p3300 and i upgrade rom but in the end my htc is dead it just display
the screen booter
can't anybody tell me how to make my htc to be orginal.
i have find many rom but when i upgrade it ,i have an
ERROR [294] : INVALID VENDER ID
please help me
i got above error please help
I also had the same problem.
Any can help?
My device is with the Rom in Portuguese and I want the English one.
Cheers,
Leo
Invalid vendor ID
This means your phone is locked for a particular country and the rom is not meant for that country.
If its P3400 u can do Hard Spl from Olipro thread
NOT FOR P3400i
hi all master
htc p4350 update rom problem look image help plase
error code 294 ınvalıd vender ıd
how to update room prosedure ???
Make goldcard and you can flash any rom.
Hey guys,
i have a big problem,
my t-mobile mda touch (htc touch) (elfin 256/128) is stuck at the operator logo, i have tried the CID unlock and the software says all OK, i have tried to flash a new rom ... error!
10 hours later i know this:
my htc elfin is not unlocked (cid) , i have forgot to save my original firmware,
i have found a firmware with same device id and cid id but its says errorcode 270 ^^
the bootloader is OK with spl 2.26 and ipl 1.17.0002 and mtty connection is possible.
now my question is: can i save my elfin only with the "goldcard" method or i have now a BIG problem?
i dont know now what i can do, im tired, i sit 12 hours with google and forum search and my elfin is bricked...
help pls
thank you
(sorry for my english)
device:
Touch version : Elfin
Device ID : ELF030050
CID : T-MOB101
IPL : 2.26.0002
SPL : 2.26.0000
ROM Version : 2.26.111.53
ExtROM Version : 2.26.111.153
Operator Version: None
AKU Version : 0.4.2
Page Pool (MB) : 12
RAM Size (MB) : 128
ROM Size (MB) : 256
Model No. : ELF0301
Part Number : 99HEL001-00
Magna00 said:
Hey guys,
i have a big problem,
my t-mobile mda touch (htc touch) (elfin 256/128) is stuck at the operator logo, i have tried the CID unlock and the software says all OK, i have tried to flash a new rom ... error!
Click to expand...
Click to collapse
What exactly did you do to end up stuck at bootscreen?
Was this the result of trying to CID-unlock?
Magna00 said:
10 hours later i know this:
my htc elfin is not unlocked (cid) , i have forgot to save my original firmware,
Click to expand...
Click to collapse
That's not really a problem..
Magna00 said:
i have found a firmware with same device id and cid id but its says errorcode 270 ^^
Click to expand...
Click to collapse
Which rom did you use?
Magna00 said:
the bootloader is OK with spl 2.26 and ipl 1.17.0002 and mtty connection is possible.
Click to expand...
Click to collapse
Given the fact that you have an Elfin and your IPL is 1.71.0002, my guess is that you flashed a rom meant for the Elf(128/64).
Magna00 said:
now my question is: can i save my elfin only with the "goldcard" method or i have now a BIG problem?
Click to expand...
Click to collapse
Follow the steps from the first post here...
Regards!
oops i see my problem ... holy sh...
i have used this here - first post
http://forum.xda-developers.com/showthread.php?t=408637
have i bricked the phone?
because the "unbrick" firmware dont help me and give error invalid vender id 294
can anyone help me? what can i do now? goldcard is at the moment not possible, because i dont have a compatible card reader or phone...
answer
try spl 3.10 and ipl 3.10
your problem may be resolved
i used this here
http://forum.xda-developers.com/showthread.php?t=408637&highlight=ipl+3.10
update error 270
i think ur phone is not cid unlocked try hardspl3.10 and ipl 3.10 again.
After that try to flash with onyx 6.14 rom
I think your phone will come alive,because my phone also hav the same problem when i unlocked the different spl and ipl.
i have post it, that the phone is not cid unlocked,
i tryed hardspl 3.10 from here
http://forum.xda-developers.com/showthread.php?t=445666&highlight=hardspl
see picture for my problem
he dont know the image from my phone, normal?
Are you able to boot into windows (on your pda)?
YES
Then you can use SoftSPL (aka "white screen method") to flash a HardSPL (or a USPL) in order to CID-Unlock your pda.
NO
Then you CAN NOT use SoftSPL (aka "white screen method") to flash a HardSPL (or a USPL) in order to CID-Unlock your pda.
Is there any other solution?
Flash an Official Shipped ROM with CID & MID that match your pda's
Flash the "Unbricker rom"(try both via usb and from sd-card)
Use the "GoldCard" method (which requires an Official Shipped ROM with MID that matches your pda's)
Good luck!
PS: I'm not posting ANY links in order to make you search on your own.
Sorry, but I feel that I have posted the same things over and over again...
thx for your answer, anyone read my post here?
1. im not able to boot into windows on my pda ...
2. i have read a lot of threads here in this forum
3. i dont find a shipped rom with my cid and mid .... when you have one for me, post the link please!
4. with the unbricker rom per usb i get the message error 270 (see post 6)
and flash with sd-card .. no error .. no flash .. i see the bootloader (i tried 2 micro sd cards)
5. goldcard method (see post 4) i dont have the hardware here and nobody has a windows or android pone ^^
and now?
other question:
i need for the goldcard exactly my original rom? i have think i can use any rom with this method ... damn it
so now i have it ... i have read the sd card cid with my gps device ... that run on win ce ...
then i have great a goldcard image and then i used the o2 rom update and now its fully functional
48h working and nothing happend and only what i need is a goldcard -.-